Brother International BAS-423A Color Change Potentiometer Replacement - Englis
Brother International BAS-423A Manual
View all Brother International BAS-423A manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BAS-423A manual content summary:
- Brother International BAS-423A | Color Change Potentiometer Replacement - Englis - Page 1
BAS-416A & 423A BES-1210 & 1230 For Technical Assistance Please Call Toll Free 1-877-4BROTHER Changing the color change potentiometer With the power to the machine turned off. Remove the old color change potentiometer by loosening the two outer setscrews of the color change collar. These are the - Brother International BAS-423A | Color Change Potentiometer Replacement - Englis - Page 2
do not install the potentiometer onto the machine. Turn on power to the machine. Press the Needle Select button to display the needle bar selection screen. Turn the color change collar to move the needle bar case to where it is positioned between needles 1 and 2 as illustrated. Turn the shaft of - Brother International BAS-423A | Color Change Potentiometer Replacement - Englis - Page 3
and that the "N" changes to an "O" on the needle bar selection screen that is displayed on the right of the screen. This "O" means that the machine is directly on needle number 2. Check to make sure that the needle the machine is on matches the needle displayed by color changing with the arrow keys
Changing the color change potentiometer
With the power to the machine turned off. Remove the old color change
potentiometer by loosening the
two outer
setscrews of the color change collar.
These are
the ones closest to the potentiometer
. Then slide the color change
potentiometer out of the collar and the machine. You may have to rotate the color
change collar to get to both outer setscrews.
Unplug the old color change potentiometer by following the cable out of the
potentiometer and unplugging from the connector located on the thread tension
connector. You will also need to remove any cable ties or clips to remove the
potentiometer from the machine. Please make a note of their location so that
after installing the new one they go back in the same place.
B
B
A
A
S
S
-
-
4
4
1
1
6
6
A
A
&
&
4
4
2
2
3
3
A
A
B
B
E
E
S
S
-
-
1
1
2
2
1
1
0
0
&
&
1
1
2
2
3
3
0
0
For Technical Assistance Please Call Toll Free
1-877-4BROTHER
Thread tension connector
Potentiometer connector
Potentiometer
Setscrews
Color change collar
Potentiometer