Bosch NWC-0495-20P Operating Instructions
Bosch NWC-0495-20P Manual
 |
View all Bosch NWC-0495-20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Bosch NWC-0495-20P manual content summary:
- Bosch NWC-0495-20P | Operating Instructions - Page 1
Dinion IP NWC-495-10P | NWC-495-20P en Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 2
- Bosch NWC-0495-20P | Operating Instructions - Page 3
2.1 Power 2.2 Network (and power) 2.3 Video service monitor 2.4 Alarm connector 3 Mounting 3.1 Lens mounting 3.2 Mounting the camera 4 Quick set-up 4.1 Back focus adjustment 4.2 Accessing and navigating quick set-up menu Bosch Security Systems Operating Instructions | en - Bosch NWC-0495-20P | Operating Instructions - Page 4
How to use the navigation keys Install menu Adjustment procedure DC-iris Lens Adjustment procedure Manual-iris Lens Adjustment procedure Video-iris Lens Install IP address submenu Defaults Dinion IP 27 28 28 29 29 29 30 5 Network connection 31 5.1 System requirements 31 5.2 Establishing the - Bosch NWC-0495-20P | Operating Instructions - Page 5
Dinion IP 7.4 7.4.1 7.4.2 7.4.3 7.5 7.5.1 7.5.2 7.5.3 Camera settings ALC Shutter/AGC Day/Night Enhance Color Back Light Compensation (BLC) Installer options Recording Type Storage information iSCSI settings iSCSI IP address iSCSI LUN map Target IP in Bosch Security Systems Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 6
server IP address Layout Destination address Sender name Send e-mail for testing Relay Settings Alarm out Service video servers Installation Establishing the connection Connect on alarm Connecting with a Web browser Closing the connection Dinion IP 77 79 79 80 80 81 82 84 84 84 85 85 85 85 85 86 87 - Bosch NWC-0495-20P | Operating Instructions - Page 7
Repairs Transfer and disposal 11 Troubleshooting 12 12.1 12.2 12.2.1 12.2.2 Specifications Dimensions (mm/inch) Accessories Recommended lenses Power transformers 13 Glossary | en 7 102 103 103 103 103 104 106 108 109 109 109 110 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 8
8 en | Dinion IP Important safety instructions Read, follow, and retain all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. Type numbers: NWC-495-10P, NWC-495-20P 1. Cleaning - Unplug the unit from the outlet before - Bosch NWC-0495-20P | Operating Instructions - Page 9
has occurred, such as: - the power supply cord or plug is damaged; - exposure to moisture, water, and/or inclement weather (rain, snow, etc.); - liquid has been spilled in or on the equipment; - an object has fallen into the unit; Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 10
10 en | Dinion IP - unit has been dropped or the unit cabinet is damaged; - unit exhibits a distinct change in performance; - unit does not operate normally when the user cor- rectly follows the operating instructions. 11. Replacement parts - Be sure the service technician uses replacement parts - Bosch NWC-0495-20P | Operating Instructions - Page 11
Dinion IP | en 11 DANGER! High risk: The lighting flash and arrowhead within the death. WARNING! Medium risk: ! The exclamation point within the triangle sign alerts the user to important instructions accompanying the unit. CAUTION! ! Alerts the user to the risk of damage to the unit. - Bosch NWC-0495-20P | Operating Instructions - Page 12
12 en | Dinion IP CAUTION! - Camera Grounding - For mounting the camera in poten- tially damp environments, ensure to ground the system using the ground connection of the power supply connec- tor (see section: Connecting external power supply). - U.S.A. models only - Section 810 of the - Bosch NWC-0495-20P | Operating Instructions - Page 13
Dinion IP | en 13 FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 14
en | Dinion IP Disposal Your Bosch product recycling facility, per European Directive 2002/96/EC. Bosch has a strong commitment towards the environment. This unit much as possible. For additional information, please contact the Bosch Security Systems location nearest you or visit our web site - Bosch NWC-0495-20P | Operating Instructions - Page 15
Dinion IP Day/Night is easy to install and ready to use, and offers the best solution for demanding scene conditions. Features include: - Day/Night camera - Firmware update through flash memory - Convenient upload and download of configuration data Bosch Security Systems Operating Instructions V - Bosch NWC-0495-20P | Operating Instructions - Page 16
NWC-0495-10P NWC-0495-20P 50 Hz 60 Hz 24 VAC or 12 VDC (use class 2 power supply) or PoE (IEEE 802.3af) 1/3" Table 1.1 Dinion IP type numbers 1.2 i Unpacking Unpack carefully and handle the equipment with care. The packaging contains: - DinionXF Day/Night IP camera - CS to C lens mount - Bosch NWC-0495-20P | Operating Instructions - Page 17
camera IP network. With its MPEG-4 encoding it is ideally suited for IP communication and for remote access to digital video recorders and multiplexers. The use of existing networks means that integration with CCTV systems or local networks can be Bosch Security Systems Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 18
