Brother International BAS-411 Instruction Manual - English
Brother International BAS-411 Manual
View all Brother International BAS-411 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BAS-411 manual content summary:
- Brother International BAS-411 | Instruction Manual - English - Page 1
SINGLE HEAD ELECTRONIC EMBROIDERY MACHINE INSTRUCTION MANUAL BAS-411 - Brother International BAS-411 | Instruction Manual - English - Page 2
- Brother International BAS-411 | Instruction Manual - English - Page 3
1 Default sewing of patterns 15 2 Default sewing 18 II PREPARATION 21 1 Attaching embroidery hoop to holder base 21 2 Inserting floppy disk 23 3 Names and functions of operation panel 24 4 Preparation of machine 32 111 ENTRY 38 Summary of main menu 38 1 Entering alphanumerics and - Brother International BAS-411 | Instruction Manual - English - Page 4
in BAS-411 66 Editing machine 154 Connecting cable with the paper tape reader 155 Operating and preparing paper tape reader 156 What's needed? 157 IIlOTHER 158 1 Recommendation on embroidering 158 2 Error messages 159 3 Troubleshooting 162 4 DIP switch functions 166 5 Embroidery - Brother International BAS-411 | Instruction Manual - English - Page 5
length Storage medium Bobbin thread trimming Bobbin thread winding Needle thread breakage Power supply Weight Dimensions Options 9 needle embroidery machine Pattern embroidery Maximum 1000 spm ( 6 levels) normal rotation rate 650 spm V285mm x H450mm 0.1 mm - 12.7 mm (minimum pitch 0.1 mm) 3.5" 2DD - Brother International BAS-411 | Instruction Manual - English - Page 6
dial of liquid crystal display speed dial X•Y carriage guard bar disc drive *Standard hoop and holder base *Optional accessories (sold separately) •Embroidery hoop plastic square hoop (45 x 32) •Cap frame device •Boring attachment •Design floppy disks sports, flowers, animals, zodiac signs - Brother International BAS-411 | Instruction Manual - English - Page 7
table wobbles, loosen the nuts @ and turn the level adjusters 0 to adjust. When moving the machine, lift the level adjusters 0 so that the machine can be moved by the casters ID on the machine body. E: Installing operation panel cord holder 1) Attach the keyboard cable and the grounding wire 0 to - Brother International BAS-411 | Instruction Manual - English - Page 8
bolt and washer from the bottom side of the frame. 3) Install covers RD 0 and LD @ with the screws. 0 El Setting up machine Needle bar case side Before shipping, the machine is set as shown in the figure on the left. Turn the clutch knurl 0 until its red mark © is on the needle - Brother International BAS-411 | Instruction Manual - English - Page 9
1-2 drop(s) of oil at the each arrow in the figure. [NOTE] O Be sure to use the brother-specified sewing machine oil for lubrication. 2 Too much lubrication may cause the oil to drip on the material. 1) Lubricate the six places at the arrows. oR cE) 2) Add a - Brother International BAS-411 | Instruction Manual - English - Page 10
Move the needle bar case all the way to the right or the left side. From the side of the machine head, apply one or two drop(s) of grease to the base needle bar and the base needle bar felt. When the machine is used every day, lubricate daily before using. -6- - Brother International BAS-411 | Instruction Manual - English - Page 11
all the way until it meets the end of the needle bar. Tighten the thumb screw 0 firmly. [NOTE] Set the needle so that the notched part comes on the rotary-hook side. [NOTE1] [NOTE2] When using special threads such as the gold, silver and rams yarn, use a heavy-duty needle (#11 - Brother International BAS-411 | Instruction Manual - English - Page 12
of the arrow. 5) Press the bobbin presser 0. [NOTE] If the thread is not wound evenly on the bobbin, loosen the screw 0 and move the thread guide @right and left. When winding more thread on the bobbin, loosen the screw (3, then move the bobbin presser O. 6) When the winding is finished, remove the - Brother International BAS-411 | Instruction Manual - English - Page 13
it once around around the tension disk clockwise. 5) Pass the thread through the upper hole of the 2-stage thread guide, then thread the thread breakage detector spring. 6) Put the thread on the inner thread guide through the hole of the thread take-up. Pass the thread through the inner thread - Brother International BAS-411 | Instruction Manual - English - Page 14
bobbin thread tension (20-30g) . © Use a tension gauge to adjust. Increase tension' 'ts Decrease tension Keep the machine clean and unclogged to prevent machine trouble. Keep the machine clean: Remove dirt with a soft, dry cloth. If necessary, clean with the detergent-soaked cloth, then wipe off - Brother International BAS-411 | Instruction Manual - English - Page 15
10 El Adjusting needle bar height 9mm Tighten screw so that clearance is the same at all points. needle bar guide rail oi This part should not contact anything nearby. . D needle bar guide rail 1) Lower the needle bar to its lowest position. When the needle tip is raised 9 mm above the center - Brother International BAS-411 | Instruction Manual - English - Page 16
. 3) Loosen the screw 0 of the needle bar clamp 0. Turn the pulley until the needle tip lightly contacts the gauge. [NOTE] Do not use the flat part of the gauge at this time. 4) Tighten the screw 0 of the needle bar clamp firmly. [NOTE] Check the stopper adjustment procedure on page 11 again - Brother International BAS-411 | Instruction Manual - English - Page 17
10 4 Adjusting timing of needle and rotary hook Figure A Aprrox. 1mm 4 f=1 tt I 1-• in I I r a) 2.3mm 0 (5-9:1-7) 1) Select the first needle bar 0. 2) Remove two screws and the needle plate 8. 3) When the needle bar is raised 2.3 mm (201°) above its lowest position (1801, loosen the screw - Brother International BAS-411 | Instruction Manual - English - Page 18
) Alphabets (monogram) 1. Attaching embroidery hoop to holder base 2. Inserting floppy disc 3. Names and functions of keys on operation panel 4. Preparation of machine Alphabet entry Alphanumerics and symbols Code entry ASCII code Letters and symbols Pattern entry File names 1. Enlargement - Brother International BAS-411 | Instruction Manual - English - Page 19
T DEFAULT SEWING 14O CIRE I STAFF WE CREATE THE NEXT APPAREL GENERATION BROTHEI? /NOMA LTD. To embroider the pattern above (four-colored, file name :STAFF ) : 1. Turn on the Power. E T ENTER S Main menu is displayed. 2. Insert the design floppy disc. 3. Press the key to enter the data [ - Brother International BAS-411 | Instruction Manual - English - Page 20
(function selection) mode. 10. Pressing the < START > key begins sewing. The number on the LED indicators shown during sewing indicates the rotation of the sewing machine. After needle number 1 sewing finishes, the next needle number is displayed. -16- - Brother International BAS-411 | Instruction Manual - English - Page 21
11- Default sewing of patterns {3) cs IViov N 1234 11. After sewing, return to the sewing (function selection) mode again. In this part, sewing a pattern with four colors ends with the needles in correct numerical order. The needle numbers can be set arbitrarily. Refer to "Sewing function " and " - Brother International BAS-411 | Instruction Manual - English - Page 22
], [EDIT], [COMMUNICATE], [START(SEWING)] will be displayed. 2. Press the key on the operation panel to enter the data. SHIFT 1 to P 3. Type "Brother". 1) For a capital "B", press the key, then press the key. 2) Release the key by pressing it twice. Then press the - Brother International BAS-411 | Instruction Manual - English - Page 23
