Brother International DreamWeaver„ VQ3000 Users Manual - English
Brother International DreamWeaver„ VQ3000 Manual
View all Brother International DreamWeaver„ VQ3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International DreamWeaver„ VQ3000 manual content summary:
- Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 1
Operation Manual Sewing Machine Product Code: 882-D00 Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference. - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 2
(including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on Corporation. Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 3
Please read these safety instructions before attempting to use the machine. DANGER - To reduce the risk of electrical shock 1 Always unplug the machine from the electrical outlet immediately after using, when cleaning, making any user servicing adjustments mentioned in this manual, or if you are - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 4
and follow careful instruction when free troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother dealer. Use this machine only for its intended use as described in the manual. Use - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 5
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 6
(908) 704-1700 declares that the product Product Name: Model Number: Brother Sewing Machine VQ3000 This device complies with Part 15 of the FCC Rules. Operation is generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 7
INSTRUCTIONS Laser Notices (For U.S.A. only) Laser Safety This sewing machine is certified as a Class 1 laser product under the U.S. Department of Health and Human Services marketed in the United States. Brother Industries, Ltd. 15-1, Naeshiro- Use of controls, adjustments or the performance - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 8
IMPORTANT SAFETY INSTRUCTIONS Laser Notices (For countries except U.S.A.) IEC 60825-1 Specification This sewing machine is a the Laser Unit. The Laser Unit should not be opened under any circumstances. • Use of controls, adjustments or the performance of procedures other than those specified in this - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 9
OUTSTANDING FEATURES Setting Laser Guideline Marker as a Guide to Sew Expanding Your Creativity with Dual Feed position, the width and "L/R SHIFT" of the stitch, and sewing end point, using the sensor pen. See "USING SENSOR FUNCTIONS WITH SEWING STITCH" on page B-64. Do you feel like trying a - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 10
the initial setup procedures as well as descriptions of this machine's more useful functions. Chapter 1 Getting Ready To learn the operation of the principal to create bobbin work Page A-2 Chapter 2 Maintenance and Troubleshooting Find troubleshooting tips and pointers as well as how to keep your - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 11
19 Setting Your Machine for the First Time 20 LCD SCREEN 22 Using the Machine Setting Mode Key 25 Using the Sewing Machine Help Key 30 Using the Operation Guide Function 31 Using the Sewing Guide Function 32 Using the Pattern Explanation Function 33 LOWER THREADING 34 Winding the Bobbin 34 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 12
Making Step Stitch Patterns (for 7mm Satin Stitch Patterns Only 92 USING THE MEMORY FUNCTION 94 Stitch Data Precautions 94 Saving Stitch Patterns Screen Display 18 Touch Panel is Malfunctioning 18 TROUBLESHOOTING 19 Frequent troubleshooting topics 19 Upper thread tightened up 19 Tangled - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 13
winding Pass the thread through this thread guide when winding the bobbin thread. (page B-34) d Spool pin Place a spool of thread on the spool pin. (page B-42) e Spool cap Use the spool cap to hold the spool of thread in place. (page B-42) f Supplemental spool pin Use this spool pin to wind the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 14
the race. (page S-26) h Needle plate The needle plate is marked with guides to help sew straight seams. (page S-26) i Needle bar thread guide Pass the upper thread through the needle bar thread guide. (page B-42) j Needle clamp screw Use the needle clamp screw to hold the needle in place. (page B-49 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 15
button. The stitches are sewn in the opposite position. For other stitches, use this button to sew reinforcement stitches at the beginning and end of sewing this button again to raise the presser foot. g Sewing Speed controller Use this controller to adjust the sewing speed. Move the slide to the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 16
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Included Accessories 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 75/11 2 needles 90/14 2 needles 90/14 2 needles: Ball point needle (gold colored) 2.0/11 needle 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 17
This manual 49 Quick Reference Guide XF3634-001 No. Part Name 50 MY CUSTOM STITCH CD* Part Code Americas Others XE8901-001 Memo • Foot controller: Model T This foot controller can be used on the machine with product code 882-D00. The product code is mentioned on the machine rating plate - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 18
as optional accessories to be purchased separately from your authorized Brother dealer. 1 2 3 4 5 6 7 8 9 10 11 No. Part Name 1 Multi-function foot controller 2 10 spool stand 3 2 Spool stand 4 Seam guide 5 Walking foot 6 Side cutter foot 7 Free-motion quilting foot 8 Circular - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 19
Basic operations This section provides details on the initial setup procedures as well as descriptions of this machine's more useful functions. Page number starts with "B" in this section. Chapter1 Getting Ready B-18 Chapter2 Sensor Functions B-58 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 20
or "Shutoff Support Mode 28 ■ Changing the Pointer Shape When a USB Mouse Is Used ........ 28 ■ Selecting the Initial Screen Display 28 ■ Choosing the Display Language 29 ■ Saving a Settings Screen Image to USB Media 29 Using the Sewing Machine Help Key 30 Using the Operation Guide Function 31 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 21
if the machine is not to be used for a long period of time. Otherwise, a fire may result. • When leaving the machine unattended, either the main switch of the machine should be turned to OFF or the plug must be removed from the socket-outlet. • When servicing the machine or when removing covers - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 22
the setting, press . → The screen to set time/date appears. CAUTION • Only touch the screen with your finger or the included touch pen. Do not use a sharp pencil, screwdriver, or other hard or sharp object. It is not necessary to press hard on the screen. Pressing too hard or - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 23
screen. b Set the year (YYYY), month (MM) and date (DD). c Select whether 24h or 12h setting to display. d Set the current time. e Press to start using your machine. → The clock starts from 0 second of the time you set. Note • The time/date you set may be cleared, if you don't turn - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 24
a sharp pencil, screwdriver, or other hard or sharp object. It is not necessary to press hard on the screen. Pressing too hard or using a sharp object may damage the screen. ■ Utility Stitch Screen Press a key with your finger to select the stitch pattern, to select a machine function, or to - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 25
key display is light gray, the selected stitch pattern cannot be sewn in the twin needle mode. e Sensor function key Press this key to use the sensor function. B-64 f Image key Press this key to display an enlarged image of the selected stitch pattern. S-22 g Machine's memory Press this - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 26
key all key and button functions to prevent operation of the machine. B-51 l Sewing machine help Press this key to see explanations on how to use the machine. B-30 key m Machine setting Press this key to change the needle stop position, change the volume of B-25 mode key operation sound - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 27
1 Memo • Press or next to the page numbers, to display a different settings screen. Getting Ready a f i g j b k c l d h e m m m a Select whether to use the sewing speed controller to determine the zigzag width (see page S-39). b Make adjustments to character or decorative stitch - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 28
machine is not operating) to be up or down. Select the down position when using the pivot key. (see page S-15) b Select the operation of the " Select to save the machine power by setting the "Eco Mode" or the "Shutoff Support Mode" (see page B-28). g Select the initial screen that is displayed when - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 29
