Brother International Innov-is VE2200 Operation Manual

Brother International Innov-is VE2200 Manual

Get Brother International Innov-is VE2200 PDF manuals and user guides View all Brother International Innov-is VE2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Brother International Innov-is VE2200 manual content summary:

  • Brother International Innov-is VE2200 | Operation Manual - Page 1
    Operation Manual Embroidery Machine Product Code: 882-D80/D82 Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference.
  • Brother International Innov-is VE2200 | Operation Manual - Page 2
    but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or trademark or a trademark of International Business Machines Corporation. Microsoft, Windows and Windows Vista software title is mentioned in this manual has a Software License Agreement specific
  • Brother International Innov-is VE2200 | Operation Manual - Page 3
    Please read these safety instructions before attempting to use the machine. DANGER - To reduce the risk of electrical shock 1 Always unplug the machine from the electrical outlet immediately after using, when cleaning, making any user servicing adjustments mentioned in this manual, or if you are
  • Brother International Innov-is VE2200 | Operation Manual - Page 4
    occurs or adjustment is required, first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother dealer. Use this machine only for its intended use as described in the
  • Brother International Innov-is VE2200 | Operation Manual - Page 5
    IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This machine is intended for household use. FOR USERS IN mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Brother International Innov-is VE2200 | Operation Manual - Page 6
    908) 704-1700 declares that the product Product Name: Model Number: Brother Sewing Machine VE2200, BP2100, BP2150L This device complies with Part 15 of the FCC , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
  • Brother International Innov-is VE2200 | Operation Manual - Page 7
    ) Try the new function using the supplied sensor pen Page B-52 E Embroidering This section provides instruction to embroider designs with this machine. Chapter 1, "Embroidery", provides details on sewing embroidery patterns stored on the machine as well as patterns that have been imported. Chapter
  • Brother International Innov-is VE2200 | Operation Manual - Page 8
    CONTENTS CONTENTS TRADEMARKS INTRODUCTION 1 IMPORTANT SAFETY INSTRUCTIONS 1 WHAT YOU CAN DO WITH THIS MACHINE ..... 5 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS 8 Machine 8 Needle and Presser Foot Section 9 Embroidery Unit 9 Operation Buttons 10 Included Accessories 11 Options 13 B Basic
  • Brother International Innov-is VE2200 | Operation Manual - Page 9
    Uninterrupted Embroidering (Monochrome - Using a Single Color 84 Basting Embroidery 84 USING THE MEMORY FUNCTION 85 A Appendix Chapter1 How to 18 Touch Panel is Malfunctioning 18 TROUBLESHOOTING 19 ERROR MESSAGES 22 SPECIFICATIONS 25 UPGRADING YOUR MACHINE'S SOFTWARE ... 26 Upgrade Procedure
  • Brother International Innov-is VE2200 | Operation Manual - Page 10
    the thread around the thread guide plate when threading upper thread. (page B-38) a Connector for the presser foot Connect the embroidery foot "W+" with LED pointer. (The embroidery foot "W+" with LED pointer is optional on certain models.) (page B-42) b Handle Carry the machine by its handle when
  • Brother International Innov-is VE2200 | Operation Manual - Page 11
    "W+" with LED pointer or embroidery foot "W" for most machine embroidering. (page B-42) c Bobbin cover Open the bobbin cover to set the bobbin. (page B-36) d Needle plate cover Remove the needle plate cover to clean the race. (page E-22) e Needle plate f Needle bar thread guide Pass the upper thread
  • Brother International Innov-is VE2200 | Operation Manual - Page 12
    again to raise the embroidery foot. e "Automatic Threading" button Use this button to automatically thread the needle. CAUTION • Do not press the thread cutter button after the threads have been cut. The needle may break and threads may become tangled, or damage to the machine may occur. B-10
  • Brother International Innov-is VE2200 | Operation Manual - Page 13
    Included Accessories 1* 2* 3 4 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS 5 6 7 8 75/11 3 needles 90/14 1 needle 75/11 2 needles: Ball point needle for embroidery HAX130EBBR 9 10 11 12* 13 14 15 16 17* 18 19 20 21 22 23* 24 25* 26* 27 28 29* 30* 31* 32 33
  • Brother International Innov-is VE2200 | Operation Manual - Page 14
    XC4487-021 34 Operation manual This manual 35 Quick Reference Guide XF3841-001 (882-D80) XF3637-001 (882-D82) *1 75/11 3 needles 90/14 1 needle *2 75/11 2 needles Ball point needle for embroidery HAX130EBBR Memo • Always use accessories recommended for this machine. • Placing bobbin clips on
  • Brother International Innov-is VE2200 | Operation Manual - Page 15
    are correct at the time of printing. Please be aware that some specifications may change without notice. Note • Embroidery cards purchased in foreign countries may not work with your machine. • Visit your dealer or nearest authorized Brother dealer for a complete listing of optional accessories and
  • Brother International Innov-is VE2200 | Operation Manual - Page 16
    NAMES OF MACHINE PARTS AND THEIR FUNCTIONS B-14
  • Brother International Innov-is VE2200 | Operation Manual - Page 17
    Basic operations This section provides details on the initial setup procedures as well as descriptions of this machine's more useful functions. Page number starts with "B" in this section. Chapter1 Getting Ready B-16 Chapter2 Sensor Functions (For models equipped with the sensor function B-52
  • Brother International Innov-is VE2200 | Operation Manual - Page 18
    Functions 21 Using the Machine Setting Mode Key 22 ■ Selecting the "Eco Mode" or "Shutoff Support Mode 25 ■ EMBROIDERY FOOT 42 Removing the Embroidery Foot 42 Attaching the Embroidery Foot 42 ■ Checking the Needle Drop Point With the Embroidery Foot "W+" with LED Pointer (For Embroidery
  • Brother International Innov-is VE2200 | Operation Manual - Page 19
    should be turned to OFF or the plug must be removed from the socket-outlet. • When servicing the machine or when removing covers, the machine must be unplugged. • For U.S.A. only This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
  • Brother International Innov-is VE2200 | Operation Manual - Page 20
    a Insert the power supply cord into the power cord receptacle, then insert the plug into a wall outlet. Setting Your Machine for the First Time When you first turn on the machine, set the language and time/date to your language and local time/date. Follow the procedure below when the settings
  • Brother International Innov-is VE2200 | Operation Manual - Page 21