4-1 [1-) [4 [4 START Brother'* NEN:1 STYLO1 N ST ts113N TSt: a 6. Select the sewing position using the jog key. 7. Press the key for sewing. 8. After sewing, the display wil l return to the sewing (function selection) mode again. -19- - Brother International BAS-411 | Instruction Manual - English - Page 24
(3 tr Screen (1) Screen (2) LNG(V = vertical H = horizontal) All (W = width, H = height) Screen (3) ~RePT : H direc 1time SPC : 000 mm ATHC LIJ St Hoop:IVIanu Screen (5) Satin Jump: SR 12.7 mm Screen (4) (STR_R BORING SHIFT : Or4 :Off : Off NOTE: - Brother International BAS-411 | Instruction Manual - English - Page 25
A, and fix the one on the right side of the hoop as shown in figure B. Secure the screws 0. 4) Improper setting of the material in the embroidery hoop may cause skipped stitches, thread breakage, or puckering. Use the screw O for adjustment. -21 - - Brother International BAS-411 | Instruction Manual - English - Page 26
tubular square hoop to holder base [NOTE] Before using the tubular square hoop and the holder base, remove table (C) of the embroidery machine. H IlttHVVVV fig B boats t Qi5 0 fig C e 0 0 1) Attach the tubular square frame @to the X carriage Owith the two screws @ as shown in figure - Brother International BAS-411 | Instruction Manual - English - Page 27
Inserting Ejecting 0 [NOTE 1] [NOTE 2] If the floppy disk is not properly inserted, the data will not be read. Keep the floppy disk away from magnets and televisions, for the data on the disk can be damaged by magnetism. Press the eject button to take out the floppy disk. Do not eject the disk - Brother International BAS-411 | Instruction Manual - English - Page 28
S F L COMMUNICATE EEDLE SET EDIT 0 THREAD RBMNG x FEED THREAD SENSOR SELEC PATTER • A71, 2 SHIFT 2 aa ee a 2• e ONE STITCH 404M RESTART brother BAS -411 C V M _ I o o LI U A A 0 n if) 0 9- 0 l a a o U • a 0 L SPACE c 0• 10) AC BEA BACK MP OR WARD A h ENTER (a7 -24 - Brother International BAS-411 | Instruction Manual - English - Page 29
setting. ▪ • Exit from each menu in the editing mode and to exit from editing mode. 4r4,'1, lr EMERGENCY ENTER Use this key to; • Stop the machine during sewing. • Clear the back-up memory when the power is turned on. Use this key to; • Convert the character code into character. • Set the - Brother International BAS-411 | Instruction Manual - English - Page 30
line. EDIT Use this key to; • Edit after data entry. • Select function out of the editing menu by the numeric key. • In editing mode, BA5-411 can edit only brother data format (block data format). No other data format is available. -26- - Brother International BAS-411 | Instruction Manual - English - Page 31
* Only one hoop feed position can be set per embroidery cycle. The hoop feed position can be changed during sewing. This key is available when the machine is standing by or in suspension. IttEN4R NEEDLE SELECT Use this key to move the needles manually, not related to the needle order. This key is - Brother International BAS-411 | Instruction Manual - English - Page 32
STITCH Use this key to trim manually. This key is available when; • In main menu mode. • Setting sewing start point. • The machine is standing by or suspended. order to restart the machine for the rest of embroidery. [NOTE] When the power is on and the rest of data of last embroidery is stored , the - Brother International BAS-411 | Instruction Manual - English - Page 33
it! 46 Alphanumeric and symbol keys 0 A Use this key to; • Enter number and pattern. F9 • Select menu. IIIUsethis key to; • Enter characters in alphanumeric mode. • Enter 1-8 digit(s) code numbers (file name) in pattern mode. WAS' PATTERN Use this key to switch pattern mode, alphanumeric mode - Brother International BAS-411 | Instruction Manual - English - Page 34
THREAD SENSOR SET • CENTERING CODE NO. pm SPEED Operating procedure, data code number, letters entered, editing data and error messages are shown on the 3-line,15letter display. iTh ft THREAD SENSOR SET • This indicator is lit when the thread breakage detector is working. CENTERING C -y. • - - Brother International BAS-411 | Instruction Manual - English - Page 35
&Mei and functions of keys on operation panel (8) • " tea • a SPEED II H H CONTRAST • 1ft SLOW A gt SPEED The speed dial is used to select one of the 6 sewing speeds, FAST according to the chart below. The levels are set according to the stitch length. (not changeable) '--r-;"-i-g-e------, - Brother International BAS-411 | Instruction Manual - English - Page 36
the following before switching on the machine 1. THREAD 2. EMBROIDERY HOOP 3. NEEDLE THREAD POSITION 0 Threading is proper? e The needle is threaded? © The bobbin thread is set? 0 The needle thread is set? 0 The embroidery hoop securely clamps? 0 The embroidery hoop increases the tension of the - Brother International BAS-411 | Instruction Manual - English - Page 37
A C] When turning on the power of the machine [NOTE] When the needle bar and the pulley are not message shows that the needle bar case is not aligned with the needle hole of the needle plate. The machine cannot operate if this occurs. needle bar case side 1. First of all, check that the needle bar - Brother International BAS-411 | Instruction Manual - English - Page 38
the needle bar in the proper needle bar stop position. 3. Press the key. The X and Y carriages move automatically to the home position of the embroidery area. 4. The main menu is displayed. -34- - Brother International BAS-411 | Instruction Manual - English - Page 39
Y carriages move to an abnormal position after returning to the home position (the center of the embroidery area). 2. After having exchanged the P-ROM on the main printed circuit board of the machine. (The power switch should be off in exchanging.) [Procedures in clearing and and resetting memory - Brother International BAS-411 | Instruction Manual - English - Page 40
is automatically suspended because of needle thread breakage, and so on. 1. Turn on the power. The embroidery hoop is automatically returned to the position where sewing was suspended before and the machine suspends. 2. Pressing the key will start sewing. Pressing the key will cancel - Brother International BAS-411 | Instruction Manual - English - Page 41
(2) In case the power of the machine was cut off because of a power loss (RESTARt or END 1. Turn on the power. The message, "RESTART or END" is displayed. RESTART E ND The embroidery hoop is automatically returned to the position where sewing was suspended before. st.S6N > ST NBN \liSt START - Brother International BAS-411 | Instruction Manual - English - Page 42
the sewing mode. When the main menu is displayed, the following modes can be selected using these keys. [NEEDLE SELECT] 0 The needle can be replaced manually regardless of the setting in the NEEDLE SET mode. Pressing the JOG key will move the hoop position. [NEEDLE SET] Pressing the - Brother International BAS-411 | Instruction Manual - English - Page 43
Ett- *-• 1 4604 i E Fat p. n 1,2 1. When the alphanumeric mode is displayed, the alphanumerics and the symbols can be entered directly from the operation panel. (This mode is used for entering the alphabet from the floppy disk.) This is displayed in default. The available keys on this display - Brother International BAS-411 | Instruction Manual - English - Page 44
3. Changing the style number of the pre-stored letter 1. Move the cursor under the letter to be changed. 2. While the cursor is displayed on the second row by pressing the < QS > key, type the style number and press the key. 3. The style number of the letter on the cursor on the first row - Brother International BAS-411 | Instruction Manual - English - Page 45