18 en | Introduction Dinion IP achieved quickly and easily. Video images from a single camera can be simultaneously received on several receivers. 1.4.1 Wide dynamic range A unique combination of 15-bit digital video processing that enhances sensitivity and XF-Dynamic which extends the dynamic - Bosch NWC-0495-20P | Operating Instructions - Page 19
for alarm signaling in the event of tampering with the camera. An algorithm for detecting movement in the video image is also part of the scope of delivery and can optionally be extended to include special video analysis algorithms. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 20
from Bosch Security Systems included with the package. Intelligent Video Motion Detection The intelligent video motion detection (iVMD) system of the camera uses advanced analysis algorithms with comprehensive functions for the detection of motion. V 2.5 | 2007.6 Operating Instructions Bosch - Bosch NWC-0495-20P | Operating Instructions - Page 21
2 power supply - 24 VAC or 12 VDC - push in the tabs to open the quick-connectors (these connections are not polarity sensitive). - use AWG16 to 22 stranded wire or AWG16 to 26 solid wire; cut back 10mm (0.4") of insulation. Fig. 2.1 Power connection Bosch Security Systems Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 22
22 en | Connections Dinion IP 2.2 Network (and power) CAUTION! ! Never supply power via the Ethernet connection (PoE) when power is supplied via the power connector. VIDEO ALARM DC 12V AC 24V ETH UTP Cat 5 RJ45 - connect the camera to a 10/100 Base-T network. - use a shielded UTP Category - Bosch NWC-0495-20P | Operating Instructions - Page 23
, +5V nominal, +40VDC max, DC coupled with 22kOhm pull-up to +3.3V. - Alarm in: configurable as active low or active high. - Max. 42V allowed between camera ground and each of the relay pins. Fig. 2.4 Network and power connection Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 24
when using a C-mount lens, make sure the supplied lens adapter ring is mounted onto the camera before mounting the lens. Lenses weighing more than 0.5 kg (1.1lbs) must be separately supported. Bosch Bosch Fig. 3.1 Mounting a lens Pin Video iris lens DC iris lens 1 Supply (11.5V ±0.5, 50mA - Bosch NWC-0495-20P | Operating Instructions - Page 25
the camera/lens into direct sunlight. Do not obstruct the free flow of air around the camera. NOTE! i The camera becomes quite warm when operating; this is normal. However, you should take this into account when touching the camera. Bosch Security Systems Operating Instructions V 2.5 | 2007 - Bosch NWC-0495-20P | Operating Instructions - Page 26
The Dinion IP Day/Night camera normally provides an optimal picture without the need for further adjustments. Configuration of the camera is carried out remotely via the network using a web browser. However, the camera also has an Installer menu in which basic installation settings (lens wizard, IP - Bosch NWC-0495-20P | Operating Instructions - Page 27
Dinion IP Quick set-up | en 27 Bosch 4.2 4. Lock the back focus locking button. Accessing and navigating quick set-up menu Five keys, menu. - Press the menu/select key for approximately 1.5 seconds to open the Installer menu. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 28
Select submenu Exit Description Select to optimize camera lens combination Select to set the network IP address for the camera (default address is 192.168.0.1) Exit the menu Install lens wizard submenu Function Lens Type Detected Selection AUTO, MANUAL, DCIRIS, VIDEO Set Back Focus Now Set - Bosch NWC-0495-20P | Operating Instructions - Page 29
factory default IP address is 192.168.0.1 Function IP Address Selection Description Enter an IP address for the camera. Use LEFT/RIGHT to change position in the address, use UP/DOWN to select the digit. Use SELECT to exit the address edit screen. Bosch Security Systems Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 30
30 en | Quick set-up Dinion IP Subnet Mask Gateway Exit Enter the Subnet mask (default 255.255.255.0) Enter a Gateway address. Return to the Install menu The new IP address, subnet mask and gateway address are set after you leave the menu. The camera reboots internally and the new values are set - Bosch NWC-0495-20P | Operating Instructions - Page 31
Establishing the connection The camera must be assigned a valid IP address to operate on your network. The default address pre-set at the factory is 192.168.0.1 1. Start the Web browser. 2. Enter the IP address of the camera as the URL. Bosch Security Systems Operating Instructions V 2.5 | 2007 - Bosch NWC-0495-20P | Operating Instructions - Page 32
connection Dinion IP Password protection in camera If the camera is password-protected, a message to enter the password appears. NOTE! i A camera offers , up to 20 web browsers, or 50 VIDOS or BVMS connections are supported. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 33
