Brother International BAS-311G Instruction Manual - English

Brother International BAS-311G Manual

Get Brother International BAS-311G PDF manuals and user guides View all Brother International BAS-311G manuals
Add to My Manuals
Save this manual to your list of manuals

Brother International BAS-311G manual content summary:

  • Brother International BAS-311G | Instruction Manual - English - Page 1
    BAS-300G BAS-311G BAS-326G INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. DIRECT DRIVE PROGRAMMABLE ELECTRONIC PATTERN SEWER
  • Brother International BAS-311G | Instruction Manual - English - Page 2
    very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below and the explanations given in the instruction manual. With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as the
  • Brother International BAS-311G | Instruction Manual - English - Page 3
    and their meanings This instruction manual and the indications and symbols that are used on the machine itself are provided in order to ensure safe operation of this machine and to prevent accidents , the symbol at left means "you must make the ground connection".) BAS-300G, BAS-311G, BAS-326G i
  • Brother International BAS-311G | Instruction Manual - English - Page 4
    outlet. Lightning may cause problems with correct operation. Installation Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine weighs approximately 88
  • Brother International BAS-311G | Instruction Manual - English - Page 5
    positions and check that they operate correctly before using the machine. To prevent accidents and problems, do not modify the machine yourself. Brother will not be held responsible for any accidents or problems resulting from modifications made to the machine. BAS-300G, BAS-311G, BAS-326G iii
  • Brother International BAS-311G | Instruction Manual - English - Page 6
    sewing machine. Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are difficult to read, please contact your nearest Brother problems with correct operation may also occur. 5 Direction of operation iv BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 7
    Motor cover Tension release solenoid cover Inner cover L Outer cover Fixed cover L Motor cover L Eye guard Finger guard Thread take-up cover Inner cover R Outer cover Fixed cover R Motor cover R Gas spring support cover 2960B BAS-300G, BAS-311G, BAS-326G 2961B v
  • Brother International BAS-311G | Instruction Manual - English - Page 8
    46 7. USING CF CARDS 47 7-1. Notes on handling CF cards (sold separately) ...47 7-2. Structure of a CF card folder 47 7-3. Data read/write mode 48 7-3-1. Reading all sewing data from the CF card at once 49 7-3-2. Writing all sewing data to the CF card at once 50 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 9
    SEWING 51 8-1. Sewing 51 8-2. Using the STOP switch 52 8-3. Using 55 10-1. Checking the machine head switch 55 10-2. Thread take-up spring 56 10-3. Arm thread guide R 56 10-4. Adjusting 11. TABLE OF ERROR CODES 67 12. TROUBLESHOOTING 71 13. 7-SEGMENT DISPLAY 74 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 10
    1. NAMES OF MAJOR PARTS 1. NAMES OF MAJOR PARTS Two-pedal foot switch (1) Power switch (2) Control box (3) CF slot (4) Operation panel (5) Foot switch (motor-driven work clamp specifications) (6) Work clamp switch (pneumatic work clamp
  • Brother International BAS-311G | Instruction Manual - English - Page 11
    SPECIFICATIONS 2. SPECIFICATIONS 2997B Sewing machine Lock stitch pattern tacking sewing machine (with large shuttle hook) Stitch formation Single needle lock stitch Max. sewing speed 2,700 sti/min Max. sewing area (XxY) BAS-300G: 130 x 60 mm BAS-311G: 130 x 100 mm BAS-326G: 220 x 100 mm
  • Brother International BAS-311G | Instruction Manual - English - Page 12
    Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine head weighs approximately shock, and problems with correct operation may also occur. Install the safety covers to the machine head and motor. 3 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 13
    is at least 10 mm away from the leg. If the control box and the leg are too close together, it may result in incorrect sewing machine operation. Only the holes for installing the operation panel and the hole for the cord differ from the above diagram. Refer
  • Brother International BAS-311G | Instruction Manual - English - Page 14
    the oil pan. (Refer to "3-7. Installing the treadle unit (motor-driven work clamp specifications)".) (1) Oil pan (2) Nails [7 pcs.] (3) Rubber cushions [4 pcs.] (4) Waste oil tank 4911Q 5 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 15