alphanumerics and symbols in alphabet mode (3) 4. To type the letters of AB in practice There e are 28 styles available including block letters, script, old English letters, italics in the alphabet (capital and lower case) and numbers. The alphabet and the numbers can be entered directly from the - Brother International BAS-411 | Instruction Manual - English - Page 46
5. Selecting alphabet style Different styles can be selected prior to entering the alphabet (capital and small) and the numbers. Examples of four styles of embroidering A B AB Style 01 Block letters Embroider the letters fa Aiti Style 02 Script Style 03 Old English letters [NOTE] In addition to - Brother International BAS-411 | Instruction Manual - English - Page 47
Entering alphanumerics and syrnbola rn alphabet mode rz, A ADOODEEDLIAFirTL STYL : 0 2 /ALPHE3T, B AB 0000 STYL : O :DO BT E N D 5. Press the key. The message, "Reading now" is displayed in the third row. 6. Press the key. [NOTE 3] At this time, to check the style number of the - Brother International BAS-411 | Instruction Manual - English - Page 48
1. Setting color change The color change can be selected for every letter or pattern by entering the color change code in entry mode. Select the alphabet made or the code mode when setting color change. About a method of entering color change in alphabet mode o'O ( II I;i O0f O C.3 O STY /ALPHBT - Brother International BAS-411 | Instruction Manual - English - Page 49
GL r PATTERN By pressing the key, the code entry mode will be displayed. While this is displayed, it may be used in entering the alphabet by code number from the floppy disc. [NOTE 11 The alphabet should be entered as a two-digit ASCII code. Refer to the ALPHABET 28 TYPES CORRESPONDING - Brother International BAS-411 | Instruction Manual - English - Page 50
Alphanumerics (two digits) The stored alphanumerics and symbols are displayed. [NOTE 1] If the data of the stored letter does not exist in the floppy disk, the letter will be highlighted. The style number of the letter to be entered is displayed. ENTER About [NOTE 1] If the highlighted letter - Brother International BAS-411 | Instruction Manual - English - Page 51
There are 28 styles of the alphabet, including European letters available in the floppy disc included with the machine. Select the style to enter as a two- digit character number code of the alphabet. (Refer to the ALPHABET 28 TYPES CORRESPONDING LIST.) Embroider the letters - Brother International BAS-411 | Instruction Manual - English - Page 52
a E N D "42" is displayed. 6. Press the key. 7. The AB with the style number 01 is stored. 8. Press the key. 9. Return to the main menu. [NOTE 1] Pressing the , and keys are displayed by capital. Pressing the , and keys are displayed by small case. [NOTE 2] If - Brother International BAS-411 | Instruction Manual - English - Page 53
About a method of entering color change in code entry mode 4 1 ENTER 2 A I ENTER 4 2 ENTER E N D 1. Type the character code A, 41, on the key board. 2. Pressthe < ENTER > key. "41"will disappear leaving "A" on the display. 3. To indicate a color change, type the code, 2A, on the key board. "*" is - Brother International BAS-411 | Instruction Manual - English - Page 54
Letters can be changed after entering the character code. When having entered the character code number of A, not "41", but "44" by mistake C or AC 1. Press the key or the key. "43" disappears. 4 1 ENTER 2. Press the character code of the A, 41 correctly. "41" is displayed. 3. - Brother International BAS-411 | Instruction Manual - English - Page 55
4 3 ENTER lAtP E N D 3. Press the character code C, 43. "43" is displayed. 4. Press the key. "43" is disappeared, and the display has been corrected to 5. Press the key. The main menu will be displayed. -51- - Brother International BAS-411 | Instruction Manual - English - Page 56
Entering the arrows will shift the letters stored 1 mm each in the direction of the arrow. Changing the enlargement and reduction ratio can also change the letter positions up to 9.9 mm per arrow. To shift the letters more than 9.9 mm, simply enter multiple arrows and change the ratio as required. - Brother International BAS-411 | Instruction Manual - English - Page 57
'frAT - 2if;A=1, Pressing the key in turn will alternate the modes : the alphanumeric mode, the code mode and the pattern mode. Select the pattern mode by pressing the key. El gt oD a in CI Only In this mode can the pattern data be entered from the floppy disk. A pattern is - Brother International BAS-411 | Instruction Manual - English - Page 58
When the data is a pattern, the mark "*" is displayed for each pattern. (The pattern cannot be distinguished by "*".) [NOTE] When the pattern is in the floppy disk, pressing the key increases the number of "*"s by one on the first row to show the pattern entry is completed. The file name - Brother International BAS-411 | Instruction Manual - English - Page 59
R.4 When sewing the file name "S A K U R A": MU. TArtfiS4 ENTER " e 1. Press the key. PATTERN 00 t A S A K 2. The display will indicate the alphabet mode. Press the key twice to get into the pattern mode. 3. Enter the file name "S A K U R A". R A Fa ENTER E N D 4. The file - Brother International BAS-411 | Instruction Manual - English - Page 60
or above. The pause setting within the pattern When changing the color of a part of the pattern, automatic pause setting can be done. This should be done volume patterns or files will not be read into the machine. This machine cannot manage multi-volume file (one pattern's data that separates into more than - Brother International BAS-411 | Instruction Manual - English - Page 61
L- When embroidering a pattern of a large number of stitches, the memory capacity inside the BAS-411 may not be large enough. If [NOTE 1] This method that is the case, do the following to embroider. is valid only with the TFDs (Taj i - Brother International BAS-411 | Instruction Manual - English - Page 62
disk (Hereafter TFD.). The Brother-format letter and design floppy disks cannot be used. A pattern in the multi-volume file (one pattern's data that separates into more than one volume) cannot be read. [NOTE 3] Be sure to leave the floppy disk in the disk unit of BAS-411 during sewing. If the disk - Brother International BAS-411 | Instruction Manual - English - Page 63
screen • to check the settings in the editing menu • to select the "Needle bar setting mode" - to select the needle bar manually • to switch ON/OFF of the detector and to set the bobbin thread counter • to return to the main menu -59- - Brother International BAS-411 | Instruction Manual - English - Page 64
1. Enlargement/Reduction mode (1) Function: Setting the embroidery size by enlarging and reducing (2) Available keys: • < 1> to select "Ratio" • to select "Length" • to select "Auto" • to return to the editing menu 1-1. Ratio s % I (1) Function: - Brother International BAS-411 | Instruction Manual - English - Page 65
(1) Function: Setting the monogram area using the jog keys (2) Available keys: T > < y > • to move the carriage to confirm the carriage location • to return to the editing menu 3. Sewing density and letter thickness setting mode (1) Function: Setting sewing density and letter - Brother International BAS-411 | Instruction Manual - English - Page 66
point (2) Available keys: ENTER> • < CLEAR END> iy to move the carriage to confirm the carriage location to set the default value (Center of the area: X = 225 mm, Y = 142 mm) to select "Manual" or "Auto" to return to the editing menu 7. Rotation mode 04, (1) Function: Setting the rotation - Brother International BAS-411 | Instruction Manual - English - Page 67