    the year (YYYY), month (MM) and date (DD). c Select whether 24h or 12h setting to display. d Set the current time. e Press to start using your machine.  The clock starts from 0 second of the time you set. Note • The time/date you set may be cleared, if you don't turn on the
  • Brother International Innov-is VE2200 | Operation Manual - Page 22
    screen. ■ Home Page Screen a b No. Display Key Name Explanation a "Embroidery" key Attach the embroidery unit and press this key to embroider patterns. b "Embroidery Edit" key Press this key to combine embroidery patterns. With the "Embroidery Edit" functions, you can also create original
  • Brother International Innov-is VE2200 | Operation Manual - Page 23
    " or "Embroidery Edit". b Clock key Press this key to set the clock to your local time. B-18 c Presser foot/Needle Press this key before changing the needle, the presser foot, etc. This key locks B-42 to exchange key all key and button functions to prevent operation of the machine. B-45
  • Brother International Innov-is VE2200 | Operation Manual - Page 24
    Setting Mode Key Press to change the default machine settings (needle stop position, embroidery speed, opening display, etc.). Memo • Press or machine power by setting the "Eco Mode" or the "Shutoff Support Mode" (see page B-25). g Select the initial screen that is displayed when the machine
  • Brother International Innov-is VE2200 | Operation Manual - Page 25
    d Display the service count which is a reminder to take your machine in for regular servicing. (Contact your machine. Memo • The latest version of software is installed in your machine. Check with your local authorized Brother dealer or at " http://support.brother.com/ " for available updates
  • Brother International Innov-is VE2200 | Operation Manual - Page 26
    ; thread number, color name (see page E-34). c When the thread number "#123" is selected, select from six thread brands (see page E-34). d Adjust the maximum embroidery speed setting (see page E-33). e Adjust the upper thread tension for embroidering (see page E-30). f Select the height of the
  • Brother International Innov-is VE2200 | Operation Manual - Page 27
    off the machine while the machine is in the "Eco Mode" or the "Shutoff Support Mode", wait for about 5 seconds before turning on the machine again. LCD changing the background color, refer to "Changing the Background Colors of the Embroidery Patterns" on page B-26. a Press .  The settings screen
  • Brother International Innov-is VE2200 | Operation Manual - Page 28
    opening movie screen is touched. * Home Page: When the machine is turned on, the home page screen appears. * Embroidery Screen: When the machine is turned on, the "Embroidery" screen appears if the embroidery unit is attached to the machine. d Press to return to the original screen. ■ Choosing
  • Brother International Innov-is VE2200 | Operation Manual - Page 29
    the 66 a LCD SCREEN ■ Specifying the Size of Pattern Thumbnails The thumbnails for selecting an embroidery pattern B can be set to be displayed at the smaller size or a larger size. original screen. Memo • The setting remains selected even if the machine is turned off. Basic operations B-27
  • Brother International Innov-is VE2200 | Operation Manual - Page 30
    . A maximum of 100 images can be saved on a single USB media at one time. a Insert the USB media into the the right side of the machine. USB port on Note • When thumbnail size setting has been changed the pattern selection screen will not immediately reflect the chosen size. To view the
  • Brother International Innov-is VE2200 | Operation Manual - Page 31
    the machine, changing embroidery attaching the embroidery unit, changing feet, etc. Some of the functions are described embroidery feet, individual threading screens are animated. information. displays troubleshooting displays information about cleaning the machine, etc. Basic operations B-29
  • Brother International Innov-is VE2200 | Operation Manual - Page 32
    b Press .  The lower half of the screen will change. c Press (upper threading).  The screen shows instructions for threading the machine. d Read the instructions. * To view video, press instructions. of the displayed Press under movie to go back to the beginning. Press to pause. Press
  • Brother International Innov-is VE2200 | Operation Manual - Page 33
    29). Follow the steps explained below to complete the operation. CAUTION • The included bobbin was designed specifically for this machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, (SFB
  • Brother International Innov-is VE2200 | Operation Manual - Page 34
    the thread spool. With your left hand, near hold the end of the thread, and use both hands to pass the thread through the thread guide. a Thread guide B-32
  • Brother International Innov-is VE2200 | Operation Manual - Page 35
    thread is under the pre-tension disk. h Pass the end of the thread through the guide slit in the bobbin winder seat, and pull the thread to the right to cut the thread switch to the left switches the machine into bobbin winding mode.  The bobbin winding window appears. Basic operations B-33
  • Brother International Innov-is VE2200 | Operation Manual - Page 36
    , do not pull on the bobbin winder seat. Doing so could loosen or remove the bobbin winder seat, and could result in damage to the machine. CAUTION • Setting the bobbin improperly may cause the thread tension to loosen, breaking the needle and possibly resulting in injury. Memo • You can change the
  • Brother International Innov-is VE2200 | Operation Manual - Page 37
    the bobbin on the shaft. LOWER THREADING f Pass the thread through the thread guide. B 1 Getting Ready a Groove in the bobbin b Spring on the shaft so that the thread unwinds from the front of the spool. a Thread guide g Pass the thread around the pre-tension disk making sure that the thread
  • Brother International Innov-is VE2200 | Operation Manual - Page 38
    bobbin, be sure to press in the LCD, otherwise injuries may occur if the "Start/Stop" button or any other button is pressed and the machine starts sewing. a Press and then to lock the keys and raise the presser foot. buttons, * If the message "OK to automatically lower the presser foot
  • Brother International Innov-is VE2200 | Operation Manual - Page 39
    firmly around the tab with your left hand as shown, lightly pull the thread to guide it through the slit. a Slit b Cutter (Cut the thread with the cutter case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated. a a Flat spring CAUTION • Be sure to hold down
  • Brother International Innov-is VE2200 | Operation Manual - Page 40
    to tangle and break the needle, leading to injury.  The upper thread shutter opens so the machine can be threaded. Memo • The automatic threading function can be used with embroidery machine needle sizes 75/11 through 90/14. • Thread such as transparent nylon monofilament thread and thread with