    the machine head, do not hold it by the pulse motor. This may cause problems with operation of the pulse motor. 2966B (4) Hinge holders [2 pcs.] (5) Bolts [4 pcs.] (6) Plain washers [4 pcs.] (7) Nuts [4 pcs.] (8) Head rest (9) Bolts with washer [4 pcs.] 4913Q BAS-300G, BAS-311G, BAS-326G 6
  • Brother International BAS-311G | Instruction Manual - English - Page 16
    looking from the front of the sewing machine (the direction of the arrow in the illustration), and then gently tilt back the machine head. NOTE: Two or more people should tilt back the machine head, and it should be tilted gently while being held with both hands. 2969B BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 17
    24), spring washers (25) and nuts (26) in the places marked with * are also used to install the treadle unit. (Refer to "3-7. Installing the treadle unit (motor-driven work clamp specifications)".) (29) Gas spring support cover (30) Bolts with washer [6 pcs.] 4916Q BAS-300G, BAS-311G, BAS-326G 8
  • Brother International BAS-311G | Instruction Manual - English - Page 18
    the front of the sewing machine). 2. Stand at the left side of the table, and gently tilt the machine head towards you. machine head. If you try to tilt back the machine head while the work clamp arm (1) is still on the left side, it may damage the outer cover L (2). 9 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 19
    in the side of the control box. (6) Staples [3 pcs.] (1) Operation panel base (2) Cushion A (3) Plain washers (medium) mm. (8) Operation panel (9) Operation panel stand (10) Bolts [3 pcs.] (11) Rubber seat (12) Bolt • Pass the cord from the operation panel (8)
  • Brother International BAS-311G | Instruction Manual - English - Page 20
    , and when the start switch (right) is depressed, the sewing machine starts sewing. * The work clamp lowering method can be changed using memory switch No. 002. (Refer to "6-3. List of memory switch settings.") 2972B Work clamp switch (2-step) Start switch 4923Q 11 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 21
    pin Machine head switch 3-pin Home position sensor assembly 12-pin STOP switch 6-pin Valve harness 12-pin (pneumatic work clamp specifications) Programmer relay ) Cord clamp (3) (3) (3) (3) (3) (4) (4) (4) (4) P7 (PRG) (3) P3（CUTTER） － (Continued on next page) BAS-300G, BAS-311G, BAS-326G 12
  • Brother International BAS-311G | Instruction Manual - English - Page 22
    PCB> Press the tab. 1843B Connector Machine head memory 7-pin Upper shaft motor 3-pin Synchronizer 14-pin Connector Work /cable tie (4) (5) (5), (6) Cable tie (5), (6) (5), (6) (5), (6) (5), (6) (5), (6) (Continued on next page) 13 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 23
    receiving a serious electric shock, and problems with correct operation may also occur. (1) Ground wire from upper shaft motor harness (2) Ground wire from the machine head (3) Ground wire from operation panel are secure in order to ensure safety. 2973B BAS-300G, BAS-311G, BAS-326G 14
  • Brother International BAS-311G | Instruction Manual - English - Page 24
    supply. * The inside of the control box uses single-phase power. NOTE: Do not use an extension cord. If this is not observed, it may cause problems with correct operation. Green nut (3) so that the cotton stand does not move. 2974B 15 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 25
    corresponding number. 1904B Cylinder R Cylinder L Upper knob Lower knob Manual button You can use the valve knobs to adjust the lifting and lowering speeds. The the power is turned off by pressing the manual button. 5220Q 1905B BAS-300G, BAS-311G, BAS-326G 16
  • Brother International BAS-311G | Instruction Manual - English - Page 26
    eye guard CAUTION Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result. (1) Screw (loosen) (2) Eye guard NOTE: Be careful not to clamp the cords when installing the motor cover. 2976B 17 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 27
    glass. If the oil drops below the one-third level, there is the danger that the machine may seize during operation. ・ BAS-300G-03[] ・ BAS-311G ・ BAS-326G ・ BAS-300G-01[] ・ BAS-300G-02[] 1845B 4940Q 3. Pour oil in through the two holes of the shuttle race base
  • Brother International BAS-311G | Instruction Manual - English - Page 28
    machine head fixing bolt When transporting the sewing machine, secure the machine head to the table with the machine head fixing bolt. (1) Plain washer (2) Machine head fixing bolt NOTE: When operating the sewing machine, remove the machine head fixing bolt. 5021Q 19 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 29
    . (Refer to following page.) 2977B [If using cotton thread or spun thread] [If using synthetic thread] BAS-300G-03[], BAS-311G, BAS-326G BAS-300G-01[], 02[] Thread the upper thread 2370B Needle cooler 2978B • Turn the machine pulley (2) and raise the thread take
