Brother International BAS-311E Programmer Instruction Manual - English
Brother International BAS-311E Manual
View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BAS-311E manual content summary:
- Brother International BAS-311E | Programmer Instruction Manual - English - Page 1
PROGRAMMER - Brother International BAS-311E | Programmer Instruction Manual - English - Page 2
the Brother Industrial Sewing Machine. Please read this "Programmer Instruction Manual" and the separate volume "Programmable Electronic Pattern Sewer Instruction Manual" carefully before using the machine. Operation of this industrial sewing machine is usually carried out in front of moving parts - Brother International BAS-311E | Programmer Instruction Manual - English - Page 3
power ON/OFF ...10 Turning power ON ...10 Turning power OFF ...11 Handling of floppy disk ...12 Protecting data in floppy disks ...13 Setting the pattern in parallel 2 74 Deleting a part of the program during programming 77 Moving a part of continuous program in parallel 78 Canceling thread - Brother International BAS-311E | Programmer Instruction Manual - English - Page 4
during programming 97 Checking the program setting and setting attribute 98 Editing the current data ...98 Deleting a part of data ...101 Setting low-speed sewing ...102 Inputting the trigger ...103 Creating a multiple stitch ...104 Displaying a pattern image 106 Checking the program setting - Brother International BAS-311E | Programmer Instruction Manual - English - Page 5
pattern in parallel 2 ...155 Deleting a part of the program during programming 157 Moving a part of continuous program in parallel 157 Canceling thread Creating split data ...177 Creating magnified data ...177 Low-speed sewing ...178 Setting the option output ...179 Ending programming ...179 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 6
output data 198 Writing the extended option output data 199 Deleting the extended option output data 200 Table of condition number 201 Machine operation mode ...201 Standard input ...201 Standard output ...202 Extended option external input ...202 Extended option output ...203 Table of extended - Brother International BAS-311E | Programmer Instruction Manual - English - Page 7
Contents 6 1SPHSBNNFS - Brother International BAS-311E | Programmer Instruction Manual - English - Page 8
Chapter 1 Preparations of operation - Brother International BAS-311E | Programmer Instruction Manual - English - Page 9
Chapter 1 Preparations of operation Connection Connection of the programmer cable to the machine is described here. Check that the machine power is OFF before connecting the cable. 1. Connect the cable to the connector on the left side of the operation panel. 8 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 10
Handling the programmer Chapter 1 Preparations of operation Display panel Displays messages during programming. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 11
Chapter 1 Preparations of operation Turning power ON/OFF Turning power ON 1. Switch ON the machine. 2. Press the foot switch pedal to lift the work clamp. Foot switch pedal 3. Set the pattern sheet. Fix the pattern sheet with adhesive tape on - Brother International BAS-311E | Programmer Instruction Manual - English - Page 12
to lift the work clamp. Foot switch pedal 4. Remove the pattern sheet. 5. Press the foot switch pedal to lower the work clamp. 6. Switch OFF the machine. Programmer 11 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 13
Chapter 1 Preparations of operation Handling of floppy disk Do not force open the shutter for direct contact with the magnetic area. Do not bring disks near magnetic matters such as magnetic screwdriver or the back side of the programmer. Do not store floppy disks in an extremely high or low - Brother International BAS-311E | Programmer Instruction Manual - English - Page 14
Chapter 1 Preparations of operation Protecting data in floppy disks Write-protection is available for a floppy disk to prevent undesired data deletion. A write-protected disk is read-only. It is recommended to provide write-protection for disks which contain important data. To do so, slide the write - Brother International BAS-311E | Programmer Instruction Manual - English - Page 15
manual consists of the following chapters. Chapter 1 Preparations of operation Describes the basic precautions. Chapter 2 Programming with Help Function Describes the procedure to create programs using icons. It is recommended for persons who are used to icon input. who use this machine - Brother International BAS-311E | Programmer Instruction Manual - English - Page 16
(2DD) 0.1mm/pulse 2 options: 400 and 1200 spm E Series(2HD) 0.05mm/pulse 4 options: 400, 600, 800, 1200 spm Commmands 668L 669L Split function in sewing No Stoppage of split with the needle No at the lower end Extended option output No Yes 220L 230L Yes 221L 231L Yes Programmer 15 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 17
Chapter 1 Preparations of operation 16 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 18
Chapter 2 Programming with Help Function - Brother International BAS-311E | Programmer Instruction Manual - English - Page 19
description and usage The following panel keys are used in Help mode. Press this key to start/end a program. Refer to "Turning power OFF" (Page 11). Press this key to return to the previous step or when a setting is canceled. Press this key to return to the corresponding submenu. This key - Brother International BAS-311E | Programmer Instruction Manual - English - Page 20
setting. (Refer to page 107.) Edits the program data. (Refer to page 111.) Displays the available keys. Carries out the preference setting of the programming machine. Reads/writes data in a floppy disk. (Refer to page 210.) Deletes the created/edited program data. Programmer 19 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 21
Chapter 2 Programming with Help Function Programming flowchart Programming Select and press . Position the sewing start position and press . Select an icon for programming. (Refer to page 83.) Combine straight lines, curves and other figures to make patterns on the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 22
Chapter 2 Programming with Help Function Editing program (Refer to page 111.) Select and press . Select an icon for editing. Press after editing. Checking and setting (Refer to page 107.) Select and press . Move to the needle position for setting. Press and carry out setting. Programmer 21 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 23
counterclockwise direction Carrying out zigzag stitch Carrying out zigzag stitch on the sewing path Carrying out zigzag stitch on the left side of the sewing path Carrying out zigzag stitch on the right side of the sewing path Ending programming Creating needle drop data Creating feed data Creating - Brother International BAS-311E | Programmer Instruction Manual - English - Page 24
symmetrically to the X axis Copying a pattern symmetrically to a point Copying a pattern symmetrically to a point Deleting a part of the program Setting low-speed sewing Inputting the trigger Starting a multiple stitch Displaying a pattern image Checking the program setting and setting attribute - Brother International BAS-311E | Programmer Instruction Manual - English - Page 25
Chapter 2 Programming with Help Function Editing data Moving a pattern in parallel Moving a pattern symmetrically to the Y axis Moving a pattern symmetrically to the X axis Moving a pattern symmetrically to a point Resizing a pattern Copying a resized pattern Rotating a pattern clockwise Copying a - Brother International BAS-311E | Programmer Instruction Manual - English - Page 26
Chapter 2 Programming with Help Function Programming example Frequently used programming method is explained here. Refer to "Programming" (page 83) for function and operation of each icon. Programming for each stitch Program each stitch according to the pattern. The example in the left is used for - Brother International BAS-311E | Programmer Instruction Manual - English - Page 27
Chapter 2 Programming with Help Function 7. When point C is programmed, press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 28
Magnified input Chapter 2 Programming with Help Function To program a detailed pattern for each stitch, use a magnified input. The example in the left is used for explanation of programming the pattern to the magnification of 5. Programming 1. Press P . 5IF XPSL DMBNQ NPWFT UP UIF IPNF - Brother International BAS-311E | Programmer Instruction Manual - English - Page 29