  • Brother International Innov-is VE2200 | Operation Manual - Page 41
    cap. a Spool cap (special) b 12 mm (1/2 inch) c 75 mm (3 inches) f While holding the pull the thread up thread with both hands, from under the thread guide plate. a Thread guide plate g While holding hand, pass the the thread in your right thread through the thread
  • Brother International Innov-is VE2200 | Operation Manual - Page 42
    in the upper groove area to check if the thread catches on the take-up lever visible inside the upper groove area. a Groove in thread guide l Pull the thread up through the thread cutter to cut the thread, as shown in the illustration. a Look in the upper groove area i Pass the
  • Brother International Innov-is VE2200 | Operation Manual - Page 43
    " button to have the machine automatically thread the needle. Note • Some needles cannot be threaded with the needle threader. In this case, instead of B using the needle threader after passing the thread through the needle bar thread guide (marked "6"), manually pass the thread 1 through
  • Brother International Innov-is VE2200 | Operation Manual - Page 44
    Foot a Press the "Needle the needle. Position" button to raise d Unplug the connector of the embroidery foot "W+" from the jack on the back of the machine. b Press . * If the message "OK to automatically lower the presser foot? " appears on the LCD screen, press OK to continue
  • Brother International Innov-is VE2200 | Operation Manual - Page 45
    foot. If the screw is loose, the needle may strike the embroidery foot and possibly cause injury. c Plug the connector of the embroidery foot "W+" with LED pointer into the jack on the back of your machine. Memo • When the LED pointer is turned on, the presser foot height is automatically
  • Brother International Innov-is VE2200 | Operation Manual - Page 46
    appear in light gray and are not available. To enable the keys for specifying the settings, attach embroidery foot "W+" with LED pointer to the machine. The keys are enabled after the embroidery foot is plugged in. a Press .  The settings screen appears. b Display screen. page 7 of the
  • Brother International Innov-is VE2200 | Operation Manual - Page 47
    the needle. If is not pressed and the Start/Stop button or another operation button is pressed accidentally, the machine will start and injury may result. • Use only embroidery machine needles made for home use. Other needles may bend or break and may cause injury. • Never sew with a bent
  • Brother International Innov-is VE2200 | Operation Manual - Page 48
    is probably the most important part of the machine. Choosing the proper needle for your embroidering project will result in a beautiful finish and fewer problems. Below are some things to keep in mind about needles. • Use needle 75/11 for embroidery. • It is recommended that a 90/14 needle should
  • Brother International Innov-is VE2200 | Operation Manual - Page 49
    may result. c Hold down the release button, and pull the embroidery unit away from the machine. ■ Attaching the Embroidery Unit CAUTION • Do not move the machine with the embroidery unit attached. The embroidery unit could fall off and cause injury. • Keep your hands and foreign objects away
  • Brother International Innov-is VE2200 | Operation Manual - Page 50
    patterns will not embroider with the correct registration. • Do not push on the carriage when installing the embroidery unit onto the machine. Moving the carriage may damage the embroidery unit. c Turn the main power to ON.  The following message will appear. d Press .  The carriage will move
  • Brother International Innov-is VE2200 | Operation Manual - Page 51
    or PE-DESIGN PLUS, you can plug the included USB card writer module into the machine as an embroidery card reader, and recall patterns. • Depending on the type of USB media being used, computer (or USB hub), refer to the instruction manual for the corresponding equipment. Basic operations B-49
  • Brother International Innov-is VE2200 | Operation Manual - Page 52
    Using a USB Mouse The USB mouse, connected to the machine, can be used to perform a variety of operations in the screens. Note • If a mouse other than the optional USB mouse is used, it may not perform as described in this Operation Manual. ■ Changing Pages Rotate the mouse wheel to switch through
  • Brother International Innov-is VE2200 | Operation Manual - Page 53
    Getting Ready USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE B 1 Basic operations B-51
  • Brother International Innov-is VE2200 | Operation Manual - Page 54
    with the machine in some countries or regions. CONNECTING THE SENSOR PEN 53 Using the Sensor Pen Holder 53 USING THE SENSOR PEN 55 Using the Sensor Pen 55 Important Information about Sensor Pen 55 Calibrating the Sensor Pen 56 USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE
  • Brother International Innov-is VE2200 | Operation Manual - Page 55
    remove the protective cap covering the hole on the right side of the machine.  Insert the point of the seam ripper or cleaning brush into the in or pull it straight out. • When disconnecting the sensor pen from the machine, do not pull on the cord, otherwise the sensor pen may be damaged.
  • Brother International Innov-is VE2200 | Operation Manual - Page 56
    CONNECTING THE SENSOR PEN c Set the sensor pen in the sensor pen holder with the pen tip pointing downward, and then connect the sensor pen to the machine. B-54
  • Brother International Innov-is VE2200 | Operation Manual - Page 57
    sensor pen may prevent the information from being correctly read. • Do not drag the sensor pen tip on the machine, otherwise the sensor pen tip may be chipped off. • If there is any problem with the guideline marker, the sensor function may not operate correctly. Memo • The sensor pen can be used
  • Brother International Innov-is VE2200 | Operation Manual - Page 58
    Sensor Function Calibration" in the settings screen. Doing so allows the machine to learn the position in which you usually hold the pen. Hold the sensor pen at a comfortable angle and then calibrate the machine according to the procedure below. Be sure to keep the sensor pen
  • Brother International Innov-is VE2200 | Operation Manual - Page 59
    a Embroidery unit f Press repeat the to finish the calibration. To calibration touch the first point again using the sensor pen, and continue with step e. USING THE
  • Brother International Innov-is VE2200 | Operation Manual - Page 60
    Keep your hands etc. away from the carriage." appears during the operation, ensure safety, and then press . a Turn on the machine. b Press (Embroidery)/ (Embroidery Edit). c Select the category embroidered. for the pattern to be d In the pattern selection screen, press the key for the
  • Brother International Innov-is VE2200 | Operation Manual - Page 61