10. Automatic jump setting mode (1) Function: Setting the automatic jump (2) Available keys: • < 1> to select "12.7 mm" • to select "4.8 mm" • to return to the editing menu 11. Material thickness indication mode 4a, ii (1) Function: Indicating the material thickness (2) Available keys: • - Brother International BAS-411 | Instruction Manual - English - Page 68
14. Boring mode (1) Function: Setting the boring sewing (2) Available keys: .< T > to select "YES" •< > to select "NO" • < ENTER> to confirm the inputted value and to switch over "Boring" and "SHIFT" • < CLEAR> to set the default value • to return to the editing menu 15. Stitch - Brother International BAS-411 | Instruction Manual - English - Page 69
. ED IT C6R [4) 511 (+) Press the key. The machine will enter the editing mode. The 8 items of the editing menu are 1.0 4. Arrangement: horizontal arrangement 5. Mirror image: 6. Hoop feed: "1" (non-reversed mirror image) center of the moving area of the X andY carriages (coordinates: 225 - Brother International BAS-411 | Instruction Manual - English - Page 70
Alphabet and Kanji floppy disks Data supplied by Brother TFD pattern floppy disk Brother design floppy disk Data in paper tape Data Within 030-2.00 is enough [NOTE] Within 0.50-5.00 is to get fine embroidery. enough to get fine When reducing both height and Editing embroidery_ width to LI - Brother International BAS-411 | Instruction Manual - English - Page 71
Editing function The monogram can be enlarged or reduced within the set area. Enlargement and reduction can be set in three ways: [Ratio] , [Length] and [Auto]. Press the key when the editing menu is displayed. 1 Ratio' *Auto The setting items of enlargement and reduction are displayed. - Brother International BAS-411 | Instruction Manual - English - Page 72
2. The cursor appears in the width ratio type area. [NOTE] In default, the width "1.00" and the height "1.00" are displayed. When a different ratio has already been set, that ratio wil l be displayed. The key switches over [ALL] and [EACH]. Function . 7 To type ratio Ratio can be set in - Brother International BAS-411 | Instruction Manual - English - Page 73
>Height Modified letter (Long narrow) A (Standard) (Flat) [NOTE1] Different letters have different sizes even if the same ratio is set. [NOTE2] The machine does not sew the letters if the set ratio makes the letters larger than the set sewing area. A-2 Setting size ratio individually (1) The - Brother International BAS-411 | Instruction Manual - English - Page 74
The key switches over [ALL] and [EACH]. ° ff r 1, To type ratio Function Ratio can be set in 0.01 increments b within 0.10-9.99. To move cursor § To store typed ratio E To switch type area (width - Brother International BAS-411 | Instruction Manual - English - Page 75
] To change the ratio for the letter where the cursor appears, press the key to display "1.00", then re-enter the ratio. (NOTE31 The machine does not sew the letters if the set ratio makes the letters larger than the set sewing area. -71- - Brother International BAS-411 | Instruction Manual - English - Page 76
A-3 Setting size ratio individually (2) Inserting and deleting letter data Size ratio is not applied to a letter itself, but to a position in the display. Because of this, changing the size ratio, sewing and then adding or deleting letters causes letter sizes to change as shown below. Ex. 1 Cr B P - Brother International BAS-411 | Instruction Manual - English - Page 77
1 0.:VI4I-7;4',74-:4't .1tIKIANII. Ex. 2 GS 1f 11 b1»tQd 48T.,,7 [1st letter] A pt Ir7 1 5l Et [2nd letter] C [3rd letter] B A C .07 B Letter width Letter height Letter width Letter height Letter width Letter height 0.60 1.00 2.00 1.50 1.00 1.00 [Ratio for 1st letter] [Ratio for 2nd - Brother International BAS-411 | Instruction Manual - English - Page 78
1 B. Setting total length The total length (width and height) can be set in 1 mm increments for enlargement and reduction. 2 '9 ti rt 1. Press the key to select [Length]. 2. The cursor appears in the height type area. Note that the current total length is displayed in three digits. , ' /1 . - Brother International BAS-411 | Instruction Manual - English - Page 79
menu will be displayed again. l Upper left origin E E E E 0 AB to .c Yr °E I- A-I l Total width 40 mm I .4_L -6-Lower I• ..-I right Area width 50 mm point [NOTE1] The machine does not sew the letters if the set ratio makes the letters larger than the set sewing area. -75- - Brother International BAS-411 | Instruction Manual - English - Page 80
[NOTE2] When setting the total length after rotating the monogram (except 0°, 90°, 180°, and 270°), the total length might not be calculated precisely, resulting in a pattern too large for the area. To set the total length of the finishing monogram, be sure to set the total length before rotation. - Brother International BAS-411 | Instruction Manual - English - Page 81
C. Automatic calculation Letter size can be automatically calculated and sewn to fit the area size. 1. Press the key to select [Auto]. 3 The ratios for the total width and height are set to the maximum so that both of them fit in the set area. 2. After the automatic calculation is completed, - Brother International BAS-411 | Instruction Manual - English - Page 82
To store upper left origin and lower right point To return to editing menu without changing value [NOTE1] Set the area within the attached embroidery hoop. [NOTE2] The size and position of monogram letters depends on the area size. 1. Press the key to select [AREA]. 4- 2. By using the jog - Brother International BAS-411 | Instruction Manual - English - Page 83
the jog keys, move the needle position towards the lower right within the embroidery hoop to determine the lower right point. ENTER D P3 While moving the in height and 450 mm in width. Setting the area larger than the embroidery hoop causes the needle to strike the hoop during sewing. Be sure to - Brother International BAS-411 | Instruction Manual - English - Page 84
The sewing density can be set in 0.1 increments within 0.1-2.0, and the letter thickness can be set within 0.62.0. 1. Press the key to select [DNS]. 3 Function To type sewing density and letter 4 thickness ratios To store typed value To switch type area (densitythickness) Cursor moves to - Brother International BAS-411 | Instruction Manual - English - Page 85
Setting sewing density A. Setting sewing density a 3 tetcter thickness The sewing density ratio can be set within 0.1-2.0. 1_ Press the key to select [DNS]. 2. The current sewing density and letter thickness ratios are displayed. [NOTE1] In default, "1.0" appears. [NOTE2] When the sewing - Brother International BAS-411 | Instruction Manual - English - Page 86
B. Setting letter thickness 3 ENTER tt9f ckness 3) The letter thickness ratio can be set within 0.6-2.0. 1. Press the key to select [DNSI. 2. Press the < ENTER> key to move the cursor to the letter thickness type area. [NOTE1] In default, "1.0" appears. [NOTE2] When the letter thickness ratio - Brother International BAS-411 | Instruction Manual - English - Page 87
Letters, symbols and patterns can be arranged vertically or horizontally or on a curved line. By inserting a return code between characters (patterns) in the entry mode, arrangement on the several lines (both vertical and horizontal) can be made. Also, by inserting a return code between characters ( - Brother International BAS-411 | Instruction Manual - English - Page 88
When horizontal arrangement data includes return code: Set value in the editing: 1) Centering E 2) Ratio is set by each character or pattern 1. Press the key to select "H-*." 1 E N D 2. Using the (alphabet) key, select the arrangement type. The symbols for each arrangement type ( 16 , c0n - Brother International BAS-411 | Instruction Manual - English - Page 89