the camera for a Radius network, connect it directly to a PC via a crossed network cable and configure the two parameters, identity and password. Only after these have been configured can you communicate with the camera via the network. Bosch Security Systems Operating Instructions V 2.5 | 2007 - Bosch NWC-0495-20P | Operating Instructions - Page 34
camera with a browser, the processor load is displayed in the upper right of the window next to the Bosch logo. Move the mouse cursor over the icons to display numerical values. This information can help with problem solving or when fine tuning the device. V 2.5 | 2007.6 Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 35
Dinion IP Operation via the browser | en 35 6.1.2 6.1.3 Image selection You can view the image on a full screen. - Click one of the MPEG-4 Stream 1, MPEG-4 Stream 2 or M- JPEG tabs below the video image to switch between the different displays for the camera image. Digital I/O 6.1.4 Depending - Bosch NWC-0495-20P | Operating Instructions - Page 36
Dinion IP 6.1.6 1. Click the camera icon to save single images. 2. The image is saved at a resolution of 704 × 576/480 pixels (4CIF). The storage location depends on the configuration of the camera Bosch Security Systems, which can be found on the software CD supplied instructions in - Bosch NWC-0495-20P | Operating Instructions - Page 37
Dinion IP Operation via the browser | en 37 6.1.7 6. After a successful installation, two new icons for the Player and the Archive Player appear on the desktop. 7. Double click the Player icon to start the Player. Running recording program The hard drive icon below the camera images on the - Bosch NWC-0495-20P | Operating Instructions - Page 38
38 en | Operation via the browser . Dinion IP 6.2.1 6.2.2 Selecting recordings In the left section of the page, first select the partition whose image for quick orientation. If a particular sequence has been selected for playback by V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 39
Dinion IP Operation via the browser | en 39 in the time scale to jump to the position selected in this manner. The date and time display below the bar provides orientation to the second. You can control middle indicates playback at Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 40
40 en | Operation via the browser Dinion IP recording speed, left indicates rewind, and right fast forward. The fast forward or rewind speed changes, saved with the sequences. As soon as you leave the page all bookmarks are deleted. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 41
expert users or system administrators. All unit parameters can be accessed in this mode. Changes that influence the fundamental functioning of the unit (for example firmware updates) can only be made using the configuration menu. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 42
42 en | Configuration via the browser Dinion IP You can view the current settings by opening one of the configuration pages. 1. Click one of the saves only the settings in the current window. Changes in any other fields are ignored. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 43
alarm for example. Enter a name that makes it as easy as possible to identify the location unambiguously. Camera ID Each camera should be assigned a unique identifier that can be entered here as an additional means of identification. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 44
Dinion IP A camera is assigned, a service and a user camera recognizes three user names: service, user and live, which correspond to different authorization levels. - The user name service unit and also to control cameras, but you cannot change you are logged on as Service or if the unit is - Bosch NWC-0495-20P | Operating Instructions - Page 45
date. Since the unit time is controlled by the internal clock, it is not necessary to enter the day of the week. This is added automatically. 2. Enter the current time or click Synchr. PC to apply the system time from your computer to the camera. Bosch Security Systems Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 46
browser 7.2.5 Time server Dinion IP The camera supports several network time server table, note that values generally occur in linked pairs (DST start and end dates). First check the time zone setting. If it is not correct select the appropriate .6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 47
time and date overlay. It can be displayed at the Top, at the Bottom or at a position of your choice, which you have pre-defined using HyperTerminal, using the Custom option. Or it can be set to Off if no overlay of this information is to be shown. Bosch Security Systems Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 48
48 en | Configuration via the browser Dinion IP Alarm mode stamping Choose On if a text message should be overlaid in the event of an MPEG-4 data transmission to the operating environment (for example network structure, bandwidth, data V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 49
