Brother International Entrepreneur Pro PR1000e KIT 1 OPERATION MANUAL - Englis
Brother International Entrepreneur Pro PR1000e Manual
View all Brother International Entrepreneur Pro PR1000e manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International Entrepreneur Pro PR1000e manual content summary:
- Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 1
Operation Manual Upgrade KITI - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 2
ALIGNING THE EMBROIDERY POSITION 3 CHANGING THE PATTERN SIZE WHILE MAINTAINING THE DESIRED THREAD DENSITY (STITCH RECALCULATOR)...6 FIND NEW COLOR SCHEMES WITH THE COLOR SHUFFLING FUNCTION 8 The Color Shuffling Function 8 Saving and Recalling the Custom Thread Table using USB media 10 USING THE - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 3
according to the procedure outlined in the Installation Guide. The machine can then be used as outlined in this upgrade Operation Manual. NEW FEATURES The following features will be activated with the upgrade for Kit I. • Positioning of the embroidery pattern can be aligned while displaying the - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 4
mm (W) (2 inches (H) × 5-1/8 inches (W)). • For details on using fabric thicker than 2 mm, refer to "Positioning the pattern on thick fabric" (page 5). a Hoop the fabric in the embroidery frame, and then attach the frame to the embroidery machine. b Select the pattern, and then press . Note - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 5
disappears or remains displayed can be specified from page 7/7 of the settings screen. a b c f Use to align the pattern with the desired embroidery position. • The pattern can be moved to the desired position by using your finger or the touch pen to drag the pattern displayed on the screen - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 6
. It will not affect embroidering if it is turned on with normal embroidery. a Hoop the fabric in the embroidery frame, and then attach the frame to the machine. b Select the pattern, and then press . f Affix the embroidery positioning sticker to the fabric within the area indicated by the red - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 7
to enter Stitch Recalculator mode Note • Be sure to sew trial embroidery using same fabric and threads as project in order to check the embroidering used, thread density is maintained while the pattern is enlarged/reduced. However, the needle drop point pattern is not entirely maintained. Use - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 8
on your project, be sure to embroider a trial sample on a piece of scrap fabric that is the same as the fabric used in the project, using the same needle and embroidery thread. • If the pattern is enlarged and there is space between stitches, a better effect can be achieved by increasing the thread - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 9
function, the machine suggests new color schemes for the embroidery pattern that you use the thread table (64 colors) instead or create colors in the custom thread table. Refer to "Creating a custom thread table" in the Operation Manual of the machine for the details. a Number of colors to be used - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 10
thread table" in the Operation Manual for the machine, about setting the colors using all the thread colors in the selected pattern by setting "PES Thread Code" to "OFF" in the Settings Screen. a a Press to review the previous schemes. Note • Maximum 10 pages of schemes can be reviewed. After 10 - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 11
the Custom Thread Table using USB media You can save a custom thread table data file to USB media, and then you can recall the saved data from USB media again. Refer to "Creating a custom thread table" in the Operation Manual of the machine, for the detailed instructions about a custom thread table - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 12
".pcp" data file in USB media. b Press and then press . c Press . → The "Saving" screen is displayed. When the data is loaded to the machine, the display returns to the original screen automatically. Note • Do not insert or remove USB media while "Saving" screen is displayed. You will lose - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 13
, cylinder frame or the round frames, you can not connect patterns using this function. • Split (Large-size) embroidery patterns cannot be used with this function. • You can not connect patterns using this function while the machine is set to the Link mode. Connecting Patterns Two patterns can be - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 14
CD. b Hoop fabric in the large embroidery frame (13 cm × 18 cm (5-1/8 inches × 7-1/8 inches)), and then attach the frame to the embroidery machine. a Pattern1.pes b Pattern2.pes c Pattern3.pes Memo • The patterns for practicing are contained in the "sample" folder in "manual" folder on - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 15
changes to . → The carriage will move. g Prepare two embroidery positioning stickers. We will follow the on-screen instructions to affix these two stickers to Brother dealer. If any other sticker is used, the camera may not recognize it. • The 182 mm × 257 mm (7 inches × 10 inches) embroidery - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 16
h Affix the first embroidery positioning sticker onto the fabric within the red lines by using both hands to press down on each corner of the sticker. Affix the sticker with the large circle to the top as shown on machine. Then, press . Note • Use new positioning stickers. If a sticker is - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 17
do not peel off, re-hoop the fabric so that the next pattern and the centers of the large circles of the two stickers are within the embroidering area. Check with the position using the embroidery sheet. After checking, attach the embroidery frame to the machine. a Pattern to be embroidered - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 18
and the centers of the large circles of the two positioning stickers do not fit within the embroidering area, use a larger embroidery frame. If a larger embroidery frame cannot be used, continue to step m, and then refer to "Changing the Position of a Sticker" on page 21 to reposition the sticker - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 19
the fabric so that the centers of the large circles of the positioning stickers are within the embroidering area or hoop the fabric in a larger embroidery frame. After checking that the area containing one of the two stickers have been correctly selected in step n, press . The message above also - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 20
the stickers behind the needles. p Before embroidering, hoop the fabric so that the next pattern and the centers of the large circles of the two stickers are within the embroidering area. Check the position using the embroidery sheet. After checking, attach the embroidery frame to the machine - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 21
