Bowflex Xtreme 2 Assembly Manual

Bowflex Xtreme 2 Manual

Get Bowflex Xtreme 2 PDF manuals and user guides View all Bowflex Xtreme 2 manuals
Add to My Manuals
Save this manual to your list of manuals

Bowflex Xtreme 2 manual content summary:

  • Bowflex Xtreme 2 | Assembly Manual - Page 1
    Assembly Instructions 17496 Rev B (02/2007)
  • Bowflex Xtreme 2 | Assembly Manual - Page 2
    Get To Know Your Machine The BOWFLEX® Xtreme®2 Home Gym 26 27 U V 29 W Y 22 20 19 21 25 13 28 Z 5 32 24 36 16 18 7 17 11 34 1 FRONT 10 12 14 8 23 2 8 35 6 4
  • Bowflex Xtreme 2 | Assembly Manual - Page 3
    Parts and Assembly Tips 1 Parts List Item Qty. Description 1 1 STANDING PLATFORM 2 1 RIGHT FRAME RAIL 3 1 LEFT FRAME RAIL 4 1 REAR CROSS BAR 5 1 LOWER LAT TOWER 6 1 ROD BOX WITH POWER RODS® 7 1 SEAT SUPPORT RAIL 8 1 RIGHT SQUAT FRAME RAIL 9 1 LEFT SQUAT FRAME RAIL 10 1 RIGHT
  • Bowflex Xtreme 2 | Assembly Manual - Page 4
     Bowflex® Xtreme®2 Home Gym Assembly Hardware Item #: A Qty.: 4 Descr: 4.2mm X 12mm Shroud Screw Item #: B Qty.: 3 Descr: #10 X 1" Self Drilling Screw Item #:C Qty.: 2 Descr: 1/4" X 1/2" Socket Head Cap Bolt Item #: D Qty.: 4 Descr: 5/
  • Bowflex Xtreme 2 | Assembly Manual - Page 5
    that you use two people to assemble your Bowflex® Xtreme®2 home gym. Tools You Will Need You will need the following tools to complete the assembly of your Bowflex® Xtreme®2 home gym. If you don't have these tools, you can find them at any hardware or department store for a reasonable price
  • Bowflex Xtreme 2 | Assembly Manual - Page 6
     Assembly Guide Step 1: Assemble the Base Frame Assembly Locate the following items: Figure 1 • Item #1 - Standing Platform • Item #2 - Right - Rod Box with Power Rod® Unit • Item #B - (3) #10 X 1" Self Drilling Screws • Item #M - (3) 1/4" Washers Figure 2 5 Lay the Rod Box w/ Power Rod®
  • Bowflex Xtreme 2 | Assembly Manual - Page 7
    Step 3 at this time. Figure 3 F  Lower Lat Tower Assembly O 4 Base Frame Assembly Step 4: Attach the Seat Support Rail to the Base Frame Assembly Locate the following items: • From Step 3 - Base Frame (Main) Assembly • Item #7 - Seat Support Rail • Item #F - (2) 3/8" X 3/4" Hex Head Bolts • Item
  • Bowflex Xtreme 2 | Assembly Manual - Page 8
    Item #8) and Left Squat Frame Rail (Item #9) with the holes in the Seat Support Rail (Item #7) as shown in Figure 5. Place (1) 3/8" Washer (Item #O) over Assembly using (2) 3/8" X 3/4" Hex Head Bolts (Item #F) and (2) 3/8" Washers (Item #O). Repeat this process for the Left Squat Frame Foot Assembly
  • Bowflex Xtreme 2 | Assembly Manual - Page 9
    Right and Left Pulley Arms • From Step 5 - Main Assembly • Item #F - (4) 3/8" X 3/4" Hex Head Bolts • holes in the Pulley Arms are facing away from the Rod Pack. Place (2) 3/8" Washers (Item #O) over (2) and the Lower Lat Tower, and secure tightly, using (4) 1/2" Washers (Item #P) and (4) 1/2" Nylock
  • Bowflex Xtreme 2 | Assembly Manual - Page 10
    the Main Assembly, as shown in Figure 8. Place (4) M4 Washers (Item #L) over the ends of (4) 4.2mm X 12mm Self Drilling Screws (Item #A), and use these At this time, review and tighten all hardware installed in Steps 1-8. Figure 8 23 12 13 A L Step 9: Attach the Seat Pad to the Seat Backbone
  • Bowflex Xtreme 2 | Assembly Manual - Page 11
    Step 10 - Main Assembly • Item #E - (2) 5/16" X 2 1/2" Hex Head Bolts • Item #N - (2) 5/16" Washers Figure 11 24 The Seat Back Pad (Item #24) has two pair of holes on its back. Before attaching the Seat Back Pad to the Seat Support Rail (Item #7), assess which holes to use for your height. The
  • Bowflex Xtreme 2 | Assembly Manual - Page 12
    O 26 Step 13: Attach Rear Lat Cross Bar to Upper Lat Tower Locate the following items: • From Step 12 - Upper Lat Tower Assembly • Item #27 - Rear Lat Cross Bar • Item #J - (2) 1/2" X 5 1/4" Hex Head Bolts • Item #Q - (4) 1/2" Washers, Large OD • Item #S - (2) 1/2" Nylock Nuts Do not unwrap cables