Chapter 2 Programming with Help Function Inputting the end code 1. Select with and press . 2. Select the end code type with and press . JTTFMFDUFEJOUIFFYBNQMF1SFTT BOEUIFXPSLDMBNQ SFUVSOTUPUIFGJSTUTUJUDI QPJOU" 3. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 30
Lines Chapter 2 Programming with Help Function The pattern with lines is programmed. The example in the left is used for explanation of programming. Programming 1. Press P . 5IF XPSL DMBNQ NPWFT UP UIF IPNF QPTJUJPO BOE UIF QSPHSBNNFSTDSFFOJTEJTQMBZFE 2. Select with and press . - Brother International BAS-311E | Programmer Instruction Manual - English - Page 31
Chapter 2 Programming with Help Function Inputting the end code 1. Select with and press . 2. Select the end code type with and press . JTTFMFDUFEJOUIFFYBNQMF1SFTT BOEUIFXPSLDMBNQ SFUVSOTUPUIFGJSTUTUJUDI QPJOU" 3. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 32
Curve Chapter 2 Programming with Help Function The pattern with curves is programmed. The example in the left is used for explanation of programming at the curve and the corner. #FTVSFUPQSFTT UXJDFGPSBTQMJUBUDPSOFSQPJOUT$PS&*GBTQMJUJTOPUNBEF UIFDPSOFSXJMMCFSPVOE When a - Brother International BAS-311E | Programmer Instruction Manual - English - Page 33
Chapter 2 Programming with Help Function 5. Input the stitch length and press . NNJTJOQVUJOUIFFYBNQMF *OQVUUPNBLFUIFTUJUDIMFOHUIUPNN 6. Move the work clamp with . Press when the needle point is at point B of the pattern. 7. Repeat step 6 and create the program to point - Brother International BAS-311E | Programmer Instruction Manual - English - Page 34
Saving 1. Select with and press . 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 35
is programmed to make two lines with a constant width. The example in the left is used for explanation of a double stitch to the left of sewing direction. When the line changes from straight to curve as in points B or E, be sure to press twice to make a split. More intermediate points such - Brother International BAS-311E | Programmer Instruction Manual - English - Page 36
the needle point is at point B of the pattern. 8. Program points C, D and E. 9. When point E is programmed, press again. 10. Program point F. 11. When point F is programmed, press again. 12. Press . The needle moves to points F, G and H. Chapter 2 Programming with Help Function 13. When the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 37
Chapter 2 Programming with Help Function Saving 1. Select with and press . 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 38
3. Move the work clamp with . Press when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 4. Program pattern 1. 5. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 39
Chapter 2 Programming with Help Function Saving 1. Select with and press . 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 40
3. Move the work clamp with . Press when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 4. Select with and press . 5. Move the work clamp with . Press when the needle point is at point B of the pattern. 6. Repeat step 5 and create the program to - Brother International BAS-311E | Programmer Instruction Manual - English - Page 41
Chapter 2 Programming with Help Function Inputting the end code 1. Select with and press . 2. Select the end code type with and press . "111" is selected in the example. Press and the work clamp returns to the first stitch(point A). 3. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 42
Symmetrical pattern Chapter 2 Programming with Help Function A pattern symmetric to the X axis or the Y axis is programmed. After programming the pattern, select the symmetrical pattern type to complete the pattern. The example in the left is used for explanation of programming symmetric to the Y - Brother International BAS-311E | Programmer Instruction Manual - English - Page 43
Chapter 2 Programming with Help Function 5. When point B is programmed, press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 44
Saving 1. Select with and press . 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 45
Chapter 2 Programming with Help Function Splitting Pattern 1 Different patterns, splitting each pattern in sequence, are programmed. The example in the left is used for explanation of 3 patterns in sequence. Pattern 2 Programming 1. Press P . The work clamp moves to the home position and the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 46
8. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 47
Chapter 2 Programming with Help Function 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 48
4. Select with and press . 5. Select with and press . Chapter 2 Programming with Help Function 6. Input the zigzag width and the stitch length and press . 3.0 mm is input in the example. Input 030 to make the width and the stitch length to 3.0 mm. To switch input between the stitch length and - Brother International BAS-311E | Programmer Instruction Manual - English - Page 49
Chapter 2 Programming with Help Function Saving 1. Select with and press . 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 50
Chapter 2 Programming with Help Function Creating a stitch pattern 1. Create a pattern in consideration of the most inside and outside lines for a multiple stitch. The two lines should be spaced uniformly. 2. Connect each direction change point on the inside line with the matched direction change - Brother International BAS-311E | Programmer Instruction Manual - English - Page 51
Chapter 2 Programming with Help Function 2. Select with and press . 3. Move the work clamp with . Press when the needle point is at point q of the pattern. The first stitch (point q) is programmed. 4. Select with and press . 5. Input the stitch length and the number of lines for a - Brother International BAS-311E | Programmer Instruction Manual - English - Page 52
the outside line respectively. If there are any points or splits not paired, the needle point automatically returns to the previous point. Correct the program. 11. Press . 12. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 53
Chapter 2 Programming with Help Function Example of modified program This section describes the modification method of the program using examples. Refer to "Programming" (page 83) or "Checking the program setting and setting attribute" (page 107) for function and operation of each icon. Resizing - Brother International BAS-311E | Programmer Instruction Manual - English - Page 54
2. Select with and press . 3. Select with and press . 4. Input the data number and press . 5. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 55
Chapter 2 Programming with Help Function Saving 1. Select with and press . 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 56
2. Select with and press . 3. Select with and press . 4. Input the data number and press . 5. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 57
Chapter 2 Programming with Help Function 3. Repeat step 2 and program 6' and 7'. 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 58
Saving 1. Select with and press . Chapter 2 Programming with Help Function 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 59
Chapter 2 Programming with Help Function 3. Select with and press . 4. Input the data number and press . 5. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 60
Saving 1. Select with and press . Chapter 2 Programming with Help Function 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 61
Chapter 2 Programming with Help Function 3. Select with and press . 4. Input the data number and press . 5. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 62
3. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 63
before the first stitch A point is added before the current sewing point to change the sewing start position. The example in the left is used for explanation of changing the sewing start position from 1 to 1'. Calling data 1. Press P . The work clamp moves to the home position. The programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 64
Programming a new point 1. Select with and press . 2. Move the work clamp with the needle point is at 1'. Record the coordinates (values of X and Y). so that 3. Press . 1' is programmed. 4. Move the work clamp with to the opposite position of coordinates recorded in step 2 so that the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 65
Chapter 2 Programming with Help Function 6. The needle point moves to 1'. 7. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 66