see page B-62). d Display the service count which is a reminder to take your machine in for regular servicing. (Contact your authorized dealer for details.) machine. Check with your local authorized Brother dealer or at " http://solutions.brother.com " for available updates (see page A-32). - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 30
Mode" You can save the machine power by setting the eco mode or the shutoff support mode. If you leave the machine without using for a specified period of time, the machine enters in one of these modes. "Eco Mode"; Machine will enter a sleep mode. Touch the screen or any - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 31
image files have already been saved on the USB media, the following message appears. In this case, delete a file from the USB media or use different USB media. Getting Ready a a Display language d Press to return to the original screen. ■ Saving a Settings Screen Image to USB Media An image of - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 32
available from the screen shown below. a b c a Press this key to see explanation for upper threading, winding the bobbin, changing the presser foot, and how to use the machine (see page B-31). b Press this key to select utility stitches when you are not sure which stitch to - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 33
LCD SCREEN Using the Operation Guide Function B Press to open the screen shown below. Five categories are of the functions. Certain individual threading screens are animated. information. displays troubleshooting displays information about cleaning the machine, etc. Basic operations B-31 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 34
half of the screen will change. d Press (upper threading). Using the Sewing Guide Function The sewing guide function can be used to select patterns from the Utility Stitch screen. Use this function when you are not sure which stitch to use for your application, or to get advice about sewing - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 35
for the Character/Decorative Stitch category is also displayed. • If the key appears in gray, the pattern explanation function cannot be used. Example: Displaying information about a Press . b Press . → The screen shows information. d Press to return to the original screen. Memo • The - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 36
spool pin. CAUTION • The included bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, (SFB: XA5539-151)). * Actual size a This - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 37
mm (1/2 inch) in diameter and 75 mm (3 inches) high is inserted onto the spool pin, use the special spool cap. a Spool pin b Spool cap c Thread spool CAUTION • If the thread the end of the thread, and use both hands to pass the thread through the thread guide. a Thread guide Basic operations B-35 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 38
the pre-tension disk. h Pass the end of the thread through the guide slit in the bobbin winder seat, and pull the thread to the right pre-tension disks. g Wind the thread clockwise bobbin 5-6 Times. around the a Guide slit (with built-in cutter) b Bobbin winder seat CAUTION • Be sure to - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 39
change the winding speed by pressing (to decrease) or (to increase) in the bobbin winding window. ■ Using the Spool Pin You can use the main spool pin to wind the bobbin before sewing. You cannot use this spool pin to wind the bobbin while sewing. • Press to minimize the bobbin winding window - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 40
and set the bobbin on the shaft. f Pass the thread through the thread guide. a Groove in the bobbin b Spring on the shaft c Pivot the spool pin so that the thread unwinds from the front of the spool. a Thread guide g Pass the thread around the pre-tension disk making sure that the thread is - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 41
a video example of the operation on the LCD (see page B-33). Follow the steps explained below to complete the operation. Getting Ready CAUTION • Use a bobbin thread that has been correctly wound. Otherwise, the needle may break or the thread tension will be incorrect. a Pre-tension disk c Push - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 42
right. e While lightly holding down bobbin with your right hand as shown, guide the thread through the slit (a and b). * At this time, check firmly around the tab with your left hand as shown, lightly pull the thread to guide it through the slit. a Slit b Cutter (Cut the thread with the cutter - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 43
darts, or doing free motion quilting. Memo • You can pull up the bobbin thread after threading the upper thread ("UPPER THREADING" on page B-42). a Guide the bobbin groove, following thread through the the arrow in the illustration. * Do not cut the thread with the cutter. * Do not replace the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 44
machine after threading the machine. → The upper thread shutter opens so the machine can be threaded. Memo • The automatic threading function can be used with sewing machine needle sizes 75/11 through 100/16. • Thread such as transparent nylon monofilament thread and thread with a thickness of 130 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 45
inch) in diameter and 75 mm (3 inches) high inserted onto the spool pin, use the special spool cap. CAUTION • If the thread spool and/or spool cap thread with both hands, from under the thread guide plate. a Thread guide plate g While holding hand, pass the the thread in your right - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 46
. a Look in the upper groove area i Pass the thread through the needle bar thread guide (marked "6") by holding the thread with both hands and guiding it as shown in the illustration. a Thread cutter Note • When using thread that quickly winds off the spool, such as metallic thread, it may be - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 47
Note • Some needles cannot be threaded with the needle threader. In this case, instead of B using the needle threader after passing the thread through the needle bar thread guide (marked "6"), manually pass the thread 1 through the eye of the needle from the front to the back. Getting Ready - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 48
on the needle bar, then thread the needle on the left side manually. a Needle bar thread guide Note • The "Automatic Threading" button cannot be used. Manually thread the twin needle from front to back. Using the "Automatic Threading" button may result in damage to the machine. d Pull up the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 49
thread guide i Press . j Select a stitch pattern. (Example: ) * Refer to the "STITCH SETTING CHART" on page S-67 for the proper stitch to use with the included spool net over the spool before using it. When using specialty threads, threading must be done manually. If the spool net is too long - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 50
in thread. Memo • When setting the thread spool, set it so that the thread winds off from the front of the spool. • If using metallic thread, we recommend that you use a 90/14 home sewing machine needle. • This method keeps the thread from twisting as it comes off the spool pin. B-48 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 51
Adapter You can attach the free motion echo quilting foot "E" and the optional walking foot, the optional free motion quilting foot and so on, using the included adapter and small screw. The following procedure shows how to attach the free motion echo quilting foot "E" as an example. Basic - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 52
CHANGING THE PRESSER FOOT ■ Attaching the Free Motion Echo Quilting Foot "E" a Follow the steps in "Removing Foot" in the previous page. the Presser b Loosen the screw of the presser foot to remove the presser foot holder. holder e Attach "E" on the the free motion echo quilting foot - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 53
from the top and the sides. Throw away any bent needles. B c Use the screwdriver to toward the front of the turn the screw machine and loosen the top of the needle stopper (viewing window) in the needle clamp. Use a screwdriver to securely tighten the needle clamp screw. b Press . * - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 54
for your sewing project will result in a beautiful finish and fewer problems. Below are some things to keep in mind about needles. • to follow the needle, thread, and fabric combinations listed in the table. Using an improper combination, especially a heavyweight fabric (i.e., denim) with a small - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 55
Getting Ready a USB port for mouse / media b USB media Memo • USB media is widely used, however some USB media may not be usable with this machine. Please visit our website for more computer (or USB hub), refer to the instruction manual for the corresponding equipment. Basic operations B-53 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 56