  • Bowflex Xtreme 2 | Assembly Manual - Page 13
    Lat Tower all the way into the top of the Lower Lat Tower on the O Main Assembly. Align all bolt holes and secure by placing using (1) 3/8" Washer (Item #O) over (1) 3/8" X 3/4" Hex Head Bolt (Item #F) in the upper, back hole. Then place (2) 3/8" Washers over (2) 3/8" X 3/4" Hex Head Bolts
  • Bowflex Xtreme 2 | Assembly Manual - Page 14
    12 Step 16: Bowflex® Xtreme®2 Home Gym Pulleys The Figure below shows all Pulleys on the Bowflex® Xtreme®2 home gym. Subsequent images illustrate how to connect and route each of the Cables through the Pulleys. Connecting the Cables is much easier with a second person assisting
  • Bowflex Xtreme 2 | Assembly Manual - Page 15
    Figure 17- Lat Pulley Housing Towards the Front of the Machine NOTE: Pulleys shown are seperated for clarity. Pulleys do NOT come apart on your machine. 13 Lat Pulley Housing Washer Hex Head Bolt Towards the Rear of the Machine Grasp and hold Cables here Left Pulley Cable Right Pulley Cable
  • Bowflex Xtreme 2 | Assembly Manual - Page 16
    in the Lat Pulley Housing and Lat Pulleys, as shown in Figure 18. Tighten all hardware. NOTE: You will most likely need to push the Power Rod® Unit out of the way for this step. They are not pictured for the sake of clarity.
  • Bowflex Xtreme 2 | Assembly Manual - Page 17
    the (3) Floating Pulley, as shown in Figure 19. Lat Tower Pulleys Continue to guide that Cable up through the (4) Pulley on the Rear Lat Cross Bar, and from slipping back through the Pulleys, as shown in Figure 19b. Right Rod Cable NOTE: The Cable End Stop Ball Core should fit over the Ferrule
  • Bowflex Xtreme 2 | Assembly Manual - Page 18
    End Stop Ball with Core Cable End Stop Ball Ferrule Cable Core Step 19c - Cable & Pulley Routing Connect Rod Cables through Left (3) Floating and Lat Tower Pulleys Repeat with Left Rod Cables and (3) & (8) Floating Pulleys as shown in Figure 19c. NOTE: Once the Cable End Stop Balls are attached
  • Bowflex Xtreme 2 | Assembly Manual - Page 19
    through the Floating and Main Assembly Pulleys Slide the Right Squat Frame Pulley (6) to the furthest back hole, as indicated in Figure 20. Unwrap the Right Squat Cable from the (6) Pulley and guide the Cable under the Cable Shroud (with the Bowflex® Xtreme®2 Logos), threading under and through
  • Bowflex Xtreme 2 | Assembly Manual - Page 20
    Figure 20b - Left Main Assembly Pulleys Cable Shroud Left Squat Cable Step 20b - Cable & Pulley Routing Connect Left Squat Cable through the Floating and Main Assembly Pulleys Repeat the same procedure completed during Step 20 for the Left Squat Cable.
  • Bowflex Xtreme 2 | Assembly Manual - Page 21
    : You may adjust the Seat for your height once the Xtreme²™ has been fully assembled. Step 22: Install the Leg Extension Rollers Locate the following items: • Item #20 - (2) Chrome Roller Tubes • Item #21 - (4) Foam Rollers • Item #22 - (4) Foam Roller End Caps Insert the Chrome Roller Tubes (Item
  • Bowflex Xtreme 2 | Assembly Manual - Page 22
    Leg Extension, as shown in Figure 22. STOP: Inspect and Tighten all Hardware Carefully go over the entire Bowflex® Xtreme®2 home gym assembly, and tighten all bolts, nuts and other hardware before using your Bowflex® Xtreme®2 home gym. CONGRATULATIONS! You have successfully assembled your Bowflex
  • Bowflex Xtreme 2 | Assembly Manual - Page 23
    assembly manual. Should you find any inconsistencies, have questions about your Bowflex® Xtreme®2 home gym or have suggestions for improving our manuals, please call 800-628-8458 for assistance" © 2004, The Nautilus Group, Inc. 16400 SE Nautilus Drive, Vancouver, WA 98683. Nautilus®, Power Rod
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
Assembly Instructions
17496 Rev B (02/2007)