Chapter 2 Programming with Help Function Adding escape point before the first stitch An escape point is added before the sewing start position. The example in the left is used for explanation of setting escape point A. The escape point is a provisional point provided for prevention of - Brother International BAS-311E | Programmer Instruction Manual - English - Page 67
Chapter 2 Programming with Help Function Programming a new point 1. Select with and press . 2. Move the work clamp with so that the needle point is at A of the pattern. Record the coordinates (values of X and Y). 3. Press . A is programmed. 4. Move the work clamp with to the opposite - Brother International BAS-311E | Programmer Instruction Manual - English - Page 68
6. The needle point moves to A. Chapter 2 Programming with Help Function 7. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 69
Chapter 2 Programming with Help Function Moving the escape point The position of the escape point is moved. The example in the left is used for explanation of moving the escape point from A to B. Calling data 1. Press P . The work clamp moves to the home position. The programmer screen is - Brother International BAS-311E | Programmer Instruction Manual - English - Page 70
Programming a new point. 1. Select with and press . 2. Move the work clamp with when the needle point is at B. B is programmed. . Press 3. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 71
Chapter 2 Programming with Help Function Saving 1. Select with and press . 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 72
3. Select with and press . Chapter 2 Programming with Help Function 4. Input the data number and press . 5. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 73
Chapter 2 Programming with Help Function Saving 1. Select with and press . 2. Select with and press . 3. Input the data number and press . 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 74
3. Select with and press . Chapter 2 Programming with Help Function 4. Input the data number and press . 5. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 75
Chapter 2 Programming with Help Function Ending program 1. Press P . Moving the pattern in parallel 2 The program data is moved in parallel. The example in the left is used for explanation of moving the pattern in parallel when the first stitch is the escape point. Calling data 1. Press P . The - Brother International BAS-311E | Programmer Instruction Manual - English - Page 76
2. Press 2 and press . The work clamp moves to point A. 3. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 77
Chapter 2 Programming with Help Function 15. Turn the pulley with a hand and move the needle to the top point. 16. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 78
Chapter 2 Programming with Help Function Deleting a part of the program during programming A program can be modified during programming. The example in the left is used for explanation of deleting 2 stitches at 8 and creating a new program. 1. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 79
Chapter 2 Programming with Help Function Moving a part of continuous program in parallel A part of continuous program is moved in parallel. The example in the left is used for explanation of Feed moving patterns B an C in parallel. Pattern A Pattern B - Brother International BAS-311E | Programmer Instruction Manual - English - Page 80
3. When the needle point reaches 1, press . The work clamp stops. If the work clamp passes, input a few stitches and press . The needle returns for a few stitches of the input. 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 81
Chapter 2 Programming with Help Function Ending program 1. Press P . Canceling thread breakage at the last stitch Stitch length Addition of feed after the last point can cancel thread breakage at the last stitch. When "115" is input for the end code, the thread breakage does not occur. In this - Brother International BAS-311E | Programmer Instruction Manual - English - Page 82
6. Select with and press . Chapter 2 Programming with Help Function 7. Move the work clamp with . Press when the needle point is at given point C. 8. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 83
Chapter 2 Programming with Help Function 4. Press . ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 84
Programming Creating a line 1. Select and press . Chapter 2 Programming with Help Function 2. Input the stitch length and press . Stitch length 3. Move the needle with and press . Remaining plot count Distance from the previous point in the direction of X or Y axis Creating a curve Increase the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 85
with Stitch length and press . Remaining plot count Distance from the previous point in the direction of X or Y axis 4. Press twice at the sewing end position. Check that both values are 0.00 mm. Creating a circle The following five options are available for creating a circle. Creating a circle - Brother International BAS-311E | Programmer Instruction Manual - English - Page 86
the stitch length and the overlap stitch count, then press . Values of 0 - 9 are available for input. Stitch length Stitch count for overlap sewing Presss for selection. 2. Move the needle with to select the second point, then press . Remaining plot count Distance from the previous point in the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 87
the stitch length and the overlap stitch count, then press . Values of 0 - 9 are available for input. Stitch length Stitch count for overlap sewing 2. Move the needle with Press for selection. and press . Remaining plot count Distance from the previous point in the direction of X or Y axis - Brother International BAS-311E | Programmer Instruction Manual - English - Page 88
Chapter 2 Programming with Help Function 4. Select the third point and press . Creating a semicircle The following two options are available for creating a semicircle. Creating a semicircle of the specified diameter in the clockwise direction Creating a semicircle of the specified diameter in the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 89
length and the overlap stitch count, then press . Values of 0 - 9 are available for input. Zigzag width Zigzag pitch Stitch count for overlap sewing 2. Move the neelde with Press for selection. to select the second point and press . Remaining plot count Distance from the previous point in the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 90
length and the overlap stitch count, then press . Values of 0 - 9 are available for input. Zigzag width Zigzag pitch Stitch count for overlap sewing 2. Move the neelde with Press for selection. to select the second point and press . Remaining plot count Distance from the previous point in the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 91
neelde with Press for selection. , then press . Remaining plot count Distance from the previous point in the direction of X or Y axis 5. Press twice at the sewing end position. Check that both values are 0.00 mm. 90 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 92
, input an end code. The following six end codes are available. 111 Normal end 112 Fixing the sewing speed at 1000 spm or lower 113 No carrying out thread removal 114 Setting the sewing speed at 1000 spm or lower without thread removal 115 Carrying out no thread breakage 116 Fixing the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 93
Chapter 2 Programming with Help Function Creating needle drop data Create needle drop data for the current needle position. 1. Select and press . 2. Move the needle with , then press . Remaining plot count Distance from the previous point in the direction of X or Y axis Creating feed data Create - Brother International BAS-311E | Programmer Instruction Manual - English - Page 94
with , then press . Remaining plot count Distance from the previous point in the direction of X or Y axis Creating split data Specify breakpoints for sewing a series of different patterns. 1. Select and press . 2. Use to specify whether to stop the needle at the lower end or not, then press - Brother International BAS-311E | Programmer Instruction Manual - English - Page 95
Chapter 2 Programming with Help Function Creating magnified data Input small patterns in magnified sizes. Three magnification scales of x2, x5 and x10 are available. Prepare pattern sheets suitable for the magnified patterns. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 96
Creating double stitch data in the same direction to the right side of the sewing path Offsetting double stitch data to the left side of the sewing path Offsetting double stitch data to the right side of the sewing path If sharp angles or fine curves are included in the pattern sheet, the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 97
