Bose VCS-10 Black Owners Guide
Bose VCS-10 Black Manual
 |
View all Bose VCS-10 Black manuals
Add to My Manuals
Save this manual to your list of manuals |
Bose VCS-10 Black manual content summary:
- Bose VCS-10 Black | Owners Guide - Page 1
Bose® Home Theater Speakers VCS-10® Center Speaker VCS-30® Series II Center/Surround Speaker System Owner's Guide October 26, 2201 AM257528_01_V.pdf - Bose VCS-10 Black | Owners Guide - Page 2
of Conformity We, the offerer, Bose Corporation, The Mountain Framingham, MA 01701-9168 USA acknowledge our sole responsibility, that the product, Kind of equipment: Loudspeakers Type designation: VCS-10®, VCS-30® II in accordance with EMC directive 89/336/EC and article 10(1) of the Directive, is - Bose VCS-10 Black | Owners Guide - Page 3
is interrupted 13 Reference 14 Troubleshooting 14 Customer service 14 Cleaning speakers 15 Warranty period 15 Technical information 15 For your records Serial numbers are located on the back of each speaker. Center speaker serial number Surround speaker serial numbers and Dealer name - Bose VCS-10 Black | Owners Guide - Page 4
for choosing Bose® home theater speakers. Both the VCS-10® center speaker and the VCS-30® Series II center/surround speaker system are speakers simple to mount on a wall. Please read and follow the instructions in this guide. They will help you set up and use your new home theater speakers - Bose VCS-10 Black | Owners Guide - Page 5
Figure 1 A. The VCS-10® speaker carton contents Center speaker Rubber feet Setting Up Owner's guide B. The VCS-30® Series II system carton contents Left surround speaker Right surround speaker Mounting brackets Rubber feet Center speaker Mounting hardware Owner's guide AM257528_01_V.pdf - Bose VCS-10 Black | Owners Guide - Page 6
Setting Up Place the center speaker The center speaker provides center channel surround sound performance while taking up very little VCS-10® speaker is not designed to be set on end in a vertical position, mounted on a wall, or to support the additional weight of items placed on top of the speaker - Bose VCS-10 Black | Owners Guide - Page 7
to mount them on the wall. If you use the supplied brackets, refer to the bracket instruction diagrams in the Appendix. Do not connect the speakers before reviewing those instructions. If you prefer, set the speakers on a table or shelf in a horizontal position. CAUTION: Do not install near any heat - Bose VCS-10 Black | Owners Guide - Page 8
center channel RCA-type output on the receiver to the RCA-type input on the amplifier. The speaker will then connect directly to the amplifier instead of to the receiver. Choosing speaker These wires correspond to the red (+) and black (-) terminals on the speaker and the receiver or amplifier. Note: - Bose VCS-10 Black | Owners Guide - Page 9
the plain wire to the black (-) terminal. • The center speaker connects to the CENTER SPEAKER outputs on the receiver. Some surround sound receivers have two sets of center channel speaker outputs. Use either set. • The left surround speaker connects to the LEFT SURROUND SPEAKER outputs. • The right - Bose VCS-10 Black | Owners Guide - Page 10
on. Figure 7 Completed connections Center speaker Receiver or amplifier Right Surround speaker OUTPUT To speakers FRONT SPEAKERS +Righ-t Left +- SURROUND CENTER SPEAKERS SPEAKER Right Left A A+ + B B- - +- Right +- Left Left Surround speaker 10 October 26, 2001 AM257528_01_V.pdf - Bose VCS-10 Black | Owners Guide - Page 11
a qualified professional installer. CAUTION: Do not hang items from the brackets or speakers. The brackets were designed to support the weight of the speakers only. Note: See the back pages of this guide for the mounting template and hardware information. Note: For vertical mounting, mount part - Bose VCS-10 Black | Owners Guide - Page 12
13 14 15 16 17 18 11 19 10 20 9 21 8 22 7 23 6 CENTER and SURROUND speakers so all of the speakers sound equally loud in your main listening area. Instructions for this process vary, depending on the receiver brand and model you are using. Follow your receiver owner's guide instructions - Bose VCS-10 Black | Owners Guide - Page 13
right surround speakers SMALL (VCS-30 Series II surround speakers) Follow the receiver owner's guide instructions for using the receiver test tone to verify your connections and to adjust the volume levels of the speakers. If the sound is interrupted The VCS-10 Center Speaker and VCS-30 Series - Bose VCS-10 Black | Owners Guide - Page 14
Reference Troubleshooting Problem What to do No sound • Check the volume control. • Make sure the receiver (or amplifier) is plugged in and turned on. • Check all connections (see page 10). • Make sure the receiver is not on Mute. • Make sure headphones are not connected to the receiver. Center - Bose VCS-10 Black | Owners Guide - Page 15
it to air dry. Then reconnect the speaker and play it. If you notice any problems with how the speaker functions, disconnect it again and contact Bose® customer service. Clean the outside of your VCS-10® or VCS-30® Series II speakers by wiping each speaker with a damp cloth. If necessary, use a mild - Bose VCS-10 Black | Owners Guide - Page 16
Drilling template 9/16" (13 mm) 1/8" (3 mm) 1/4" (6 mm) 2 23/64" (60 mm) 1 3/16" (30 mm) 1/4" (6 mm) Optional speaker cord pilot hole A C 16 B October 26, 2001 AM257528_01_V.pdf - Bose VCS-10 Black | Owners Guide - Page 17
1/8" 1/4" 1/8" (3 mm) (6 mm) (3 mm) Wood wall #10 x 1-1/2 in. (#10 x 40 mm) A Masonry wall #10 #10 x 1-1/2 in. (#10 x 40 mm) A Wallboard wall 1/2" - 9/16" 1/4" 1/2" - 9/16" (12-13 mm) (6 mm) (12-13 mm) #10-24 x 3 in. A (M5 x 75 mm) AM257528_01_V.pdf October 26, 2001 17 - Bose VCS-10 Black | Owners Guide - Page 18
©2001 Bose Corporation The Mountain Framingham, MA 01701-9168 USA 257528 AM Rev.01 JN10788
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
Bose
®
Home Theater Speakers
Owner’s Guide
October 26, 2201
AM257528_01_V.pdf
VCS-10
®
Center Speaker
VCS-30
®
Series II Center/Surround
Speaker System