Brother International HL-4150CDN Users Manual - English

Brother International HL-4150CDN Manual

Get Brother International HL-4150CDN PDF manuals and user guides
UPC - 012502624998
View all Brother International HL-4150CDN manuals
Add to My Manuals
Save this manual to your list of manuals

Brother International HL-4150CDN manual content summary:

  • Brother International HL-4150CDN | Users Manual - English - Page 1
    Brother Laser Printer USER'S GUIDE HL-4150CDN HL-4570CDW HL-4570CDWT For visually-impaired users You can read this manual with Screen Reader 'text-to-speech' software. You must set up the hardware and install the driver before you can use the machine. Please use the Quick Setup Guide to set up the
  • Brother International HL-4150CDN | Users Manual - English - Page 2
    settings using Brother machine. You can also find supported protocol information for your machine and the detailed troubleshooting tips. Where is it? Printed / In the Box Printed / In the Box For USA: (HL-4150CDN) PDF file / Brother Solutions Center at http://solutions.brother.com/ (HL-4570CDW
  • Brother International HL-4150CDN | Users Manual - English - Page 3
    Using this guide Symbols used in this guide The following symbols and conventions are used throughout the damage to property or loss of product function. Hot Surface icons warn you not to touch machine parts that are hot. Note Notes tell you how you should respond to a situation that may arise
  • Brother International HL-4150CDN | Users Manual - English - Page 4
    ...19 Manual duplex printing ...21 Printing data from a USB flash memory drive with direct print 22 Supported file formats ...22 Direct Print default settings...22 Creating a PRN or PostScript® 3™ file for direct printing 23 Printing data directly from the USB flash memory drive 24 2 Driver and
  • Brother International HL-4150CDN | Users Manual - English - Page 5
    82 Manual Registration...83 Frequency...83 4 Option 84 Lower tray (LT-300CL)...84 SO-DIMM...85 SO-DIMM types ...85 Installing extra memory ...86 5 Routine Maintenance 88 Replacing consumable items...88 Before replacing the consumable items 92 Toner cartridges ...95 Drum unit ...100 Belt unit
  • Brother International HL-4150CDN | Users Manual - English - Page 6
    (Web browser 178 Symbol and character sets list...179 Quick reference for bar code control commands 180 Print bar codes or expanded characters 180 B Appendix (for Europe and Other Countries) 188 Brother numbers ...188 C Appendix (for USA and Canada) 189 Brother numbers ...189 D Index 192
  • Brother International HL-4150CDN | Users Manual - English - Page 7
    this Machine Front view and Back view 1 8 10 2 3 11 4 7 5 6 9 1 Face-down output tray support flap (support flap) 2 Control panel with a tiltable Liquid Crystal Display (LCD) 3 USB direct print interface 4 Front cover release button 5 Front cover 6 Paper tray 7 Power switch 8 Face-down output
  • Brother International HL-4150CDN | Users Manual - English - Page 8
    machine feeds paper from the installed paper trays. The names for the paper trays in the printer driver and this guide are as follows: Paper tray Optional lower tray unit (Standard equipment for HL-4570CDWT) Multi-purpose tray Duplex unit for automatic duplex printing Tray 1 Tray 2 MP Tray DX 2
  • Brother International HL-4150CDN | Users Manual - English - Page 9
    Methods When looking at this page, you can jump to the page for each printing method by clicking p in the table. Media type Tray 1 Tray 2 MP Tray DX Choose the media type 1 from the printer driver Plain paper Plain Paper p p p p 75 g/m2 to 105 g/m2 (20 to 28 lb) Recycled paper
  • Brother International HL-4150CDN | Users Manual - English - Page 10
    Printing Methods Recommended paper specifications The following paper specifications are suitable for this machine. 1 1 Basis weight Thickness Roughness Stiffness Grain direction Volume resistivity Surface resistivity Filler
  • Brother International HL-4150CDN | Users Manual - English - Page 11
    or folded • that exceeds the recommended weight specification in this guide • with tabs and staples • with letterheads using low temperature printing If you use any of the types of paper listed above, they may damage your machine. This damage is not covered under any Brother warranty or service
  • Brother International HL-4150CDN | Users Manual - English - Page 12
    Methods Envelopes 1 Most envelopes designed for laser printers will be suitable for your machine. However, some envelopes may have feed and print-quality problems because of the way they have been made. A suitable envelope should 1 have edges with straight, well-creased folds and the leading
  • Brother International HL-4150CDN | Users Manual - English - Page 13
    Brother warranty or service agreement. Labels 1 The machine will print on most types of labels designed for use with a laser unit. Adhesives should not come in contact with any part of the machine, because the label stock may stick to the drum unit or rollers and cause jams and print quality problems
  • Brother International HL-4150CDN | Users Manual - English - Page 14
    that cannot be printed on may vary depending on the paper size and the printer driver you are using. The unprintable area shown below is for A4 / Letter size paper. Portrait 1 Landscape 1 2 2 4 3 Windows® Printer Driver and Macintosh printer driver BRScript Printer Driver for Windows® and
  • Brother International HL-4150CDN | Users Manual - English - Page 15
    Printing Methods Printing methods Printing on plain paper Printing on plain paper from the Tray 1 and Tray 2 (For the recommended paper to use, see Type and size of paper on page 2.) a Pull the paper tray completely out of the machine. 1 1 1 1 WARNING DO NOT touch the shaded parts shown in the
  • Brother International HL-4150CDN | Users Manual - English - Page 16
    . 1 c Put paper in the tray and make sure:  The paper is below the maximum paper mark (b b b) (1). Over filling the paper tray will cause paper jams.  The side to be printed on must be face down.  The paper guides touch the sides of the paper so it will feed properly. 1 d Put the paper tray
  • Brother International HL-4150CDN | Users Manual - English - Page 17
    Printing Methods e Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page as soon as it comes out of the machine. 1 f Choose the following settings from each drop-down list of the printer driver.  Paper Size A4 Letter Legal Executive B5 B6
  • Brother International HL-4150CDN | Users Manual - English - Page 18
    Methods Printing on plain paper, bond paper, thick paper, labels or glossy paper from the MP tray 1 (For the recommended paper to use, see Type and size of paper on page 2.) 1 a Open the MP tray and lower it gently. b Pull out the MP tray support and unfold the flap (1). 1 c Lift up the support
  • Brother International HL-4150CDN | Users Manual - English - Page 19
    paper stays under the maximum paper mark (1).  The paper edge positions between the arrows (2). 1  The side to be printed on must be face up with -guide release lever, slide the paper guide to fit the paper size. f Choose the following settings from each drop-down list of the printer driver.