  • Brother International BAS-311G | Instruction Manual - English - Page 30
    Threading mode> Threading mode is safe because the sewing machine will not start even when the foot switch is depressed. 1 Turn on the power switch. 2 All will return to where it was before threading mode was started. THREAD/CLAMP indicator switches off 21 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 31
    PREPARATION BEFORE SEWING Do not touch any of the moving parts or press any objects against the machine while winding the lower thread. Injury or damage to the sewing machine may result. 4429Q tension assembly (8) down, and for case B, move it upward. For case B BAS-300G, BAS-311G, BAS-326G 22
  • Brother International BAS-311G | Instruction Manual - English - Page 32
    power switch before installing the bobbin case. If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. 2534Q 30mm 4945Q 1. Pull the shuttle race cover (1) insert the bobbin case into the rotary hook. 2535Q 23 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 33
    tension 2536Q 1. Turn the tension nut (1) (main tension) to adjust the tension as appropriate for the material being sewn. 2. Use the tension nut (2) (sub tension) to adjust the upper thread trailing length to about 40 mm. Stronger Weaker Stronger Weaker 2153B BAS-300G, BAS-311G, BAS-326G 24
  • Brother International BAS-311G | Instruction Manual - English - Page 34
    using a two-pedal foot switch, lower the work clamp before depressing the start switch (6).) The sewing machine sewing start position. NOTE: If error "E110" appears when the foot switch is depressed, turn the pulley (1) in the direction of operation to clear the error. BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 35
    when the THREAD/CLAMP key (6) has been pressed. (8) TENSION/WIND key Used to wind the lower thread. (9) TENSION/WIND indicator Spare (10) 11) Y-SCALE indicator Illuminates when the SELECT key (15) is pressed to shown the Y-scale setting. 4435Q (Continued on next page) BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 36
    (15) SELECT key Used to select a menu (X-scale, Y-scale, sewing speed and counter). ( Used to select user programs and to set and select cycle programs. (23) R/W key Used to read data from and write data to external media. CFTM is a trademark of SanDisk Corporation. 27 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 37
    when inserting and removing the CF card. If this is not done, dust may get inside and cause problems with operation. 4453Q 2 Turn on the power switch. Press the or key "5-6. Checking the sewing pattern" to check that the needle drop position is correct. 4954Q BAS-300G, BAS-311G, BAS-326G 28
  • Brother International BAS-311G | Instruction Manual - English - Page 38
    Depress the foot switch to the 2nd step. (If using a two-pedal foot switch, lower the work clamp sewing pattern" to check that the needle drop position is correct. 5-5. Setting the sewing speed The sewing sewing speed. (Sewing speed setting: 400 − 2700) 4956Q 29 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 39
    PANEL (BASIC OPERATIONS) 5-6. Checking the sewing pattern Use test feed mode to check the needle foot switch to the 2nd step, sewing will start. (If using a two-pedal foot switch, depress the start switch.） 4441Q Press the TEST key. TEST indicator switches off BAS-300G, BAS-311G, BAS-326G 30
  • Brother International BAS-311G | Instruction Manual - English - Page 40
    using the operation panel. * For pneumatic work clamp specifications, only threading mode and intermittent presser foot height setting mode will be available. 1 All indicators switch off Press the THREAD/CLAMP key. The sewing machine assembly (2). 4959Q 5254Q 31 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 41
    5. USING THE OPERATION PANEL (BASIC OPERATIONS) 3 Press the key. The sewing machine will switch to intermittent presser foot height setting mode. • " 4" will appear in to "10-14. Changing the intermittent stroke" when making the adjustment. 5033Q BAS-300G, BAS-311G, BAS-326G 32
  • Brother International BAS-311G | Instruction Manual - English - Page 42
    the production counter". 4 When SPEED indicator is illuminated Production counter temporary display function Refer to "6-5. Using the production counter". 5 User program setting mode Refer to "6-7. Using user programs". 33 BAS-300G, BAS-311G, BAS-326G 4488Q 4489Q 4490Q 4491Q 4492Q 4493Q
  • Brother International BAS-311G | Instruction Manual - English - Page 43