II When vertical arrangement data includes return code: Set value in the editing: 1) Centering LI 2) Ratio is set by each character or pattern 2 E N D 1. Press the key to select "V ,L." 2. Using the (alphabet) key, select the arrangement type. The symbols for each arrangement type ( cfl - Brother International BAS-411 | Instruction Manual - English - Page 90
When arrangement data only includes characters (patterns) : Set value in the editing: 1) Centering H 2) Ratio is set by each character or pattern EDIT 1. Press the key to select " C " Number key 2. Press one of the to keys to select base line. In this example, is selected. 3. - Brother International BAS-411 | Instruction Manual - English - Page 91
arrangement type= Ell character (pattern) orientation = A B 91/14.40 V ik !:6 arrangement type= a character (pattern) orientation = V a -. .--.' fre 4144CS. arrangement type= cDP character (pattern) orientation = Dv arrangement type - Brother International BAS-411 | Instruction Manual - English - Page 92
return codes, each group of characters (patterns) can be arranged on the different base lines. Ex. 4 explains how to create an embroidery like the illustration below. ?k% fry -k' IV %A\ 04 k',tV I t6S11 ti#-: 49 40, etiabe D E F When curved arrangement data includes return code: Set - Brother International BAS-411 | Instruction Manual - English - Page 93
step 4. 7. Press the (alphabet) key to select the base point location. The base point location symbols ( IC - I];] • - are selected cyclically by pressing the a solid line. [NOTE 2] If the key is pressed here, the machine will trace the base line. At this time, the base point comes to - Brother International BAS-411 | Instruction Manual - English - Page 94
the key. 11. Press the (alphabet) key to select the base point location. The base point location symbols ( O -El • • - are selected cyclically by pressing the key. NOTE 2] If the key is pressed here, the machine will trace the base line. If the hoop and the holder base were not moved at - Brother International BAS-411 | Instruction Manual - English - Page 95
the key. 15. Press the (alphabet) key to select the base point location. The base point location symbols ( - D • • - are selected cyclically by pressing the key. [NOTE 2] If the key is pressed here, the machine will trace the base line. If the hoop and the holder base were not moved at - Brother International BAS-411 | Instruction Manual - English - Page 96
E N D) 17. Press the key twice to exit from the current mode. E N D is [NOTE 1] [NOTE 2] If there is character (pattern) data on the curved line (see ex.4 on page 88), rotation angle can be changed only by 90 degrees increment. If there is character (pattern) data on the be set. Also, - Brother International BAS-411 | Instruction Manual - English - Page 97
4 A ging ty) - Brother International BAS-411 | Instruction Manual - English - Page 98
• , • To arrange the characters (patterns) on the straight line (2 points entered): second point 2 ) (+1 ti ENTER [AC 4 Iii 1 ENTER first point 1. To register a line in the underlined number, press the numeric key of that number. In this example, the number "1" is underlined, so press the - Brother International BAS-411 | Instruction Manual - English - Page 99
trace the line between the two points. C [NOTE 2] if the key is pressed here, the previously entered two points will be cancelled and the machine goes back to step 1. (Press this key when you want to re-enter the line.) Go to step 1. Cti Trace> Reset E N D 4. Press the < END> key - Brother International BAS-411 | Instruction Manual - English - Page 100
To arrange the characters (patterns) on the arc (3 points entered): second point first point third point ° ;.$ 2 1. To register a line under the desired number, press the numeric key of that number. For example, if you wish to register under the number "2", press the key. 2. At this point, - Brother International BAS-411 | Instruction Manual - English - Page 101
No. "2" will be indicated with a positive number, indicating that the registration is complete. [NOTE 1] [NOTE 2] If the key is pressed here, the machine will trace the arc connecting the three points. If the key is pressed here, the previously entered three points will be cancelled - Brother International BAS-411 | Instruction Manual - English - Page 102
E N D 6. Press the key twice to exit from the current mode. This is the end of the line registration procedure. E N D Eq1 -98- - Brother International BAS-411 | Instruction Manual - English - Page 103
To arrange the characters (patterns) on the spline: B C Xth point last point second point first point a 2 1. To register a line under the desired number, press the numeric key of that number. For example, if you wish to register under the number "2", press the key. 2. At this point, another - Brother International BAS-411 | Instruction Manual - English - Page 104
Curve No. "2" will be indicated with a positive number, indicating that the registration is complete. [NOTE 1] If the key is pressed here, the machine will trace the spline connecting entered points. [NOTE 2] If the key is pressed here, the previously entered points will be cancelled - Brother International BAS-411 | Instruction Manual - English - Page 105
04)86(7) eset>C E N D 6. Press the key twice to exit from the current mode. This is the end of the lineregistration procedure. E N D -101- - Brother International BAS-411 | Instruction Manual - English - Page 106
Three kinds of mirror image processes--of X axis symmetry, Y axis symmetry and origin symmetry--can be set. Number key 1. Press the key to select [MRli]. Tal IT1 2. Press one of the , , and keys to select the number. 3. After the number is selected, the editing menu appears. - Brother International BAS-411 | Instruction Manual - English - Page 107
easily attached or removed to make an operation such as material attachment smooth while the machine suspends. NLR A£ ARRAS { E 6 H . O, .Svi/Elit,' • point To store coordinates To return to editing menu To select AUTO or MANUAL for hoop feed at sewing end Example: 4-- 450 hoop feed point - Brother International BAS-411 | Instruction Manual - English - Page 108
The hoop feed point can be set outside the area. 450 r 1 x (hoop feed point) 285 IL J set area 1. If starting sewing with the hoop feed point set outside the area, "Area over" appears. In that case, using the jog keys, move the needle to the sewing start point in the area. 2. "Mov N STR - Brother International BAS-411 | Instruction Manual - English - Page 109
7 Letters, symbols and patterns can be rotated together counterclockwise in 1° increments. Net (Rotation angle) 7 R ENTER E N WS-:2A,REA A R f. DNS 1. Press the key to select [ROTAT]. 2. Press the numeric key to set the rotation angle. The angle can be set between 00-359°. 3. After the - Brother International BAS-411 | Instruction Manual - English - Page 110
piece of the combination is sewn properly, but the position between them slips. Setting the individual ratios for the arrows to O.00 prevents this problem to some extent. o,e,e i) For example, when entering and ® as the pattern with the arrows, the display shows: Setting the rotation angle to 000 - Brother International BAS-411 | Instruction Manual - English - Page 111
The aligned letters can be centered. ARRAN tR( OTAT, , A D N. 8 1. Press the key to select [CENT]. 2. Then the editing menu appears. 1 9 Function Select the centering point of a monogram or letter (See the figure below.) (• ° AREA: P 5 R7 HOP A Sewing start points (Numbers - Brother International BAS-411 | Instruction Manual - English - Page 112