Chapter 2 Programming with Help Function 5. Press at the sewing end position. An alarm souds after is pressed twice. After the alarm, press again. Then an alarm sounds and the double stitch pattern is calculated. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 98
Chapter 2 Programming with Help Function Displaying the data image during programming A data image is displayed during programming. 1. Select and press . The pattern image is displayed. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 99
the needle positions after the current position in parallel by feeding Moving data of the needle positions after the current position in parallel by sewing with the specified pitch Moving data of the needle positions after the current position in parallel Copying repeatedly the previous data on the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 100
If is selected 1. Adjust the destination with Chapter 2 Programming with Help Function , then press . If is selected 1. Input the stitch length, then press . 2. Adjust the destination with Stitch length , then press . Distance from the previous point in the direction of X or Y axis If is - Brother International BAS-311E | Programmer Instruction Manual - English - Page 101
Chpater 2 Programming with Help Function If , , , or is selected Data chunks separated with feed data are copied. If the number of ignored boundary feeds is 0: " # $ $ Data unit C is copied. If the number of ignored boundary feeds is 1 Data units B and C are copied. If the number of ignored - Brother International BAS-311E | Programmer Instruction Manual - English - Page 102
Chapter 2 Programming with Help Function Deleting a part of data Adjust the needle position before deletion. 3FGFSUP$IFDLJOHUIFQSPHSBNTFUUJOHBOETFUUJOHBUUSJCVUF QBHF GPSBEKVTUNFOU 1. Select and press . 2. Input the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 103
speed is set at 600 spm or lower. 4 (Low-speed 4) The maximum sewing speed is set at 400 spm or lower. 1. Select and press . 2. Select an option of low-speed sewing with . 3. Input the stitch count for sewing with the reduced maximum speed. Input the desired stitch count. 4. Press . Low-speed - Brother International BAS-311E | Programmer Instruction Manual - English - Page 104
and setting attribute" (page 107). 1. Select and press . 2. Input the option output number. 3. Move with or not. , then use to specify whether to stop the machine ON: The needle stops at the upper end without thread breakage, and restarts after output of the extended option. OFF - Brother International BAS-311E | Programmer Instruction Manual - English - Page 105
Chapter 2 Programming with Help Function Creating a multiple stitch 1. Select and press . 2. Input the stitch length and the number of lines for a multiple stitch. Press . 3. Move the needle point with and press . When the embroidering direction should be changed, provide a split by pressing - Brother International BAS-311E | Programmer Instruction Manual - English - Page 106
Chapter 2 Programming with Help Function Modifying the program of a multiple stitch When modifying the stitch length or the number of lines for a multiple stitch, the previously created curve program can be used. The previously created programs are required for modifying programs of multiple stitch - Brother International BAS-311E | Programmer Instruction Manual - English - Page 107
Chapter 2 Programming with Help Function Displaying a pattern image A data image is displayed during programming or editing. 1. Select and press . The pattern image is displayed. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 108
Stitch data type and availability of the option output, low-speed sewing(*) Displayed at points where stitch is set. Feed data type and is set. Extended option output no. of the trigger data and with/without machine stoppage (*) Displayed at points where trigger is set. Attribute of items marked - Brother International BAS-311E | Programmer Instruction Manual - English - Page 109
to the destination. 2. Press F , then press to move forward and to move backward. The needle skips sewing according to the input stitch count. Input "999" to skip sewing to the sewing end position or to a breakpoint. Setting the attribute (stitch data) 1. Move to the desired needle position and - Brother International BAS-311E | Programmer Instruction Manual - English - Page 110
2. Set the attribute. Option output Press to mark with O. Chapter 2 Programming with Help Function Slow conversion Press for type selection. 3. Press after setting. The screen returns to the confirmation screen. Press for selection. Setting the attribute (feed data) 1. Move to the desired - Brother International BAS-311E | Programmer Instruction Manual - English - Page 111
the desired needle position and press . The attribute setting screen appears. 2. Set the attribute. Extended option output trigger Press or 0 - 9 to select the number. Machine stop Press to select ON/OFF. 3. Press after setting. The screen returns to the confirmation screen. 110 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 112
program Edit the retrieved or created data. The following options are available as editing functions. Moving a pattern in parallel. (Changes the sewing start position.) Moving a pattern symmetrically to the Y axis Moving a pattern symmetrically to the X axis Moving a pattern symmetrically to a point - Brother International BAS-311E | Programmer Instruction Manual - English - Page 113
Chapte 2 Programming with Help Function If , or is selected 1. Press . The pattern is moved symmetrically to the sewing start position. If is selected 1. Input resizing scale in the X and Y directions. Switch between X and Y directions with . Resizing scale between 0 and 400% are available. 2. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 114
Chapter 2 Programming with Help Function If is selected Data chunks separated with feed data are resized and copied. If the number of feed boundaries to be ignored is 0: " # $ " Only A is copied. A' becomes a split program. If the number of feed boundaries to be ignored is 1 A and B are copied. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 115
Chapte 2 Programming with Help Function 3. Input the number of the feed boundaries to be ignored and press . Inputting 99 ignores all boundaries. 4. Use to change the reference position for resizing. If no reference position is specified, the home position is used as the reference. Resizing - Brother International BAS-311E | Programmer Instruction Manual - English - Page 116
Chapter 2 Programming with Help Function If or is selected 1. Input the angle of rotation and number of feed boundaries to be ignored, then press . Inputting 99 ignores all boundaries. Refer to "If is selected" (page 113.) 2. Adjust the reference position with and press . Angle The number of feed - Brother International BAS-311E | Programmer Instruction Manual - English - Page 117
Chapte 2 Programming with Help Function Deleting data Delete the current program data. 1. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 118
Chapter 3 Programming with Command Function - Brother International BAS-311E | Programmer Instruction Manual - English - Page 119
programming with command. Panel description and usage Cancels an image display. Lights when the feed is set. Press this key for smoothing or editing. Deletes a part of the data. Press this key to create a line or a circle - Brother International BAS-311E | Programmer Instruction Manual - English - Page 120
position. Displays the end code, if applicable. Displays the stitch length. Displays the input value. Programming flowchart Programming Position the sewing start position and press L . Input the command for programming. (Refer to page 161.) Combine straight lines, curves and other figures - Brother International BAS-311E | Programmer Instruction Manual - English - Page 121
Chapter 3 Programming with Command Function Editing Move to the home position or the needle position for editing. Input command for editing. (Refer to page 180.) Checking and setting Move to the needle position for editing. Input command and carry out setting. 120 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 122
data before stitches stitches Ending programming 1 1 1E 1 1 2E 1 1 3E 1 1 4E 1 1 5E 1 1 6E Normal end Fixing the sewing speed at 1000 spm or lower. Not carrying out thread removal. Setting the sewing speed at 1000 spm or lower without thread removal. Carrying out no thread breakage. Fixing the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 123
