Bosch HMV3051U Installation Instructions - Page 27

Mounting the microwave oven Note:ĄIf the bottom of the upper cabinet is recessed or has front overhang, you will need to prepare 2" x 2" (51 mm x 51 mm - depth equivalent to cabinet recess or overhang) filler blocks to provide additional support for the bolts: D mark the center of each filler block and drill a \ (9,5 mm) diameter hole D align filler blocks over the three openings on top of the microwave oven and attach with masking tape (see Figure 1) Note:ĄUse at least two people to install the microwave oven. Do not grip or use handle during the installation. Note:ĄWhen mounting the microwave oven, thread power cord through hole in bottom of top cabinet. Keep the cord tight and do not pinch it, especially when mounting flush to bottom of cabinet. Do not pull the cord to lift the oven. 1. Lift the microwave, tilt it forward, and hook slots at back bottom edge onto four lower tabs of the mounting plate. 2. Rotate the front of the oven up against cabinet bottom. Figure 1 3. Insert a selfĆaligning screw through top center cabinet hole. Temporarily secure the oven by turning the screw at least two full turns after the threads have engaged. 27