    position selection screen appears. Sensor Functions (For models equipped with the sensor function) i Select the method for embroidery pattern. positioning the * To align the edge of the embroidery with a pattern or mark on the fabric, select the edge. If the center of the pattern to be
  • Brother International Innov-is VE2200 | Operation Manual - Page 62
    pen, fabric corresponding touch 2 points on the to the numbers in the center of the embroidery pattern. i Press to apply the setting. j The preview in the updated according embroidery screen to the specified is embroidering position. k Press the "Start/Stop" embroidering. button to
  • Brother International Innov-is VE2200 | Operation Manual - Page 63
    to move the LED pointer on the fabric for adjusting the second position. g Press to apply the setting. h The preview in the updated according embroidery screen to the specified is embroidering position. i Press the "Start/Stop" embroidering. button to start Note • When using the sensor
  • Brother International Innov-is VE2200 | Operation Manual - Page 64
    USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE B-62
  • Brother International Innov-is VE2200 | Operation Manual - Page 65
    Embroidering This section provides instruction to embroider designs with this machine. Page number starts with "E" in this section. The screen display and machine illustration may vary slightly, depending on the countries or regions. Chapter1 Embroidery E-2 Chapter2 Embroidery Edit E-56
  • Brother International Innov-is VE2200 | Operation Manual - Page 66
    Precautions on Using the Computer to Create and Save Data 44 ■ Tajima (.dst) Embroidery Data 45 Saving Embroidery Patterns in the Machine's Memory 45 ■ If the Memory is Full 45 Saving Embroidery Patterns to USB Media 46 Saving Embroidery Patterns in the Computer 47 Retrieving Patterns from the
  • Brother International Innov-is VE2200 | Operation Manual - Page 67
    If another screen is displayed, press , then There are 6 categories of patterns in this machine. to display the screen below. a b c d e f g h i j a Embroidery patterns b Brother "Exclusives" c Floral alphabet patterns d Frame patterns e Character patterns f Bobbin work patterns (see
  • Brother International Innov-is VE2200 | Operation Manual - Page 68
    SELECTING PATTERNS Selecting Embroidery Patterns/Brother "Exclusives"/Floral Alphabet/Bobbin Work Patterns c Press to Press the key embroider. of the pattern you want to d Press .  The embroidery screen is displayed. e Proceed to "VIEWING THE EMBROIDERING SCREEN" on page E-9 to
  • Brother International Innov-is VE2200 | Operation Manual - Page 69
    you make a mistake, press to erase the mistake. * If the pattern is too small to see clearly, you can use the key to check it. E 1 Embroidery Memo • If you continue adding characters after changing the size, the new characters will be entered in the new size. • You cannot change the size
  • Brother International Innov-is VE2200 | Operation Manual - Page 70
    SELECTING PATTERNS g Press again and enter "F". i Press . h Press and then enter "ly".  The embroidery screen is displayed. j Proceed to "VIEWING THE EMBROIDERING SCREEN" on page E-9 to embroider the pattern. * To return to the previous screen to select another pattern,
  • Brother International Innov-is VE2200 | Operation Manual - Page 71
    Card Reader (Sold Separately) and USB Card Writer Module* • Use only an embroidery card Reader designed for this machine. Using an unauthorized embroidery card Reader may cause your machine to operate incorrectly. * If you have purchased the PE-DESIGN Ver5 or later, PE-DESIGN NEXT, PE-DESIGN
  • Brother International Innov-is VE2200 | Operation Manual - Page 72
    card Reader/USB card writer module into the USB port on the machine. Selecting Patterns from USB Media/Computer To recall patterns from the computer or USB media, see pages E-49 to E-50. a USB port b Embroidery card Reader/USB card writer module b Insert the card completely into the Reader
  • Brother International Innov-is VE2200 | Operation Manual - Page 73
    the thread). j Shows the number of colors in the selected pattern, and the number of the color currently being sewn. k Shows the part of the embroidery that will be sewn with the first thread color. l Shows the order for thread color changes and the embroidering time for each thread color. * The
  • Brother International Innov-is VE2200 | Operation Manual - Page 74
    pattern position. v Memory key Press this key to save a pattern in the machine's memory, USB media or a E-45 to computer. E-47 w Uninterrupted Press this key to embroider the selected pattern with a single color. E-43 embroidery key x Density key Press this key to change the density of
  • Brother International Innov-is VE2200 | Operation Manual - Page 75
    or puffy fabrics. Attaching Iron-on Stabilizers (Backing) to the Fabric For best results in your embroidery projects, always use stabilizer material for embroidery. Follow the package instructions for the stabilizer being used. When using fabrics that cannot be ironed (such as towel or fabrics
  • Brother International Innov-is VE2200 | Operation Manual - Page 76
    PREPARING THE FABRIC b Iron the iron-on stabilizer wrong side of the fabric. material to the a Fusible side of stabilizer b Fabric (wrong side) Memo • When embroidering on thin fabrics such as organdy or lawn, or on napped fabrics such as towel or corduroy, use water soluble stabilizer (sold
  • Brother International Innov-is VE2200 | Operation Manual - Page 77
    frames can be used. When choosing frames that do not appear on the screen, be sure to check the design size of the embroidery field of the optional frame. Check with your authorized dealer for frame compatibility. Select a frame that matches the pattern size. Included frame options are displayed
  • Brother International Innov-is VE2200 | Operation Manual - Page 78
    PREPARING THE FABRIC ■ Inserting the Fabric Note • If the fabric is not securely held in the embroidery frame, the embroidery design will sew out poorly. Insert the fabric on a level surface, and gently stretch the fabric taut in the frame. Follow the steps below to
  • Brother International Innov-is VE2200 | Operation Manual - Page 79
    initial position. adjustment screw to its PREPARING THE FABRIC b Place the embroidery sheet frame. Align the guide lines on on the the inner embroidery sheet with the mark you made on the fabric. E 1 Embroidery Memo • You can use the included screwdriver when you loosen or tighten
  • Brother International Innov-is VE2200 | Operation Manual - Page 80
    or Fabric Edges ■ Embroidering Ribbons or Tape Secure with double-sided tape or a temporary spray adhesive. Use an embroidery stabilizer to provide extra support. After embroidering, remove the stabilizer carefully. Attach the stabilizer as shown in the following examples. We recommend using
  • Brother International Innov-is VE2200 | Operation Manual - Page 81