Dinion IP Configuration via the browser | en 49 structures). To do this, the camera 352 × 288/240 pixels - Profile 7: Modem For analog modem connections at 20 kBit/s, resolution 352 × 288/240 pixels - Profile 8: GSM For GSM connections Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 50
50 en | Configuration via the browser Dinion IP mation regarding data transmission are displayed and continually updated above the previews. 1. Click a tab be changed if you are completely familiar with all the configuration options. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 51
Dinion IP Configuration via the browser | en bandwidth in your network, you can limit the data rate for the camera. The target data rate should be set according to the desired picture quality × 576/480 pixels - 2/3 D1 464 × 576/480 pixels Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 52
the browser Dinion IP Default the optimum relationship between movement and image definition (focus). Selecting Manual allows you to set a value between 4 and 31 on adjusts the quality to the settings for the P-frame video quality. Selecting Manual allows you to set a value between 4 and 31 on a - Bosch NWC-0495-20P | Operating Instructions - Page 53
Dinion IP Configuration via Date/time suffix: The date and time are automatically added to the file name. When setting this parameter, please ensure that the date and time of the unit are always correctly set. Example: the file snap021606_124530.jpg Bosch Security Systems Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 54
the browser Dinion IP was stored camera Check the box to activate one or more camera inputs for the JPEG image. An enabled camera input is indicated by a check mark. NOTE! i The numbering follows the labeling of the video inputs on the actual unit. V 2.5 | 2007.6 Operating Instructions Bosch - Bosch NWC-0495-20P | Operating Instructions - Page 55
Dinion IP 7.5 Camera settings Configuration via the browser | en 55 NOTE! i If the camera is in monochrome mode, all color related menu items are disabled and cannot be accessed. 7.5.1 ALC Video level Adjust the video output level (-15 to 0 - Bosch NWC-0495-20P | Operating Instructions - Page 56
56 en | Configuration via the browser 7.5.2 Shutter/AGC Dinion IP Shutter - AES (auto-shutter) - the camera automatically sets the optimum shutter speed for manual iris lenses. The camera tries to maintain the selected shutter speed (1/60 [1/50], 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, - Bosch NWC-0495-20P | Operating Instructions - Page 57
Dinion IP Configuration via the browser | en 57 7.5.3 the maximum value the gain can have during AGC operation (0, 1, ... 26). In FIXED mode the gain is set at a predefined not scene dependent value. Select the gain setting (0, 1, ... 26). Day/Night The Flexidome IP Day/Night camera is equipped - Bosch NWC-0495-20P | Operating Instructions - Page 58
Reduction In AUTO mode the camera automatically reduces the noise in the picture. This may cause some motion blur on moving objects. Enhanced Dynamic Range In XF-DYN mode the camera automatically optimizes the contrast in the picture. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 59
Dinion IP 7.5.5 Color Configuration via the browser | en 59 White Balance - ATW: Auto tracking white balance allows the camera to constantly adjust for optimal color reproduction. - AWB HOLD: Puts the ATW on hold and saves the color set- tings. - In MANUAL mode the Red, Green and Blue gain can be - Bosch NWC-0495-20P | Operating Instructions - Page 60
60 en | Configuration via the browser 7.5.6 Back Light Compensation (BLC) Dinion IP When ON, the video level is optimized for the selected area of the image. Level adjusts the balance between the selected BLC area and its surrounding. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 61
Dinion IP 7.5.7 Installer options Configuration via the browser | en 61 7.6 Select the synchronization method for the camera: Internal for free running camera operation; Line Lock to lock to the power supply frequency. You can disable the buttons on the camera to prevent unauthorized change of - Bosch NWC-0495-20P | Operating Instructions - Page 62
62 en | Configuration via the browser Dinion IP 7.6.1 i Type Select the desired storage medium to subsequently configure the recording parameters. NOTE! immediately; you cannot undo this process. 3. Click Close to close the window. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 63
Dinion IP 7.7 iSCSI settings Configuration IP address 1. Enter the IP address of the required iSCSI server here. 2. Click Connect. The connection to the IP address is estab- lished. The iSCSI LUN map field contains the corresponding logical drives. Bosch Security Systems Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 64
en | Configuration via the browser Dinion IP 7.7.2 i iSCSI LUN map The be read due to the network topology you must enter the data manually so that the camera can access the drive. In this case you should ensure that storage device. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 65