to perform a variety of operations in the screens. Note • If a mouse other than the optional USB mouse is used, it may not perform as described in this Operation Manual. ■ Changing Pages Rotate the mouse wheel to switch through the tabs of the pattern selection screens. Memo • If page numbers and - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 57
presser by aligning the notch of the dual feed foot to the large screw. Side view g Hold the dual feed foot in right hand, then using the place with included your screwdriver securely tighten the large screw. d Push the black button on the presser holder and remove the presser foot. foot - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 58
CONNECTING THE ACCESSORY TO THE MACHINE h Plug the connector of the dual feed foot into the jack on the back of your machine. ■ Using the Dual Feed Position Lever When the feed position lever is up, the black roller belt on the dual feed is not engaged. i Press buttons. - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 59
BY CONNECTING THE ACCESSORY TO THE MACHINE c Use feeding or of the to increase top fabric. or decrease the * Select "00" for sewing in most cases. * If the feed amount for the top - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 60
SENSOR PEN 59 CONNECTING THE SENSOR PEN 59 Using the Sensor Pen Holder 60 USING THE SENSOR PEN 61 Using the Sensor Pen 61 Important Information about Sensor Pen 61 Calibrating the Sensor Pen 62 USING SENSOR FUNCTIONS WITH SEWING STITCH..... 64 Sensor Function Area 64 Specifying the Guideline - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 61
width and position. Note • When the guideline does not appear clearly, set the brightness of the machine light dimmer to see them clearly. Refer to "Using the Machine Setting Mode Key" on page B-25. CONNECTING THE SENSOR PEN When connecting the sensor pen to the machine, make sure that the arrow - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 62
the sensor pen with the machine. The right side of the holder can be used to hold the touch pen. c Set the sensor pen in the sensor pen downward, and then connect the sensor pen to the machine. Sensor pen holder a Using the point end of the cleaning the seam ripper point, remove the brush or - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 63
sensor pen receiver receives the signal to specify the position. When using the sensor pen, touch slowly and gently for the definite operation • If there is any problem with the guideline marker, the sensor function may not operate correctly. Memo • The sensor pen can be used to touch on the screen - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 64
. → The settings screen appears. b Display page 6 of the settings screen. a Needle plate cover e Touch the second point of center cross-hair using the sensor pen. of c Press pen to the while connecting machine. the sensor → The Sensor Function Calibration screen appears. * Touch on the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 65
f Press repeat the to finish the calibration. To calibration touch the first point again using the sensor pen, and continue with step e. USING THE SENSOR PEN B 2 Sensor Functions * Press to return to the original screen without finishing the calibration. * Press to reset the calibration. - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 66
, carefully read "Utility Stitches" chapter to familiarize yourself with the machine operations. The sensor functions are performed using the sensor pen. Sensor Function Area When using the sensor pen with utility stitches, the operations may differ depending on the area to be touched. Memo - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 67
the sensor pen to specify the 2 guideline marker position, it may not be possible to exactly specify the desired location. In this case, use either of the following operations to make fine adjustments. Sensor Functions - Touch an adjustment area with the sensor pen to adjust the position in - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 68
USING SENSOR FUNCTIONS WITH SEWING STITCH Specifying the Needle Drop Position With the Sensor Pen a Turn on the be precisely adjusted by touching the adjustment areas with the sensor pen. • To change the setting, use the sensor pen to touch the desired location for the reference position. B-66 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 69
appears again, and the stitch width changes to the setting specified with the sensor pen. → The guideline marker stops flashing. B 2 Sensor Functions Using the Sensor Pen to Specify the Stitching Width and Stitch Position The zigzag width and "L/R SHIFT" value can be specified. → The sensor - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 70
USING SENSOR FUNCTIONS WITH SEWING STITCH Note • The following error message appears if the area outside of the sensor pen touch range is touched. Press , and - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 71
Sensor Pen to Specify the Sewing End Point Before start sewing, test the pattern first from steps a to e to see if the stitch can be used with this function. a Turn on the machine. f With the sensor pen, touch the location be specified as the sewing end point. to → The distance from - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 72
USING SENSOR FUNCTIONS WITH SEWING STITCH Note • The displayed distance is not the feed the fabric straight, otherwise the actual end point may be different from the point you set. • When using the sensor pen to specify the sewing end point, the sewing end point may be slightly different than the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 73
Sewing This section describes procedures for using the various utility stitches as well as other functions. It provides details on basic sewing in addition to the more expressive features of the machine, - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 74
"L/R SHIFT 11 Setting the Thread Tension 12 ■ Proper Thread Tension 12 ■ Upper Thread is Too Tight 12 ■ Upper Thread is Too Loose 12 USEFUL FUNCTIONS 13 Automatic Thread Cutting 13 Adjusting the Needle Drop Position with the Guideline Marker (For models equipped with the guideline marker 14 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 75
while the machine is in operation. Sewing Basics • Do not stretch or pull the fabric during sewing. Doing so may lead to injury. • Do not use bent or broken needles. Doing so may lead to injury. • Do not attempt to sew over basting pins or other objects during sewing. Otherwise, the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 76
. "Start/Stop" button to start * Guide the fabric lightly by hand. Note • When cutting thread thicker than #30, nylon monofilament thread, or other decorative threads, use the thread cutter on the side of the machine. Memo • When the foot controller is being used, you cannot start sewing by - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 77
to stop the Sewing Reinforcement Stitches Reverse/reinforcement stitches are generally necessary at the beginning and end of sewing. You can use the "Reverse Stitch" button to sew reverse/reinforcement stitches. When you keep pressing the "Reinforcement Stitch" button, the machine will sew - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 78
SEWING b Press to set the automatic reinforcement stitching function. d Press the "Reverse Stitch" button "Reinforcement Stitch" button. or → The key will display as . Memo • Some stitches, such as buttonholes and bar tacks, require reinforcement stitches at the beginning of sewing. If you - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 79
If the thickness of a seam causes sewing to occur at an angle, help guide the fabric by hand and sew on the downward slope. Changing Sewing Direction Stop the , and press the "Presser Foot Lifter" button to raise the presser foot. Using the needle as a pivot, turn the fabric so that you can sew in - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 80
foot remains level, enabling the fabric to be fed. Memo • Once the trouble spot has been passed, the foot will return to its normal position. • S-17 for details.) Sewing Hook-and-Loop Fastener CAUTION • Do not use adhesive backed hook-and-loop fastener designed for sewing. If the adhesive sticks - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 81
Sewing Stretch Fabrics First, baste together the pieces of fabric, and then sew without stretching the fabric. In addition, a better result can be achieved by using thread for knits or a stretch stitch. Memo • For best results when sewing stretch fabrics, decrease the pressure of the presser foot - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 82
. Follow the steps below when you want to change the zigzag stitch pattern width. Memo • For an alternate method of changing the stitch width using the speed controller, see page S-39. Example: Press to narrow the zigzag stitch pattern width. → The value in the display gets bigger. Memo • Press - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 83
Example: Press to shorten the stitch length. → The value in the display gets smaller. Press to lengthen the stitch length. STITCH SETTINGS Setting the "L/R SHIFT" S Follow the steps below when you want to change the placement of the zigzag stitch pattern by moving it left and right. 1 Sewing - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 84
