Bosch SHE3AR55UC Instructions for Use - Page 12

Rack Accessories, Adding Detergent and Rinse Agent - dishwasher model

Page 12 highlights

Rack Accessories Flip Tines (model dependent) The racks consist of tines that can be folded down depending on what you may need to load in the rack. To fold down, grasp the folding tine and release from notch. Push folding tine downward to desired position as shown in Figure 1. Adjustable Upper Rack (model dependent) Remove the empty upper rack by pulling it out of the dishwasher until it can be lifted upward as show in Figure 2. Pull the rack up and out until the rollers are completely free of the roller guides. Figure 1 Figure 2 Reinsert the rack with the other set of rollers on the roller guides as shown in Figure 3. Figure 3 Adding Detergent and Rinse Agent Detergent Use only detergent specifically designed for dishwashers. For best results, use fresh powdered dishwashing detergent. NOTICE To avoid dishwasher damage, do not use hand dishwashing products in your dishwasher. To avoid dishwasher damage, do not use too much detergent if your water is soft. Using too much detergent with soft water may cause etching in glassware. The dishwasher uses less water, therefore, less detergent is required. With soft water, 1 tablespoon (15ml) of detergent will clean most loads. The detergent dispenser cup has lines that measure detergent to 1 tablespoon (15ml) and 1.75 tablespoons (25ml). 3 tablespoons (45ml) of detergent will completely fill the detergent dispenser. Note: If you do not know the hardness of your water supply, use 15ml of detergent. Increase the amount if necessary to the least amount required to get your kitchenware clean. Use the measuring lines in the detergent dispenser cup as a guide to measure the amount of detergent recommended in Table 1. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

10
Figure 1
Figure 2
Figure 3
Rack Accessories
Flip Tines (model dependent)
The racks consist of tines that can be folded down depending on what you
may need to load in the rack. To fold down, grasp the folding tine and
release from notch. Push folding tine downward to desired position as
shown in
Figure 1
.
Adjustable Upper Rack (model dependent)
Remove the empty upper rack by pulling it out of the dishwasher until it can
be lifted upward as show in
Figure 2
. Pull the rack up and out until the roll-
ers are completely free of the roller guides.
Reinsert the rack with the other set of rollers on the roller guides as shown
in
Figure 3
.
Adding Detergent and Rinse Agent
Detergent
Use only detergent specifically designed for dishwashers. For best results, use fresh powdered dish-
washing detergent.
NOTICE
To avoid dishwasher damage, do not use hand dishwashing products in your dishwasher.
To avoid dishwasher damage, do not use too much detergent if your water is soft. Using too much
detergent with soft water may cause etching in glassware.
The dishwasher uses less water, therefore, less detergent is required. With soft water, 1 tablespoon
(15ml) of detergent will clean most loads. The detergent dispenser cup has lines that measure deter-
gent to 1 tablespoon (15ml) and 1.75 tablespoons (25ml). 3 tablespoons (45ml) of detergent will com-
pletely fill the detergent dispenser.
Note: If you do not know the hardness of your water supply, use 15ml of detergent. Increase the amount if
necessary to the least amount required to get your kitchenware clean.
Use the measuring lines in the detergent dispenser cup as a guide to measure the amount of detergent
recommended in
Table 1
.