Dinion IP Configuration via the browser | en being used by another person, you can decouple the drive and connect the drive with the camera. 1. Double-click a drive that is already being used in the LUN map. You to close the window. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 66
66 en | Configuration via the browser 7.8 Partitioning Dinion IP 7.8.1 A partition can be set up for recordings of the camera in a similar manner to the partitioning often found on creating parti- tions. The first window appears. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 67
Dinion IP . Configuration via the browser | en 67 2. Read the information text in the upper section of the window. 3. you complete the configuration in the last window by clicking Finish. 1. Switch to the last window if necessary. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 68
68 en | Configuration via the browser Dinion IP 7.8.2 2. Click Finish to complete the configuration. All settings are now transferred to the unit and important sequences on the computer's hard drive before modifying the partition. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 69
Dinion IP Configuration via the browser | en 69 1. Click Edit partition. - A new window with the entries for the selected have been deleted. Number of alarm tracks NOTE! i Alarm tracks must be set up for alarm recording. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 70
70 en | Configuration via the browser Dinion IP The unit uses a special recording mode during alarm recording for optimal usage of storage capacity. As 's hard drive. - Click Format! to delete all recordings in the current partition. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 71
Dinion IP Configuration via the browser | en 71 7.8.4 ! Deleting partitions You can delete a to individual days or times of day in the recording scheduler. Modify the names of the recording profiles on the tabs in the Recording planner page. Bosch Security Systems Operating Instructions V 2.5 - Bosch NWC-0495-20P | Operating Instructions - Page 72
72 en | Configuration via the browser Dinion IP 1. Click one of the tabs to edit the corresponding profile. 2. Click Default to return all settings to used during an active recording. Encoder Select which data stream to record here. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 73
Dinion IP Configuration via the browser | en 73 Alarm track recording This parameter is only active, if the alarm tracks have as the standard profile. Motion detection/video alarm Select the alarm type that is to trigger a recording. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 74
| Configuration via the browser Dinion IP 7.10 Recording scheduler Set the settings for that weekday. This allows you to apply the settings for Sundays to other days of the week. 1. Click a profile. 2. Click a field in the table, . V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 75
Dinion IP Configuration via the browser | en 75 5. Days that have already been defined are shown in the table. 2. Click Add. This opens a new window. 3. Select the desired date from the calendar. Drag the mouse to select a range of dates Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 76
Dinion IP the camera. Night mode. If None is selected, the alarm will only be forwarded via the IP connection. Name You can enter a name for each alarm input, which is then displayed below the icon for the alarm input on the Livepage during configuration. V 2.5 | 2007.6 Operating Instructions Bosch - Bosch NWC-0495-20P | Operating Instructions - Page 77
Dinion IP 7.11.2 Alarm connections Configuration via the browser | en 77 You can select the response of the camera when an alarm occurs. In case of an alarm, the camera can automatically establish a connection to a predefined IP , for Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 78
one of the previously specified IP addresses after each restart, connection breakdown or network failure. NOTE! i Stream 2 is always transmitted for automatic connections. This should be taken into account when assigning the profile. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 79
Dinion IP 7.12 VCA Configuration via the browser | en 79 7.12.1 The camera contains an integrated Video Content Analysis (VCA), which can detect and analyze changes in the signal. Such changes can be due to movements in the camera up. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 80
en | Configuration via the browser Dinion IP NOTE! i On the Livepage day and night to ensure that the video sensor is operating as intended. NOTE! i For indoor surveillance, ensure constant lighting of the areas during the day and at night. V 2.5 | 2007.6 Operating Instructions Bosch - Bosch NWC-0495-20P | Operating Instructions - Page 81
Dinion IP Configuration via the browser | en 81 7.12.4 Sensitivity Sensitivity is available for the Motion+ analysis type. The basic sensitivity of the motion detector can be adjusted for the environmental conditions to which the camera is subject. The sensor reacts to variations in the - Bosch NWC-0495-20P | Operating Instructions - Page 82