STITCH SETTINGS Setting the Thread Tension You may need to change the thread tension, depending on the fabric and thread being used. Follow the steps below to make any necessary changes. ■ Proper Thread Tension The upper thread and the bobbin thread should cross near the center of - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 85
, depending on the stitch pattern) at the beginning and end of sewing, and trim the threads at the end of sewing. This function is useful when sewing buttonholes and bar tacks. a Select a stitch pattern. b Press to set the automatic thread cutting function. S c Set the fabric sewing. in the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 86
appears. * Depending on the setting of "Initial Position" in the settings screen, the intial needle drop position is scaled as either 0.0 mm or 3.5 mm. b Use or position. to move the needle drop → Adjust the position from 10.5 mm (3/8 inch) to the right of the left needle to -3.5 mm (-1/8 inch - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 87
for a dim marker, to "5" for the brightest marker, on the fabric. b Use your knee to move the knee lifter bar to the right in order to raise the into the mounting slot as far as possible, it may come out during use. If the pivot setting is selected, the machine stops with the needle lowered - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 88
J or N is indicated in the upper-left corner of the screen. If any other stitch is selected, appears as light gray and is not available. • Use the "Presser Foot Lifter" button to make sure the presser foot is lowered, and then press the "Start/Stop" button to continue sewing. • If the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 89
with an internal sensor while sewing, to insure that your fabric is fed smoothly. The fabric sensor system works continuously while sewing. This function is useful → The machine stops with the needle in the fabric, and the presser foot is raised. for sewing over thick seams (see page S-8), or - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 90
USEFUL FUNCTIONS Needle Position - Stitch Placement When the "Needle Position - Stitch Placement" is on, the needle will be partially lowered for precise stitch placement and then - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 91
Sewing Basics USEFUL FUNCTIONS S 1 Sewing S-19 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 92
Fell Seam 29 Pintuck 30 Zigzag Stitches 31 ■ Overcasting (Using a Zigzag Stitch 31 ■ Appliqué (Using a Zigzag Stitch 31 ■ Patchwork (for Crazy Quilt 32 ■ Sewing Curves (Using a Zigzag Stitch 32 ■ Cord Guide Bobbin Cover (Using a Zigzag Stitch 32 Elastic Zigzag Stitches 33 ■ Tape Attaching - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 93
stitch. → Either "1-01 Straight stitch (Left)" or "1-03 Straight stitch (Middle)" is selected, depending on the setting selected in the settings screen. b Use category you want. to select the Note • If is light gray after you select a stitch, you cannot create a horizontal mirror image of the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 94
SELECTING UTILITY STITCHES ■ Using the Image Key You can display an image of the selected stitch. You can check and change the colors of the image of the screen. a - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 95
■ Retrieving Saved Settings a Select a stitch. Memo • When a stitch is selected, the last settings retrieved are displayed. The last settings retrieved are retained even if the machine was turned off or a different stitch was selected. b Press . → The memory function screen appears. c Press . d - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 96
SEWING THE STITCHES SEWING THE STITCHES Straight Stitches See page S-67 for the detailed information of stitches. Stitch Stitch name Straight stitch (Left) Presser foot Straight stitch (Left) Straight stitch (Middle) Straight stitch (Middle) Triple stretch stitch Stem stitch Decorative - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 97
THE STITCHES ■ Changing the Needle Position (Left or Middle Needle Position Stitches Only) S When you select left or middle needle position stitches, you can use and in the stitch 2 width display to change the position of the needle. Match the distance from the right edge of the presser foot - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 98
stitches with a left needle position (Stitch width: 0.0 mm) ■ Using the Straight Stitch Needle Plate and the Straight Stitch Foot The straight to reduce puckering on lightweight fabrics. The small opening on the foot provides support for the fabric as the needle travels through the fabric. a Seam - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 99
the machine. g Set the straight stitch needle plate in place and use the disc-shaped screwdriver to tighten the plate. CAUTION • Selecting screw holes on the needle plate with the two holes on the machine. Use the disc-shaped screwdriver included with the machine to secure the screws in the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 100
stitching is preset, a reinforcement stitch will automatically be sewn at the beginning of sewing. Memo • When you use the basting stitch for gathering, do not use a reinforcement stitch at the beginning; you should lift the presser foot, rotate the handwheel toward you (counterclockwise - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 101
two rows the seam line, of straight stitches parallel then trim excess thread to leaving 50 mm (approx. 1-15/16 inches). S 2 Utility Stitches Gathering Use on waists of skirts, sleeves of shirts, etc. a Select a straight foot "J". stitch and attach presser a Seam line b 10 mm to 15 mm - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 102
SEWING THE STITCHES reinforcement stitch and trim the thread automatically at the end of sewing. Finished flat fell seam a About 12 mm (approx. 1/2 inch) b Wrong side c Spread the fabric out along the finish line. a Surface Pintuck a Mark along the fabric. the folds on the wrong side of - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 103
while positioning the right-hand side needle drop point just outside the edge of the fabric. Zigzag Stitches Zigzag stitches are useful for overcasting, appliqué, patchwork, and many other applications. Select a stitch, and attach presser foot "J". See page S-5 for the detailed information of - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 104
right side up on top of the cord and place the cord to the rear of the machine under the presser foot. ■ Cord Guide Bobbin Cover (Using a Zigzag Stitch) a Remove the bobbin cover from the ("Setting the Bobbin" of "Basic machine operations"). b Thread the gimp thread through the hole the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 105
See page S-67 for the detailed information of stitches. Stitch Stitch name 2 steps elastic zigzag Presser foot SEWING THE STITCHES ■ Overcasting Use this stitch to sew overcasting on the edge of stretch fabrics. Sew the overcasting along the edge S of the fabric while positioning the right - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 106
its highest level, the needle may strike the presser foot. ■ Overcasting Using Presser Foot "J" See page S-67 for the detailed information of stitches. Stitch Stitch name Overcasting stitch Presser foot b Lower the foot guide presser foot so that the presser is set flush against the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 107
Knee Lifter" on page S-15). The 30 quilting stitches Q-01 through Q-30 and the utility stitches with "P" or "Q" indicated on their key are useful for quilting. The "P" or "Q" at the bottom of the key display indicates that these stitches are intended for ("Q") quilting and ("P") piecing. See page - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 108
other categories. For example: Stitch Q-03 has 57 needle positions and stitch Q-19 has 29 width selections. a 6.5 mm (approx. 1/4 inch) * To change the needle position, use or in the width display. S-36 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 109
the guideline marker is set at 10.0 mm (3.5 mm plus 6.5 mm, close to 1/4 inch), you can sew piecing with referring the guideline marker. ■ Piecing Using the 1/4" Quilting Foot with Guide (optional with some models) This quilting foot can sew an accurate 1/4 inch or 1/8 inch seam allowance. It can be - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 110
Trace the pattern onto the appliqué fabric and then cut around it, leaving a 3 mm to 5 mm (approx. 1/8 inch to 3/16 inch) seam allowance. e Use the quilting appliqué stitch to attach the appliqué. Sew around the edge while dropping the needle as close to the edge as possible. a Seam allowance - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 111
c Sunbonnet sue ■ Quilting with Satin Stitches For better fabric control, use the foot controller to sew with satin stitches. Set the speed control 64 inch to 1/32 inch) is best for satin stitches. d Press to use the speed control slide to control the stitch width. h When you are finished sewing, - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 112