Chapter 3 Programming with Command Function Creating program LI 20 LI 21 LI 22 LI 23 LI 24 LI 3 0 0 LI 3 1 0 LI 3 2 0 LI M 2 M 3 M 4 M 5 0 9 L to Creating a double stitch in the reverse direction to the sewing path. Input the width of double stitch in . Creating an parallel - Brother International BAS-311E | Programmer Instruction Manual - English - Page 124
path Carrying out double stitch on the left side to the sewing path Carrying out parallel stitch on the left side to the sewing path Carrying out offset on the left side to the sewing path Specify split points (for sewing different patterns separately in a sequence) after feed Moving in parallel for - Brother International BAS-311E | Programmer Instruction Manual - English - Page 125
lower end (only when the needle position is at split) The maximum sewing speed becomes 400 spm or lower. The maximum sewing speed becomes 1200 spm or lower. The maximum sewing speed becomes 800 spm or lower. The maximum sewing speed becomes 600 spm or lower. Cancels low speed data setting Turns on - Brother International BAS-311E | Programmer Instruction Manual - English - Page 126
Chaprter 3 Programming with Command Function Programming example Frequently used programming method is explained here. Refer to "Programming" (page 161) for function and operation of each icon. Programming for each stitch Program each stitch according to the pattern. The example in the left is used - Brother International BAS-311E | Programmer Instruction Manual - English - Page 127
Chapter 3 Programming with Command Function Ending program 1. Press P . Resizing input Resizing input is used to program a detailed pattern stitch by stitch. The example in the left is used for explanation of programming the pattern to the magnification of 5. Programming 1. Press P . The work - Brother International BAS-311E | Programmer Instruction Manual - English - Page 128
Ending program 1. Press P . Lines Chaprter 3 Programming with Command Function The pattern with lines is programmed. The example in the left is used for explanation of programming. Programming 1. Press P . The work clamp moves to the home position and the programmer screen is displayed. 2. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 129
Chapter 3 Programming with Command Function Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . Curve A pattern with curves is programmed. Be sure to press 7 8 9 L for a split at corner - Brother International BAS-311E | Programmer Instruction Manual - English - Page 130
3. Input the stitch length and press M . 3.0 mm is input in the example. Input 030 to make the stitch length to 3.0 mm. 4. Move the work clamp with . Press L when the needle point is at point B of the pattern. Chaprter 3 Programming with Command Function 5. Move the work clamp with . Press 7 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 131
is programmed to make two lines with a constant width. The example in the left is used for explanation of a double stitch to the left of sewing direction. When the line changes from straight to curve or curve to straight as in points B or E, be sure to press 7 8 9 L to make a split. More - Brother International BAS-311E | Programmer Instruction Manual - English - Page 132
/write switch for writing into the floppy disk. Ending program 1. Press P . Feed Pattern 1 Pattern 2 After thread breaking, a feed is set for continuous sewing with the work clamp in position. The example in the left is used for explanation of programming pattern 2 with a feed after pattern - Brother International BAS-311E | Programmer Instruction Manual - English - Page 133
Chapter 3 Programming with Command Function 3. Program pattern 1. 4. Input point B and press F . 5. Move the work clamp with . Press L when the needle point is at point C of the pattern. 6. Program pattern 2. Inputting the end code 1. Press L at the last stitch and press . 1 1 1 E The work - Brother International BAS-311E | Programmer Instruction Manual - English - Page 134
Basting Chaprter 3 Programming with Command Function Basting is programmed. The example in the left is used for explanation of basting programming from point C to point F. Programming 1. Press P . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work - Brother International BAS-311E | Programmer Instruction Manual - English - Page 135
Chapter 3 Programming with Command Function Inputting the end code 1. Press L at the last stitch and press . 1 1 1 E The work clamp returns to the start position. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 136
Programming 1. Press P . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work clamp with . Press L when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 3. Create the program to point B. 4. Input point B - Brother International BAS-311E | Programmer Instruction Manual - English - Page 137
Chapter 3 Programming with Command Function Splitting Pattern 1 Different patterns, splitting each pattern in sequence, are programmed. The example in the left is used for explanation of 3 patterns in sequence. Pattern 2 Programming 1. Press P . The work clamp moves to the home position and the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 138
with Command Function Zigzag stitch is programmed. The example in the left is used for explanation of even width of zigzag stitch on the sewing path. Zigzag with curves may be programmed. Programming 1. Press P . The work clamp moves to the home position and the programmer screen is displayed - Brother International BAS-311E | Programmer Instruction Manual - English - Page 139
Chapter 3 Programming with Command Function Inputting the end code 1. Press 1 1 1 E . The work clamp returns to the start position. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . - Brother International BAS-311E | Programmer Instruction Manual - English - Page 140
2. Connect each direction change point on the inside line with the matched direction change point on the outside line using a line. 3. Provide one point (or more points) between the above two direction change points, and connect them using a line. Follow the procedure for curve points specification. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 141
should be "5", input "505". 10. Input the stitch length. Press M . "3.0 mm" is input in the example. Input "030" to make the stitch length to 3.0 mm. 11. Press L . If the number of lines for a multiple stitch has not been input, a buzzer sounds. Repeat step 9. 140 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 142
Inputting the end code 1. Press 1 1 1 E . The work clamp returns to the start position. Chaprter 3 Programming with Command Function Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . - Brother International BAS-311E | Programmer Instruction Manual - English - Page 143
Chapter 3 Programming with Command Function Example of modified program This section describes the modification method of the program using examples. Refer to "Programming" (page 161) . Resizing pattern The programmed pattern is resized. The example in the left is used for explanation. The center - Brother International BAS-311E | Programmer Instruction Manual - English - Page 144
Resizing 1. Move the needle to the reference point of resizing with . The pattern is resized to the home position if the needle is not moved. 2. Press 8 8 8 and press M . Input the resizing command. Chaprter 3 Programming with Command Function 3. Press 1 5 0 and press F . Input the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 145
Chapter 3 Programming with Command Function Changing partially A part of the programmed pattern is changed. The example in the left is used for explanation of creating 5', 6' and 7'. Calling data 1. Specify the program number on - Brother International BAS-311E | Programmer Instruction Manual - English - Page 146
The first stitch of the programmed pattern is deleted. The example in the left is used for explanation of deleting 1 and setting 2 for the sewing start position. Calling data 1. Specify the program number on the operation panel and press the read/write switch to read the data. Programmer 145 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 147
Chapter 3 Programming with Command Function Moving to position 1. 1. Press 1 and press . The work clamp moves to the start position. Deleting 1 1. Press C . 2. Input the number of stitches to be deleted and press . The example is deleting 1 stitch ahead. Press 1 . 3. The needle point moves to 2. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 148