  • Brother International HL-4150CDN | Users Manual - English - Page 20
    Printing Methods  Media Type Plain Paper Bond Paper  Paper Source Thin Paper Label Thick Paper Glossy Paper Thicker Paper MP Tray For any other settings, see Driver and Software in Chapter 2. g Send the print data to the machine. Recycled Paper 1 14
  • Brother International HL-4150CDN | Users Manual - English - Page 21
    Printing Methods Printing on envelopes (For the recommended paper to use, see Type and size of paper on page 2.) a Open the MP tray and lower it gently. 1 1 b Pull out the MP tray support and unfold the flap (1). 1 c Lift up the support flap to prevent envelopes from sliding off the face-down
  • Brother International HL-4150CDN | Users Manual - English - Page 22
    d Put envelopes in the MP tray and make sure:  The envelopes stay under the maximum paper mark (1).  The envelope edge positions between the arrows (2).  The side to be printed on must be face up. 1 1 2 Note Do not put more than 3 envelopes in the MP tray at any one time, as it may
  • Brother International HL-4150CDN | Users Manual - English - Page 23
    Size (for BR-Script printer driver for Windows®) or Custom Page Sizes (for Macintosh printer driver). For more information on envelope sizes, see Paper size on page 177. i Send the print data to the machine. j When you have finished printing, open the back cover and reset the two gray levers their
  • Brother International HL-4150CDN | Users Manual - English - Page 24
    for Windows® 2000 or greater and Mac OS X 10.4.11 or greater all enable duplex 1 printing. For more information about how to choose the settings, see the Help text in the printer driver. Guidelines for printing on both sides of the paper 1  If the paper is thin, it may wrinkle.  If paper is
  • Brother International HL-4150CDN | Users Manual - English - Page 25
    If you are using the Macintosh Printer Driver, see Automatic Duplex Printing on page 58. 1 1 Automatic duplex printing with the Windows® printer driver 1 a Choose the following settings from each menu of the printer driver.  Paper Size Letter  Media Type Legal Folio Plain Paper  Paper
  • Brother International HL-4150CDN | Users Manual - English - Page 26
    duplex printing with the BR-Script printer driver for Windows® a Choose the following settings from each menu of the printer driver.  Paper Size 1 1 Letter  Media Type Legal Folio Plain Paper  Paper Source Recycled Paper Thin Paper Glossy Paper (MP Tray only) Tray 1 MP Tray  Print
  • Brother International HL-4150CDN | Users Manual - English - Page 27
    Printing Methods Manual duplex printing The BR-Script printer driver for Windows® does not support manual duplex printing. If you are using the Macintosh Printer Driver, see Manual Duplex Printing on page 57. 1 1 Manual duplex printing with the Windows® printer driver 1 a Choose the following
  • Brother International HL-4150CDN | Users Manual - English - Page 28
    USB flash memory drives that will not work with the machine. Supported file formats 1 Direct print supports the following file formats:  PDF version 1.7 1  JPEG  Exif+JPEG  PRN (created by HL-4150CDN or HL-4570CDW(T) printer driver)  TIFF (scanned by all MFC or DCP Brother models)  PostScript
  • Brother International HL-4150CDN | Users Manual - English - Page 29
    3™ file for direct printing a From the menu bar of an application, click File, then Print. b Choose your machine model name (1) and check the Print to file box (2). Click Print. 1 2 1 1 If you have a USB flash memory drive connected to your computer, you can save the file directly to the USB flash
  • Brother International HL-4150CDN | Users Manual - English - Page 30
    data directly from the USB flash memory drive 1 If you print data from the USB flash memory drive with Secure Function Lock 2.0 enabled, see Chapter 6 of 1 the Network User's Guide for more information about Secure Function Lock 2.0. a Connect your USB flash memory drive to the USB Direct Interface
  • Brother International HL-4150CDN | Users Manual - English - Page 31
    Go. Printing Default settings Print File Set Paper Size Print File Set Media Type Print File Set Multiple Page Print File Set Orientation 1 1 Print File Set Output Color Print File Set Duplex Print File Set PDF Option Print File Set Print Quality Print File Set Tray Use Print File Set
  • Brother International HL-4150CDN | Users Manual - English - Page 32
    (PDL). The printer drivers for the supported versions of Windows® and Macintosh are on the CD-ROM we have supplied or on the Brother Solutions Center at http://solutions.brother.com/. Install the drivers by following the Quick Setup Guide. The latest printer driver can be downloaded from the
  • Brother International HL-4150CDN | Users Manual - English - Page 33
    following printer settings when you print from your computer:  Paper Size  Orientation  Copies 2  Media Type  Print Quality  Color / Mono  Multiple Page  Duplex 4 / Booklet 2 4  Paper Source  Scaling  Reverse Print  Use Watermark 1 2  Header-Footer Print 1 2  Toner Save
  • Brother International HL-4150CDN | Users Manual - English - Page 34
    read HL-4570CDW as HL-4570CDWT. Basic tab 2 You can also change Page Layout settings by clicking the illustration on the left side of the Basic tab. 1 4 2 3 a Choose the Paper Size, Orientation, Copies, Media Type, Print Quality and Color / Mono (1). b Choose Multiple Page and Duplex / Booklet
  • Brother International HL-4150CDN | Users Manual - English - Page 35
    Driver and Software Paper Size From the drop-down list choose the Paper Size you are using. Orientation Orientation selects the position of how your document will be printed (Portrait or Landscape). Portrait Landscape 2 2 2 Copies 2 The copies selection sets Envelopes. If the toner is not fixed
  • Brother International HL-4150CDN | Users Manual - English - Page 36
    areas can actually be made from a combination of colors). • If either the Cyan, Magenta or Yellow toner reaches the end of its life while printing a color document, the print job cannot be completed. You can choose to start the print job again in Mono mode, as long as black toner is available. 30
  • Brother International HL-4150CDN | Users Manual - English - Page 37
    This is the default color mode. • Vivid The color of all elements are adjusted to become a more vivid color. • Auto The printer driver automatically selects the Color Mode type. • None  Import You can adjust the print configuration of a particular image by clicking Settings. When you have
  • Brother International HL-4150CDN | Users Manual - English - Page 38
    printing.  Duplex / Duplex (Manual) When you want to do duplex printing, use these options. • Duplex The machine prints on both sides of the paper automatically. • Duplex (Manual) The machine prints all the even numbered pages first. Then the printer driver will stop and show the instructions
  • Brother International HL-4150CDN | Users Manual - English - Page 39
    printer driver will stop and show the instructions required to re-install the paper. When you click OK the odd numbered sides will be printed. When you choose Booklet or Booklet (Manual), the Duplex Settings... button becomes available to choose. You can set following settings in the Duplex Settings
  • Brother International HL-4150CDN | Users Manual - English - Page 40
    Driver and Software • Duplex Type There are two types of duplex binding direction available for each orientation. Portrait Left Binding Right Binding Landscape Top Binding Bottom Binding 2 • Booklet Printing Method When Divide into Sets is selected: This option allows you to print the whole
  • Brother International HL-4150CDN | Users Manual - English - Page 41
    Driver and Software Advanced tab Change the tab settings by clicking one of the following icons:  Scaling (1)  Reverse Print (2)  Use Watermark (3)  Header-Footer Print (4)  Toner Save Mode (5)  Secure Print (6)  Administrator (7)  User Authentication (8)  Other Print Options... (9) Scaling
  • Brother International HL-4150CDN | Users Manual - English - Page 42
    put it anywhere you like on the page. 2 When you use text as a watermark, you can change the font, color and angle settings. Header-Footer Print 2 When this feature is enabled, it will print the date and time on your document from your computer's system clock and the PC login user name or the
  • Brother International HL-4150CDN | Users Manual - English - Page 43
    Driver and Software Administrator Administrators have the authority to limit access to functions such as scaling and watermark.  Copies Lock Lock the copy pages selection to prevent multiple copy printing.  Multiple Page & Scaling Lock Lock the scaling setting and multiple page setting.  Color /
  • Brother International HL-4150CDN | Users Manual - English - Page 44
    data from your machine. Note If you print by using the Direct Print feature or BR-Script printer driver, you need to perform the calibration from the control panel. See Color Calibration on page 82. Use Reprint 2 The machine keeps the print job sent to it in memory. You can reprint the last job
  • Brother International HL-4150CDN | Users Manual - English - Page 45
