Bose Lifestyle 48 Bose® link AL8 homewide wireless audio link - Owner - Page 8
English, Français, Español - no sound
View all Bose Lifestyle 48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English Español Français SETUP Figure 5 Connection to a Bose link amplifier, as an example For the receiver 1. Connect one end of the second Bose® link A cable to the jack labeled Bose® link OUTPUT on the receiver. 2. Connect the other end of the cable to the Bose link Input jack on the expansion room system, amplifier, or powered speaker (Figure 5). AC Power Status LED Bose link Output jack Receiver Bose® link OUTPUT LIFESTYLE® SA-3 amplifier Bose link A cable Bose link Input jack 3. Insert the small plug on the power pack cable into the AC Power jack on the receiver and plug the pack into a wall outlet. The Status LED lights to verify this power connection. Note: For information on the meaning of the different Status LED lights, refer to "Check the indicators and settings" on page 8. Instructions for non-Bose or older Bose products The Bose link AL8 Homewide Wireless Audio Link also works with some products that are not Bose link compatible. You can use non-Bose products in the following ways: • A tuner/receiver as a sound source connected to the transmitter or in an expansion room connected to the receiver • Powered speakers connected to the receiver You can use older Bose products as follows: • Powered speakers, a radio, or system with its own volume and on/off controls and linelevel female RCA input jacks connected to the receiver Any of the above products require the use of an RCA to DIN adapter cable for connecting to the transmitter, the receiver, or both. An adapter kit, which contains two of these cables, is available from Bose. Note: To order the adapter kit, contact Bose and request Part Number 285320-207. For Bose contact information, refer to the address sheet included in the carton. To use an adapter cable The RCA connectors are color coded, red for right and white for left. 1. Insert the adapter cable DIN connector into the Bose® link jack on the transmitter (INPUT) or receiver (OUTPUT) jack, as appropriate. 2. Insert the adapter cable RCA connectors into the Audio Out jack on the connection panel of the audio source or the Audio In jack on the expansion room product. Match left to left and right to right. 7