fabric is moved faster than the sewing speed, the needle may break or other damage may result. Using free motion open toe quilting foot "O" The free motion open toe quilting foot "O" is used for free motion quilting with zigzag or decorative stitches or for free motion quilting of straight lines on - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 113
sure to securely tighten the screws with the included screwdriver. Otherwise, the needle may touch the quilting foot, causing it to bend or break. f Use both hands to stretch the and then move the fabric at a fabric taut, consistent pace in order to sew uniform stitches roughly 2.0 mm - 2.5 mm - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 114
SEWING THE STITCHES a Attach the straight page S-26). stitch needle plate (see → The key appears as , the quilting foot is raised to the necessary height, and then the feed dogs are lowered for free motion sewing. a a Round hole Memo • Notice this needle plate has a round hole for the needle - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 115
ripples echoing away from the motif, are the distinguishing characteristic of this quilting style. Use the free motion echo quilting foot "E" for echo quilting. Using the measurement on the presser foot as a guide, sew around the motif at a fixed interval. We recommend attaching the foot controller - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 116
SEWING THE STITCHES CAUTION • With free motion quilting, control the feeding speed of the fabric to match the sewing speed. If the fabric is moved faster than the sewing speed, the needle may break or other damage may result. Memo • When starting to sew, the internal sensor detects the thickness of - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 117
f Using the measurement on as a guide, sew around the the quilting motif. foot SEWING THE STITCHES Blind Hem Stitches S Secure the bottoms of skirts and pants with a blind hem. Two stitches - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 118
blind hem foot "R". g Select or . h Remove the free-arm. flat bed attachment to use the i Slide the item that you wish to sew onto the free arm, make sure that the fabric with the edge of folded hem against the guide of the the presser foot, and then lower the presser foot lever. a Wrong side - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 119
the right side of the fabric will be very large, leaving an unattractive finish. If you experience either of these cases, follow the instructions below to solve the problem. 1 2 a Wrong side of fabric b Right side of fabric ■ If the Needle does not Catch the Hem Fold The needle is too far to - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 120
fabric l Sew with the fold of the hem against the presser foot guide. m Remove the the fabric. basting stitching and reverse a Appliqué material 1 2 a Wrong side of fabric b Right side of fabric Appliqué a Use a temporary spray adhesive, fabric glue or a basting stitch to attach the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 121
the appliqué fabric. Shelltuck Stitches Shelltuck stitches give an attractive appearance of shells along the curve of a collar. This stitch pattern can be used for edging the neckline or sleeves of dresses and blouses. a Select . Memo • For details on each stitch, refer to the "STITCH SETTING - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 122
seam, making sure not the stitches. to cut Memo • To make shell tucks at the edge of a collar or neckline, follow the pattern's instructions and then use this stitch to make a decorative finish on the collar or neckline. Scallop Stitches This wave-shaped satin stitch is called the scallop stitch - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 123
of gather, and then smooth the gathers by ironing them. S 2 Utility Stitches f Select or . a Right side of fabric Smocking Stitches Use smocking stitches for decorative sewing on clothes, etc. a Select a straight foot "J". stitch and attach presser b Set the stitch length to 4.0 mm - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 124
or Elastic Attaching When there is a space between two fabrics with thread sewn over the space to join the fabrics together, it is called fagoting. Use this stitch when sewing blouses or children's clothes. a Baste two pieces of fabric onto thin paper, leaving a space of 4 mm (approx. 3/16 inch - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 125
may result in damage to the machine. • A more attractive finish can be obtained if you use a "130/705H Wing" needle when sewing these patterns. If using a wing needle and the stitch width has been set manually, check that the needle will not touch the presser foot by carefully rotating the handwheel - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 126
SEWING THE STITCHES c Start sewing. Example: Illustration of finished product d Press stitch. to create a mirror image of the e Match beginning needle drop points on the opposite edge of the open area to keep the stitching symmetrical. ■ Hemstitching (2) (Drawn Work (1)) a Pull out several - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 127
Stitch Stitch name Bound buttonhole Presser foot Keyhole buttonhole Tapered keyhole buttonhole S 2 Utility Stitches Keyhole buttonhole Memo • A wing needle can be used for Hemstitching (3). One-step buttonholes are sewn from the front of the presser foot to the back, as shown below. One - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 128
SEWING THE STITCHES a Select a buttonhole stitch, buttonhole foot "A". and attach b Mark the position and length buttonhole on the fabric. of the 2 1 Note • Pass the thread underneath the presser foot. • Slide the outside frame of the buttonhole foot backward as far as possible as shown - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 129
foot, and then temporarily tie them there. Utility Stitches a Basting pin b Seam ripper a Upper thread b Lower the presser foot and start sewing. CAUTION • When using the seam ripper to open the buttonhole, do not put your hand or finger in the path of the ripper. The ripper may slip and - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 130
Shaped Buttons/Buttons that do Not Fit into the Button Holder Plate Use the markings on the presser foot scale to set the size of and thickness together, and then set the plate at the calculated value. Darning Use darning stitches for mending and other applications. See page S-67 for the detailed - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 131
increase the stitch length setting. d Lower the buttonhole lever so that it is positioned behind the metal bracket on the buttonhole foot. Bar Tacks Use bar tacks to reinforce areas that will be subject to strain, such as pocket corners. See page S-67 for the detailed information of stitches - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 132
SEWING THE STITCHES Memo • Bar tacks can be between 5 mm (approx. 3/16 inch) and 28 mm (approx. 1-1/16 inches). Bar tacks are usually between 5 mm (approx. 3/16 inch) and 10 mm (approx. 3/8 inch). c Set the fabric so that the pocket toward you during sewing. moves e Lower the buttonhole lever - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 133
. Button Sewing Buttons with 2 or 4 holes can be attached, using the machine. See page S-67 for the detailed information of stitches. Stitch Stitch name Button sewing Presser foot Note • Do not use the automatic thread cutting function when sewing buttons. Otherwise, you will - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 134
the next two holes, and sew them in the same way. Eyelet Use this stitch for making belt holes and other similar applications. See page S- a Pull the sewing. shank lever toward you before a Select . b Use or in either the stitch width display or the stitch length display to choose - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 135
Utility Stitches Multi-directional Sewing (Straight Stitch and Zigzag Stitch) Use these stitch patterns to attach patches or emblems to pant legs, flat bed attachment to use the a Start Point d Select and sew seam "2" as shown. * The fabric will move sideways, guide the fabric by hand - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 136
attach the zipper foot. Memo • For details on each stitch, refer to the "STITCH SETTING CHART" on page S-67. Note • Make sure you sew using the middle needle position. b Attach presser foot "J" and sew straight stitches up to the zipper opening. Change to a basting stitch (see page S-28) and - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 137
Align the right side of the pin in zipper foot "I" with the presser foot holder, and attach the presser foot. Note • Make sure you sew using the middle needle position. b Attach presser foot "J" and sew straight stitches up to the zipper opening. Change to a basting stitch and sew to the top - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 138
