Brother International BE-1201B-AC Knife Adjustments - English
Brother International BE-1201B-AC Manual
 |
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BE-1201B-AC manual content summary:
- Brother International BE-1201B-AC | Knife Adjustments - English - Page 1
knife protruding out from the fixed knife about 1mm. Moving Knife Fixed Knife 1mm If you find that this is not the case with your machine than you will need to adjust the knives. First you will want to check and adjust, if necessary, the fixed knife. The fixed knife should - Brother International BE-1201B-AC | Knife Adjustments - English - Page 2
After you have checked and adjusted, if necessary, the fixed knife. Now we can check the moving knife. The tip of the moving knife should protrude past the edge of the fixed knife 1 mm as illustrated by the photo below. 1mm If you find the moving knife needs to be adjusted. You will need to remove - Brother International BE-1201B-AC | Knife Adjustments - English - Page 3
. Re-tighten your adjustment screws and press the thread-trimming button on the machine and re-check the adjustment. You may have to do this more than cover and the needle plate and your finished. If you find that the machine will still not cut the thread cleanly, you might want to add two knife
-
1 -
2 -
3
 |
 |
1
K
K
n
n
i
i
f
f
e
e
A
A
d
d
j
j
u
u
s
s
t
t
m
m
e
e
n
n
t
t
s
s
–
–
A
A
l
l
l
l
M
M
a
a
c
c
h
h
i
i
n
n
e
e
s
s
For Technical Assistance Please Call Toll Free
1-877-4BROTHER
The first thing you want to check before you go through any adjustments is to see if the knives are
really out of position. You will need to remove the needle plate to look. They should look like the
photo below with the moving knife protruding out from the fixed knife about 1mm.
If you find that this is not the case with your machine than you will need to adjust the knives.
First you will want to check and adjust, if necessary, the fixed knife. The fixed knife should
be pushed all the to the back of the machine so that the screw that attaches it to the machine is
against the front of the slot in the fixed knife and the right hand side of the fixed knife is
against the positioning pin as illustrated by the picture below. If it is not then loosen the
attaching screw and make the necessary adjustments.
Moving Knife
Fixed Knife
1mm
Attaching Screw
Slot
Positioning Pin