    lever to be level with the frame to secure the embroidery frame in the embroidery frame holder. a Embroidery frame holder b Embroidery frame guide c Slide the embroidery frame into the holder, making sure to align the embroidery frame's with the holder's . a Frame-securing lever CAUTION • If the
  • Brother International Innov-is VE2200 | Operation Manual - Page 82
    ATTACHING THE EMBROIDERY FRAME b Pull the embroidery frame toward you. E-18
  • Brother International Innov-is VE2200 | Operation Manual - Page 83
    If the pattern needs to be repositioned for better placement on the garment, you can check the layout before starting embroidery. 1 Embroidery Checking the Pattern Position The embroidery frame moves and shows the pattern position. Watch the frame closely to make sure the pattern will be sewn in
  • Brother International Innov-is VE2200 | Operation Manual - Page 84
    as it appears in the following display. ■ Frame sizes displayed on screen Icon Name Embroidering area Extra large embroidery frame H 30 cm × W 18 cm (H 11-3/4 inches × W 7-1/8 inches) Large embroidery frame (optional with some models) H 18 cm × W 13 cm (H 7-1/8 inches × W 5-1/8 inches) Medium
  • Brother International Innov-is VE2200 | Operation Manual - Page 85
    bobbin threads (no color on the screw) Bobbin case (for the embroidery machine) The bobbin case (no color on the screw) is installed in the machine. We recommend using the included embroidery bobbin thread. The screw on this case can be adjusted if necessary (see page E-31). This bobbin
  • Brother International Innov-is VE2200 | Operation Manual - Page 86
    Memo • The [+] cursor moves over the pattern, showing which part of the pattern is being sewn. a Thread the machine with thread for the first color, pass the thread through the hole in embroidery foot, pull out some thread to give it some slack, and then lightly hold the end of the thread
  • Brother International Innov-is VE2200 | Operation Manual - Page 87
    the "Start/Stop" embroidering. button to start  When the first color is completely sewn, the machine will automatically trim the threads and stop. The presser foot will then automatically be raised. On the embroidery color order display, the next color will move to the top. Memo • If there is
  • Brother International Innov-is VE2200 | Operation Manual - Page 88
    you plan to use when attaching the appliqué in step g. a Outline of appliqué b Appliqué material Memo • The embroidery procedure is the same as the basic procedure explained on page E-22.  The machine will sew around the outline of the appliqué pieces and will then stop. c Remove the appliqu
  • Brother International Innov-is VE2200 | Operation Manual - Page 89
     The appliqué will then be completed. h Change the rest the upper thread and of the embroidering. then carry out SEWING AN EMBROIDERY PATTERN E 1 Embroidery Memo • Some glue may get onto the presser foot, needle, and needle plate at this time. Finish embroidering the appliqué pattern and
  • Brother International Innov-is VE2200 | Operation Manual - Page 90
    If very little sewing remains, you can embroider 10 final stitches without rethreading the machine by pressing . The machine will stop after sewing the 10 stitches. b Unlock the frame-securing lever remove the embroidery frame. and * Be careful not to apply strong force to the fabric at this
  • Brother International Innov-is VE2200 | Operation Manual - Page 91
    ADJUSTMENTS DURING THE EMBROIDERY PROCESS If the Thread Breaks During Sewing a Press the "Start/Stop" machine. button to stop use , , , or to move ahead to slightly before where the thread broke. Embroidery e Press to return to the original screen. f Press the "Presser Foot Lifter"
  • Brother International Innov-is VE2200 | Operation Manual - Page 92
    the pattern. Memo • Even if the power goes out in the middle of embroidery, the machine returns to the point where embroidery was stopped when the machine is turned on again. a b Press .  The embroidery frame moves, returning the needle to the pattern's beginning position. c Press the "Presser
  • Brother International Innov-is VE2200 | Operation Manual - Page 93
    frame and press . ADJUSTMENTS DURING THE EMBROIDERY PROCESS E 1 Embroidery  The previous embroidery screen displayed before the machine was turned off appears. Memo • If you want to start a new embroidery pattern, press so the pattern selection screen appears. d Continue embroidering
  • Brother International Innov-is VE2200 | Operation Manual - Page 94
    MAKING EMBROIDERY ADJUSTMENTS MAKING EMBROIDERY ADJUSTMENTS Adjusting Thread Tension a Press . When embroidering, to the situation. Note • If the thread tension setting is made extremely weak, the machine may stop during sewing. This is not the sign of a malfunction. Increase the thread
  • Brother International Innov-is VE2200 | Operation Manual - Page 95
    it from the setting screen. Press to tighten the upper thread tension and press to loosen the upper tension. If an individual embroidery pattern needs additional fine tuning, refer to "Adjusting Thread Tension" on page E-30. a Do not turn a phillips screw (+). b Adjust with a screwdriver (small
  • Brother International Innov-is VE2200 | Operation Manual - Page 96
    MAKING EMBROIDERY ADJUSTMENTS ■ Bobbin Thread is Too Tight a Press . Upper This function can be turned on or off during embroidering. * This setting returns to its default when the machine is turned off. b Press to turn off the automatic thread cutting function.  The key will display as *
  • Brother International Innov-is VE2200 | Operation Manual - Page 97
    can be turned on or 1 off during embroidering. Select a setting from 5 mm to 50 mm in 5 mm increments. * Your customized setting remains after turning the machine off and on. Embroidery Press or to select the length of jump stitch. For example: Press to select 25 mm (1 inch) and the
  • Brother International Innov-is VE2200 | Operation Manual - Page 98
    main power is set to OFF remains selected the next time that the machine is turned on. • Decrease the sewing speed to 600 spm when the Thread Color Display You can display the name of the thread colors or embroidery thread number. Memo • Colors on the screen may vary slightly from actual spool
  • Brother International Innov-is VE2200 | Operation Manual - Page 99
    frame embroidering area 18 cm × 13 cm (7-1/8 inches × 5-1/8 inches) d Embroidering area for optional border embroidery frame 18 cm × 10 cm (7-1/8 inches × 4 inches) e Embroidery area for optional quilt embroidery frame 15 cm × 15 cm (6 inches × 6 inches) f Medium frame embroidering area 10 cm × 10
  • Brother International Innov-is VE2200 | Operation Manual - Page 100
    REVISING THE PATTERN REVISING THE PATTERN CAUTION • When you have revised the pattern, check the display of available embroidery frames and use an appropriate frame. If you use an embroidery frame not displayed as available for use, the presser foot may strike the frame and possibly cause injury.
  • Brother International Innov-is VE2200 | Operation Manual - Page 101
    This key is used for aligning linked characters (see page E-41).  The needle position moves to the bottom left corner of the pattern (the embroidery frame moves so that the needle is positioned correctly). b Select size. the direction in which to change the * Press to enlarge the pattern
  • Brother International Innov-is VE2200 | Operation Manual - Page 102
    REVISING THE PATTERN a a Size of the pattern Rotating the Pattern a Press . Memo • Some patterns or characters can be enlarged more than others. • Some patterns or characters can be enlarged to a greater degree if they are rotated 90 degrees. • You can change the size of the pattern by rotating
  • Brother International Innov-is VE2200 | Operation Manual - Page 103
    Image E Press so it appears as to create a 1 horizontal mirror image of the selected pattern. Press again to return the pattern to normal. Embroidery a 0° Memo • You can rotate the pattern by rotating the mouse wheel. Rotate the mouse wheel away from you to rotate the pattern 10 degrees
  • Brother International Innov-is VE2200 | Operation Manual - Page 104
    Colors of Alphabet Character Patterns Combined alphabet character patterns can be sewn with each letter in a different color. If "MULTI COLOR" is set, the machine stops after each character is sewn so that the thread can be changed to a different color. a Press so that it appears as . * Press
  • Brother International Innov-is VE2200 | Operation Manual - Page 105
    character patterns, refer to "Selecting Character Patterns" on page E-5.  The needle is positioned in the lower-left corner of the pattern. The embroidery frame moves so that the needle is positioned correctly. Note • To cancel the starting point setting and return the starting point to the center
  • Brother International Innov-is VE2200 | Operation Manual - Page 106
    THE PATTERN d Press . e Press . h After the characters are embroidered, cut the threads to a generous length, remove the embroidery frame, and then attach the embroidery frame again so that the remaining characters ("DEF") can be embroidered. f Press to turn off the thread cutting
  • Brother International Innov-is VE2200 | Operation Manual - Page 107
    of embroidering for the previous pattern. REVISING THE PATTERN E 1 Embroidery n Press the "Start/Stop" button to begin embroidering the remaining pattern can be stitched out in one color instead of multicolor. The machine will hesitate but not stop between color steps, and then continue till
  • Brother International Innov-is VE2200 | Operation Manual - Page 108
    Data that can be Used • Only .pes, .phc, and .dst embroidery data files can be used with this machine. Using data other than that saved using our data design systems or machines may cause the embroidery machine to malfunction. ■ Types of USB Devices/Media that can be Used Stitch data can be
  • Brother International Innov-is VE2200 | Operation Manual - Page 109
    , it is displayed with our default thread color sequence. Check the preview and change the thread colors as desired. Saving Embroidery Patterns in the Machine's Memory  The "Saving" screen is displayed. When the pattern is saved, the display returns to the original screen automatically. ■ If
  • Brother International Innov-is VE2200 | Operation Manual - Page 110
    USING THE MEMORY FUNCTION b Select the pattern you want to delete. Saving Embroidery Patterns to USB Media When sending embroidery patterns from the machine to USB media, plug the USB media into the machine's USB port. c Press . a b a Amount of memory used by the pattern to be deleted b Amount
  • Brother International Innov-is VE2200 | Operation Manual - Page 111
    My computer)". * The USB cable can be plugged into the USB ports on the computer and embroidery machine whether or not they are turned on.  The "Saving" screen is displayed. When the pattern computer (or USB hub), refer to the instruction manual for the corresponding equipment. Embroidering E-47
  • Brother International Innov-is VE2200 | Operation Manual - Page 112
    c Press when the pattern you want to save is in the embroidery screen. Retrieving Patterns from the Machine's Memory a Press . d Press * Press saving. . to return to the original screen without  The machine displays the patterns currently in the memory. b Press the retrieve. key
  • Brother International Innov-is VE2200 | Operation Manual - Page 113
    may vary by quantity of data. a Insert the USB media into the the machine (see page E-46). USB port on USING THE MEMORY FUNCTION a b E 1 Embroidery c a USB port b USB media b Press . a Folder name b Embroidery patterns in USB media c Path * The path to shows the current folder at
  • Brother International Innov-is VE2200 | Operation Manual - Page 114
    USB cable connector into the corresponding USB ports for the computer and for the machine (see page E-47). b On the computer, open "Computer computer)" then f Press .  Pattern data in "Removable Disk" is written to the machine. Note • While data is being written, do not disconnect the USB cable
  • Brother International Innov-is VE2200 | Operation Manual - Page 115
    glue or a temporary spray adhesive to the rear of the 1 appliqué created in step a. Attach the appliqué to the base fabric matching the Embroidery You can use framed patterns of the same size and shapes. shape to create an appliqué. Embroider one pattern with a straight stitch and one
  • Brother International Innov-is VE2200 | Operation Manual - Page 116
    with a satin stitch. a Select a straight stitch frame pattern, and embroider the pattern onto the base fabric. Note • Do not remove the fabric from the embroidery frame to cut it. Also, do not pull or push on the fabric. Otherwise, the fabric may loosen in the frame. e Select the satin stitch
  • Brother International Innov-is VE2200 | Operation Manual - Page 117
    EMBROIDERY APPLICATIONS a Connect to the machine the media containing the created split embroidery pattern, and then select the split embroidery For details on creating split embroidery patterns and for more detailed sewing instructions, refer to the Instruction manual included with PE-DESIGN Ver
  • Brother International Innov-is VE2200 | Operation Manual - Page 118
    is finished, the following screen appears. Press . d If necessary, edit the pattern.  A screen appears so that a section of the split embroidery pattern can be selected. g Repeat steps b through f to embroider the remaining sections of the pattern. * For details, refer to "REVISING THE
  • Brother International Innov-is VE2200 | Operation Manual - Page 119
    Embroidery EMBROIDERY APPLICATIONS E 1 Embroidering E-55
  • Brother International Innov-is VE2200 | Operation Manual - Page 120
    FUNCTIONS 57 SELECTING PATTERNS TO EDIT 58 Selecting Embroidery Patterns/Brother "Exclusives"/ Floral Alphabet Patterns/Frame/Bobbin Work Patterns PATTERNS 80 Editing Combined Patterns 80 ■ Selecting combined embroidery patterns 82 Sewing Combined Patterns 83 VARIOUS EMBROIDERING FUNCTIONS
  • Brother International Innov-is VE2200 | Operation Manual - Page 121
    Edit ■ Combine Patterns You can easily create combinations of embroidery patterns, frame patterns, character patterns, patterns from the machine's memory, patterns from separately sold embroidery cards, and many other patterns. ■ Move Patterns Within the 30 cm  18 cm (approx. 12 inches  7 inches
  • Brother International Innov-is VE2200 | Operation Manual - Page 122
    SELECTING PATTERNS TO EDIT Prepare the machine for embroidery according to the instructions on "BEFORE EMBROIDERING" of "Basic operations", and press , then to display the screen below. a b c d e f g h i j a Embroidery patterns b Brother "Exclusives" c Floral alphabet patterns d Frame
  • Brother International Innov-is VE2200 | Operation Manual - Page 123
    SELECTING PATTERNS TO EDIT Selecting Embroidery Patterns/Brother "Exclusives"/Floral Alphabet Patterns/Frame/Bobbin Work Patterns Selecting Alphabet Character Patterns E When you select character patterns from the "Embroidery Edit" screen, you can edit the 2 appearance of the pattern at the
  • Brother International Innov-is VE2200 | Operation Manual - Page 124
    arc flatter. * Press to make the arc rounder. Memo • When selecting , and change to and . You can increase or decrease the incline.  The "Embroidery Edit" screen will appear. g Proceed to "EDITING PATTERNS" page E-61 to edit the pattern. on e Press to return to the original screen
  • Brother International Innov-is VE2200 | Operation Manual - Page 125
    EDITING PATTERNS d a a b b c e c EDITING PATTERNS E 2 d e Embroidery Edit a Shows the size of the entire combined pattern. b Shows the size of the pattern currently selected. c Shows the distance from the center of the
  • Brother International Innov-is VE2200 | Operation Manual - Page 126
    64 E-79 i Delete key Press this key to delete the selected pattern (the pattern outlined by the red E-63 box). j "Embroidery" key Press this key to call up the "Embroidery" screen. E-79 k Pattern select key When a combined pattern is selected, use these keys to select a part of the E-64
  • Brother International Innov-is VE2200 | Operation Manual - Page 127
    the Screen Magnified by 200% E For details on moving the pattern, refer to "Moving the Pattern" on page E-36. a Press . 2 Rotating the Pattern Embroidery Edit For details on rotating the pattern, refer to "Rotating the Pattern" on page E-38. Changing the Size of the Pattern For details
  • Brother International Innov-is VE2200 | Operation Manual - Page 128
    EDITING PATTERNS Changing the Configuration of Character Patterns a Press . Changing Character Spacing a Press . b Press the key embroider. of the layout you want to * See page E-60 for more information about layout types. b Use to change the spacing. * Press to increase the
  • Brother International Innov-is VE2200 | Operation Manual - Page 129
    to edit data and transfer to other or older version machines. Same features do not apply in other machines, so problems may occur. • Character spacing can be reduced only when after all characters have been entered. a Press . Embroidery Edit b Press .  The key appears as . Embroidering E-65
  • Brother International Innov-is VE2200 | Operation Manual - Page 130
    EDITING PATTERNS c Use to select where the pattern is to be separated, and then press to separate it. For this example, the pattern will be separated between "T" and "a". Changing the Color of Each Alphabet Character in a Pattern a Press so you can assign a thread color to each character.
  • Brother International Innov-is VE2200 | Operation Manual - Page 131
    palette by directly touching the color selection with the touch pen. Embroidery Edit Changing the Thread Color You can change the thread color by of the sewing order and selecting a new color from the thread colors in the machine. a a In the pattern editing screen, press . a Color palette  The
  • Brother International Innov-is VE2200 | Operation Manual - Page 132
    -Anton thread colors table data can be downloaded from our website " http://support.brother.com ". a In the pattern editing screen, press and then press . c Use to select one of the thread brands in the machine. d Use to enter a color's 4-digit number. * If you make a mistake, press to
  • Brother International Innov-is VE2200 | Operation Manual - Page 133
    e Press . g Press EDITING PATTERNS to return to the original screen. E 2 Embroidery Edit b a a Thread brand b Entered thread color number  The selected thread color is set in the custom thread table. Note • If is not pressed, the thread
  • Brother International Innov-is VE2200 | Operation Manual - Page 134
    data can only be saved to USB media. You cannot save the data in the machine's memory or in the computer. • Custom thread table data is saved as ".pcp" Creating a Custom Thread Table" on page E-68. c Insert the USB the machine. media into the USB port on  The "Saving" screen is displayed.
  • Brother International Innov-is VE2200 | Operation Manual - Page 135
    thread colors you have set in the custom thread table. 2 a Press . Embroidery Edit  The thread color palette screen displays. b Press to change or at "Saving" screen is displayed. When the data is loaded to the machine, the display returns to the original screen automatically. Note • Do not
  • Brother International Innov-is VE2200 | Operation Manual - Page 136
    EDITING PATTERNS c Press . a Designing Repeated Patterns ■ Sewing Repeated Patterns Using the border function, you can create stitches using repeated patterns. You can also adjust the spacing of the patterns within a repeated pattern stitch. a Select a pattern, and then press . b Press . a
  • Brother International Innov-is VE2200 | Operation Manual - Page 137
    EDITING PATTERNS e Adjust the spacing of the repeated pattern. * To widen spacing, press . E * To tighten spacing, press . 2 Embroidery Edit b d e a Vertical direction b Horizontal direction c Repeating and deleting vertical keys d Repeating and deleting horizontal keys e Spacing keys 
  • Brother International Innov-is VE2200 | Operation Manual - Page 138
    EDITING PATTERNS ■ Repeating One Element of a Repeated Pattern c Press . By using the Cut function, you can select one element of a repeated pattern and repeat only that single element. This function allows you to design complex repeated patterns. a Choose the direction pattern will be cut.
