Bosch SHE3AR55UC Instructions for Use - Page 17

Caution - installation

Page 17 highlights

To reinstall the top spray arm, place it back in position and return the locking nut to its install position. Turn the locking nut clockwise to secure. Return the top rack to the top rack roller guides. Remove the bottom spray arm by first removing the empty bottom rack from the dishwasher. Grasp and lift the spray arm as shown in Figure 9. Look for obstruction in the spray nozzles. If the spray nozzles need cleaning, flush them under running water. To reinstall the bottom spray arm, return the bottom spray arm to the installed position and press it until it snaps into place. Return the bottom rack to the installed position. Figure 9 Check and clean the filter system The filter system consists of a Large Object Trap, Fine Filter and a Micro Filter. The filter system is located on the inside of your dishwasher under the lower rack and is easily accessible. During normal use, the filter system is self-cleaning. You should occasionally inspect it for foreign objects and clean it when necessary. Fine Filter Large Object Trap Micro Filter CAUTION To avoid injury, do not reach into the large object trap with your fingers. Figure 10 The large object trap could contain sharp objects. To remove the Large Object Trap, remove the bottom rack. Grasp the assembly and turn it counterclockwise as shown in Figure 10. Lift the assembly out. Carefully examine the assembly. If you find debris in the Large Object Trap, turn it upside-down and gently tap it on a flat surface to dislodge and remove debris. Flush the Micro Filter clean by holding it under running water. To reinstall the filter system, return the fine filter to the installed position. Turn the locking nut clockwise until it is locked. The arrow on the ring handle and the arrow on the Fine Filter should point at each other. Clean the exterior door panel Colored doors: use only a soft cloth dampened with soapy water. Stainless steel doors: use a soft cloth with a non-abrasive cleaner (preferably a liquid spray) made for cleaning stainless steel. For the best results, apply the stainless steel cleaner to the cloth and then wipe the surface. Clean the door gasket Regularly clean the door gasket with a damp cloth to remove food particles and other debris. Also clean the door seal, located inside the dishwasher at the bottom of the door. Winterizing your unit If your dishwasher will be unused for an extended period of time in a location that experiences freezing temperatures (holiday home or through a vacation period), have your dishwasher winterized by an authorized professional service. Turn your household water supply to the dishwasher off when on extended vacation or when dishwasher will not be used for more than 1 month. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

15
Figure 9
Fine
Filter
Trap
Micro
Filter
Large Object
Figure 10
To reinstall the top spray arm, place it back in position and return the locking
nut to its install position. Turn the locking nut clockwise to secure. Return the
top rack to the top rack roller guides.
Remove the bottom spray arm by first removing the empty bottom rack from
the dishwasher. Grasp and lift the spray arm as shown in
Figure 9
. Look for
obstruction in the spray nozzles. If the spray nozzles need cleaning, flush them
under running water.
To reinstall the bottom spray arm, return the bottom spray arm to the installed
position and press it until it snaps into place. Return the bottom rack to the
installed position.
Check and clean the filter system
The filter system consists of a Large Object Trap, Fine Filter and a
Micro Filter.
The filter system is located on the inside of your dishwasher under the
lower rack and is easily accessible. During normal use, the filter system is
self-cleaning. You should occasionally inspect it for foreign objects and
clean it when necessary.
CAUTION
To avoid injury, do not reach into the large object trap with your fingers.
The large object trap could contain sharp objects.
To remove the Large Object Trap, remove the bottom rack. Grasp the assembly
and turn it counterclockwise as shown in
Figure 10
. Lift the assembly out.
Carefully examine the assembly. If you find debris in the Large Object Trap, turn
it upside-down and gently tap it on a flat surface to dislodge and remove
debris.
Flush the Micro Filter clean by holding it under running water.
To reinstall the filter system, return the fine filter to the installed position. Turn the locking nut clock-
wise until it is locked. The arrow on the ring handle and the arrow on the Fine Filter should point at
each other.
Clean the exterior door panel
Colored doors: use only a soft cloth dampened with soapy water.
Stainless steel doors: use a soft cloth with a non-abrasive cleaner (preferably a liquid spray) made for
cleaning stainless steel. For the best results, apply the stainless steel cleaner to the cloth and then
wipe the surface.
Clean the door gasket
Regularly clean the door gasket with a damp cloth to remove food particles and other debris. Also
clean the door seal, located inside the dishwasher at the bottom of the door.
Winterizing your unit
If your dishwasher will be unused for an extended period of time in a location that experiences freezing
temperatures (holiday home or through a vacation period), have your dishwasher winterized by an
authorized professional service. Turn your household water supply to the dishwasher off when on
extended vacation or when dishwasher will not be used for more than 1 month.