    2 This feature allows you to improve a print quality problem.  Reduce Paper Curl If you choose this setting, the paper curl may be reduced. If you are printing only a few pages, you do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to a thin
  • Brother International HL-4150CDN | Users Manual - English - Page 46
    Driver and Software Accessories tab Note From the Start menu, select Control Panel and then Printers and Faxes 1. Right-click the Brother HL-4570CDW (HL-4150CDN) Series icon and select Properties to access the Accessories tab. 1 Printers shows the available settings in the printer driver. When you
  • Brother International HL-4150CDN | Users Manual - English - Page 47
    Support in the Printing Preferences dialog box. 1 2 3 4 5 6  Brother Solutions Center... (1) The Brother Solutions Center (http://solutions.brother.com/) is a Web site offering information about your Brother product including FAQs (Frequently Asked Questions), User's Guides, driver updates
  • Brother International HL-4150CDN | Users Manual - English - Page 48
    2 Note You can access the Printing Preferences dialog box by clicking Printing Preferences... in the General tab of the Brother HL-4570CDW (HL-4150CDN) BR-Script3 Properties dialog box.  Layout tab You can change the layout setting by choosing the settings for Orientation, Print on Both Sides, Page
  • Brother International HL-4150CDN | Users Manual - English - Page 49
    booklet style automatically when you choose Booklet.  Paper/Quality tab 2 Choose the Paper Source and Color. • Paper Source You can choose Automatically Select, Auto Select, Tray1, Tray2, MP Tray or Manual Feed. • Color Choose how to print color graphics either in Black & White or Color. 43
  • Brother International HL-4150CDN | Users Manual - English - Page 50
    ) to use equivalent printer fonts for printing documents that contain TrueType fonts. This will permit faster printing; however, you might lose special characters not supported by the printer font. Click Download as Softfont to download TrueType fonts for printing instead of using printer fonts. 44
  • Brother International HL-4150CDN | Users Manual - English - Page 51
    Driver and Software c You can change settings by choosing a setting in the Printer Features list (3): 2 3  Print Quality You can choose the following print quality settings. • Normal (600 x 600 dpi) 600×600 dpi. Recommended for ordinary printing. Good print quality with reasonable print speeds. •
  • Brother International HL-4150CDN | Users Manual - English - Page 52
    Toner Save for printing Photo or gray scale images.  Sleep Time [Min.] When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep mode, the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will be reset
  • Brother International HL-4150CDN | Users Manual - English - Page 53
    This feature allows you to improve a print quality problem. • Reduce Paper Curl If you choose this setting, the paper curl may be reduced. If you are printing only a few pages, you do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to a thin
  • Brother International HL-4150CDN | Users Manual - English - Page 54
    Driver and Software Ports tab 2 Choose the port where your machine is connected or the path to the network machine you are using. 2 48
  • Brother International HL-4150CDN | Users Manual - English - Page 55
    • For HL-4570CDWT users, please read HL-4570CDW as HL-4570CDWT. Choosing page setup options 2 a From an application such as Apple TextEdit, click File, then Page Setup. Make sure HL-XXXX (where XXXX is your model name) is chosen in the Format for pop-up menu. You can change the settings for Paper
  • Brother International HL-4150CDN | Users Manual - English - Page 56
    Driver and Software  For Mac OS X 10.5.x and 10.6.x For more page setup options, click the disclosure triangle beside the Printer pop-up menu. 2 Choosing printing options 2 To control special printing features, choose the options in the Print dialog box. For the details of available options, see
  • Brother International HL-4150CDN | Users Manual - English - Page 57
    Driver and Software Cover Page You can make the following cover page settings: 2 2  Print Cover Page If you want to add a cover page to your document, use this function.  Cover Page Type Choose a template for the cover page.  Billing
  • Brother International HL-4150CDN | Users Manual - English - Page 58
    Driver and Software  Border If you want to add a border, use this function.  Two-Sided If you want to do duplex printing, choose Long-edge binding or Short-edge binding.  Reverse Page Orientation (Mac OS X 10.5.x and 10.6.x only) Check Reverse Page Orientation to reverse the data
  • Brother International HL-4150CDN | Users Manual - English - Page 59
    Driver and Software Print Settings You can change settings by choosing a setting in the Print Settings list: Basic tab 2 2  Media Type You can change the media type to one of the following: • Plain Paper • Thin Paper • Thick Paper • Thicker Paper • Bond
  • Brother International HL-4150CDN | Users Manual - English - Page 60
    its life while printing a color document, the print job cannot be completed. You can choose to start the print job again in Mono mode, as long as black toner is available.  Toner Save Mode You can conserve toner use with this feature. When you set Toner Save Mode to On, print appears lighter. The
  • Brother International HL-4150CDN | Users Manual - English - Page 61
    vivid color. • None  Enhance Black Printing If a black graphic cannot be printed correctly, choose this setting.  Improve Gray Color You can improve the image quality of shaded areas by checking the Improve Gray Color check box.  Skip Blank Page If Skip Blank Page is checked, the printer driver
  • Brother International HL-4150CDN | Users Manual - English - Page 62
    If you are printing only a few pages, you do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to a thin setting. Note This operation makes the temperature of the machine's fusing process lower. 2 • Improve Toner Fixing If you choose
  • Brother International HL-4150CDN | Users Manual - English - Page 63
    Driver and Software Manual Duplex Printing  For Mac OS X 10.4.11 a Select Paper Handling. b Choose Reverse (for MP tray) or Normal (for Tray 1 and Tray 2) in Page Order. Then choose Even numbered pages and click Print. 2 2 c Reload printed paper into the tray with the blank side facing up (for
  • Brother International HL-4150CDN | Users Manual - English - Page 64
    Driver and Software Automatic Duplex Printing  For Mac OS X 10.4.11 a Select Layout. b Choose Long-edged binding or Short-edged binding in Two-Sided. 2 2 c Select Paper Handling. d Choose All Pages and click Print. 58
  • Brother International HL-4150CDN | Users Manual - English - Page 65
    Driver and Software  For Mac OS X 10.5.x and 10.6.x a Select Layout. b Choose Long-edge binding or Short-edge binding in Two-Sided. Automatically the Two-Sided check box is checked. 2 c Select Paper Handling. d Choose All pages in Pages To Print and click Print. You can print pages on both
  • Brother International HL-4150CDN | Users Manual - English - Page 66
    Driver and Software Status Monitor 2 This reports the machine status (any errors that may happen with the machine) when printing. If you would like to turn Status Monitor on, follow these steps:  For Mac OS X 10.4.11 2 a Run the Printer Setup Utility (from the Go menu, choose Applications,
  • Brother International HL-4150CDN | Users Manual - English - Page 67
    , point to All Programs 1, Brother, and then to your machine name. b Click UnInstall. c Follow the instructions on the screen. 1 Program for Windows® 2000 users Printer driver for Macintosh 2 For Mac OS X 10.4.11 2 a Log in as an 'Administrator'. b Run the Printer Setup Utility (from the Go menu
  • Brother International HL-4150CDN | Users Manual - English - Page 68
    be tilted up to a vertical position. You can adjust the angle of the LCD by tilting it up or down. 3 The illustration is based on HL-4570CDW. 62
  • Brother International HL-4150CDN | Users Manual - English - Page 69
    last menu level. After changing a setting, the machine returns to the Ready state. If Data remains in the machine memory, pressing Go will print that remaining data. You can clear some error indications by pressing Go. Follow the control panel instructions or see Troubleshooting on page 139 to clear
  • Brother International HL-4150CDN | Users Manual - English - Page 70
    Printing Secure data on page 69. + or - button 3 Moving through menus on the LCD 3 Pressing + or - when the machine is in the Ready state, takes it offline and the LCD will show the control panel menu. Press to scroll through the menus and options. Press the button until you see the setting setting,
  • Brother International HL-4150CDN | Users Manual - English - Page 71
    . Data LED (Green) LED indication On Blinking Off Meaning Data is in the machine memory. Receiving or processing data. No remaining data in the memory. Error LED (Orange) LED indication Blinking Off Meaning There is a problem with the machine. There is no problem with the machine. 3 3 3 3 65
  • Brother International HL-4150CDN | Users Manual - English - Page 72