Configuration via the browser Dinion IP 7.12.5 i 4. cameras and video cables by means of various options. Run a series of tests at different times of the day and night cleaning activities in the direct field of vision of the camera. Scene too bright Activate this function if tampering associated - Bosch NWC-0495-20P | Operating Instructions - Page 83
Dinion IP Configuration via the browser | en you to detect tampering that would otherwise not be detected, for example if the camera is turned. 1. Click Reference to save the currently visible video image as a otherwise be triggered. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 84
Dinion IP not have a video receiver. In this case the camera automatically sends an e-mail to a user defined e-mail IP address Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail Transfer Protocol). Outgoing e-mails are V 2.5 | 2007.6 Operating Instructions Bosch - Bosch NWC-0495-20P | Operating Instructions - Page 85
Dinion IP Configuration via the browser | en 85 7.13.3 i sent to the mail server via the address you entered. Otherwise and sent. 7.14 Relay Settings Here, you can make the settings for the alarm sources and alarm connections. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 86
7.14.1 Alarm out Dinion IP Select the event that will trigger the alarm output; - an internal motion detection/VCA, - an internal day/night switching, or - an manually (for example for testing purposes or to operate a door opener). V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 87
active until the device is restarted. - Click Set after entering a new IP address. - To do this, enter the old IP address followed by / reset (for instance 192.168.0.80/reset) in the address bar of your web browser. When the camera is Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 88
ports. The camera uses the TLS 1.0 protocol. Ensure that the browser has been configured to support this protocol. Also ensure that Java application support is activated (in the Java Plug-in Control Panel of the Windows Control Panel). V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 89
sufficient for transmission of the maximum data rate generated by the camera. 1. SNMP host address / 2. SNMP host address The camera supports the SNMP V2 (Simple Network Management Protocol) for managing and monitoring network compo- Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 90
address. If not, controlling systems, such as VIDOS or BVMS, will not find the camera. 7.15.2 Multicasting In addition to a 1:1 connection between an encoder and a single receiver (unicast), the camera can enable multiple receivers V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 91
Dinion IP not supported. The TCP protocol does not support multicast connections. A special IP address multicast-enabled network. The network must support group IP addresses and the Internet Group Management of data streams in unit). The camera supports multi-unicast connections for up to five - Bosch NWC-0495-20P | Operating Instructions - Page 92
| Configuration via the browser Dinion IP 7.15.3 i Port If port" on page 88). NOTE! Encrypting video data requires a lot of computing power. You can select individual data streams for encryption. When a key is generated for . V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 93
information This window is for information only and cannot be modified. Keep this information at hand when seeking technical support. For example, you can copy the hardware and firmware version numbers to paste them into an e-mail. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 94
| Configuration via the browser 7.15.5 Livepage configuration Dinion IP In this window, you can adapt the appearance be a connection in order to display the image. The image files are not stored on the camera. 1. Mark the check boxes for the information to be displayed on the Livepage. The selected - Bosch NWC-0495-20P | Operating Instructions - Page 95
Dinion IP Configuration via the browser | en 95 Logo URL Enter the path to a suitable background in the live video stream. Show event log The event messages are displayed with the date and time in a field next to the video image. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 96
96 en | Configuration via the browser Dinion IP 7.15.6 Show system log The system messages are displayed with the date and time in a field next to the video image the activation key to release additional functions or software modules. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 97
Thus a camera can be serviced and updated remotely without requiring a technician to make changes to the unit on site. The latest firmware can be obtained from your customer service center or from the Bosch Security Systems download area. Bosch Security Systems Operating Instructions V 2.5 | 2007 - Bosch NWC-0495-20P | Operating Instructions - Page 98
en | Configuration via the browser Dinion IP NOTE! A firmware update resets all camera parameters to their factory default values. If you wish to retain the old values first i save the configuration by performing a configuration download. After the firmware update you can reload your parameter - Bosch NWC-0495-20P | Operating Instructions - Page 99