t Select the third pattern for practicing [3], and press then . u When the pattern connection setting screen (screen for connecting the selected pattern to the previous one) appears, select the reference edge and reference point for connecting the third pattern with the second one, and then - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 22
will use the embroidery frame with a size of 10 cm × 10 cm (4 inches × 4 inches) to connect patterns as shown below. • To return to the embroidery settings Hoop fabric in the embroidery frame with a size of 10 cm × 10 cm (4 inches × 4 inches), and then attach the frame to the embroidery machine - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 23
d Press in the embroidery settings screen. e Select the reference edge and reference point for connecting this pattern to the next one. For this example, select the bottom point of - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 24
the machine's on-screen instructions until the two stickers are detected. For details, refer to steps g through i in "Practice (Connecting Three Patterns)" on page 13. a Pattern to be embroidered next b Centers of large circles for stickers c Embroidery sheet Note • When re-hooping the fabric - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 25
previous one) appears, press . • To return to the embroidery settings screen, press . p After the following message appears, select select the area containing one of the two stickers, when using the embroidery frame with the size of 10 × 10 cm (4 inches × 4 inches) as exampled in this procedure - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 26
when it's hard to reach the stickers behind the needles. s Hoop the fabric so that the next pattern and the centers for the large circles of the two marks are within the embroidering area, and then attach the embroidery frame to the machine. Note • If the stickers are re-affixed within or - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 27
, refer to page 18 to solve the problem. u Select the area containing one of the two stickers, and then press . • It is not necessary to select the area containing one of the two stickers, when using the embroidery frame with the size of 10 × 10 cm (4 inches × 4 inches) as exampled in this - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 28
along the smallest rectangle (not angled) that contains all patterns selected when the embroidery settings screen is displayed. Rectangles and angled patterns d Press to display the embroidery settings screen. e Press . f Select the reference edge and reference point for connecting this - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 29
to embroider the first pattern and re-hoop the fabric. h Select the pattern, and then press . i Press in the pattern editing screen. a j Rotate the pattern to the same angle as the first pattern, and then press . k Press to display the embroidery settings screen. l Select the reference - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 30
a Perform the procedure in "Practice (Connecting Three Patterns)" up to step m, and when the pattern connection setting screen (screen for connecting the selected pattern to the previous one) appears, press . (New setting) b Select the new reference edge and reference point for connecting the - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 31
then touch . • Press to remove the positioning stickers when it's hard to reach the stickers behind the needles. e Affix the first embroidery positioning sticker onto the fabric within the red lines by using both hands to press down on each corner of the sticker, and then press . Affix the - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 32
can be set up to ±99.9 mm. Note • The arrangement of patterns displayed in the screen may differ slightly from the actual embroidery. Use a ruler to measure the vertical and horizontal shifts before changing the settings. a b a First pattern b Second pattern i Continue with step n of "Practice - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 33
along an edge. Before connecting the patterns, the basting a function will be used to measure the distance that the pattern will be slid. b a First d are for measurement placement only. Be sure to sew trial embroidery using same fabric and threads as project in order to check the embroidering - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 34
to check that the pattern will be slid the correct distance. a Select the pattern, and then continue to the embroidery settings screen. b Press in the embroidery settings screen. c Select the reference edge and reference point for connecting this pattern to the next one. a → changes to - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 35
to steps e through k of "Practice (Connecting Three Patterns)" to embroider the first pattern and re-hoop the fabric. e Select the next pattern, and then continue to the embroidery settings screen. f When the pattern connection setting screen (screen for connecting the selected pattern to the - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 36
Troubleshooting and Quick Reference Chart If any problems Finish detecting marks. 8 Re-hoop the fabric. 9 Select the second pattern. 10 Select the reference point of fit within the embroidering area. With the embroidery frame remaining attached to the machine, select the next pattern, and then - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 37
connecting function is being used, the machine will return to the operation indicated below when it is turned on again. The machine operation will differ depending If the machine is turned off during any operation in this box, the machine will return to (B) when it is turned on again. È Re-hoop the - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 38
NEW PATTERNS Thumbnail List Embroidery patterns Alphabet patterns 37 - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 39
) (515) 39 (085) 184.4 mm 278.2 mm 1 Time required for embroidering 2 Embroidery thread color/ Embroidery thread color number 3 Embroidery size No. 02 No. 04 140 min 1 (001) 5 (017) 9 (323) 13 (517) 2 (817) 6 (209) 10 (030) 14 (707) 3 (812) 7 (348) 11 (330) 15 (058) 4 (205) 8 (513 - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 40
) 8 (509) 22 (019) 36 (810) 50 (086) 9 (086) 23 (001) 37 (086) 51 (019) 10 (209) 24 (612) 38 (810) 52 (810) 11 (086) 25 (209) 39 (017) 53 (612) 12 27 (001) 41 (019) 14 (017) 28 (810) 42 (209) 192.4 mm 350.8 mm 102 min 1 (339) 10 (517) 19 (328) 28 (208) 2 (030) 11 (208) 20 (339) 29 (001) 3 (808) 12 - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 41
■ Examples of Combinations No. 05 No. 08 No. 09 40 - Brother International Entrepreneur Pro PR1000e | KIT 1 OPERATION MANUAL - Englis - Page 42
English 111-001
Operation
Manual
Upgrade KIT
I