SEWING THE STITCHES g Starting from the end of sew to a point about 50 the zipper opening, mm (approx. 2 inches) from the edge of the fabric, then stop the machine. h Pull down the zipper slider, then sewing to the edge of the fabric. continue j Remove the presser foot, and reattach it so - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 139
, and whether or not the twin needle mode can be used. Stitch Stitch name Straight stitch (Left) Straight stitch (Left stitch Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle General sewing, gather, pintuck, etc. 0.0 0.0 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 140
STITCH SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle Overcasting stitch Reinforcing of heavyweight fabric 5.0 (3/16) 2.5 - 5.0 (3/32 - 3/16) 2.5 (3/32) 0.4 - 5.0 (1/64 - 3/16) NO - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 141
for invisible appliqué or attaching binding Background quilting Hemming woven fabrics Stitch width [mm (inch)] Auto. Manual 1.5 (1/16) 0.0 - 7.0 (0 - 1/4) 7.0 (1/4) 0.0 - 7.0 (0 - 1/4) 00 3← - →3 Blind hem stitch stretch Hemming stretch fabric 00 3← - →3 Blanket stitch Shell tuck edge - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 142
Honeycomb stitch Honeycomb stitch Hemstitching Hemstitching Presser foot Applications Stitch width [mm (inch)] Auto. Manual Decorative stitching and attaching elastic 5.0 (3/16) 0.0 - 7.0 (0 - 1/4) Decorative stitching and appliqué 6.0 (15/64) 0.0 - 7.0 (0 - 1/4) Decorative stitching - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 143
SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle Hemstitching Heirloom, decorative hems 6.0 (15/64) 0.0 - 7.0 (0 - 1/4) 4.0 0.4 - 5.0 OK (3/16) (1/64 - 3/16) ( J ) Hemstitching - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 144
STITCH SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle Keyhole buttonhole Tapered keyhole buttonhole Keyhole buttonhole Darning Buttonholes in heavyweight or thick fabrics for larger flat - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 145
STITCH SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle Forward (Zigzag) Reverse (Zigzag) Piecing stitch (Middle) For attaching appliqué on tubular pieces of fabric and - mitering - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 146
Reinforcement of stretch fabric or decorative stitching 4.00 (3/16) 0.00 - 7.00 (0 - 1/4) Stitch length [mm (inch)] Auto. Manual Twin needle 1.4 (1/16) 0.2 - 5.0 (1/64 - 3/16) NO 2.0 (1/16) 0.2 - 5.0 (1/64 - 3/16) NO 2.5 (3/32) 0.4 - 5.0 (1/64 - 3/16) NO 2.5 (3/32) 0.4 - 5.0 (1/64 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 147
Utility Stitches STITCH SETTING CHART S 2 Sewing S-75 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 148
Stitch Data Precautions 94 ■ Types of Stitch Data that can be Used 94 ■ Types of USB Devices/Media that can be Used 94 ■ Computers and Operating Systems with the Following Specifications can be Used 94 ■ Precautions on Using the Computer to Create and Save Data ...... 94 Saving Stitch Patterns - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 149
SELECTING STITCH PATTERNS SELECTING STITCH PATTERNS S Press to display the screen below. There are 7 categories of Character/Decorative stitch patterns. 3 a c b d e f g h i j k l Character/Decorative Stitches a Decorative stitch patterns b 7mm decorative stitch patterns. You can - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 150
. → The selected pattern is displayed. Memo • There are four fonts for alphabet character stitching, and a font for Japanese character stitching. Refer to the Quick Reference Guide for the details about the different font selections available. c Press a tab to change the selection screens. S-78 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 151
d Press and then enter "B". h Press SELECTING STITCH PATTERNS and then enter "ky". S 3 Character/Decorative Stitches e Press and then enter "lue". * If you want to continue entering characters in a different font, press , and then repeat from step b. ■ Deleting Characters a Press to - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 152
SELECTING STITCH PATTERNS ■ Adjusting the Character Spacing The space between the characters can be adjusted. b Press or to adjust character spacing. a Press * Press . to display on the screen. → The character spacing window appears. * Press to increase the character spacing and press to - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 153
bunching of stitches, so be sure to attach a stabilizer material. • Guide the fabric with your hand to keep the fabric feeding straight and heavyweight fabrics: home sewing machine needle 90/14 Monogramming foot "N". Using another presser foot may give inferior results. Basic Sewing d Press the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 154
may be movement to the left and right as well as front and back. Guide the fabric with your hand to keep the fabric feeding straight and even during sewing fed due to the operation of the needle bar separation mechanism which is used in this machine. At such times, a clicking sound different from the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 155
b Attach monogramming the pattern. foot "N" and sew c Compare the finished pattern to the illustration of the correct pattern below. d Press , and then adjust the pattern with the "Fine Adjust Verti." or "Fine Adjust Horiz." displays. SEWING STITCH PATTERNS * If the pattern is bunched: - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 156
functions. Make patterns larger or smaller, make mirror images, etc. Note • Some editing functions cannot be used with certain stitch patterns. Only the functions for the displayed keys are available when a pattern is selected. u t s r a b l q c d k m p e j o n f i g h y x v No - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 157
lowered. Page S-15 • If this key appears as , the pivot function cannot be used. • Be sure the "Needle Position - UP/DOWN" of Machine Settings is set 13 key f Horizontal mirror image key After selecting the stitch pattern, use this key to create a horizontal S-86 mirror image of the stitch - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 158
EDITING STITCH PATTERNS Changing the Size Creating a Vertical Mirror Image Select a stitch pattern, then press to change the size of the stitch pattern. The stitch pattern will be sewn in the size highlighted on the key. To create a vertical mirror image, select a stitch pattern then press . - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 159
EDITING STITCH PATTERNS Memo • To finish a complete motif while sewing the pattern continuously, you can press the key while sewing. The machine will automatically stop when the motif is finished. Changing Thread Density (for Satin Stitch Patterns Only) Returning to the Beginning of the Pattern - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 160
the screen. a Press . → An image of the selected pattern is displayed. b Press to change the thread color in the image to red, blue, or black. d Use / / / to view any part of the image that extends out of the viewable display area. e Press to return to the original screen. → The color changes - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 161
COMBINING STITCH PATTERNS COMBINING STITCH PATTERNS S You can combine many varieties of stitch patterns, such as character stitches, cross stitches, satin stitches, or stitches you design with "MY CUSTOM STITCH" function (see page S-102 for information about "MY CUSTOM STITCH"). You can also - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 162
COMBINING STITCH PATTERNS e Select . a Press . → The large size stitch will be selected. b Press again, then press the small size. to select f Press g Press to sew the pattern continuously. . → The pattern is displayed in a smaller size. c Press to sew continuously. Memo • Patterns are - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 163
Combining Horizontal Mirror Image Stitch Patterns Example: COMBINING STITCH PATTERNS Combining Stitch Patterns of Different Length S Example: 3 Character/Decorative Stitches a Press . b Press again, then press . a Press , then press once. → The length of the image is set to . b - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 164
PATTERNS c Press . Example: → The entered pattern is repeated. Making Step Stitch Patterns (for 7mm Satin Stitch Patterns Only) a Press . b Press . You can use the keys with 7mm satin stitch patterns to create a step effect. Stitch patterns sewn so that they create a step effect are called - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 165
e Press . COMBINING STITCH PATTERNS Press → → → . S 3 Character/Decorative Stitches → The entered pattern is repeated. ■ More Examples Press → → → → . Press → → → → → → → → . Press → → → → → → → → . Sewing S-93 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 166
only from; • USB CD-ROM, CD-R, CD-RW drives You can also use the following types of media with the USB Memory Card Reader/USB card writer module. If this occurs, change the name of the file/folder. We recommend using the 26 letters of the alphabet (uppercase and lowercase), the numbers 0 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 167