    of its life. When the replacement of a toner cartridge becomes necessary, corresponding o mark disappears. The mark indicates the wireless signal strength with four levels. ( means no signal, means weak, means middle, and means strong.) (HL-4570CDW(T) only) When an error has occurred, the type of
  • Brother International HL-4150CDN | Users Manual - English - Page 73
    using the PS driver. The machine process. Printing. Ready to print. In HL-4570CDW(T) only) When the Wireless Network is enabled the machine does not transfer to Deep Sleep mode. If you want to disable the Wireless Network, change setting of the WLAN Enable to Off. (See Network for HL-4570CDW
  • Brother International HL-4150CDN | Users Manual - English - Page 74
    's Guide. • If the machine does not have enough memory to spool the print job data, it will not print the document. • If you wait 30 seconds to continue the control panel operation, the LCD leaves the Reprint setting automatically. • For more information about the settings in the printer driver, see
  • Brother International HL-4150CDN | Users Manual - English - Page 75
    more information about the settings in the printer driver and how to create secure data, see Secure Print on page 36 (For Windows® printer driver), Advanced options on page 44 (For Windows® BR-Script printer driver) or Secure Print on page 52 (For Macintosh printer driver). How to print Secure data
  • Brother International HL-4150CDN | Users Manual - English - Page 76
    Menu Selections Options Print Settings Print NetSetting Print WLANReport (HL-4570CDW(T) only) Test Print Demo Print Drum Dot Print Print Font HP LaserJet BR-Script 3 Serial No. Version Main Version Sub Version RAM Size Page Count Total Color Monochrome Image Count Black(K) Cyan
  • Brother International HL-4150CDN | Users Manual - English - Page 77
    left to print with the laser unit. Resets the drum unit life. Appears when you replace the drum unit. Resets the belt unit life. Appears when you replace the belt unit. The factory settings are shown in Bold with an asterisk. Paper Tray Submenu Tray Use Manual Feed Priority MP First Duplex MP
  • Brother International HL-4150CDN | Users Manual - English - Page 78
    Setup Submenu Local Language Ecology Panel Control Setting Lock Reprint Interface Menu Selections Sleep Time Toner Save toner 3 cartridge. 0.1*/0.4/0.6/0.8/1.0/ 1.4/1.8/2.0 Sec Sets the time for the LCD message to change when holding + or - at intervals. Level 1*/Level 2.../Level 10 Sets
  • Brother International HL-4150CDN | Users Manual - English - Page 79
    On Chooses whether to automatically clear the removable error. Auto*/Color/Mono Sets the output color. Plain Paper*/ Thick Paper/ Thicker Paper +500 (right) dots in 300 dpi. -500/-499.../0*.../499/ 500Dots Moves the print start position (at the top-left corner of pages) vertically up to -500 (
  • Brother International HL-4150CDN | Users Manual - English - Page 80
    Right Margin Top Margin ## ## #.## Bottom Margin #.## Lines ### BR-Script 3 Error Print CAPT On*/Off Off*/On The factory settings are shown in Bold with an asterisk. Descriptions Sets the symbol set or the character set. 3 Prints code table. If Change Emulation appears on the LCD, choose
  • Brother International HL-4150CDN | Users Manual - English - Page 81
    HL-4150CDN -local address range. 1 Ethernet Status MAC Address Network Reset IPv6 Off*/On Sets use of IPv6 protocol. Auto*/100B-FD/100B-HD/ of the machine. Restores all network settings of the internal print server to the factory default. The factory settings are shown in Bold with an asterisk
  • Brother International HL-4150CDN | Users Manual - English - Page 82
    Control Panel Network for HL-4570CDW(T) users Submenu 1 Submenu 2 Menu Selections Options link status. MAC Address Shows MAC address of the machine. Set to Default Restores wired network settings of the internal print server to the factory default. Wired Enable On*/Off Chooses Ethernet
  • Brother International HL-4150CDN | Users Manual - English - Page 83
    the IP address from the link-local address range. 1 Enables or Disables the IPv6 protocol. Configures the wireless network settings using the setup wizard. Configures the wireless network settings using WPS or AOSS™ method. Configures the wireless network settings using WPS with a PIN code. 77
  • Brother International HL-4150CDN | Users Manual - English - Page 84
    machine's control panel. Reset Menu Display Shows Network Reset Printer Factory Reset 3 Description Restores all network settings of the internal print server to the factory default. Resets the machine and restores all printer settings (including command settings) to settings you have previously
  • Brother International HL-4150CDN | Users Manual - English - Page 85
    Control Panel Color Correction Submenu Frequency Menu Selections ColorCalibration Calibrate Options Normal*/Low/Off Reset Auto Regist. Registration Manual Regist. Print Chart Set Registration 1 Magenta Left 2 Cyan Left 3 Yellow Left 4 Magenta Center 5 Cyan Center 6 Yellow Center 7 Magenta
  • Brother International HL-4150CDN | Users Manual - English - Page 86
    or landscape orientation. Sets use of collation printing. Sets the quality of print. Sets the information you want to add to the document. Sets the format of the index for direct print. If you choose Details, printing time will be longer. (See Printing data from a USB flash memory drive with direct
  • Brother International HL-4150CDN | Users Manual - English - Page 87
    + to choose Yes. The machine will restart automatically. Factory Reset 3 You can partially reset the machine back to its default printer settings. The settings that will not be reset are the Interface, Local Language, Reprint, Set Registration, Setting Lock, Secure Function Lock 2.0 and the Network
  • Brother International HL-4150CDN | Users Manual - English - Page 88
    . The default settings are on. See 3 Color Calibration on page 38. If you print using the Macintosh printer driver, you need to d Press + to choose Yes. Reset 3 You can reset the calibration parameters back to those set at the factory. a Press + or - to choose Color Correction. Press OK. b Press
  • Brother International HL-4150CDN | Users Manual - English - Page 89
    3 When you manually set the color registration, you need to print the color registration chart. Then you are required to set parameters to the machine in accordance with the instruction of the color registration chart. Print Chart You can print the color registration chart to manually check the
  • Brother International HL-4150CDN | Users Manual - English - Page 90
    1 LT-300CL SO-DIMM memory 4 See Lower tray (LT-300CL) on this page. See SO-DIMM on page 85. 1 HL-4570CDWT is equipped with the lower tray lower tray unit, call the dealer you bought the machine from or Brother Customer Service. For setup, see the User's Guide that we have supplied with the
  • Brother International HL-4150CDN | Users Manual - English - Page 91
    128 MB of standard memory and one slot for optional memory expansion. You can increase the memory up to a maximum of 384 MB by installing one SO-DIMM (Small Outline Dual In-line Memory Module). SO-DIMM types , call the dealer you bought the machine from or Brother Customer Service. 4 4 85
  • Brother International HL-4150CDN | Users Manual - English - Page 92
    Option Installing extra memory 4 Note Always turn off the machine power switch before installing hold it by its edges. IMPORTANT To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board surface. d Hold the SO-DIMM by the edges and align the notches in the
  • Brother International HL-4150CDN | Users Manual - English - Page 93
    the machine back in, and then turn on the power switch. Note To make sure that you have installed the SO-DIMM properly, you can print the printer settings page that shows the current memory size. (See Machine Info. on page 70.) 87
  • Brother International HL-4150CDN | Users Manual - English - Page 94
    over. You can replace the following consumable items by yourself: Toner cartridge Drum unit See Toner cartridges on page 95. See Drum unit on page 100. Order No. TN-310BK, TN-315BK, TN-310C, TN-315C, TN-310M, TN-315M, TN-310Y, TN-315Y Order No. DR-310CL 5 Belt unit See Belt unit on page 105
  • Brother International HL-4150CDN | Users Manual - English - Page 95
    WT Box End Soon Consumable item to replace Toner cartridge, Black Toner cartridge, Cyan Toner cartridge, Magenta Approximate life 2,500 pages 1 2 6 6,000 pages 1 2 7 1,500 pages 1 2 6 3,500 pages 1 2 7 Toner cartridge, Yellow Drum unit Belt unit Waste toner box 25,000 pages 1 3 4 50,000 pages
  • Brother International HL-4150CDN | Users Manual - English - Page 96
    Open the Front Cover, replace Toner Cartridge. Yellow (Y) Replace Drum Drum unit Drum Stop Drum unit Replace Belt Belt unit Replace WT Box Waste toner box Replace the Waste Toner Box. Refer to the User's Guide for instructions. Approximate life 2,500 pages
  • Brother International HL-4150CDN | Users Manual - English - Page 97
    your dealer or Brother Customer Service for a replacement PF kit2. Call your dealer or Brother Customer Service for a replacement laser unit. 5 Note • Go to http://www.brother.com/original/index.html for instructions on how to return the used toner cartridge to the brother collection program. If
  • Brother International HL-4150CDN | Users Manual - English - Page 98
