Brother International BAS-326EL Extended Option Output Instruction Manual - En
Brother International BAS-326EL Manual
View all Brother International BAS-326EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BAS-326EL manual content summary:
- Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 1
Text for extended option output This is a complement of the chapter 4 "Extended option output" of the instruction manual for BAS300E series programmer and helps users take advantage of extended option output showing programming examples. This text is composed of two chapters; "Basic" containing - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 2
Contents Basic...3 1. Preparation...3 2. Examples of simple option output 3 2-1 ON & OFF operation synchronizing with one machine operation 3 2-2 Modifying programmed data 4 2-3 Programming ON and OFF separately 4 2-4 Setting option output No. to ON using trigger data during sewing 5 2-5 - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 3
pneumatic work clamp (except for BAS-311E solenoid specification) Control PROM version MN-C or later (products manufactured in or after June 1998 are equipped with this PROM as a standard part.) Programmer Instruction manual for programmer (see the instruction manual for page reference.) 2. Examples - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 4
„Press the P key to turn off the display of the programmer, and turn the power off and on again. Since initial setting is done when the power is turned ON, turn the power off and on after writing extended option output. In this case, the output No. 15 is initial-set to work as an extended option not - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 5
(option output No. 15: OFF). This is for checking the case that the output conditions of ON and OFF are different. •Prepare the programmer, and display the output setting screen. ,Referring to the condition number table of machine operation mode (see page 191), set the option output No. 15 to ON - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 6
programmer. „Press the P key again, read the sewing data and edit it, and input the trigger data at a desired position (see page 100 of the instruction manual for the programmer). Set the option output No. 15, and sewing stop: OFF. Input on the setting screen as follows: ...Put the sewing data in - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 7
ƒReferring to the condition number table of the extended option output (see page 193), set the condition No. 98 (when No. 15 is ON), the timer 1 to 0.5 second (500ms), and the timer 2 to 0.7 second (700ms). Input on the setting screen as follows: „After overwriting the option program to the FD, - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 8
ƒAfter overwriting the option program to the FD, press the P key to turn off the display of the programmer, and then turn the power off and on again. If enabling conditions have been set, the enabling condition is set to "DISABLE" immediately after the power is turned on. „Read the sewing data and - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 9
out, extended option output data can be registered again. Extended option output is also deleted by the all-clear operation of the machine (see the instruction manual for the machine). 9 - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 10
operation by input check). „Sequence output can not be accomplished during sewing. By inputting trigger data of the sewing data (see page 100 of the instruction manual for the programmer), it is possible to turn the output ON or OFF. By inputting trigger data, it is possible to pause the machine and - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 11
„Write the option program to the FD, press the P key to turn off the display of the programmer, and then turn the power off and on again. ...Read the sewing data. Press the starting pedal so that the feed moves to a sewing start position after the origin position is detected. Pressing the starting - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 12
•Read the written data with the FD read icon. ,Display the enabling condition setting screen. Referring to the condition number table of the extended option output (see page 193), set the enabling condition of No. 1 to the condition No. 72 (output 2: ON): ENABLING ¡ and the condition No. 73 (output - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 13
ON since the power was turned ON, the virtual output No. 2 can not be ON. 3-4 Emergency stop during sequence Program the example 1 of the instruction manual and check the option output at emergency stop •Delete the registered option program with the delete icon, and turn the power off and on again - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 14
4. Programming 4-1 Selecting hardware on output side Output is NPN open collector output. PCB internal circuit +24V COM terminal Load Output I = 70mA terminal On the assumption that output activates the air valve (option part). Use a 24 VDC relay if not using a 24 V air valve. PCB internal - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 15
4-3 Creating the I/O layout table Complete the table with selected hardware. Option output table Option Layout output No. Name Explanation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 *Common terminal of P4 is pin 11, and output voltage is +24V *Common terminal of P21 is pin 9 and - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 16
Option input table Option input No. Name Layout Explanation 1 2 3 4 5 6 7 8 9 10 11 12 13 Connector No. Pin Signal +24V 0V P8 2 3 1 (EXINA) 5 6 4 8 9 7 11 12 10 14 15 13 P9 2 3 1 (EXINB) 5 6 4 8 9 7 11 12 10 14 15 13 P1 10 9 11 P3 5 4 6 P4 12 11 - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 17
. •Create the timing chart showing ON and OFF of I/O in operation order. ,Based on the timing chart and condition number table (see instruction manual page 191-), create a program setting value table. ƒInput program setting value by the programmer. 4-5 Starting condition added to the first edition - Brother International BAS-326EL | Extended Option Output Instruction Manual - En - Page 18
Parts for extended option output P4 AIR Housing and pin for connector For option output 1-3 and12-16 For option input 13 Manufacturer Housing production code Pin contact production code Crimping tool production code Japan Solderless Terminal MFG. Co., LTD. H12P-SHF-AA BHF-001T-0.8BS YC-122R P21
Text for extended option output
This is a complement of the chapter 4 “Extended option output” of the instruction manual for
BAS300E series programmer and helps users take advantage of extended option output showing
programming examples.
This text is composed of two chapters; “Basic” containing the programming examples which
enables operation check using standard sewing machine only, and “Advanced” containing the
programming examples for users who create the check PCB by themselves.