Sewing start point When monogram data includes arrow: Set value in the editing: 1. Horizontal arrangement 2. Individual size ratio for it is 9.00. centerIng A -A centering -108- - Brother International BAS-411 | Instruction Manual - English - Page 113
ar . 21 When monogram data includes arrow: A;AII ' Set value in the editing: 1. Vertical arrangement 2. Individual size ratio for is 9.00. centering u A centering -109- - Brother International BAS-411 | Instruction Manual - English - Page 114
X When monogram data includes arrows: Set value in the editing: 1. Horizontal arrangement 2. Individual size ratios for both I and j, are 9.00. A,A\\ V A centering Ei centering Ex. 4 When rotating data in Ex. 1 for 30 degrees - Brother International BAS-411 | Instruction Manual - English - Page 115
• d-6 • When monogram data includes arrow: Set value in the editing: 1. Horizontal arrangement 2. Individual size ratios for both J, and ‹- are 9.00. A centering L V centering When monogram data includes arrow: Set value in - Brother International BAS-411 | Instruction Manual - English - Page 116
When monogram data includes return code: centering n centering E] centering u Set value in the editing: 1. Horizontal arrangement 1 Size ratios for all letters are the same. 2 AB C D E When monogram data includes return code: ova Set value in the editing: 1. Horizontal arrangement 2. Size ratios - Brother International BAS-411 | Instruction Manual - English - Page 117
• • (7) 100 When monogram data includes return code: Set value in the editing: 1. Horizontal arrangement 2. Size ratios for all letters are the same. A B C D E centering u centering 3 centering X; When monogram data includes return code: n centering Set value in the editing: 1. Vertical - Brother International BAS-411 | Instruction Manual - English - Page 118
When monogram data includes return code: centering E Set value in the editing: 1. Vertical arrangement 2. Size ratios for al l letters are the same. E ► A' .v es When monogram data includes return code: centering E3 centering H centering Set value in the editing: 1. Vertical arrangement 2. - Brother International BAS-411 | Instruction Manual - English - Page 119
When arranging monogram data: A B Set value in the editing: 1. Arranging on the curved line [ALL] 2. Size ratios for all letters are the same. centering u common for ❑E❑ character arrangement type a starting point ending point centering E common for LIED character arrangementtype cji starting - Brother International BAS-411 | Instruction Manual - English - Page 120
ss When arranging monogram data: Set value in the editing: 1. Arranging on the curved line [ALL] 2. Size ratios for all letters are the same. centering Li common for character arrangement type a starting point centering common for O1O character arrangement type ) starting point starting point - Brother International BAS-411 | Instruction Manual - English - Page 121
When arranging monogram data: Set value in the editing: 1. Arranging on the curved line [ALL] 2. Size ratios for all letters are the same. centering Ej common for Lai character arrangementtype rfib starting point centering common for LiEn character arrangementtype starting point starting point - Brother International BAS-411 | Instruction Manual - English - Page 122
When arranging monogram data: centering Set value in the editing: 1. Arranging on the curved line [EACH] 2. Size ratios for all letters are the same. centering N I - -- centering centering centering El centering centering El centering E centering -118- - Brother International BAS-411 | Instruction Manual - English - Page 123
rnm A monogram can be sewn repeatedly, horizontally or vertically. AkR ROTA 1. When the first screen in the editing menu is displayed, press the key to display the second screen. T1 1 E N D it T 2. Press the key to select (RePT]. 3. In default, the direction is horizontal and the repeat - Brother International BAS-411 | Instruction Manual - English - Page 124
A monogram can be sewn repeatedly, horizontally or vertically. < Exercise 1 > Setthe vertical repeat sewing to 2 times for the letters ABC and put a 5 mm space between them. ABC 1 5 mm ABC TAT [ 4) 1. After entering the data, select [EDIT]. 2. Press the key to display the second screen in - Brother International BAS-411 | Instruction Manual - English - Page 125
RePT: V di SRC: ,000 mm VOEIOmrn k T Orrfrn 5 I ENTER 6. Press the key, and then the key to set the space. RePT:V direr SPC: 005 mm G: [ 311Im H E N D R T THK 0)ATHC ° i STR~R BORING (7) STITCH E N D ( (ENTER} bit tcoMmuNitA. \.[START(Sevvin [NOTE] The total size of the - Brother International BAS-411 | Instruction Manual - English - Page 126
Set the horizontal repeat sewing to 2 times for the letters ABC and put a 5 mm space between them. AB C,n,AB C [4) 1. After entering the data, select [EDIT]. fr 2. Press the key to display the second screen in the editing menu. 1 3. Press the key to select [RePT]. [4) 4. - Brother International BAS-411 | Instruction Manual - English - Page 127
sewing. • When the key is pressed, the machine cancels the second sewing and gets ready for the third sewing. When the key is pressed, the machine cancels both the second and third sewing, and gets ready for the first sewing - Brother International BAS-411 | Instruction Manual - English - Page 128
Sewing start point with the repeat sewing < Ex. 1> 1. Horizontal (Centering: E ) Patten Second sewing N Sewing direction Sewing start point Third sewing 2. Horizontal (Centering: EI ) Patten N Second sewing • Sewing direction Sewing start point Third sewing -124- - Brother International BAS-411 | Instruction Manual - English - Page 129
Setting repeat sew ng e spC :0 G: V13O 1. Vertical (Centering: 0 ) • O '47+ 0 CO Sewing start point Patten Second sewing 2. Vertical (Centering: rj ) Sewing start point 0 0 't3 0) Third sewing Patten Second sewing Third sewing [NOTE] Pressing the key then the key returns - Brother International BAS-411 | Instruction Manual - English - Page 130
S.Iting Anitornatic Jump The automatic jump functions when the data includes stitches longer than the set stitch length. By this function, the machine continues to sew at the set speed_ 1. Press the < > key to display the second screen of the editing menu. IN, 2 2. Press the key to select [ - Brother International BAS-411 | Instruction Manual - English - Page 131
, broadcloth, tricot fabric, cuprammonium rayon (cu pro), gingham 2. When sewing thin material, a pi ece of non-woven fabric or paper attached to the back for support will improve embroidery quality. -127- - Brother International BAS-411 | Instruction Manual - English - Page 132
the successive number of jump stitches in the pattern data. (This function is not available for the prepared letter data supplied by Brother.) 1. Press the key to select (ATHC). 4 2. Indicate the jump stitch number fixed in the data. 1 2 3 4 I After thread trimming, 8jump stitches I After - Brother International BAS-411 | Instruction Manual - English - Page 133
13 In data reading and sewing mode (with TFD format data only), and when DIP switch 3 is ON (sewing start point is the position of the first stitch) in the editing mode, needle return to the sewing start point can be set. A 1. Press the < > key to get the next editing screen. 141 2. Press the - Brother International BAS-411 | Instruction Manual - English - Page 134
14 I* Boring setting is possible only with the sewing data made for boring. Since the sewing machine does not recognize if the data is for boring or not, please double-check before sewing. Before sewing, attach the boring knife and the needle - Brother International BAS-411 | Instruction Manual - English - Page 135
> key to return to the editing menu. [NOTE 1] If boring data has shift data in it, set the machine to "SHIFT:NO." If boring data does not have shift data in it, set the machine to "SHIFT:YES." In both cases, shifting amount is 15 mm. [NOTE 2] Boring or shifting is only - Brother International BAS-411 | Instruction Manual - English - Page 136
15 'NO 4,11S Only with the brother type letter data, stitches can be set either to Satin or to Tatami_ The range of the Tatami sewing pitch is from 2.0 mm to 9.9 mm. 1. - Brother International BAS-411 | Instruction Manual - English - Page 137
TV SEWING sewing function Calculating now Mov N STR- P. NBN:DOODOODOODO TSt • EJDODE:1 Co: PEI Sewing (function selection) mode Select one of the sewing functions in this menu. Sewing In this mode, sewing may be begun. Suspension An emergency stop results suspension. UD 5 Test sewing mode - Brother International BAS-411 | Instruction Manual - English - Page 138
144 S Press the key to enter the sewing mode. In the main menu 1. Press the key. START START 2. Set the first-needle-drop point (sewing start point) using the jog keys. [NOTE] In this operation, the needle may go out of sewing area. If the start point goes out of sewing area, the - Brother International BAS-411 | Instruction Manual - English - Page 139
C (START Sewing starts Data entered is displayed here. As sewing finishes, the data scrolls to the left. Needle number is displayed here when there is a thread change. Again, data scrolls left. , Av I e key. Function E ERE CY . To suspend sewing and enter suspension mode N - Brother International BAS-411 | Instruction Manual - English - Page 140
/.3 v , , . i c p " Function To enter bobbin thread counter/thread breakage detector mode To cancel sewing and go back to the sewing (function selection) mode. ..? To stop stitch without thread automatically , To change stitching without thread (backward/forward) to 100 stitches at a time - Brother International BAS-411 | Instruction Manual - English - Page 141
key to start test sewing entered data. 0:O O,O ODD 0 2. During test sewing, the entered data scrolls to the left. After test sewing, the machine returns to the sewing (function selection) mode. NEEDLE SET £N ; 0 NaN:E3O TCCN 1. Press the key and - Brother International BAS-411 | Instruction Manual - English - Page 142
NEEDLE ,SELECT, To select any needle bar for sewing and move it to the needle hole on the needle plate. In the sewing (function selection) mode; I N81 1. Press the key and select the needle bar using the numeric key. v44 to Function To type needle - Brother International BAS-411 | Instruction Manual - English - Page 143
HOOP FEED E HOOP FEED , 9 •o ONE STITCH START In the sewing (function selection) mode 1. Press the key to feed hoop. 7F 9≥ 3 R Y@ , 1 0- . J# ,1 44b e .! Function 0 a To move hoop to hoop feed point, set in , 83 hoop feed mode 0 - Brother International BAS-411 | Instruction Manual - English - Page 144
E..1 Sewing A B START 14 / Store the AB. Press the key to return to the main menu. 1. Press the key to start sewing. 2. Set the sewing start point using the jog keys. After the sewing start point setting, these functions are available. Thread breakage detector Thread trimming - Brother International BAS-411 | Instruction Manual - English - Page 145
To confirm the size and position of embroidery before sewing. Ex Test Sewing for A B n 1. Press the key to select test sewing. "AB" is displayed and test sewing begins. The carriage moves along the - Brother International BAS-411 | Instruction Manual - English - Page 146
Press the key to sew the stored letters. Press the key to return to the main menu. Select [EDIT] to edit the stored letters. [NOTE1] In test sewing, only carriage moves, not needles. [NOTE2] Press the key to stop test sewing. Order of test stitches for AB B fAjB rkt At B - Brother International BAS-411 | Instruction Manual - English - Page 147
1.! ra sz Sewing 6-color-pattern that includes 5 color changes (Needle number (1)(a)c)664 are used in this pattern.) Color order Color change Color change 3 Color change Color change A Color change Needle number 5 `NEEDLE \ SELECT, 4 1 er- 1-7)C11: 31:3 3 151 N - Brother International BAS-411 | Instruction Manual - English - Page 148
CCN : 06 TCCN : 06 NBN: al C3ONDifir.JO 0 re; 4. .2-4valL 6.• Continue setting needle bar number corresponding to the color order. E N D 7. After setting, press the < END> key. 'IVIov N STR - P. tql3N: j3 i;14;4_ TK D S9iP6 [NOTE1] Color change is also set in the entry mode using the color - Brother International BAS-411 | Instruction Manual - English - Page 149
switches from set to release and vise versa. :;" E N D 3. Press the key after setting. 4 After the pause setting above, when the sewing is restarted, the machine sews the A then the needle bar changes automatically (color change), then suspends before sewing the B. -145- - Brother International BAS-411 | Instruction Manual - English - Page 150
needle bar case movement when entering the number. The number of the moved needle bar is displayed. 3. Press the key after setting. The machine will return to sewing (function selection) mode. At this time the needle bar will not move. Needle bar number in the display indicates the original - Brother International BAS-411 | Instruction Manual - English - Page 151
Bobbin thread counter: After each completion or cancellation of sewing, the counter number is subtracted. The machine can be set so that a notice will be given if sewing is started after the counter number became 0. The counter number can be set - Brother International BAS-411 | Instruction Manual - English - Page 152
:gt AC A E N B a 5. To clear the stitch counter setting to 0, press the key. Even if the power switch of the sewing machine is turned off, the stitch counter memorizes the previous number and keeps adding the number until the key is pressed. 6. After setting the counter - Brother International BAS-411 | Instruction Manual - English - Page 153
V COMMUNICATION The machine can receive the embroidery data from a paper tape reader or editing system through a communication line. [ENTER] DI [COMMUN 451AR-7 (Sewin Select [COMMUNICATE] in the main menu. COMMUNICATE 1. Press the < - Brother International BAS-411 | Instruction Manual - English - Page 154
to page 156. 3. Press the key to begin. ill E N D 4. After this message is displayed, press the key. 5. The machine returns to the main menu. fi [NOTE] This machine cannot manage a multi-volume file (one pattern's data that separates into more than one volume). If that is the case - Brother International BAS-411 | Instruction Manual - English - Page 155
C) Improper baud rate (refer to the [NOTE 4] on page 156). tteointikiC E ND ENTER (CAUSE) 0 Poor connection between the paper tape reader and the machine. © Paper tape reader is turned off. Communication cable breakage Press the key to clear the messages above. Through the paper tape. Press - Brother International BAS-411 | Instruction Manual - English - Page 156
name (within 8 characters) for reading with the numeric keys. ENTER 3. Press the key to begin. E N D 4. After reading is completed, press the key. 5. The machine returns to the main menu. -152- - Brother International BAS-411 | Instruction Manual - English - Page 157
. re (This message is displayed when the communication does not start while the line between the editing system and the machine is connected. (CAUSE) CD Breakdown in entire editing system (CURE ) C) Reset the editing system to enter communication mode. © Repair the breakdown. E N D ENTER (CAUSE - Brother International BAS-411 | Instruction Manual - English - Page 158
