Brother International Innov-is 6000D Operation Manual for Premium Pack I Optio
Brother International Innov-is 6000D Manual
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International Innov-is 6000D manual content summary:
- Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 1
Upgrade KITI Operation Manual Before using this upgrade kit, be sure to read this Operation Manual for information on its correct use. - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 2
Position 20 CHANGING THE PATTERN SIZE WHILE MAINTAINING THE DESIRED THREAD DENSITY (STITCH RECALCULATOR)...23 NEW PATTERNS...25 Thumbnail List ...25 Embroidery Patterns Color Change Table 26 Before using this upgrade kit, be sure to read this Operation Manual for information on its correct use. 1 - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 3
can then be used as outlined in this upgrade Operation Manual. Additional new machine features and instructions are located in the New Features of Version 2 guide. NEW FEATURES The following features will be activated with the upgrade for Kit I. • The bobbin case (gray) and bobbin cover (for bobbin - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 4
1 Chapter How to Create Bobbin Work - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 5
be fed through the sewing machine needle and sewing on the wrong side of the fabric. Bobbin work is sewn using the special bobbin case (gray) and bobbin cover with tabs included with Kit I. 1. Utility stitches 2. Decorative stitches 3. Free motion sewing Bobbin work embroidery is sewn using the - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 6
/Thread/Needle Combinations" (in the chapter "CHANGING THE NEEDLE") and "Embroidery Step by Step" in the machine's Operation Manual. ■ Presser foot Utility stitches or decorative stitches: Monogramming foot "N" Free motion sewing: Free motion quilting foot "C", Free motion open toe quilting foot - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 7
→ Echo Quilting Using the Free Motion Echo Quilting Foot "E" → Attaching Embroidery Foot "W" c Thread the machine with the upper thread. For details on threading the machine, refer to "Upper Threading" in the machine's Operation Manual. Preparing the Bobbin Thread In order to create bobbin work - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 8
bobbin case (gray) cannot be used for sewing in any way other than bobbin work. After sewing bobbin work, refer back to the steps If the bobbin case is incorrectly installed, the thread may become tangled or the machine may be damaged. h Wind a decorative thread around the bobbin by hand. After - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 9
• When winding the bobbin, make sure the thread is not frayed. Sewing with frayed thread may result in the thread catching on the tension spring of the bobbin case, the thread becoming tangled or damage to the machine. • Do not guide the bobbin thread through the groove in the needle plate cover - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 10
installing the needle plate cover, refer to "Cleaning the Race" in the machine's Operation Manual. a Needle plate cover b Bobbin cover with tabs CAUTION • When creating , refer to "CREATING BOBBIN WORK (SEWING)" on page 10. If embroidery patterns are to be used, refer to "CREATING BOBBIN WORK - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 11
this may cause the needle to break, immediately stop sewing if this occurs. Turn off the machine and cut out the tangled thread with scissors. Then thread tension, refer to "Setting the Thread Tension" in the machine's Operation Manual. a Wrong side of fabric Memo We recommend a setting between - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 12
not move out of place. m Align the upper thread and bobbin thread, and then pass them under the presser foot toward the rear of the machine. Note • Before sewing, check that there is enough thread in the bobbin. q When you have reached the end of the stitching area, stop the - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 13
embroidery instructions for "CREATING BOBBIN WORK (SEWING)" beginning on page 10. ■ For information about using the free motion quilting foot "C", free motion open toe quilting foot "O", or free motion echo quilting foot "E" refer to "Free Motion Quilting" located in the machine's Operation Manual - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 14
had been selected, the automatic thread cutting function is turned off. → When a bobbin work embroidery pattern is selected the embroidery sewing speed is automatically set at 350 spm. d Turn on the machine. e Press . → The carriage will move to the initialization position. f To select a bobbin - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 15