    instructions before replacing the consumable items. WARNING DO NOT put a toner cartridge and waste toner Brother supplies. • Put the toner cartridge in the drum unit immediately after you have removed the protective cover. To prevent any degradation to the print quality, DO NOT touch the shaded parts
  • Brother International HL-4150CDN | Users Manual - English - Page 99
    touch the electrodes shown in the illustration. 5 • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. • We recommend that you clean the machine when you replace the consumables. See Cleaning on page 114. • DO NOT
  • Brother International HL-4150CDN | Users Manual - English - Page 100
    Note • Be sure to seal up the toner cartridge tightly in a suitable bag so that toner powder does not spill out of the cartridge. • Go to http://www.brother.com/original/index.html for instructions on how to return the used toner cartridge to the brother collection program. If you choose not to
  • Brother International HL-4150CDN | Users Manual - English - Page 101
    , you need to replace the toner cartridge. Replace Toner Open the Front C The second line of the LCD indicates which color you need to replace. The machine will stop printing until you replace the toner cartridge. A new and unused genuine Brother toner cartridge will reset the Replace Toner mode. 95
  • Brother International HL-4150CDN | Users Manual - English - Page 102
    the toner cartridges 5 Before you replace the toner cartridges, see Before replacing the consumable items on page 92. a Make sure that the machine is turned on. Press the front cover release button and then open the front cover. 5 b Hold the green handle of the drum unit. Pull the drum unit out
  • Brother International HL-4150CDN | Users Manual - English - Page 103
    Routine Maintenance d Push to release the latches of the corona wire cover (1), and then open the cover. 5 1 e Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. 1 Note Be sure to return the tab to the
  • Brother International HL-4150CDN | Users Manual - English - Page 104
    Routine Maintenance f Close the corona wire cover. 5 g Repeat steps d to f to clean each of three remaining corona wires. h Unpack the new toner cartridge. Gently shake it from side to side several times to distribute the toner evenly inside the cartridge. i Pull off the protective cover. 98
  • Brother International HL-4150CDN | Users Manual - English - Page 105
    match the toner cartridge color to the same color label on the drum unit. Repeat this for all the toner cartridges. C M Y K k Push the drum unit in until it stops. 5 C - Cyan M - Magenta Y - Yellow K - Black l Close the front cover of the machine. Note After replacing the toner cartridge, DO NOT
  • Brother International HL-4150CDN | Users Manual - English - Page 106
    drum unit. If you don't, printed pages may have a vertical stripe or Drum Error may occur. (See Cleaning the corona wires on page 120.) Replace Drum message 5 Replace Drum The drum unit has exceeded its rated life. Please replace the drum unit with a new one. We recommend a genuine Brother drum unit
  • Brother International HL-4150CDN | Users Manual - English - Page 107
    the print quality. Please replace the drum unit with a new one. We recommend a genuine Brother drum unit be installed at this time. After replacement, reset the drum counter by following the instructions included with the new drum unit. Replacing the drum unit 5 Before you replace the drum unit
  • Brother International HL-4150CDN | Users Manual - English - Page 108
    handles of the drum unit, lift the front of the drum unit and remove it from the machine. 1 5 d Hold the handle of the toner cartridge and slightly push it to unlock. Then pull it out of the drum unit. Repeat this for all the toner cartridges. e Unpack the new drum unit and remove the protective
  • Brother International HL-4150CDN | Users Manual - English - Page 109
    of the toner cartridge and slide it into the appropriate colored section of the drum unit until it clicks into place. C M Y K 5 C - Cyan M - Magenta Y - Yellow K - Black g Make sure the green lock lever (1) is in the release position as shown in the illustration. 1 h Match the guide ends (2) of
  • Brother International HL-4150CDN | Users Manual - English - Page 110
    you replace the drum unit with a new one, you need to reset the drum counter by completing the following steps: a Press + or - to choose Machine Info.. Press OK. b Press + or - to choose Reset Parts Life. Press OK. c Press + to choose Drum Unit. Press OK. d Press + to reset the drum unit counter
  • Brother International HL-4150CDN | Users Manual - English - Page 111
    A new belt unit can print approximately 50,000 A4 or Letter size single-sided pages. Belt End Soon message 5 Belt End Soon If the LCD shows Belt End Soon, it means the belt unit is near the end of its life. Buy a new belt unit and have it ready before you get a Replace Belt message. Replace Belt
  • Brother International HL-4150CDN | Users Manual - English - Page 112
    lever (1) at the left of the machine counterclockwise to the release position. Holding 5 the green handles of the drum unit, lift the front of the drum unit and remove it from the machine. 1 d Hold the green handle of the belt unit with both hands and lift the belt unit up, then pull it out. 106
  • Brother International HL-4150CDN | Users Manual - English - Page 113
    Unpack the new belt unit and put the new belt unit in the machine. Make sure the belt unit is level and fits firmly into place. f Make sure the green lock lever (1) is in the release position as shown in the illustration. 5 1 g Match the guide ends (2) of the drum unit to the c marks (1) on both
  • Brother International HL-4150CDN | Users Manual - English - Page 114
    the drum unit in until it stops. 5 j Close the front cover of the machine. When you replace the belt unit with a new one, you need to reset the belt unit counter by completing the following steps: a Press + or - to choose Machine Info.. Press OK. b Press + or - to choose Reset Parts Life. Press
  • Brother International HL-4150CDN | Users Manual - English - Page 115
    Box End Soon If the LCD shows WT Box End Soon, it means the waste toner box is near the end of its life. Buy a new waste toner box and have it ready before you get a Replace WT Box message. Replace WT Box message 5 5 When the following message appears on the LCD, you need to
  • Brother International HL-4150CDN | Users Manual - English - Page 116
    lever (1) at the left of the machine counterclockwise to the release position. Holding 5 the green handles of the drum unit, lift the front of the drum unit and remove it from the machine. 1 d Hold the green handle of the belt unit with both hands and lift the belt unit up, then pull it out. 110
  • Brother International HL-4150CDN | Users Manual - English - Page 117
    not required for the replacement waste toner box. The orange packing pieces are installed at the factory to protect your machine during shipment. f Remove the waste toner box from the machine using the green handle. g Unpack the new waste toner box and put the new waste toner box in the machine
  • Brother International HL-4150CDN | Users Manual - English - Page 118
    Maintenance h Slide the belt unit back into the machine. Make sure the belt unit is level and fits firmly into place. i Make sure the green lock lever (1) is in the release position as shown in the illustration. 5 1 j Match the guide ends (2) of the drum unit to the c marks (1) on both sides
  • Brother International HL-4150CDN | Users Manual - English - Page 119
    Routine Maintenance k Turn the green lock lever (1) clockwise to the lock position. 1 l Push the drum unit in until it stops. 5 m Close the front cover of the machine. 113
  • Brother International HL-4150CDN | Users Manual - English - Page 120
    the outside and inside of the machine regularly with a dry, lint-free cloth. When you replace the toner cartridge or the drum unit, make sure that you clean the inside of the machine. If printed pages are stained with toner, clean the inside of the machine with a dry, lint-free cloth. WARNING DO NOT
  • Brother International HL-4150CDN | Users Manual - English - Page 121
    Routine Maintenance c Wipe the outside of the machine with a dry, lint-free cloth to remove dust. 5 d Remove anything that is stuck inside the paper tray. e Wipe the inside of the paper tray with a dry, lint-free cloth to remove dust. f Put the paper tray back in the machine. g Connect interface
  • Brother International HL-4150CDN | Users Manual - English - Page 122
    unplug the AC power cord. b Press the front cover release button and then open the front cover. 5 c Hold the green handle of the drum unit. Pull the drum unit out until it stops. d Turn the green lock lever (1) at the left of the machine counterclockwise to the release position. Holding the green
  • Brother International HL-4150CDN | Users Manual - English - Page 123
    you carry it. DO NOT hold the sides of the drum unit. • We recommend that you place the drum unit on a clean, flat surface with a piece of disposable paper underneath it in case you accidentally spill or scatter toner. 5 • To prevent damage to the machine from static electricity, DO NOT touch
