Brother International DCP 165C Quick Setup Guide - English

Turn the sheet over.

LS6374001

USA/CAN

Printed in China

Before you can use the machine, read this Quick Setup Guide

for the correct setup and installation.

Quick Setup Guide

DCP

-

165C

Important

DO NOT

connect the

USB cable yet.

a.

The LCD shows:

No Cartridge

b.

Open the ink cartridge cover

a

.

3

Install the ink cartridges

4

d.

Unpack the ink cartridge.

Turn the green knob on the protective yellow cap clockwise until it clicks to release the

vacuum seal, then remove the cap

a

.

If all lines are clear and visible, press

o

a

(

Yes

) to finish the quality check.

If you can see missing short lines, press

o

b

(

No

) and follow the steps on the LCD.

Connect the power cord

Set the LCD contrast (If needed)

7

5

Check the print quality

c.

Remove the green protective

part

a

.

a.

When the preparation process

has finished, the LCD shows

this message.

Set Paper and

Press Start

Press

Color Start

.

OK

Poor

Set the date and time

8

a.

Press

Menu

.

b.

Press

a

or

b

to choose

0.Initial Setup

, and then

press

OK

.

c.

Press

a

or

b

to choose

2.LCD Contrast

, and then

press

OK

.

d.

Press

a

or

b

to choose

Dark

or

Light

.

e.

Press

OK

and then

Stop/Exit

.

a.

Press

Menu

.

b.

Press

a

or

b

to choose

0.Initial Setup

, and then press

OK

.

c.

Press

a

or

b

to choose

1.Date&Time

, and then press

OK

.

6

Set the language (If needed)

b.

Check the quality of the four color

blocks

a

on the sheet.

(black/yellow/cyan/magenta)

d.

Press

a

or

b

repeatedly to enter the last two digits of the year, and

then press

OK

.

Year:2008

(e.g. Enter 08 for 2008.)

e.

Repeat for Month and Day, and Hours and Minutes in 24-hour format.

f.

Press

Stop/Exit

.

Note

If you make a mistake and want to start again,

press

Stop/Exit

to go back to step

a

.

a.

Press

Menu

.

b.

Press

a

or

b

to choose

0.Initial Setup

, and then

press

OK

.

c.

Press

a

or

b

to choose

0.Local Language

, and then

press

OK

.

d.

Press

a

or

b

to choose your language.

e.

Press

OK

and then

Stop/Exit

.

WARNING

Warnings tell you what to do to

prevent possible personal injury.

Note

The components of your box may differ depending on your

•

country.

Save all packing materials and the box in case for any

•

reason you must ship your machine.

A USB cable is not included.

•

You need to purchase a USB 2.0 cable that is no more

than 6 feet (2 meters) long.

Your machine has a USB 2.0 Full-speed interface. This interface

is compatible with USB 2.0 Hi-Speed; however, the maximum

data transfer rate will be 12 Mbits/s. The machine can also be

connected to a computer that has a USB 1.1 interface.

Important

DO NOT connect the

USB cable yet.

Note

The control panel

warning LED will stay on

until you have installed

the ink cartridges.

f.

Gently push the ink cartridge until it clicks. After all the

ink cartridges are installed close the ink cartridge cover.

Note

The machine will prepare the ink tube system for printing.

This process will take approximately four minutes.

Do not turn off the machine.

Start Here

Unpack the machine and check the components

a.

Remove the protective

tape and film.

b.

Remove the plastic bag

a

containing the ink cartridges

from on top of the paper tray.

c.

Make sure you have all components.

1

Starter Ink

Cartridges [x4]

Black

Yellow

Cyan

Magenta

Accessory

Order Form

CD-ROM

Quick Setup

Guide

User’s Guide

Plastic bags are used in the packaging of your

machine. To avoid danger of suffocation, please

keep these bags away from babies and children.

WARNING

1

2

Load plain Letter/A4 paper

a.

Pull out the paper tray.

b.

Lift the paper tray cover

a

.

c.

Press and slide the

paper side guides

a

and paper length

guide

b

to fit the

paper size.

Make sure that the

triangular marks

c

on the paper side

guides

a

and paper

length guide

b

line

up with the mark for

the paper size you

are using.

Important

Do not push the paper

in too far.

d.

Fan the stack of paper well.

e.

Gently put the paper into the paper tray. Check that the

paper is flat in the tray.

Note

When you use Legal size paper, press and hold the

universal guide release button

a

as you slide out the

front of the paper tray.

1

f.

Gently adjust the paper side guides to the paper with both hands.

Make sure the paper side guides touch the edges of the paper.

a.

Connect the power cord.

e.

Install each ink cartridge in the direction of the arrow on

the label. Take care to match the color of the lever

a

with the cartridge color

b

.

g.

Close the paper tray cover

and

slowly

push the paper

tray back into the machine.

h.

Pull out the paper support

a

until it clicks, and then unfold

the paper support flap

b

.

1

1

2

1

3

2

3

1

1

2

1

1

1

Brother International DCP 165C Quick Setup Guide - English

Brother International DCP 165C - Color Inkjet - All-in-One Manual

Brother International DCP 165C manual content summary: