Bose Bluetooth Series 2 Owner's guide - Page 23

English Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11 Tab 6, 12 The mobile phone and the headset do not connect. What you hear on the headset is not clear. • Make sure both devices are turned on and Bluetooth® connectivity is enabled on the phone. • Turn the headset off, then on again. Make sure the mobile phone is within 33 feet (10 meters) of the headset. • Check the Bluetooth device list on your phone to be sure Bose BT2 is selected. - If it is selected, delete it from the list (refer to your phone instruction manual for details). - If it is no longer listed, repeat "Additional pairing" on page 13. • Simultaneously hold Call and Volume - for 5 seconds to reset the memory, and pair the headset to the phone again. • Turn the phone power off, then on again. • During a call, adjust the volume on your mobile phone or on the headset by pressing Volume + or - . • Check your mobile phone signal strength. • Make sure the mobile phone is within 33 feet (10 meters) of the headset. • Reposition the headset. Refer to "Fitting" on page 14. • Clean the wire mesh under the tip. See page 26. 23