pattern you are saving. Memo • It takes a few seconds to save a stitch pattern. • See page S-98 for information on retrieving a saved stitch pattern. USING THE MEMORY FUNCTION ■ If the Memory is Full If the following screen appears while you are trying to save a pattern on the machine's memory - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 168
USING THE MEMORY FUNCTION c Press . → A confirmation message appears. d Press . * If you this machine. Please visit our website for more details. • Depending on the type of USB media being used, either directly plug the USB device into the machine's USB port or plug the USB media Reader/Writer - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 169
USB media Note • The processing speed may vary by quantity of data. • Two USB media cannot be used with this machine at the same time. If two USB media are inserted, only the USB media inserted first computer (or USB hub), refer to the instruction manual for the corresponding equipment. Sewing S-97 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 170
USING THE MEMORY FUNCTION c Press . Retrieving Stitch Patterns from the Machine's Memory a Press . d Press * Press saving. . to return to the original screen without → The pocket selection - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 171
a Folder name b Stitch patterns in a folder show only the first pattern of any combined patterns. c Path * Press to return to the previous folder. * Use the computer to create folders. Folders cannot be created with the machine. d Press the to recall. key of the stitch pattern you want - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 172
USING THE MEMORY FUNCTION e Press . * Press to delete the stitch pattern. The pattern will be deleted from the USB media. c Move/copy Disk". the pattern data - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 173
f Press . * Press to delete the stitch pattern. The pattern will be deleted from the "Removable Disk" folder in your computer. USING THE MEMORY FUNCTION S 3 Character/Decorative Stitches → The selected stitch pattern is recalled and the sewing screen will be displayed. Note • The pattern - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 174
DESIGNING A STITCH 103 ENTERING STITCH DATA 105 ■ Key Functions 105 ■ Moving a Point 107 ■ Moving Part or All of the Design 108 ■ Inserting New Points 109 USING STORED CUSTOM STITCHES 110 Storing Custom Stitches in Your List 110 ■ If the Memory is Full 110 Retrieving Stored Stitches 111 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 175
DESIGNING A STITCH DESIGNING A STITCH S By using the "MY CUSTOM STITCH" function, you can register stitches you have created yourself. b Decide the spacing of the stitch. 4 You can also sew designs combining " - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 176
DESIGNING A STITCH Examples of Custom Stitches Stitch Stitch Stitch 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 12 18 22 23 21 17 14 12 9 6 3 1 3 6 0 0 3 6 10 13 14 13 11 13 14 13 10 6 3 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 12 41 43 40 41 38 35 32 30 32 35 41 45 47 44 0 0 4 7 11 13 14 13 10 6 3 0 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 177
k Set key Press this key to set a point on the stitch design. S-106 to S-108 l Arrow keys Use these keys to move over the display area. S-106 to S-109 m Point-to-point key Use these keys to move from point to point on the stitch, or to S-107 to the first or - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 178
ENTERING STITCH DATA a Press . b Press . * Press created. to enlarge the image of the stitch being a b c Use to move to the coordinates of the first point on the grid sheet. * Press sheet. to change the direction of the grid a Currently selected point/ - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 179
f Use to move and press . to the second point ENTERING STITCH DATA Memo • If an image of the stitch. a Linking stitches • You can touch on the grid sheet to set the point, or you can also use a USB mouse. ■ Moving a Point a Press or to move that you want to move. to the point * To move - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 180
section that you want to move. * To move to the first point, press . * To move to the last point, press . * You can also move by using the touch pen. → The selected point and all points that were entered after it are selected. c Press or to move the section. S-108 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 181
you want to add a new point. * To move to the first point, press . * To move to the last point, press . * You can also move by using the touch pen. → A new point is entered and moves to it - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 182
STORED CUSTOM STITCHES Storing Custom Stitches in Your List Stitch patterns created using the "MY CUSTOM STITCH" function can be stored for later use. Once you finish entering the stitch data, press . The "Saving" message appears and the stitch will be stored. Before storing a stitch, press - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 183
Retrieving Stored Stitches a Press . USING STORED CUSTOM STITCHES c Press . * To delete the stored stitch pattern, press . S * To edit the stored stitch pattern, press . 4 MY CUSTOM STITCH → A list of stored stitch - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 184
USING STORED CUSTOM STITCHES S-112 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 185
section provides important information for operating this machine. Please read this section to find troubleshooting tips and pointers as well as how to keep your machine in the best working countries or regions. Chapter1 How to Create Bobbin Work A-2 Chapter2 Maintenance and Troubleshooting A-14 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 186
Motion Sewing 11 ADJUSTING THE THREAD TENSION 12 ■ Adjusting the upper thread tension 12 ■ Adjusting the tension of the bobbin thread 12 TROUBLESHOOTING 13 ■ The thread was accidentally cut automatically and the bobbin thread is caught inside the machine 13 ■ Correcting bobbin work tension 13 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 187
ABOUT BOBBIN WORK ABOUT BOBBIN WORK A Beautiful embroidery work, with a three-dimensional appearance, can be created by winding the bobbin with medium to heavy weight thread or ribbon, which is too thick to be threaded through the machine's needle. The decorative thread or ribbon will stitch out - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 188
best stitching results. If wide ribbon such as 3.5mm (approx. 1/8 inch) is to be used, we recommend that bobbin case tension not be applied. Refer to page A-7 for more detailed instructions. Note • Do not use thread heavier than No.5 hand embroidery thread. • Some threads may not be appropriate for - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 189
any lint and dust from the race and its surrounding area. a Cleaning brush b Race a S mark b ● mark c Bobbin case Note • The bobbin case (gray) cannot be used for sewing in any way other than bobbin work. After sewing bobbin work, refer back to the steps in "Preparing the Bobbin Thread" on page - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 190
best results, wind the bobbin so the thread is snug and not twisted. i Using scissors carefully trim the thread as close to the bobbin as possible. tail a thread completely becoming tangled or damage to the machine. • Do not guide the bobbin thread through the groove in the needle plate cover, - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 191
PREPARING FOR BOBBIN WORK ■ When tension is not applied to the bobbin thread m Gently pull the upper thread to bring the bobbin thread up through the needle plate. If the bobbin thread in the trial stitching is too tight A and adjusting the bobbin case tension does not help, do not pass the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 192
the needle plate cover, refer to "Cleaning the Race" on page A-15. a Bobbin cover b Bobbin cover with tabs CAUTION • When creating bobbin work, use the bobbin cover with tabs, otherwise the thread may become tangled or the needle may break. Note • When installing the needle plate cover, do not - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 193
for bobbin work. How to Create Bobbin Work Note • Recommended stitches for bobbin work are open "airy" type stitches. • Be sure to sew trial stitches using same fabric and threads as project in order to check the sewing results. • The bobbin thread may become tangled due to the type of pattern - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 194
CREATING BOBBIN WORK h Use the presser presser foot. foot lever to raise the i With the , and then lower the presser foot lever. a Upper thread l Raise the presser foot lever, and then use tweezers to pull up the bobbin thread and bring the end of the thread to the top of the fabric - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 195
