Brother International HL-L6300DW Stapler Finisher Online Users Guide
Brother International HL-L6300DW Manual
View all Brother International HL-L6300DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International HL-L6300DW manual content summary:
- Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 1
Stapler Finisher OnlineUser'sGuide Online User's Guide SF-4000 © 2019 Brother Industries, Ltd. All rights reserved. - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 2
Definitions of Notes We use the following symbol throughout this User's Guide: Tips icons indicate helpful hints and supplementary information. Trademarks BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd. Any trade names and product names of companies appearing on - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 3
the Stapler Finisher ...2 1.3 Prioritize Printing Using the SF Continue Mode 4 1.4 Print Media Specifications ...4 2. Supplies ...5 2.1 Staple Cartridge ...5 2.2 Replace the Staple Cartridge ...6 3. Troubleshooting...8 3.1 Paper and Staple Jams ...8 3.2 Error and Maintenance Messages ...11 ii - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 4
time. ・ To use the Staple and Offset functions, set the SF Output Tray in the printer driver or from your machine's LCD. ・ Before using the Stapler Finisher, see installation instructions in the How to Set Up the Stapler Finisher guide included with the product or at support.brother.com/manuals. 1 - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 5
Stacker. d) Click OK. From the machine's LCD: a) On the machine's LCD, press [Settings] > [Paper Tray] > [Output Tray]. b) Press [SF] or [SF Stacker]. For non-standard printer drivers only. Not required for the users of the standard Brother printer driver. 2 - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 6
the same time. From the machine's LCD: a) On the machine's LCD, press b) Press [On] or [Off]. [Settings] > [Paper Tray] > [Staple] or [Offset]. For non-standard printer drivers only. Not required for the users of the standard Brother printer driver. 3 - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 7
printing when the selected paper size or media type is not supported by the Stapler Finisher. Setting On Off Description The machine and type, and select it in the printer driver. Some printer drivers may not be able to display media mismatch errors. By default, the SF Continue Mode is on. To - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 8
Cartridge When staples need to be replaced, an error message appears on the machine's LCD or in the Status Monitor. We recommend purchasing the following Staple Cartridge: Name Staple Cartridge Order No. SR100 For more information about the staples, visit www.brother.com/original or contact your - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 9
2.2 Replace the Staple Cartridge When the message "Add Staples" appears on the machine's LCD, there are fewer than 20 staples remaining and you must replace the Staple Cartridge: 1. Open the Staple Cover. 2. Remove the Staple Cartridge. 3. Remove the empty Staple Cartridge Case. 6 - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 10
4. Unpack a new Staple Cartridge Case. 5. Attach the new Staple Cartridge Case onto the Staple Cartridge. 6. Insert the Staple Cartridge into the Stapler Finisher. 7. Close the Staple Cover. 7 - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 11
3. Troubleshooting This chapter explains how to resolve typical problems you may encounter when using the Stapler Finisher with your Brother machine. 3.1 Paper and Staple Jams When the message "Finisher Jam" appears on the machine's LCD or in the Status Monitor, you must clear any paper - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 12
4. Gently remove any jammed paper from the Stapler Finisher unit. 5. Close the Finisher Rear Cover. 6. Open the Staple Cover. 7. Remove the Staple Cartridge. 9 - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 13
8. Lift the Staple Cartridge latch. 9. Remove any jammed staples. 10. Lock the Staple Cartridge latch into its original position. 11. Reinsert the Staple Cartridge into the Stapler Finisher. 12. Close the Staple Cover. 10 - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 14
replaced. If this happens, your machine will display the error or required routine maintenance notification on the LCD. The most common error and maintenance messages are shown in the table. Follow the instructions in the Action column to solve the error support closed. The printer's rear cover - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 15
Error Message Print Unable XX Cause The Stapler Finisher has a mechanical problem. Action • Press and hold to turn off the machine, wait a few minutes, and then turn it on again. • If the problem continues, contact Brother Customer Service or your local Brother dealer. 12 - Brother International HL-L6300DW | Stapler Finisher Online Users Guide - Page 16
Visit us on the World Wide Web global.brother ENG Version 0
Stapler Finisher
Online User’s Guide
Online User’s Guide
SF-4000
© 2019 Brother Industries, Ltd. All rights reserved.