Chaprter 3 Programming with Command Function Changing the first stitch position The position of the sewing start position is changed. The example in the left is used for explanation of moving the sewing start position from 1 to 1'. Calling data 1. Specify the program number on the operation panel - Brother International BAS-311E | Programmer Instruction Manual - English - Page 149
panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . Adding sewing point before the first stitch A point is added before the current sewing point to change the sewing start position. The example in the left is used for explanation of changing the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 150
Programming a new point. 1. Press F . 2. Move the work clamp with so that the needle point is at 1' of the pattern. Record the coordinates (values of and ). Chaprter 3 Programming with Command Function 3. Press L . 1' is programmed. 4. Move the work clamp with to the opposite position of - Brother International BAS-311E | Programmer Instruction Manual - English - Page 151
Chapter 3 Programming with Command Function Adding escape point before the first stitch An escape point is added before the sewing start position. The example in the left is used for explanation of setting escape point A. The escape point is a provisional point provided for prevention of - Brother International BAS-311E | Programmer Instruction Manual - English - Page 152
Deleting 1 1. Press 2 and press . The needle point moves to the first stitch, point A and the first stitch. 2. Press C . 3. Input the number of stitches to be deleted and press . The example is deleting 1 stitch. Press 1 . 4. The needle point moves to A. Chaprter 3 Programming with Command - Brother International BAS-311E | Programmer Instruction Manual - English - Page 153
Chapter 3 Programming with Command Function Moving the escape point The position of the escape point is moved. The example in the left is used for explanation of moving the escape point from A to B. Calling data 1. Specify the program number on the operation panel and press the read/write switch - Brother International BAS-311E | Programmer Instruction Manual - English - Page 154
4. The needle point moves to B. Chaprter 3 Programming with Command Function Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . Deleting the escape point The escape point is deleted. The - Brother International BAS-311E | Programmer Instruction Manual - English - Page 155
is moved in parallel. The example in the left is used for explanation of moving the pattern in parallel when the first stitch is the sewing start position. Calling data 1. Specify the program number on the operation panel and press the read/write switch to read the data. 154 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 156
Moving in parallel 1. Move the work clamp with . Press L when the needle point is at A of the pattern. Chaprter 3 Programming with Command Function Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending - Brother International BAS-311E | Programmer Instruction Manual - English - Page 157
Chapter 3 Programming with Command Function 2. Move the work clamp with so that the needle point is at B of the pattern. Record the coordinates (values of and ). If the moving distance is long, press F before movement. 3. Press R . The work clamp moves to the home position. 4. Press 1 and - Brother International BAS-311E | Programmer Instruction Manual - English - Page 158
be deleted and press . The example is deleting 2 stitches backward. Press 2 . 3. The needle point moves to 6. 4. Continue programming. Moving a part of continuous program in parallel A part of continuous program is moved in parallel. The example in the left is used for explanation of Feed moving - Brother International BAS-311E | Programmer Instruction Manual - English - Page 159
Chapter 3 Programming with Command Function Moving to position 1 1. Press 9 9 9 and press . The work clamp moves from the start point by each stitch. 2. Press when the needle is at 1. The work clamp stops. If the work clamp passes, input a few stitches and press . The needle returns for a few - Brother International BAS-311E | Programmer Instruction Manual - English - Page 160
Chaprter 3 Programming with Command Function Canceling thread breakage at the last stitch Stitch length Addition of feed after the last point can cancel thread breakage at the last stitch. When "115" is input for the end code, the thread breakage does not occur. In this case, every thread - Brother International BAS-311E | Programmer Instruction Manual - English - Page 161
Chapter 3 Programming with Command Function Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . 160 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 162
Function Creating a line Command to be used LI Input the stitch length in . Example Pitch 0.5 mm 12.0 mm Input 005 120 1. Select the sewing start position with and press L . 2. Input the stitch length in 3 digits and press LI . 3. Move the needle with and press L . Programmer 161 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 163
Chapter 3 Programming with Command Function Creating a curve Command to be used M Input the stitch length in . 789L Example Pitch 0.5mm 12.0mm Input 005 120 This command represents completing creation of a curve. Increase the number of plotting points to create a smoother curve. One to 99 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 164
7 0 0M 1 8 0M Input this command to create a zigzag circle. Input the zigzag stitch length in . Example: Pitch 0.5mm 12.0mm Input 005 120 1. Select the sewing start position with and press L . 2. Input 2 0 LI . 3. Input the stitch length in 3 digits and press LI . Programmer 163 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 165
Chapter 3 Programming with Command Function Creating a zigzag circle (go to 6 when not creating a zigzag circle) 4. Input 7 M (width). 5. Input the zigzag stitch length in 3 digits and press M . 6. Move the needle with to select the second point and press L . 7. Move the needle with to - Brother International BAS-311E | Programmer Instruction Manual - English - Page 166
a circle (zigzag circle) by specifying the diameter Command to be used 21 LI 22 LI 7 M M Creating a circle clockwise. Input the a circle (zigzag circle) by specifying 3 points" (Refer to page 163.) 1. Select the sewing start position with and press L . 2. Input 2 1 LI or 2 2 LI . 3. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 167
.) Input this command to create a zigzag circle. Input the zigzag stitch length in . "Creating a circle (zigzag circle) specifying 3 points" (Refer to page 163.) 1. Select the sewing start position with and press L . 166 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 168
Chapter 3 Programming with Command Function 2. Input 2 3 LI or 2 4 LI . 3. Input the stitch length in 3 digits and press LI . Creating a zigzag circle (go to 6 when not creating a zigzag circle) 4. Input 7 M (width). 5. Input the zigzag stitch length in 3 digits and press M . 6. Move the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 169
Chapter 3 Programming with Command Function Creating an arc Command to be used 3 0 0 LI Creating an arc passing 3 points. 1. Select the sewing start position with and press L . 2. Input 3 0 0 LI . 3. Input the stitch length in 3 digits and press LI . 4. Move the needle with to select the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 170
Chapter 3 Programming with Command Function Creating a semicircle Command to be used 3 1 0 LI 3 2 0 LI Creating a semicircle clockwise. Creating a semicircle counterclockwise. 1. Select the start point with and press L . 2. Input 3 1 0 LI or 3 2 0 LI . 3. Input the stitch length in 3 digits - Brother International BAS-311E | Programmer Instruction Manual - English - Page 171
page 163.) Carrying out zigzag stitch symmetrically to the sewing path. Carrying out zigzag stitch on the left side to the sewing path. Carrying out zigzag stitch on the right side to the sewing path. 1. Select the sewing start position with and press L . 2. Input 7 M (width). 3. Input the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 172
Chapter 3 Programming with Command Function Creating a multiple stitch Commands to be used 5 0 0M 5 M M 789L Input the start point for a multiple stitch. Input the number of lines for a multiple stitch ranging from 2 to 99 in . Ex.) The number of lines for a multiple stitch 5 lines Input - Brother International BAS-311E | Programmer Instruction Manual - English - Page 173
