Brother International BE-1201B-AC Color Change Potentiometer Replacement - Eng
Brother International BE-1201B-AC Manual
 |
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BE-1201B-AC manual content summary:
- Brother International BE-1201B-AC | Color Change Potentiometer Replacement - Eng - Page 1
Technical Reference Title: Date: Models: Color Change Potentiometer Replacement for SA style machines March 3, 2009 BES-916, BES-1216, BE-0901 & BE-1201 With power to the machine off, turn color change knob until machine is on needle number one and the flag on the motor gear is sticking straight - Brother International BE-1201B-AC | Color Change Potentiometer Replacement - Eng - Page 2
Mounting Bracket Plug the new color change potentiometer into the connector but do not connect mechanically to the machine. Press and hold the up arrow, on the panel while turning on the machine. Continue to hold up arrow down until a menu is displayed asking you to confirm going into test mode - Brother International BE-1201B-AC | Color Change Potentiometer Replacement - Eng - Page 3
or gear of the color change assembly being careful not to turn the shaft while doing it. After you get the potentiometer in place, the machine should still be beeping and 19 displayed on the panel. If not, then turn shaft of potentiometer until it comes back. Tighten the two outer
-
1 -
2 -
3
 |
 |
1
Technical Reference
Title:
Color Change Potentiometer Replacement for SA style machines
Date:
March 3, 2009
Models:
BES-916, BES-1216, BE-0901 & BE-1201
With power to the machine off, turn color change knob until machine is on needle number one and
the flag on the motor gear is sticking straight up. The flag will be underneath the color change
assembly cover and can best be viewed with a flashlight aiming at approximately 45 degrees into the
color change assembly at about the height of the take-up levers from the right hand side of the
machine.
Remove the old color change potentiometer by loosening the
two outer
setscrews,
the ones closest to
the potentiometer
, that hold the color change potentiometer to the gear or knob, depending on
whether you have a 9 or 12 needle machine, and slide the color change potentiometer out.
Setscrews
Setscrews
Color Change Knob
Color Change Potentiometer
Color Change Potentiometer
Color Change Gear
12 Needle Machine
9 Needle Machine
Color change
Fla
g
9 Needle
12 Needle
Fla
g
Color change
gear