  • Brother International HL-4150CDN | Users Manual - English - Page 124
    the green lock lever (1) is in the release position as shown in the illustration. 1 5 g Match the guide ends (2) of the drum unit to the c marks (1) on both sides of the machine, then gently slide the drum unit into the machine until it stops at the green lock lever. 1 2 h Turn the green lock lever
  • Brother International HL-4150CDN | Users Manual - English - Page 125
    Routine Maintenance i Push the drum unit in until it stops. j Close the front cover of the machine. 5 k Connect interface cables and then plug the machine back in. Turn on the power switch. 119
  • Brother International HL-4150CDN | Users Manual - English - Page 126
    wires If you have print quality problems, clean the corona wires as follows: a Press the front cover release button and then open the front cover. b Hold the green handle of the drum unit. Pull the drum unit out until it stops. 5 5 c Hold the handle of the toner cartridge and slightly push it
  • Brother International HL-4150CDN | Users Manual - English - Page 127
    Routine Maintenance d Push to release the latches of the corona wire cover (1), and then open the cover. 5 1 e Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. 1 Note Be sure to return the tab to the
  • Brother International HL-4150CDN | Users Manual - English - Page 128
    the toner cartridge into the drum unit then slightly pull it toward you until you hear it click into place. Make sure that you match the toner cartridge color to the same color label on the drum unit. Repeat this for all the toner cartridges. C M Y K C - Cyan M - Magenta Y - Yellow K - Black 122
  • Brother International HL-4150CDN | Users Manual - English - Page 129
    Routine Maintenance i Push the drum unit in until it stops. j Close the front cover of the machine. 5 123
  • Brother International HL-4150CDN | Users Manual - English - Page 130
    Routine Maintenance Cleaning the drum unit 5 If your printout has colored spots at 94 mm (3.7 in.) intervals, the drum may have foreign material, such as glue from a label stuck on the drum surface. Follow the steps below to solve the problem. a Make sure the machine is in the ready state. b
  • Brother International HL-4150CDN | Users Manual - English - Page 131
    and remove it from the machine. 1 5 IMPORTANT • Hold the green handles of the drum unit when you carry it. DO NOT hold the sides of the drum unit. • We recommend that you place the drum unit and/or toner cartridge on a clean, flat surface with a piece of disposable paper underneath it in case you
  • Brother International HL-4150CDN | Users Manual - English - Page 132
    drum unit. Repeat this for all the toner cartridges. 5 i Turn the drum unit over by holding the green handles. Make sure that the drum unit gears (1) are on the left hand side. 1 j Read following information from the drum dot check sheet.  Dot Color problem: The color of printed dots is the color
  • Brother International HL-4150CDN | Users Manual - English - Page 133
    area of the appropriate color drum by using the numbers beside the drum which relate to the numbers of column. 5 l Turn the drum unit gear toward you by hand while looking at surface of the suspected area. m When you have found the mark on the drum that matches the drum dot check sheet, wipe
  • Brother International HL-4150CDN | Users Manual - English - Page 134
    of the toner cartridge and slide it into the appropriate colored section of the drum unit until it clicks into place. C M Y K 5 C - Cyan M - Magenta Y - Yellow K - Black o Make sure the green lock lever (1) is in the release position as shown in the illustration. 1 p Match the guide ends (2) of
  • Brother International HL-4150CDN | Users Manual - English - Page 135
    Routine Maintenance q Turn the green lock lever (1) clockwise to the lock position. 1 r Push the drum unit in until it stops. 5 s Close the front cover of the machine. t Connect interface cables and then plug the machine back in. Turn on the power switch. 129
  • Brother International HL-4150CDN | Users Manual - English - Page 136
    Routine Maintenance Cleaning the paper pick-up roller 5 a Turn off the machine's power switch. Disconnect all interface cables, and then unplug the AC power cord. b Pull the paper tray completely out of the machine. c Tightly wring out a lint-free cloth soaked in lukewarm water, and then wipe the
  • Brother International HL-4150CDN | Users Manual - English - Page 137
    be adequately insured with the carrier. • For HL-4570CDWT users, the lower tray and the machine should parts for repacking: 1 3 2 1 Plastic bag for the waste toner box 2 Orange packing materials for locking the internal parts (4 pieces) 3 A piece of paper (A4 or Letter) to protect the belt unit
  • Brother International HL-4150CDN | Users Manual - English - Page 138
    unplug the AC power cord. b Press the front cover release button and then open the front cover. 5 c Hold the green handle of the drum unit. Pull the drum unit out until it stops. d Turn the green lock lever (1) at the left of the machine counterclockwise to the release position. Holding the green
  • Brother International HL-4150CDN | Users Manual - English - Page 139
    toner cartridge and the waste toner box carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once. • To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration. e Hold the green handle of the belt unit
  • Brother International HL-4150CDN | Users Manual - English - Page 140
    of orange packing material and discard them. Note 5 This step is only necessary when you are replacing the waste toner box for the first time, and is not required for the replacement waste toner box. The orange packing pieces are installed at the factory to protect your machine during shipment
  • Brother International HL-4150CDN | Users Manual - English - Page 141
    Routine Maintenance h Slide the belt unit back into the machine. Make sure the belt unit is level and fits firmly into place. i Install orange packing materials to the drum unit as follows: 5  Install one orange packing material (1) to secure the toner cartridges to the drum unit on the left and
  • Brother International HL-4150CDN | Users Manual - English - Page 142
    Put a piece of paper (A4 or letter) on the belt unit to prevent damage to the belt unit. k Make sure the green lock lever (1) is in the release position as shown in the illustration. 5 1 l Match the guide ends (2) of the drum unit to the c marks (1) on both sides of the machine, then gently slide
  • Brother International HL-4150CDN | Users Manual - English - Page 143
    Routine Maintenance m Turn the green lock lever (1) clockwise to the lock position. 1 n Push the drum unit in until it stops. 5 o Close the front cover of the machine. p Put the Styrofoam piece (1) into the carton. Then put the waste toner box in the Styrofoam piece. 1 137
  • Brother International HL-4150CDN | Users Manual - English - Page 144
    machine on the Styrofoam piece (1) and the Styrofoam piece (2) on the top of the machine. Match the front side of the machine to the "FRONT" mark on each Styrofoam piece. FRONT 2 5 FRONT r Put the power cord into the Styrofoam piece (2). 1 2 s Close the carton and tape it shut. 1 138
  • Brother International HL-4150CDN | Users Manual - English - Page 145
    .brother.com/ and click Manuals on your model page to download the other manuals. Identifying your problem First, check the following:  The AC power cord is connected properly and the machine is turned on.  All of the protective parts have been removed.  The toner cartridges and drum unit
  • Brother International HL-4150CDN | Users Manual - English - Page 146
    the drum unit on page 101.)  Put in a new belt unit. (See Replacing the belt unit on page 105.)  Put in a waste toner box. (See Replacing the waste toner box on page 109.)  If the problem continues, call your dealer or Brother Customer Service. Pull out the drum unit. Take out the toner cartridge
  • Brother International HL-4150CDN | Users Manual - English - Page 147
    it on again.  If this error message appears again, replace the DIMM with a new one. (See Installing extra memory on page 86.) Drum Error The corona wire on the drum unit needs to be cleaned. Clean the corona wires. (See Cleaning the corona wires on page 120.) Duplex Disabled The back cover of
  • Brother International HL-4150CDN | Users Manual - English - Page 148
    failed. See Troubleshooting chapter in User's Guide. Registration failed.  Turn off the machine. Wait a few seconds, then turn it on again.  Put in a new belt unit. (See Replacing the belt unit on page 105.)  If the problem continues, call your dealer or Brother Customer Service. Short Paper
  • Brother International HL-4150CDN | Users Manual - English - Page 149
    6 For the maintenance messages, see Routine Maintenance on page 88. Call service messages Call service message Print Unable ## Action 6 Turn off the machine. Wait a few seconds, then turn it on again. If this does not clear the error, call your dealer or a Brother Customer Service. 143
  • Brother International HL-4150CDN | Users Manual - English - Page 150