    switches 1 All indicators switch off 6. USING THE OPERATION PANEL (ADVANCED OPERATIONS) 4452Q Press the TEST key. • The changes will be memorized and the sewing machine will switch to home position detection standby. TEST indicator switches off • If long beep. BAS-300G, BAS-311G, BAS-326G 34
  • Brother International BAS-311G | Instruction Manual - English - Page 44
    403 0 Continuous split (split menu is disabled before split detection) 1 Continuous split (split menu is always enabled) 2 Independent split * The mm display may differ slightly from the actual sewing size. Initial value ON 0 2 OFF OFF OFF OFF OFF OFF 0 35 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 45
    use the lower thread counter to set the number of articles which can be sewn with the amount of lower thread available, you can stop the lower thread running out in the middle of sewing a pattern will sound continuously. The sewing machine will not operate during this BAS-300G, BAS-311G, BAS-326G 36
  • Brother International BAS-311G | Instruction Manual - English - Page 46
    THE OPERATION PANEL (ADVANCED OPERATIONS) 6-5. Using the production counter 1 While pressing the TEST key, press (1) to switch the menu back to the normal menu display. * You can start sewing while the temporary display still appears. 37 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 47
    mode is always enabled) • Sewing is carried out each time in the order of steps 1 → 2 → 3 → 1 (for example, if there are two sections of split data). [Independent split] Memory switch No. 403 = 2 • The pattern for the displayed split number is sewn independently. BAS-300G, BAS-311G, BAS-326G 38
  • Brother International BAS-311G | Instruction Manual - English - Page 48
    .） If you are sewing certain patterns over and over again, it is useful to record the settings for these patterns into a user program sewing speed. Press the SELECT key. 4472Q Press the recorded. SPEED indicator flashes or key to set the sewing speed to be 4474Q 39 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 49
    6. USING THE OPERATION PANEL (ADVANCED OPERATIONS) 6 Next, set the work clamp height number will flash in the PROGRAM No. display, and the sewing machine will switch to home position detection standby. TEST indicator switches off, MENU indicator illuminates BAS-300G, BAS-311G, BAS-326G 4971Q 40
  • Brother International BAS-311G | Instruction Manual - English - Page 50
    using function keys F1 to F4 (2). (Refer to "6-9. Direct selection".) 2. Check that the needle drop position is correct, and then start sewing. (Refer to "5-6 Checking the sewing pattern a cleared user program has been stored as part of a cycle program, the step that BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 51
    One cycle program can contain up to a maximum of fifteen steps. When sewing the sewing patterns in numerical order, it can be useful to record them in a cycle program beforehand. Cycle programs are enabled when the SELECT key until the desired step is reached. BAS-300G, BAS-311G, BAS-326G 42
  • Brother International BAS-311G | Instruction Manual - English - Page 52
    cannot be changed at this time. NOTE: If cycle program sewing mode is active (when memory switch no. 401 is "ON") but no cycle programs have been recorded, the user programs will be sewn in numeric order. "C-0" will appear in the PROGRAM No. display at this time. 43 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 53
    (combination table) You can use the function keys to directly using function keys F1 to F4. U5 to U10 and C-5 to C-9 can be selected by simultaneously pressing combinations of function keys F1 to F4 (addition). U5/C-5 U6/C-6 U7/C-7 Or Or Or U8/C-8 U9/C-9 U10 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 54
    sewing pattern in a parallel direction up, down or to the left or right. 1 Press the or key to select a program number, and then depress the foot switch to the 2nd step. (If using not be reset. (Refer to the service manual for details on memory switch No. 465.) 45 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 55
    6. USING THE OPERATION PANEL (ADVANCED OPERATIONS) 6-11. Clearing memory data (reinitialization) If the sewing machine stops operating normally, the cause may be that an incorrect memory setting may have been made by means of the memory switch, for instance. In such cases, normal operation may be
  • Brother International BAS-311G | Instruction Manual - English - Page 56
    manufacturers can be used, but different formatting methods may mean that loading from or writing to such cards may not be possible. sewing data for different sewing machines on a single CF card. (Refer to the service manual for details on memory switch No. 752.) 47 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 57