Cutter" button to cut the threads, otherwise the machine may be damaged. ■ Finishing the thread ends a At the end of the sewing needle to stitching, use a hand bring the bobbin thread up to the wrong side of the fabric. CREATING BOBBIN WORK b Working from tie the bobbin the wrong and upper - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 196
(gray) as this may result in damage to the bobbin case, rendering it useless. • If the slotted-head screw (-) is difficult to turn, do not use force. Turning the screw too much or providing force in either (rotational) direction may cause damage to the bobbin case. Should damage occur, the bobbin - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 197
TROUBLESHOOTING TROUBLESHOOTING A Several solutions for minor problems are described below. If the problem persists, contact your dealer or nearest authorized Brother dealer. 1 ■ The thread was accidentally cut automatically and the bobbin thread d Apply slight tension on bobbin thread by - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 198
Brightness of the Screen Display 18 Touch Panel is Malfunctioning 18 TROUBLESHOOTING 19 Frequent troubleshooting topics 19 Upper thread tightened up 19 ■ Symptom 19 ■ Cause YOUR MACHINE'S SOFTWARE........ 32 Upgrade Procedure Using USB Media 32 Upgrade Procedure Using Computer 33 INDEX 34 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 199
shock or injury may result. Maintenance and Troubleshooting Restrictions on oiling Cleaning the Machine Casing In problems occur, such as difficulty turning the handwheel or an unusual noise, immediately stop using the machine, and contact your authorized dealer or the nearest authorized service - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 200
case aligns with the ● mark on the machine. * Make sure that the indicated points are aligned before installing the bobbin case. CAUTION • Never use a bobbin case that is scratched; otherwise, the upper thread may become tangled, the needle may break, or sewing performance may suffer. For a new - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 201
CARE AND MAINTENANCE Maintenance and Troubleshooting Cleaning the Cutter in the Bobbin d Use the screwdriver included with the recommended to take your machine to an authorized dealer or nearest authorized service center for a regular maintenance check. Although this message will disappear and - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 202
the included touch pen, lightly the center of each +, in order from 1 touch to 5. Note • Only use the included touch pen to touch the screen. Do not use a mechanical pencil, pin, or other sharp object. Do not press too hard on the screen. Otherwise, damage may result. +1 +4 +5 +2 +3 c Turn - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 203
check the following possible problems before requesting service. You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at " http://solutions.brother.com ". 2 If the problem persists, contact your - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 204
TROUBLESHOOTING d While holding the bobbin in place with your finger, pass the thread through the slit in the needle plate. * Hold down the bobbin with your - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 205
Troubleshooting TROUBLESHOOTING d Raise the lever. presser foot using the presser foot g While holding hand, pass the the thread in your right thread through the thread guide Position" button once or twice to raise the needle. h Guide the thread down, up, then down through the groove, - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 206
TROUBLESHOOTING Incorrect thread tension ■ Symptoms • Symptom 1: The lower thread is visible . □ Cause 2 A needle and thread appropriate for the fabric are not being used. The sewing machine needle that should be used depends on the type of fabric sewn and the thread thickness. If a needle - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 207
to complete it forcefully, contact your dealer or nearest authorized service center. ■ Removing the fabric from the machine h Remove Use the cleaning brush or a vacuum cleaner to remove any dust or loose threads from the race and its surrounding area. Maintenance and Troubleshooting - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 208
TROUBLESHOOTING , even after completing these steps, contact your dealer or nearest authorized service center. l Remove any threads the feed dogs. in the race tighten the screw on the side of the needle plate. Then, use the right disc-shaped screwdriver to firmly tighten the screw on the - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 209
the machine" on page A-24. Maintenance and Troubleshooting Note • If the needle plate has been THE NEEDLE" on page B-51. CAUTION • Never use bent needles. Bent needles can easily break, possibly therefore, contact your dealer or nearest authorized service center. f Turn off the machine, - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 210
TROUBLESHOOTING List of Symptoms Problem Cause Solution The thread is tangled on the wrong side of the fabric. Upper threading is incorrect. Using improper needle or thread for the selected fabric. Check the steps for threading the machine and rethread the machine. Check the "Fabric/Thread/ - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 211
TROUBLESHOOTING Problem Skipped stitches Needle breaks Fabric does not feed through the machine Fabric puckers Cause Solution Needle is turned, bent or the point is dull. Replace the needle. Using improper needle or thread for the selected fabric. Check the "Fabric/Thread/Needle Combination" - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 212
TROUBLESHOOTING Problem or fed at an angle Sew while guiding the fabric with your hands while it service center. After a while, the cloudiness will disappear. Before using the sensor pen for the first time, be sure to calibrate it. When using instructions for operating the machine correctly. A-28 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 213
If an error message displays, follow the instructions in the message. 2 Below is an explanation and cause injury. Maintenance and Troubleshooting Marks Error Messages Cause/Solution mode, the automatic needle threading button cannot be used. This message is displayed when the upper thread is - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 214
from the beginning. This message appears when the machine is in the shutoff support mode. Turn off the machine once to start the machine again. (see page S-94) This file exceeds the data capacity and cannot be used. Use a This message is displayed when the file size exceeds the data suitable - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 215
when you try to use incompatible USB media. For a list of compatible USB media, visit " http://solutions.brother.com ". This message the "Start/Stop" button is pushed. Use the foot controller to operate the machine. Maintenance and Troubleshooting A 2 SPECIFICATIONS Sewing Machine and Accessories - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 216
upgrade software for your sewing machine. When an upgrade program is available on " http://solutions.brother.com ", please download the files following the instructions on the website and steps below. Note • When using USB media to upgrade the software, check that no data other than the upgrade file - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 217
YOUR MACHINE'S SOFTWARE Upgrade Procedure Using Computer A a While pressing the "Automatic Threading" button, turn the main power to ON. 2 → The following screen will appear on the LCD. b Press . e When the message disappears, press . Maintenance and Troubleshooting c Plug the USB cable - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 218
character/decorative stitches S-78 Appliqu S-48 quilting S-38 using a zigzag stitch S-31 Arrow keys S-106 Automatic fabric machine casing A-15 race A-15 Combining Patterns character/decorative stitches S-89 Cord guide bobbin cover S-32 Crazy quilt S-32 D Darning S-58 Dart seam S-28 - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 219
S-3 Sewing type selection key B-32 Shelltuck stitches S-49 Shutoff support mode B-28 Single/Repeat sewing key S-86 Single/Triple stitching key Thread guide B-11 B-35, B-38, B-46 Thread guide plate B-11, B-38, B-42 Top cover B-11 Top stitching S-50 , Touch pen S-106 A-18 Troubleshooting A- - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 220
INDEX U Upgrading A-32 Upper threading twin needle mode B-45 using the "Automatic Threading" button B-42 using the spool net B-47 USB cable B-53, S-97, A-33 USB media recalling S-99 saving S-96 usable S-94 , USB mouse B-28 B-54 USB port connector , for - Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 221
- Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 222
- Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 223
- Brother International DreamWeaver„ VQ3000 | Users Manual - English - Page 224
Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs). English 882-D00 Printed in Taiwan XF3632-001
Operation Manual
Sewing Machine
Product Code: 882-D00
Be sure to read this document before using the machine.
We recommend that you keep this document nearby for future reference.