    .  Make sure the machine is powered on and that no error messages on the LCD.  Make sure that you have chosen the correct printer driver. When printing on normal paper,  Change the printer driver setting in Media Type to a thin setting. it creases.  Open the back cover and check the fuser
  • Brother International HL-4150CDN | Users Manual - English - Page 151
    tray (Tray 1). (See page 146.)  Jam Tray 2 (3) Paper jam in the lower tray (Tray 2). (See page 146.)  Jam Duplex (4) Paper jam underneath the standard paper tray (Tray 1) or in the fuser unit. (See page 149.)  Jam Rear (5) Paper jam where the paper comes out of the machine. (See page 152
  • Brother International HL-4150CDN | Users Manual - English - Page 152
    Troubleshooting Jam MP Tray (paper jam in the MP tray) 6 Jam MP Tray If a loading paper in the MP tray, make sure that the paper stays under the maximum paper height guides on both sides of the tray. e Press Go to resume printing. Jam Tray 1 / Jam Tray 2 (Paper jam inside the paper tray) 6 Note The
  • Brother International HL-4150CDN | Users Manual - English - Page 153
    Troubleshooting If a paper jam occurs inside the paper tray, follow these steps: a Pull the paper tray completely out of the machine. 6 WARNING DO NOT touch the shaded parts shown in the illustration. These rollers may be rotating at high speed and can pinch or entrap your hand. 147
  • Brother International HL-4150CDN | Users Manual - English - Page 154
    Troubleshooting b Use both hands to slowly pull out the jammed paper. 6 Note Pulling out the jammed paper downward allows you to remove the paper easier. c Make sure that the paper is below the maximum paper mark (b b b). While pressing the green paper-guide release lever, slide the paper guides to
  • Brother International HL-4150CDN | Users Manual - English - Page 155
    Troubleshooting Jam Duplex (paper jam underneath the standard paper tray (tray 1) or in the fuser unit) 6 Jam Duplex If a paper jam occurs inside the duplex unit, follow these steps: a Leave the machine turned on for 10 minutes to cool down. b Pull the paper tray completely out of the machine and
  • Brother International HL-4150CDN | Users Manual - English - Page 156
    Troubleshooting c If paper is not caught inside the machine, check underneath the paper tray. Note Do not put the paper tray back in at this point. 6 d If the paper is not caught in the paper tray, open the back cover. WARNING After you have just used the machine, some internal parts of the
  • Brother International HL-4150CDN | Users Manual - English - Page 157
    Troubleshooting e Pull out the jammed paper slowly. f Fully close the back cover. g Put the paper tray back in the machine. 6 151
  • Brother International HL-4150CDN | Users Manual - English - Page 158
    Troubleshooting Jam Rear (Paper jam behind the back cover) 6 Jam Rear If a paper jam occurs behind the back cover, follow these steps: a Leave the machine turned on for 10 minutes to cool down. b Open the back cover. 6 WARNING After you have just used the machine, some internal parts of the machine
  • Brother International HL-4150CDN | Users Manual - English - Page 159
    Troubleshooting c Pull the green tabs (2) at the left and right hand sides toward you and fold down the fuser cover (1). 2 2 3 3 1 6 Note If the envelope to the original position before pulling the green tabs (2) down. d Using both hands, gently pull the jammed paper out of the fuser unit. 153
  • Brother International HL-4150CDN | Users Manual - English - Page 160
    Troubleshooting e Close the fuser cover (1). 2 2 1 6 Note If you print on envelopes, pull down the envelope levers (2) to the envelope position again before closing the back cover. f Close the back cover. 154
  • Brother International HL-4150CDN | Users Manual - English - Page 161
    Troubleshooting Jam Inside (Paper jam inside the machine) Jam Inside If a paper jam occurs inside the machine, follow these steps: a cord. b Press the front cover release button and then open the front cover. c Hold the green handle of the drum unit. Pull the drum unit out until it stops. 6 6 155
  • Brother International HL-4150CDN | Users Manual - English - Page 162
    Troubleshooting d Turn the green lock lever (1) at the left of the machine counterclockwise to the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine. 1 IMPORTANT 6 • Hold the green handles of the drum unit when you carry
  • Brother International HL-4150CDN | Users Manual - English - Page 163
    Troubleshooting e Pull out the jammed paper slowly. IMPORTANT 6 To avoid print quality problems, DO NOT touch the shaded parts shown in the illustration. f Make sure the green lock lever (1) is in the release position as shown in the illustration. 1 157
  • Brother International HL-4150CDN | Users Manual - English - Page 164
    Troubleshooting g Match the guide ends (2) of the drum unit to the c marks (1) on both sides of the machine, then gently slide the drum unit into the machine until it stops at the green lock lever. 1 2 h Turn the green lock lever (1) clockwise to the lock position. 6 1 i Push the drum unit in until
  • Brother International HL-4150CDN | Users Manual - English - Page 165
    media on page 2.) b Check that the drum unit and toner cartridges are installed properly. Examples of poor print quality Recommendation 6 White lines, bands or ribbing across the page  Put in a new drum unit. (See Replacing the drum unit on page 101.) ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789
  • Brother International HL-4150CDN | Users Manual - English - Page 166
    the toner cartridge that matches the color of the streak or band. (See Replacing the toner cartridges on page 96.) To identify the color of the toner cartridge, visit us at http://solutions.brother.com/ to view our FAQs and troubleshooting tips.  Put in a new drum unit. (See Replacing the drum unit
  • Brother International HL-4150CDN | Users Manual - English - Page 167
    0123456789. abcdefghijklmnopqrstuvwxyz.  Identify the color causing the problem and put in a new toner cartridge. (See Replacing the toner cartridges on page 96.) To identify the color of the toner cartridge, visit us at http://solutions.brother.com/ to view our FAQs and troubleshooting tips. 161
  • Brother International HL-4150CDN | Users Manual - English - Page 168
    (For Windows® BR-Script printer driver) or Print Settings on page 53 (For Macintosh printer driver).  Identify the color causing the problem and put in a new toner cartridge. (See Replacing the toner cartridges on page 96.)  Put in a new drum unit. (See Replacing the drum unit on page 101.) All
  • Brother International HL-4150CDN | Users Manual - English - Page 169
    put in a new toner cartridge for that color. (See Replacing the toner cartridges on page 96.) To identify the color of the toner cartridge, visit us at http://solutions.brother.com/ to view our FAQs and troubleshooting tips. 6  Put in a new drum unit. (See Replacing the drum unit on page 101
  • Brother International HL-4150CDN | Users Manual - English - Page 170
    Troubleshooting Examples of poor print Toner Fixing mode in the printer driver. See Improve Print Output in Improve Print Output on page 39 (For Windows® printer driver), Advanced options on page 44 (For Windows® BR-Script printer driver) or Print Settings on page 53 (For Macintosh printer driver
  • Brother International HL-4150CDN | Users Manual - English - Page 171
    a USB flash memory drive is connected to the USB direct interface. Press Go to wake up the machine to display the Direct Print menu on the LCD. Network problems 6 For problems concerning using your machine on a Network, see the Network User's Guide. The latest Network User's Guide in PDF format is
  • Brother International HL-4150CDN | Users Manual - English - Page 172
    Troubleshooting Other problems 6 For Macintosh with USB 6 Problem Recommendation The machine does not appear in Printer Setup Utility (Mac OS X 10.4.11) or Print & Fax in System Preferences (Mac OS X 10.5.x and 10.6.x).  Make sure the machine is powered on and that there are no error messages
  • Brother International HL-4150CDN | Users Manual - English - Page 173
    HL-4150CDN HL-4570CDW HL-4570CDWT Technology Electrophotographic Laser Printer (Single-pass) Print speed 1 2 Single side (A4 size/ Letter print size) Monochrome Up to 24 ppm (A4 size) 3, Up to 25 ppm (Letter size) 3 Up to 28 ppm (A4 size) 3, Up to 30 ppm (Letter size) 3 Full color Up
  • Brother International HL-4150CDN | Users Manual - English - Page 174
    's Guide for details on the supported network protocols. 2 Brother original Windows® and Macintosh utility for printer and print server management. Install from the supplied CD-ROM. 3 Brother original Windows® utility for printer and print server management. Download from http://solutions.brother
  • Brother International HL-4150CDN | Users Manual - English - Page 175
    Appendix Software A Model HL-4150CDN HL-4570CDW HL-4570CDWT Printer driver Windows® 1 Host-based driver for Windows® 2000 Professional, Windows® XP Home Edition, Windows® XP Professional, Windows® XP Professional x64 Edition, Windows Server® 2003 4, Windows Server® 2003 x64 Edition 4,
  • Brother International HL-4150CDN | Users Manual - English - Page 176