    dust may get inside and cause problems with w 4 r 5 w 6 r 7 w 8 r 9 w 10 r 11 w 12 r 13 r 14 Menu display [-SEd] [SEd-] [-MEM] [MEM used to update the firmware version. Error log data is written to the CF card. Sewing data is read from the floppy disk. (*2) (*3) Sewing BAS-300G, BAS-311G, BAS-326G 48
  • Brother International BAS-311G | Instruction Manual - English - Page 58
    be used with this sewing machine is data that has been created for the BAS-300G series. *2 Only valid when using an optional floppy disk drive. *3 Sewing data for the BAS-300 series, BAS-300A series and BAS-300E/F series can be read. *4 Refer to the instruction manual for the programmer for details
  • Brother International BAS-311G | Instruction Manual - English - Page 59
    7. USING CF CARDS 7-3-2. Writing all sewing data to the CF card at once 1 Select the [w 2] data read/write mode. 4578Q 2 Press the R/W key the cover of the CF slot. TEST indicator switches off Refer to the service manual for details on other read/write modes. BAS-300G, BAS-311G, BAS-326G 50
  • Brother International BAS-311G | Instruction Manual - English - Page 60
    the bobbin and needle • When not using the machine and when leaving the machine unattended Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. 8-1. Sewing 4978Q 1. Turn on the power switch
  • Brother International BAS-311G | Instruction Manual - English - Page 61
    step. (If using a two-pedal foot switch, depress the start switch.) • The sewing machine will start operating and sewing will start. 4441Q 8-3. Using the thread wiper switch The thread wiper switch (1) can be used to turn the thread wiper (2) on and off. 4983Q BAS-300G, BAS-311G, BAS-326G 52
  • Brother International BAS-311G | Instruction Manual - English - Page 62
    If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. Be do not drink or eat the lubricating oil or grease. They may cause diarrhea or vomiting. Keep the oil out of the reach guide and the shuttle race. 4986Q 53 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 63
    . 9-5. Checking the needle 2208B Always check that the tip of the needle is not broken and also that the needle is not bent before starting sewing. 2372B 9-6. Lubrication Lubricate the sewing machine while referring to "3-16. Lubrication". BAS-300G, BAS-311G, BAS-326G 54
  • Brother International BAS-311G | Instruction Manual - English - Page 64
    correctly before using the machine. 10-1. Checking the machine head switch Check that the machine head switch is turned on as shown in the illustration. NOTE: If the machine head switch is not turned on, errors "E050", "E051" and "E055" will be generated. 5226Q 55 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 65
    01 guide R (1) to adjust. * When sewing heavy material, move arm thread guide R (1) to the left. (The thread take-up amount will become greater.) * When sewing light material, move arm thread guide R (1) to the right. (The thread take-up amount will become less.) 5030Q BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 66
    center of the needle. * If using a DP X 5 needle, use the second reference line from the top may cause poor thread tension. Furthermore, if it does not cross the needle at all, the tip of the rotary hook will interfere with the needle and skipped stitches may occur. 57 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 67
    is 0.01 to 0.08 mm. 10-8. Adjusting the shuttle race thread guide 3574Q Install the shuttle race thread guide (1) by guide is in the wrong position, thread breakages, soiled thread or tangling of the thread may occur. The position of the shuttle race thread guide BAS-300G, BAS-311G, BAS-326G 58
  • Brother International BAS-311G | Instruction Manual - English - Page 68
    side of thread trimmer cam> Reverse position 5255Q 5233Q 1. Open the top cover and tilt back the machine head. 2. Turn the pulley (1) by hand in the direction of the arrow to move the needle bolt (7), check the above position once more. (Continued on next page) 59 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 69
    needle bar to its lowest position. 8. Loosen the nut (10), tighten the set screw (11) until the collar (3) is touching the inside of the groove in the thread trimmer cam the ridge line on the shuttle race thread guide (12) when there is still play between the parts. BAS-300G, BAS-311G, BAS-326G 60
  • Brother International BAS-311G | Instruction Manual - English - Page 70
    knife spacer (11). 6. Check use a thicker movable knife spacer. 7. Apply grease to the pin (12), place it into the movable knife connecting plate (13), and install it to the needle plate (5). 8. Check that the needle is aligned with the center of the needle hole. 61 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 71