Connect them using RS cable assembly (optional). O Ii 1. Remove the four nylatches 0 and the main PCB cover 0. 2. cut section Connect the connector (either of the two may be used) of the RS cable - Brother International BAS-411 | Instruction Manual - English - Page 159
table below for BAS-411. Do not use other paper tape readers. Others may not interface with BAS-411 or cause trouble. Maker GN Telematic RS cable assembly Code: S15406-001 Set the paper tape reader switches as follows for BAS-411. O Character length 8 bit O Stop bit length O Baud rate 1 bit 9, - Brother International BAS-411 | Instruction Manual - English - Page 160
BAS-411, BROTHER deals in the following paper tape reader as an option. (Contact Brother's shop for details.) maker GN telematic Inc. type GNT27 name GNT27-100V assembly part This set point will be retained until the machine is turned off. Once the machine is turned off, the set point returns to - Brother International BAS-411 | Instruction Manual - English - Page 161
interface (9-pin connecter) (2) Microsoft mouse or equivalent • Use of a math coprocessor will increase the processing speed. • For operation of the editing system, refer to the "Instruction manual for the editing system". -157- - Brother International BAS-411 | Instruction Manual - English - Page 162
VI OTHER The following will occur when enlarging characters and patterns on the BAS-411. Example: If the letter "0" is enlarged 9.99 times in font No. 1, under picking will continue from the first stitch (stitch length approx. 18 mm), but - Brother International BAS-411 | Instruction Manual - English - Page 163
off. Move carriages X exceeds maximum area. and Y to center of area manually, then turn power on again. If same error message is displayed again, reading data, floppy disk Do not remove floppy disk from is removed when machine runs FDD during sewing in this mode. in sewing mode. 3. Damaged - Brother International BAS-411 | Instruction Manual - English - Page 164
ERR **th Memory OVR Area over B. Thread empty Thread breakage Over load g % , e a ° Without sewing data entered, you try to set machine to sewing mode. ? ¢ ° ; .1) . '' . ,, .. ,s ? ' i. ..4„4, First, input sewing data, then start sewing. Improper area setting Re-set area or re-edit - Brother International BAS-411 | Instruction Manual - English - Page 165
it.. .. . „ f ' , . 7, ,, .eF,- ;• ' 0 , , . 'g Can't communi 1. Paper tape reader or editing Link with exclusive cable. system does not connect with machine by cable. 2. Power of paper tape reader or Turn on power. editing system is not turned on. 3. Editing system does not enter Set - Brother International BAS-411 | Instruction Manual - English - Page 166
malfunction, diagnose the problem referring to the table below. If the problem persists, turn off the power and contact your dealer. Problem Check point 1. The ? 1. Is material edge caught in the machine? (Are embroidery hoop and other related parts operating correctly? ) 2. Is material stretched - Brother International BAS-411 | Instruction Manual - English - Page 167
Problem 8. Machine operates incorrectly. 9. Upper shaft is locked at some point of a cycle. ae pis Ss 4'I Check point 1. Is set screv- of rotary encoder loosened? 2. Is set screw of machine it in proper position manually as in the figure bar case inner thread guide thread take-up operating - Brother International BAS-411 | Instruction Manual - English - Page 168
Problem Check point 10. Upper shaft does not turn. 1. Is thread tangled in restart mode, the hoop moves till the hoop is over the area. 14. Thread breakage detector functions and machine stops although thread breakage does not occur. Turn off the power, then turn on the power again while pressing - Brother International BAS-411 | Instruction Manual - English - Page 169
floppy disk cannot be used in BAS-411 even though it can be used in other embroidery machine. When 3.5" 2HD floppy disk was made in 2DD format. When 3.5" 2DD floppy disk was made in 2HD format. If your problem does not come under case (1), (2) or (3), please consult with Brother's shop. -165- - Brother International BAS-411 | Instruction Manual - English - Page 170
1 2 3 -IP- ON \ 4 5 6 SW 7 8 ON At shipping, all switches are set to OFF. oose kJetwqe By switching the DIP switch on, the total length of a pattern or the set sewing area can be specified in inches. Display in inches Example 1 Area Example 2 Total length Example 3 To set and confirm hoop - Brother International BAS-411 | Instruction Manual - English - Page 171
ors L2) laLi • gt,$ tti Example entry When setting the vertical length for 3.5 inches and the horizontal length for 10 inches: Vertical 0 3 15 0 Horizontal 1 0 0 0 Press numeric keys 3 5 I I 0 I IEED Iwo l 0 Press numeric keys Enter degits in order from left to right. [NOTE] In using - Brother International BAS-411 | Instruction Manual - English - Page 172
When the entered data is one pattern, the needle location will be the sewing start point (the first stitch). = OFF If another floppy disk is inserted during data reading or sewing of a pattern (character), machine will stop operation at that point. 6. SW [NOTE] Do not take out the floppy disk from - Brother International BAS-411 | Instruction Manual - English - Page 173
to ty st r [NOTE) The parts indicated by the X symbol in the parts code column are standard parts. 0 Holder base ol• SIP 0 To embroider plain material. le FRAME HOLDER BASE ASSEMBLY 00 X 516128-001 PLASTIC SQUARE FRAME WITH ARMS SPF A-45 x 23 PLASTIC - Brother International BAS-411 | Instruction Manual - English - Page 174
0 Spider net frames 00 0 0 O 0 L The two spider net frames can be set to the frame holder base. When repeat sewing is horizontally performed twice, input "L" mm space. Sewing can be repeatedly performed. (Refer to page 119.) 00 00 O FRAME HOLDER BASE ASSEMBLY 516128-001 O SPIDER NET FRAME - Brother International BAS-411 | Instruction Manual - English - Page 175
Ernbroldery hoop types (3) I Tubular frame OOOO I I /I 0 oco 8 By removing the table plate and using the cylinder bed, embroidery for tubular materials can be done effortlessly. It is convenient when embroidering on sleeves and the body of ready made clothing or on the back - Brother International BAS-411 | Instruction Manual - English - Page 176
El Cap frame device Embroidery for ready made cap can be done finely. ❑s Boring attachment Boring embroidery for blouses and tablecloth can be done beautifully. -172- - Brother International BAS-411 | Instruction Manual - English - Page 177
-hoop types El Name frame 4 NAME FRAME ASSEMLBY S20821-001 HOOP (A) ASSEMBLY 100 x 100 S09843-201 Embroidery of names can be done effortlessly. HOOP (B) ASSEMBLY 65 x 65 S09844-201 HOOP (C) ASSEMBLY 30 x 30 509845-201 HOOP (D) ASSEMBLY 35x65 509846-201 HOOP (E) ASSEMBLY - Brother International BAS-411 | Instruction Manual - English - Page 178
0 ML 651 lamp set (515378-001) o o ❑2 Marking light (521076-000) -174- - Brother International BAS-411 | Instruction Manual - English - Page 179
Memory expansion board (518788-001 /circuit board B439064 assembly) 0 0 Cap frame device (S21069-001) poi \ -175- - Brother International BAS-411 | Instruction Manual - English - Page 180
Paper tape reader (518444-000) III GNT 27 RS cable assembly (S17064-001) RS cable assembly (S15406-001) El Boring attachment (S21061-001) * Various kinds of optional parts are available besides the ones listed here. Contact your dealer for more information. -176- - Brother International BAS-411 | Instruction Manual - English - Page 181
BROTHER INDUSTRIES, LTD. NAGOYA, JAPAN i H-411 192411-00: 1991 06. I Printed .n
SINGLE
HEAD
ELECTRONIC
EMBROIDERY
MACHINE
BAS
-411
INSTRUCTION
MANUAL