Brother International BE-1201B-AC Main Board Replacement - English
Brother International BE-1201B-AC Manual
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BE-1201B-AC manual content summary:
- Brother International BE-1201B-AC | Main Board Replacement - English - Page 1
Technical Reference Title: Date: Models: Replacing Main Board February 25, 2009 BE-901, BE-901-PC, BE-1201, BE-1201-PC, BES-916, BES-1216 1. Make sure machine is OFF and Unplugged. 2. Remove cover assy. (Six screws removed "A", Three loosened "B") A B A A A A A 3. Identifying Main Bord. ( - Brother International BE-1201B-AC | Main Board Replacement - English - Page 2
or have jumper: P5 & P25-have a jumper, P1, P3, P4, P6, P8, P10, P11 and P13-Not used: marked with asterisk *. * *** * * * * * * 5. Unplug all connectores to remove board. However, keep in mind that connectors only go in one spot and can not be confused. 6. - Brother International BE-1201B-AC | Main Board Replacement - English - Page 3
(Fig. 1-1) Six connectors total hold board down. Clip Locations 3 - Brother International BE-1201B-AC | Main Board Replacement - English - Page 4
P-25 and P-5. 1. If the new board does not have them please use the ones from old board; this will be OK. B. P-ROM = 1. If the new board does not have P-ROM please use the one from old board; it will be OK. P-Rom Replacement: 1) BES 960 MT - Brother International BE-1201B-AC | Main Board Replacement - English - Page 5
U-shape cut out to the socket mount. 8. Installing board, please follow reverse instructions on removal. 9. After board is installed and all plugged in you will need to perform a version up-grade in accordance with the model of machine. The machine will act like it is in-operative until this step is
1
Technical Reference
Title:
Replacing Main Board
Date:
February 25, 2009
Models:
BE-901, BE-901-PC, BE-1201, BE-1201-PC, BES-916, BES-1216
1. Make sure machine is OFF and Unplugged.
2. Remove cover assy.
(Six screws removed
“A”
, Three loosened
“B”
)
3. Identifying Main Bord. (Also: Power Supply, and Head Board)
A
A
A
A
A
A
B
Power Supply
Main Board
Head Board
Main Board
Head Board
Power Supply