Chapter 3 Programming with Command Function Modifying the program of a multiple stitch When modifying the stitch length or the number of lines for a multiple stitch, the previously created curve program can be used. The previously created programs are required for modifying programs of multiple - Brother International BAS-311E | Programmer Instruction Manual - English - Page 174
Chapter 3 Programming with Command Function Creating double stitch Command to be used 2 M M 789L 788L 11 E Creating double stitch in the reverse direction to the sewing path. Input the width of double stitch in . Values 1.0 - 9.9 mm are available for the width. Example Width 1.5 mm - Brother International BAS-311E | Programmer Instruction Manual - English - Page 175
sound is complete, the needle point moves to the end position. Parallel stitch Command to be used 3 M M 789L 788L 11 E Creating parallel stitch in the same direction to the sewing path. Input the width of parallel stitch in . Values 1.0 - 9.9 mm are available for the width. Example Width - Brother International BAS-311E | Programmer Instruction Manual - English - Page 176
to the end position. Offset Command to be used 4 M M 789L 788L 11 E Creating offset. Input the width of offset in . Values 1.0 - 9.9 out offset on the left side to the sewing path. Carrying out offset on the right side to the sewing path. Starting offset calculations. (This is the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 177
5. Repeat steps 3 and 4 and move the needle to the end point. Input 11 E. When the alarm sound is complete, the needle point moves to the end position 9 L Specifying split (the separation point for different patterns in sewing) after feed Moving in parallel for the feed Creating split data - Brother International BAS-311E | Programmer Instruction Manual - English - Page 178
Chapter 3 Programming with Command Function 3. Input command depending on the feed. Press L if not specified. Creating split data Command to be used 220L 221L Stopping the needle at the upper end for the split. Stopping the needle at the lower end for the split. 1. Input command depending on - Brother International BAS-311E | Programmer Instruction Manual - English - Page 179
becomes 600 spm or lower. Canceling setting for low speed data 1. Move to the desired needle position for setting. 2. Select the type of low speed sewing and input the command. If multiple settings are required, input the stitch counts in 3 digits continuously and press . 178 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 180
is completed, input an end code. Command to be used 1 1 1E 1 1 2E 1 1 3E 1 1 4E 1 1 5E 1 1 0E Normal end Fixing the sewing speed at 1000 spm or lower. Not carrying out thread removal. Setting the sewing speed at 1000 spm or lower without thread removal. Carrying out no thread breakage. Fixing the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 181
Command Function Editing data Moving symmetrically to the Y axis Command to be used 0 0 1M Moving symmetrically to the Y axis passing the start point of sewing This function is available only when the needle is at the home position. 1. Make sure that the needle is at the home position. Press - Brother International BAS-311E | Programmer Instruction Manual - English - Page 182
3. Press L . Chapter 3 Programming with Command Function Moving symmetrically to a point Command to be used 0 1 1M Moving symmetrically to the sewing start position This function is available only when the needle is at the home position. 1. Make sure that the needle is at the home position. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 183
Chapter 3 Programming with Command Function Rotating a pattern clockwise (counterclockwise) Command to be used 6 6 6M 6 6 7M Rotating clockwise Rotating counterclockwise This function is available only when the needle is at the home position. Values of 1 - 359 degrees are available for input. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 184
Chapter 3 Programming with Command Function Copying a pattern rotated clockwise (counterclockwise) Command to be used 6 7 6M 6 7 7M Copying a pattern rotated clockwise Copying a pattern rotated counterclockwise This function is available only when the needle is at the home position. Values of 1 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 185
Chapter 3 Programming with Command Function Resizing Command to be used 8 8 8M F M Resizing a pattern in the X and Y directions Used to input magnification in the X direction. Used to input magnification in the Y direction. This function is available only when the needle is at the home position - Brother International BAS-311E | Programmer Instruction Manual - English - Page 186
Chapter 3 Programming with Command Function 6. Input the stitch length in 3 digits and press L . If the value is "000", the stitch count remains unchanged. The stitch length increases or decreases. Copying a pattern resized Command to be used 9 9 9M F M Copying a pattern resized in the X and Y - Brother International BAS-311E | Programmer Instruction Manual - English - Page 187
is "000", the stitch count remains unchanged. The stitch length increases or decreases. Repeated copying Command to be used 333L Copying data from the sewing start position or the feed point (excluding the number of feed boundaries to be ignored) to the current needle position for the area after - Brother International BAS-311E | Programmer Instruction Manual - English - Page 188
Chapter 3 Programming with Command Function Copying symmetrically to a point Command to be used 440L Copying data symmetrically to the current needle position from the start point or the feed point (excluding the number of feed boundaries to be ignored) to the current needle position 1. Move - Brother International BAS-311E | Programmer Instruction Manual - English - Page 189
Chapter 3 Programming with Command Function Copying to the Y axis Command to be used 442L Copying data to the Y axis passing the current needle position from the start point or the feed point (excluding the number of feed boundaries to be ignored) to the current needle position 1. Move the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 190
Chapter 3 Programming with Command Function Moving in parallel Command to be used 777L LI 7 7 7 L Changing the movement data for the current needle position. Moving data in parallel after the current needle position (using needle drop data to the moved position) 1. Move the needle to the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 191
Chapter 3 Programming with Command Function Displaying image A data image is displayed during programming or editing. 1. Press . Pattern image is displayed. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 192
data during creating and displaying. Chapter 3 Programming with Command Function Deleting a part of data Command to be used C Deletes data after stitches. If this command is used at the sewing start position, the sewing start position is deleted and the current needle position becomes the - Brother International BAS-311E | Programmer Instruction Manual - English - Page 193
Chapter 3 Programming with Command Function 192 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 194
Chapter 4 Extended Option Output - Brother International BAS-311E | Programmer Instruction Manual - English - Page 195
Output Function of extended option output Required controls for pressing motion and automatic stacking of sewing can be implemented according to various functions of the machine. When 3 conditions, i.e. output conditions, enabling conditions and disabling conditions are achieved, the extended option - Brother International BAS-311E | Programmer Instruction Manual - English - Page 196
Chapter 4 Extended Option Output Items which can be set in the extended option output The following items can be set in the submenu of the extended option output. Sets the details of the extended option output. (Refer to page 196.) Sets the details of enabling conditions. (Refer to page 197.) Reads - Brother International BAS-311E | Programmer Instruction Manual - English - Page 197
press . Extended option output No. Operation setting Output condition Timer 1 Timer 2 To cancel the set value, input 0 0 0 and press P . To register the setting into the machine, carry out operation of "Writing the extended option output data" (page 199). 196 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 198
