Home » Bose Manuals » Speakers » Bose VCS-10 » Manual Viewer

Bose VCS-10 Owner's guide

Bose VCS-10 Manual

View all Bose VCS-10 manuals

Add to My Manuals
Save this manual to your list of manuals

Bose VCS-10 manual content summary:

Bose VCS-10 | Owner's guide - Page 1
Bose® Home Theater Speakers Owner's Guide Brugervejledning Bedienungsanleitung Guía del usuario Notice d'utilisation Manuale d'istruzioni Gebruiksaanwijzing Bruksanvisningen VCS-10® Center Speaker VCS-30® Series II Center/Surround Speaker System
Bose VCS-10 | Owner's guide - Page 2
2
Bose VCS-10 | Owner's guide - Page 3
4 Unpack the carton 4 Place the center speaker 6 Position your surround speakers 7 Connect the speakers 8 Choosing speaker cord 8 Be sure to use the cord properly 8 Make the connections 9 Check the connections 10 Mounting your speakers on a wall 11 Adjusting Your Surround Sound Settings 12
Bose VCS-10 | Owner's guide - Page 4
to one center speaker, the VCS-30 Series II system includes two surround speakers. They are designed for use at the rear of your room. Advanced design brackets included in this package make the surround speakers simple to mount on a wall. Please read and follow the instructions in this guide. They
Bose VCS-10 | Owner's guide - Page 5
English Figure 1 A. The VCS-10® speaker carton contents Center speaker Rubber feet Setting Up Owner's guide B. The VCS-30® Series II system carton contents Left surround speaker Right surround speaker Mounting brackets Rubber feet Center speaker Mounting hardware Owner's guide 5
Bose VCS-10 | Owner's guide - Page 6
English Setting Up Place the center speaker The center speaker provides center channel surround sound performance while taking up very VCS-10® speaker is not designed to be set on end in a vertical position, mounted on a wall, or to support the additional weight of items placed on top of the speaker
Bose VCS-10 | Owner's guide - Page 7
feet to the bottom of a surround speaker Brackets that come with these speakers allow you to mount them on the wall. If you use the supplied brackets, refer to the bracket instruction diagrams in the Appendix. Do not connect the speakers before reviewing those instructions. If you prefer, set the
Bose VCS-10 | Owner's guide - Page 8
components. Note: Before running speaker cord through a wall or under a floor, check your local building code requirements and safety regulations. You may want to contact an electrical installer for this information. If your receiver's center channel is not amplified, you must connect an amplifier to
Bose VCS-10 | Owner's guide - Page 9
the plain wire to the black (-) terminal. • The center speaker connects to the CENTER SPEAKER outputs on the receiver. Some surround sound receivers have two sets of center channel speaker outputs. Use either set. • The left surround speaker connects to the LEFT SURROUND SPEAKER outputs. • The right
Bose VCS-10 | Owner's guide - Page 10
English Setting Up Check the connections Make sure each connection is made positive to positive (+ to Figure 7 Completed connections Center speaker Receiver or amplifier Right Surround speaker OUTPUT To speakers FRONT SPEAKERS Right +- Left +- SURROUND CENTER SPEAKERS SPEAKER Right Left A
Bose VCS-10 | Owner's guide - Page 11
. CAUTION: Do not hang items from the brackets or speakers. The brackets were designed to support the weight of the speakers only. Note: See the back pages of this guide for the mounting template and hardware information. Note: For vertical mounting, mount part A with the hole for screw C at
Bose VCS-10 | Owner's guide - Page 12
front and center speakers will emit sound almost constantly, while the surround speakers guide instructions for more details on using the test tone. To balance the bass and treble Upholstered furniture, wall-to-wall carpets, or heavy drapes can mufﬂe treble (high notes), making your speaker system
Bose VCS-10 | Owner's guide - Page 13
(VCS-30 Series II surround speakers) Follow the receiver owner's guide instructions for using the receiver test tone to verify your connections and to adjust the volume levels of the speakers. If the sound is interrupted The VCS-10 Center Speaker and VCS-30 Series II Center/Surround Speaker System
Bose VCS-10 | Owner's guide - Page 14
Reference Troubleshooting Problem What to do No sound • Check the volume control. • Make sure the receiver (or ampliﬁer) is plugged in and turned on. • Check all connections (see page 10). • Make sure the receiver is not on Mute. • Make sure headphones are not connected to the receiver. Center
Bose VCS-10 | Owner's guide - Page 15
10-100 watts per channel; rated 4-8 ohms Enclosure Black molded polymer with a tuned port Size/Weight Center speaker: 3.25"H x 21.5"W x 6"D; 5.9 lb (8.2 cm x 54.6 cm x 15.2 cm; 2.7 kg) Each surround speaker: 4.17"H x 10.93"W x 4.98"D; 3.3 lb (14.6 cm x 28.0 cm x 16.5 cm; 1.49 kg) VCS-10 speakers
Bose VCS-10 | Owner's guide - Page 16
Gabarit de perçage Maschera di perforazione Boormal Borrmall 2 23/64" (60 mm) 1 3/16" (30 mm) 1/4" (6 mm) A C 16 Optional speaker cord pilot hole Ekstra bormulighed til højttalerkabel Bohrung für Lautsprecherkabel Orificio opcional para el cable de altavoz Trou de traversée facultatif pour le
Bose VCS-10 | Owner's guide - Page 17
Væg af træ Holzwand Pared de madera Cloison en bois Parete in legno Houten wand Vägg av trä #10 x 1-1/2 in. A (#10 x 40 mm) #10 #10 x 1-1/2 in. (#10 x 40 mm) Masonry wall Væg af beton eller mursten Wand aus Beton oder Stein Pared de ladrillos Mur de maçonnerie Parete in muratura Stenen muur
Bose VCS-10 | Owner's guide - Page 18
©2001 Bose Corporation The Mountain Framingham, MA 01701-9168 USA AM257528 Rev.02