Dinion IP Configuration via the browser | en 99 camera be called remotely? - Does the camera transmit all the data required? - Does the camera respond as desired to alarm events? - Is it possible to control peripheral devices if necessary? Bosch Security Systems Operating Instructions - Bosch NWC-0495-20P | Operating Instructions - Page 100
between video servers Dinion IP 8 8.0.1 i Connections between video servers A camera can be used Connect them to the power supply. NOTE! Make sure the devices are configured for the network environment and the correct IP address for the | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 101
Dinion IP Connections between video servers | en Its home page is displayed. Under Video sources on the page Connections, select the camera. A JPEG snapshot of the selected video source is displayed on the page. 2. connected monitor. Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 102
Dinion IP 9 Operation with decoder software VIDOS The camera camera with VIDOS. BVMS The Bosch Video Management System (BVMS) is a unique enterprise IP with additional analog camera and audio inputs. DiBos supports various functions of the camera, such as Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 103
or network technology specialists). In case of doubt, contact your dealer's technical service center. 10.2.1 Transfer and disposal The camera should only be passed on together with this installation guide. The unit contains environmentally hazardous materials that must be disposed of according - Bosch NWC-0495-20P | Operating Instructions - Page 104
Troubleshooting Dinion IP 11 Troubleshooting If you cannot resolve a fault, please contact your supplier or system integrator or go direct to Bosch Security Systems Customer Service transmission to remote location. Possible causes Defective camera. Faulty cable connections. No connection estab- - Bosch NWC-0495-20P | Operating Instructions - Page 105
IP address. The unit is not opera- Power failure during pro- Have the unit checked by Cus- tional after firmware gramming by the update file. tomer Service possible. support the use of initiator parameter configuration page. identification. Bosch Security Systems Operating Instructions V 2.5 - Bosch NWC-0495-20P | Operating Instructions - Page 106
Rated supply voltage NWC-0495-10P NWC-0495-20P PAL NTSC 752x582 768x492 24 VAC or 12 VDC or Power-over-Ethernet (IEEE 802.3af) 12-28 VAC (50/60 Hz) Min illumination 11-36 VDC < 0.4 lux Imager Resolution SNR Video output Synchronization Shutter Day/Night Sens Up Auto black AGC XF-DYN - Bosch NWC-0495-20P | Operating Instructions - Page 107
Dinion IP Specifications | en 107 Image resolutions (PAL/NTSC) Total delay Image refresh rate Field/image- 120 ms (PAL/NTSC, MPEG-4, no network delay) 1 ... 50/60 fields/s adjustable (PAL/NTSC) TCP, UDP, IP, HTTP, IGMP V2, ICMP, ARP Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 108
108 en | Specifications 12.1 Dimensions (mm/inch) 118 (4.646") 34 (1.339") 85 (3.346") 1/4"-20 UNC Dinion IP 48 (1.889") 1/4"-20 UNC 123 (4.843") 67 (2.638") 59 (2.323") Dimensions in mm (inches). V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 109
, 4-pin LTC 3664/30 Varifocal Lens - 1/3-inch, 3.0 - 8 mm, DC-iris, CS-mount F/1.0-360, 4-pin Power transformers TC 120PS Power Supply Unit - 110-120 VAC/15 VDC, 50/60 Hz, 300mA TC 220PS Power Supply Unit - 230 VAC/15 VDC, 50 Hz, 10 VA Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 110
Glossary Dinion IP 13 Glossary Brief explanations of some of the terms and abbreviations found in this user guide are to the available services (LAN, VLAN, WLAN). Address Resolution Protocol: a protocol for mapping MAC and IP addresses Unit of IP Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 111
Dinion IP IP IP address ISDN JPEG kBit/s stops separating the bytes, for example "209.130.2.193". Integrated Services Digital Network An encoding process for still images (Joint Photographic Experts computer clocks over the Internet Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 112
112 en | Glossary Dinion IP RS232/RS422/RS485 RTP SNTP SSL Subnet mask TCP Telnet TSL TTL UDP URL UTP WAN Wide area network See wide area network A long distance link used to extend or connect remotely located local area networks V 2.5 | 2007.6 Operating Instructions Bosch Security Systems - Bosch NWC-0495-20P | Operating Instructions - Page 113
Dinion IP Glossary | en 113 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 - Bosch NWC-0495-20P | Operating Instructions - Page 114
- Bosch NWC-0495-20P | Operating Instructions - Page 115
Bosch Security Systems Robert-Koch-Straße 100 D-85521 Ottobrunn Germany Telefon 089 6290-0 Fax 089 6290-1020 www.boschsecuritysystems.com © Bosch Security Systems, 2007
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
 |
 |
Dinion IP
NWC-495-10P | NWC-495-20P
en
Operating Instructions