5 of the machine's Operation Manual. Memo • We recommend a setting between 6 and 8 for the upper thread tension. Start Embroidering Note • Since bobbin work is sewn from the wrong side of the fabric, the pattern shown in the screen appears as a mirror image of the final sewn embroidery. If - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 16
machine, and then tie the upper thread and the bobbin thread together to secure the threads. l Start sewing again to finish the pattern. g As shown below, pull the upper thread to pull the bobbin thread up through the fabric. m Raise the needle and presser foot, remove the embroidery - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 17
the tension of the bobbin thread and of the upper thread, and then try sewing the pattern again. For more details, refer to "ADJUSTING THE THREAD TENSION" on page 17. Memo • Check bobbin after each bobbin work embroidery pattern is sewn to make sure there is adequate bobbin thread for the next - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 18
to check the sewing results. ■ Adjusting the upper thread tension We recommend a setting between 6 and 8 for the upper thread tension. If utility stitches are being used, refer to "Setting the Thread Tension" in chapter 2 of the machine's Operation Manual. If embroidery patterns are being used - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 19
TROUBLESHOOTING Several solutions for minor problems are described below. If the problem persists, contact your nearest authorized dealer. ■ The thread was accidentally cut automatically and the bobbin thread is caught inside the machine of the bobbin case Sew with no tension applied to the bobbin thread - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 20
2 Chapter New Features and New Patterns - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 21
such as quilting, refer to "Positioning the pattern on thick fabric" (page 22). a Hoop the fabric in the embroidery frame, and then attach the frame to the embroidery machine. b Select the pattern, and then press . Note • Check page 8/8 of Settings screen to make sure the Fabric Thickness - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 22
the background will disappear. c Press to remove the background image completely. Memo • The pattern can also be aligned from the sewing screen. Note • If the embroidery is not sewn the fabric background will remain on the screen. In Settings screen 8/8 press background image. to erase the - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 23
will not affect embroidering if it is turned on with normal embroidery. a Hoop the fabric in the embroidery frame, and then attach the frame to the embroidery machine. b Select the pattern, and then press . f Affix the embroidery positioning sticker to the fabric within the area indicated by - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 24
normal pattern resizing. c Press d Press mode ( . to enter Stitch Recalculator ). Note • Be sure to sew trial embroidery using same fabric and threads as project in order to check the sewing results. a Press . b Select the pattern to be resized, and then press . Note • This function cannot - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 25
size. g Press . h Press . Note • Depending on the pattern, embroidering may not be possible at the appropriate thread density. Before sewing on your project, be sure to sew trial embroidery on a piece of scrap fabric that is the same as the fabric used in the project using the same needle and - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 26
ENGLISH NEW PATTERNS Thumbnail List Utility embroidery patterns Note • Must be accessed through Embroidery mode; not Embroidery Edit mode. Alphabet character patterns 25 - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 27
. No.1 4 min 030 22.4 cm 19.9 cm 4.5 m (3.9m + 0.6 m) No.2 a Time required for embroidering b Embroidery thread color c Embroidery thread color number d Embroidery size e Total length of thread needed to sew the pattern (to sew the pattern + to tie ends) No.3 1 min 030 17.5 cm 9.7 cm 1.5 m (0.9m - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 28
ENGLISH No.7 1 min 620 13.6 cm 13.3 cm 1.6 m (1.0m + 0.6 m) No.10 1 min 405 7.5 cm 6.8 cm 1.0 m (0.4m + 0.6 m) No.13 2 min 542 12.4 cm 13.6 cm 2.7 m (2.1m + 0.6 m) No.8 No.9 1 min 405 15.4 cm 10.0 cm No.11 1.6 m (1.0m + 0.6 m) 1 min 509 6.3 cm 7.5 cm No.12 1.1 m (0.5m + 0.6 m) 2 min 030 12 - Brother International Innov-is 6000D | Operation Manual for Premium Pack I Optio - Page 29
English 111-001
Before using this upgrade kit, be sure to read this Operation Manual
for information on its correct use.
Upgrade KIT
I
Operation Manual