    Appendix Direct Print feature A Model Direct Print File types HL-4150CDN HL-4570CDW HL-4570CDWT PDF version 1.7 1, JPEG, Exif+JPEG, PRN (created by HL-4150CDN or HL-4570CDW(T) printer driver printer driver) 2, TIFF(scanned by all Brother MFC or DCP models), XPS version 1.0 1 Data that
  • Brother International HL-4150CDN | Users Manual - English - Page 177
    HL-4570CDW HL-4570CDWT Media types Multi-purpose Tray Plain paper, Thin paper, Thick paper, Thicker paper, Recycled paper, Bond paper, Label, Envelopes, Env.Thin, Env.Thick, Glossy Paper Paper tray (Standard) Plain paper, Thin Paper, Recycled paper Lower tray unit (Option) Automatic duplex
  • Brother International HL-4150CDN | Users Manual - English - Page 178
    Appendix Supplies A Model Toner Cartridge Drum Unit Belt Unit Waste Toner Box Standard Black High Capacity Cyan, Magenta, Yellow Black Cyan, Magenta, Yellow HL-4150CDN HL-4570CDW HL-4570CDWT Order No. Approx. 2,500 pages A4/Letter pages 1 TN-310BK Approx. 1,500 pages A4/Letter pages 1 TN
  • Brother International HL-4150CDN | Users Manual - English - Page 179
    mm (16.1 × 19.1 × 12.3 in.) Approx. 21.0 kg (46.3 lb) HL-4570CDW HL-4570CDWT 410 × 495 × 446 mm (16.1 × 19.5 × 17.6 in.) Approx. 27.0 kg (59.5 lb) Other A Model Power Source Power consumption 1 (Average) Printing Ready HL-4150CDN HL-4570CDW 110 - 120 V AC 50/60Hz Approx. 560 W at 25 °C (77
  • Brother International HL-4150CDN | Users Manual - English - Page 180
    /G5 Intel® Core™ Processor Intel® Core™ Processor 512 MB 1 GB 80 MB 1 GB 2 GB 1 Microsoft® Internet Explorer 6.0 or greater. 2 Third party USB ports are not supported. For the latest driver updates, visit http://solutions.brother.com/. 174
  • Brother International HL-4150CDN | Users Manual - English - Page 181
    A Paper is divided by usage, such as paper for printing and paper for copying. The usage is usually written on the paper's package. Check the package to see whether it is suitable for laser printers. Use paper that is suitable for laser printers. Basis weight A The basis weight of the paper in
  • Brother International HL-4150CDN | Users Manual - English - Page 182
    side of the paper ream package is the print side. Follow the instructions on the paper package. Typically, the print side is indicated by an arrow. Moisture , the characteristics of the paper changes greatly. The fixing of the toner may become worse. For storage of the paper and during use, we
  • Brother International HL-4150CDN | Users Manual - English - Page 183
    × 257 mm 176 × 250 mm 128 × 182 mm 125 × 176 mm 220 × 110 mm 100 × 148 mm 1 Postcard with the size specified by Japan Post Service Co., LTD in. 8.5 × 11 in. 8.5 × 14 in. 7.25 × 10.5 in. 3.875 × 7.5 in. 4.12 × 9.5 in. 8.5 × 13 in. 3 × 5 in. A A 177
  • Brother International HL-4150CDN | Users Manual - English - Page 184
    a Web browser, you will need to know the IP address of the print server. a Start your Web browser. b Type "http://machine's IP wireless network. • For Macintosh users, you can also have easy access to Web Based Management by clicking the machine icon on Status Monitor screen. c Click Printer Settings
  • Brother International HL-4150CDN | Users Manual - English - Page 185
    you choose the OCR-A or OCR-B font, the matching symbol set is always used. OCR A (0O) OCR B (1O) HP LaserJet mode ABICOMP B/P (13P) DESKTOP (7J) HP GERMAN (0G) ISO LATIN1 (0N) ISO LATIN5 (5N) ISO2 IRV (
  • Brother International HL-4150CDN | Users Manual - English - Page 186
    can print bar codes in the HP LaserJet emulation modes. Print bar codes or expanded characters A Code Dec Hex ESC i 27 105 1B 69 Format: the bar code commands. If certain parameters are not given, they take the preset settings. The last parameter must be the bar code data start ('b' or 'B') or
  • Brother International HL-4150CDN | Users Manual - English - Page 187
    code style parameter is ignored. Expanded Character 'S' 0 = White 1 = Black 2 = Vertical stripes A 3 = Horizontal stripes 4 = Cross hatch ' or 'Mnnn' (nnn = 0 ~ 32767) This parameter shows the bar code width. The unit of 'nnn' is a percentage. Bar code human readable line ON or OFF A n = '
  • Brother International HL-4150CDN | Users Manual - English - Page 188
    shows whether the machine prints the human readable line below the bar code. Human readable characters are always printed with OCR-B font of of the bar codes. Its width can be shown using the units that are set by A the 'u' or 'U' parameter. (For the description of 'u' or 'U' parameter, see
  • Brother International HL-4150CDN | Users Manual - English - Page 189
    ' This parameter shows the downward offset from the current print position in the 'u'- or 'U'-specified unit. Bar code, expanded character, line block drawing and box The height of bar codes is shown in the 'u'- or 'U'-specified unit. The default setting of the bar code height (12 mm, 18 mm or 22 mm
  • Brother International HL-4150CDN | Users Manual - English - Page 190
    those stated above will cause a data error that results in the bar code data being printed as normal print data. If the check digit is not can be accepted as bar code data. Eight digits 1 2 Six digits 2 (standard format) The first character must be '0' and the data must end with a check digit.
  • Brother International HL-4150CDN | Users Manual - English - Page 191
    SHIFT code, %S, allows temporary switching (for one character only) from set A to set B and vice versa. The '%' character can be encoded by sending T131': The same rules apply as for 't6' or 'T6'.  When EAN 128 set A, set B or set C is selected with the parameter 't132' or 'T132', 't133' or 'T133'
  • Brother International HL-4150CDN | Users Manual - English - Page 192
    Appendix No. Code 128 Set C Input command Hex No. Code 128 Set C Input command Hex 0 00 NUL 0x00 52 52 4 0x34 1 01 0x62 47 47 / 0x2f 99 99 c 0x63 48 48 0 0x30 100 Set B d 0x64 49 49 1 0x31 101 Set A e 0x65 50 50 2 0x32 102 FNC 1 f 0x66 51 51 3 0x33 186
  • Brother International HL-4150CDN | Users Manual - English - Page 193
    it6r1o0x150y70b0123456?\"; 'Codabar LPRINT CHR$(27);"it9r1s0o0x00y100bA123456A\"; 'Code 128 set A LPRINT CHR$(27);"it12r1o0x00y120bCODE128A12345?\"; 'Code 128 set B LPRINT CHR$(27);"it13r1o0x00y140bCODE128B12345?\"; 'Code 128 set C LPRINT CHR$(27);"it14r1o0x00y160b";CHR$(1);CHR$(2);"?\"; 'ISBN(EAN
  • Brother International HL-4150CDN | Users Manual - English - Page 194
    needs. You can download the latest drivers, software and utilities, read FAQs and troubleshooting tips to learn how to get the most from B your Brother product. http://solutions.brother.com/ You can check here for Brother driver updates. Customer Service B Visit http://www.brother.com/ for
  • Brother International HL-4150CDN | Users Manual - English - Page 195
    Brother Solutions Center is our one-stop resource for all your machine needs. You can download the latest software and utilities and read FAQs and troubleshooting tips to learn how to get the most from your Brother product. http://solutions.brother.com/ You can check here for Brother driver updates
  • Brother International HL-4150CDN | Users Manual - English - Page 196
    us at: In USA: Printer Customer Support Brother International Corporation 7905 North Brother Boulevard Bartlett, TN 38133 In Canada: Brother International Corporation (Canada), Ltd. - Marketing Dept. 1, rue Hotel de Ville Dollard-des-Ormeaux, PQ, Canada H9B 3H6 Service center locator (USA only
  • Brother International HL-4150CDN | Users Manual - English - Page 197
    http://www.brothermall.com/ In Canada: 1-877-BROTHER http://www.brother.ca/ Description Toner Cartridge Item TN-310BK (Standard, Toner Cartridge TN-315M (High Capacity, Approx. 3,500 pages) 1 2 TN-310Y (Standard, Approx. 1,500 pages) 1 2 Drum Unit Waste Toner Box Belt Unit
  • Brother International HL-4150CDN | Users Manual - English - Page 198
    Bar code control 180 Belt unit 105 Brother Numbers (Europe and other countries) ...... 188 Brother Numbers (USA/Canada 189, 190, 191 BR-Script3 42 BR-Script3 166 Buttons 63 C Calibration 38, 82 Call Service messages 143 Cancel button 64 Character sets 178 Cleaning 114 Color Correction 79
  • Brother International HL-4150CDN | Users Manual - English - Page 199
    Print 64 Service centers (USA/Canada 190 Service centres (Europe and other countries) ........ 188 Sleep mode 39, 67, 165, 173 SO-DIMM 85 Specifications 167 Status Monitor 60 Supplies (USA/Canada 191 Symbol 178 T TCP/IP 75, 76, 77 Thick paper 12 Toner cartridge 95, 96 Troubleshooting
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
USER’S GUIDE
Brother Laser Printer
HL-4150CDN
HL-4570CDW
HL-4570CDWT
For visually-impaired users
You can read this manual with Screen
Reader ‘text-to-speech’ software.
You must set up the hardware and install the driver before you can use the machine.
Please use the Quick Setup Guide to set up the machine. You can find a printed copy in the box.
Please read this User’s Guide thoroughly before you use the machine.
where you can get product support, the latest driver updates and
utilities, and answers to frequently asked questions (FAQs) and technical questions.
Note: Not all models are available in all countries.
(HL-4150CDN) In USA:
Please go to the Brother Solutions Center at http://solutions.brother.com/
and click Manuals
on your model page to download the other manuals.
Version 0
USA/CAN