Chapter 4 Extended Option Output Setting enabling conditions If setting is not made, the status is always enable. To carry out setting as per the extended option output conditions, do not set enabling conditions. Items to be set are as follows: Extended option output number Specify a number out of - Brother International BAS-311E | Programmer Instruction Manual - English - Page 199
read and the submenu appears. 3. Select and press . 4. Input the number of extended option output. Read data is displayed. To register the data into the machine, carry out the operation in the next page. 198 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 200
extended option output data Writes the extended option output data memorized in the programmer into a floppy disk. The data is also registered into the machine. Be sure to use a formatted 2HD floppy disk. "Formatting a floppy disk" (Refer to page 218.) One floppy disk can record the data of extended - Brother International BAS-311E | Programmer Instruction Manual - English - Page 201
Chapter 4 Extended Option Output Deleting the extended option output data Deletes the extended option output data. 1. Select and press . 2. Press . The submenu appears. 200 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 202
disabling conditions from the following: Machine operation mode Condition No. Operation sewing is started 10 After the lower thread counter changes from 1 to 0 and the lower thread needs to be replaced 11 on completion of sewing in the split mode 21 After completion of sewing in the split - Brother International BAS-311E | Programmer Instruction Manual - English - Page 203
option input 4 is OFF 48 When extended option input 5 is ON 49 When extended option input 5 is OFF 50 When extended option input 6 is ON 51 When extended option input 6 is OFF 52 When extended option input 7 is ON 53 When extended option input 7 is OFF 54 When extended option input - Brother International BAS-311E | Programmer Instruction Manual - English - Page 204
OFF 88 When extended option output 10 is ON 89 When extended option output 10 is OFF 90 When extended option output 11 is ON 91 When extended option output 11 is OFF 92 When extended option output 12 is ON 93 When extended option output 12 is OFF 94 When extended - Brother International BAS-311E | Programmer Instruction Manual - English - Page 205
12 10 5 14 15 13 6 2 3 1 7 5 6 4 8 P9(EXINB) 8 9 7 9 11 12 10 10 14 15 13 11 RESETSW Memory SW-17 ON P1 10 9 11 12 FIBER DIPSWB-8ON P3 5 4 6 13 AIR SW Memory SW-ld ON P4 12 11 9 *1 Input available for optional parts. It is not used as extended option - Brother International BAS-311E | Programmer Instruction Manual - English - Page 206
tower green Memory SW-15 ON 6 10 Signal tower yellow Memory SW-15 ON 7 11 Signal tower red Memory SW-15 ON 8 12 NEEDLE DIPSWB-4 ON 8 13 FLIP used 16 RCLAMP For the air type 1 *1 Input available for optional parts. It is not used as extended option input if conditions are met. - Brother International BAS-311E | Programmer Instruction Manual - English - Page 207
the timing chart. No explanation is given for the operation of the machine. Example 1 of extended option output Sequence 1 for stacker This is and stacking the material as soon as the work clamp is lifted after sewing. Option output 4 Option output 5 Option output 6 BAR1 for holding material - Brother International BAS-311E | Programmer Instruction Manual - English - Page 208
stacking the material as soon as the work clamp is lifted after sewing. Option output 3 Option output 4 Option output 5 Option output Description Disable condition X Condition No. Description 0 0 6 Completion of embroidering Machine returns 1 to home position 0 - - - - 0 0 - - - Brother International BAS-311E | Programmer Instruction Manual - English - Page 209
output 5 Option output 6 READY Signal ready for sewing END Signal of sewing completion THBK Signal of detecting thread breakage Timing chart 3&"%: &/% 5)#, TFD Movement of start point Movement of start point when embroidering is completed. Machine returned to home position or change of - Brother International BAS-311E | Programmer Instruction Manual - English - Page 210
Chapter 5 Reading / Writing Data - Brother International BAS-311E | Programmer Instruction Manual - English - Page 211
can be read by pressing by pressing the R/W button on the operation panel. This operation cannot be available in command mode. Data created in BAS-300 and BAS-300A series can also be read. 1. Select and press . 2. Make sure that is selected, and press . 3. Input the number of program with a numeric - Brother International BAS-311E | Programmer Instruction Manual - English - Page 212
Chapter 5 Reading/Writing Data Checking the image display (go to 7 when not checking) 4. Press and select . OFF is highlighted if selected. 5. Press to turn on. Press to turn off again. 6. Press . An image is displayed. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 213
data. Additionally read data is added to the editing data as a split data. This operation cannot be available in command mode. Data created in BAS-300 and BAS-300A series can also be read. 1. Select and press . 2. Select and press . 3. Input the number of program with a numeric key. If there is data - Brother International BAS-311E | Programmer Instruction Manual - English - Page 214
Chapter 5 Reading/Writing Data 6. Press . An image is displayed. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 215
. 3. Input the number of program with a numeric key. If there is data, appears. If there is no data, appears. If appears, the data is from BAS-300 or BAS-300A series. 214 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 216
Chapter 5 Reading/Writing Data Checking the image display (go to 7 when not checking) 4. Press and select . OFF is highlighted if selected. 5. Press to turn on. Press to turn off again. 6. Press . An image is displayed. This is the image from data saved in a floppy disk, not the image currently in - Brother International BAS-311E | Programmer Instruction Manual - English - Page 217
program to be deleted with a numeric key. If there is data, appears. If there is no data, appears. If appears, the data is from BAS-300 or BAS-300A series. Checking the image display (go to 7 when not checking) 4. Press and select . OFF is highlighted if selected. 5. Press to turn on. Press - Brother International BAS-311E | Programmer Instruction Manual - English - Page 218
Chapter 5 Reading/Writing Data 6. Press . An image is displayed. This is the image from data saved in a floppy disk, not the image currently in editing. Press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 219
Chapter 5 Reading/Writing Data Formatting a floppy disk Formats a floppy disk for the programmer. This operation cannot be available in command mode. 1. Select and press . 2. Select and press . 3. Press for formatting and press ESC - Brother International BAS-311E | Programmer Instruction Manual - English - Page 220
Chapter 5 Reading/Writing Data Reading other types of data Reads data created in other machines. The following 3 data can be read. DST DSB DSZ This operation cannot be available in command mode. 1. Select and press . 2. Make sure that is selected, - Brother International BAS-311E | Programmer Instruction Manual - English - Page 221
Chapter 5 Reading/Writing Data Checking the image display (go to 7 when not checking) 5. Press to select . 6. Press to turn on. Press to turn off again. OFF is highlighted if selected. 7. Press to select the data to display. 8. Press . If the image is displayed, press again to read data. To - Brother International BAS-311E | Programmer Instruction Manual - English - Page 222
Chapter 6 Preference - Brother International BAS-311E | Programmer Instruction Manual - English - Page 223
a smoothing function is used, data is created for equal division within the specified pitch. When data is created or edited, data outside the sewing area is not created. Display language such as error message is switched. 1. Select and press . 2. Select the item with . Selecting smoothing equal - Brother International BAS-311E | Programmer Instruction Manual - English - Page 224
5. After setting is complete, press . Chapter 6 Preference Programmer 223 - Brother International BAS-311E | Programmer Instruction Manual - English - Page 225
Chapter 6 Preference 224 Programmer - Brother International BAS-311E | Programmer Instruction Manual - English - Page 226
INSTRUCTION MANUAL BROTHER INDUSTRIES,LTD. NAGOYA,JAPAN Printed in Japan 151-V11 S93V11-112 1998.08. B ᶃ
PROGRAMMER
INSTRUCTION MANUAL
Please read this manual before using the machine.
Please keep this manual within easy reach for quick reference.
BAS-300E Series