    10-11-1. Installing the feed plate 1 All indicators move to the feed plate installation position and then the work clamp will rise. 4441Q Index mark Use a 2 mm diameter pin to align the holes in the X feed bracket (1) and the needle mode Turn off the power. BAS-300G, BAS-311G, BAS-326G 62
  • Brother International BAS-311G | Instruction Manual - English - Page 72
    the screw (2) so that the distance from the bottom of the presser foot to the top of the needle plate is 22 mm when the sewing machine is stopped and the presser foot (1) is raised. 5031Q 63 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 73
    will as given in the following table. Installation position Intermittent stroke range A 2 − 4.5mm B 4.5 − 10mm C 0 mm (Intermittent presser foot does not move up and down) 5012Q BAS-300G, BAS-311G, BAS-326G 64
  • Brother International BAS-311G | Instruction Manual - English - Page 74
    on the needle bar (reference line B) is aligned with the lower edge of the needle bar bush (5). (If using a DP x 5 needle, align with the second reference line from the top (reference line b).) 4. Open the adjust until the two points mentioned above are not touching. 65 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 75
    Adjusting the work clamp lift amount The operation panel settings can be used to adjust the height to within 15 − 25 mm. (Refer to "5-7. Setting the work clamp to drain the water. NOTE: Open the air cock (4) slowly. 1912B BAS-300G, BAS-311G, BAS-326G 66
  • Brother International BAS-311G | Instruction Manual - English - Page 76
    return the machine head to its original position. Check that connector P9 on the main PCB is properly connected. E065 An operation panel key was still being pressed when the power was turned on, or key is faulty. Turn off the power and check the operation panel. 67 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 77
    problem during test feeding. Turn off the power, and then check if there are any problems in the Y-feed direction. E217 Y-feed motor stopped due to a problem during programming. Turn off the power, and then check if there are any problems in the Y-feed direction. BAS-300G, BAS-311G, BAS-326G 68
  • Brother International BAS-311G | Instruction Manual - English - Page 78
    and then turn it back on again. E452 Machine head memory is not connected. Turn off the power, and then check that connector P3 on the power supply motor PCB is properly connected. E474 Internal memory is full and copying is not possible. Clear the sewing data. 69 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 79
    PCB is properly connected. If an error code that is not listed above appears or if carrying out the specified remedy does not solve the problem, contact the place of purchase. BAS-300G, BAS-311G, BAS-326G 70
  • Brother International BAS-311G | Instruction Manual - English - Page 80
    . CAUTION Turn off the power switch and disconnect the power cord before carrying out troubleshooting. If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. Problem Cause Remedy Reference Work clamp does not lift. Work clamp does not drop
  • Brother International BAS-311G | Instruction Manual - English - Page 81
    suitable for the sewing conditions. Thread take-up spring tension and Adjust the tension and height of the height are incorrect. thread take-up spring. Needle and incorrect. rotary hook timing is Adjust the needle bar lift amount. P. 24 P. 24 P. 56 P. 57 BAS-300G, BAS-311G, BAS-326G 72
  • Brother International BAS-311G | Instruction Manual - English - Page 82
    12. TROUBLESHOOTING Problem Cause Upper thread is not machine head switch cord is disconnected. Adjust the position of the machine head switch. If the machine head switch is malfunctioning, replace it with a new one. P. 24 P. 56 P. 56 P. 56 P. 24 P. 61 P. 12 P. 9 73 BAS-300G, BAS-311G, BAS-326G
  • Brother International BAS-311G | Instruction Manual - English - Page 83
    13. 7-SEGMENT DISPLAY 13. 7-SEGMENT DISPLAY ０ １ ２ ３ ４ ５ ６ ７ ８ ９ Ａ Ｂ Ｃ Ｄ Ｅ Ｆ Ｇ Ｈ Ｉ Ｊ Ｋ Ｌ Ｍ Ｎ Ｏ Ｐ Ｑ Ｒ Ｓ Ｔ Ｕ Ｖ Ｗ Ｘ Ｙ Ｚ BAS-300G, BAS-311G, BAS-326G 74
  • Brother International BAS-311G | Instruction Manual - English - Page 84
    * Please note that the contents of this manual may differ slightly from the actual product purchased as a result of product improvements. © 2005, 2008, 2010, 2011 Brother Industries, Ltd. All Rights Reserved. This is the original instructions. BAS-300G, 311G, 326G SA6236-401 E 2011.03. B (1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
BAS-300G
BAS-311G
BAS-326G
Please read this manual before using the machine.
Please keep this manual within easy reach for quick reference.
DIRECT DRIVE
PROGRAMMABLE ELECTRONIC PATTERN SEWER
INSTRUCTION MANUAL