  • Brother International Innov-is VE2200 | Operation Manual - Page 139
    can be edited separately in the edit screen. See "Selecting combined embroidery patterns" on page E-82. ■ Color Sorting Repeated Patterns Press to without repeatedly changing the upper thread or changing the sewing order manually. Memo • In combined stitch patterns that contain two or more
  • Brother International Innov-is VE2200 | Operation Manual - Page 140
    frame and keep sewing for the next pattern. Memo • The optional border frame allows you to easily rehoop the fabric without removing the embroidery frame from the machine. Memo • When there are two or more elements, use and or and to select a pattern that you want to assign a thread mark(s) to
  • Brother International Innov-is VE2200 | Operation Manual - Page 141
    mark at the center of the end of the pattern. e Rehoop the fabric in the embroidery frame. * Refer to "Assigning Thread Marks" on page E-75. Note E • Adjust be embroidered next c Embroidering area of embroidery sheet f Attach the embroidery frame to the machine, and then touch . d Remove the
  • Brother International Innov-is VE2200 | Operation Manual - Page 142
    to set the starting point to the center top of the pattern. Duplicating a Pattern a Press . h Touch . i Press the positioning keys to move the embroidery frame until the starting point is aligned with the thread mark on the fabric.  The duplicate is positioned over the original pattern
  • Brother International Innov-is VE2200 | Operation Manual - Page 143
    After Editing a Press . EDITING PATTERNS E 2 Embroidery Edit * To combine the pattern with other patterns, select (see page E-80). * See page E-21 for more information about sewing patterns. Memo • If you want to return to the edit screen after pressing , press . Embroidering E-79
  • Brother International Innov-is VE2200 | Operation Manual - Page 144
    COMBINING PATTERNS COMBINING PATTERNS Editing Combined Patterns Example: Combining alphabet characters with an embroidery pattern and editing b Select . a Press pattern. to select an embroidery c Press . E-80
  • Brother International Innov-is VE2200 | Operation Manual - Page 145
    . COMBINING PATTERNS f Select and enter "Flower". * After selecting , press to change the character case, then enter the remaining characters. E 2 Embroidery Edit e Press to enter the alphabet characters. * Press to return to the previous screen.  The characters you enter will be
  • Brother International Innov-is VE2200 | Operation Manual - Page 146
    that are overlapping and cannot be selected by clicking them or by touching the screen. k When all editing is finished, press . ■ Selecting combined embroidery patterns If multiple patterns have been combined, use to select the pattern to be edited. If a USB mouse is connected, the pattern can
  • Brother International Innov-is VE2200 | Operation Manual - Page 147
    will be embroidered in the order they were entered. In this example, the embroidery order will be as follows: b Embroider  COMBINING PATTERNS . E 2 Embroidery Edit Note • Follow the directions in "Sewing Embroidery Patterns" on page E-22. a Embroider by following the color order on the
  • Brother International Innov-is VE2200 | Operation Manual - Page 148
    the basting is from the pattern. • The setting remains selected even if the machine is turned off. c Press screen. d Press to return to the previous . e Press to select the basting setting. Basting Embroidery Before embroidering, basting stitches can be sewn along the outline of the pattern
  • Brother International Innov-is VE2200 | Operation Manual - Page 149
    When embroidering basting stitching. is finished, remove the E 2 Embroidery Edit USING THE MEMORY FUNCTION In the same way as embroidery patterns in Chapter 1, you can save and retrieve edited embroidery patterns to and from the machine's memory, a personal computer, or USB media. Refer to
  • Brother International Innov-is VE2200 | Operation Manual - Page 150
    USING THE MEMORY FUNCTION E-86
  • Brother International Innov-is VE2200 | Operation Manual - Page 151
    important information for operating this machine. Please read this section to find troubleshooting tips and pointers as well as how to keep your machine in the best working order. Page number starts with "A" in this section. The screen display and machine illustration may vary slightly, depending
  • Brother International Innov-is VE2200 | Operation Manual - Page 152
    cover (option 3 ■ Lower thread 3 ■ Upper thread 4 ■ Needle 4 ■ Embroidery foot 4 ■ Fabric 4 Upper Threading 4 Preparing the Bobbin Thread 4 ■ When bobbin thread 12 TROUBLESHOOTING 13 ■ The thread was accidentally cut automatically and the bobbin thread is caught inside the machine 13 ■
  • Brother International Innov-is VE2200 | Operation Manual - Page 153
    embroidery is created using the bobbin work patterns included with this machine. How to Create Bobbin Work Refer to the "Quick Reference Guide . Refer to page A-6 for more detailed instructions. Note • Do not use thread heavier than No.5 hand embroidery thread. • Some threads may not be
  • Brother International Innov-is VE2200 | Operation Manual - Page 154
    the one for bobbin work. Before creating bobbin work, clean the bobbin case and the race. a Raise the needle and embroidery then turn off the machine. foot, and b Remove the embroidery unit. c Grasp both sides of the needle plate cover, and then slide it toward you to remove it. ■ Fabric Be
  • Brother International Innov-is VE2200 | Operation Manual - Page 155
    bobbin by hand. After winding the bobbin g Insert the bobbin case so that the  mark on the bobbin case aligns with the ● mark on the machine. so it is filled as shown below (about 80%), cut the thread. A 1 How to Create Bobbin Work a b a b For precautions on winding the bobbin for
  • Brother International Innov-is VE2200 | Operation Manual - Page 156
    may result in the thread catching on the tension spring of the bobbin case, the thread completely becoming tangled or damage to the machine. • Do not guide the bobbin thread through the groove in the needle plate cover, otherwise the lower threading cannot be done correctly. k Pull out about
  • Brother International Innov-is VE2200 | Operation Manual - Page 157
    threads and pass them under the presser foot toward the rear of the machine. a Bobbin cover b Bobbin cover with tabs CAUTION • When creating bobbin not allow it to pinch the thread. q Install the embroidery unit. Note • When installing the embroidery unit, do not allow it to pinch the thread. •
  • Brother International Innov-is VE2200 | Operation Manual - Page 158
    length of bobbin thread required for each pattern, refer to the "Quick Reference Guide" included with the machine. Be sure to use a bobbin wound with enough thread. If the bobbin runs out of thread while sewing, the embroidery cannot be completed. • Depending on the thread thickness, it may not be
  • Brother International Innov-is VE2200 | Operation Manual - Page 159
    pattern for bobbin work. If any other type of pattern is selected, the machine may be damaged. Note • Bobbin work embroidery sewing speed defaults to 100 spm when a bobbin work embroidery pattern is selected. The Settings screen will only allow speed to be adjusted from 100 spm to a maximum
  • Brother International Innov-is VE2200 | Operation Manual - Page 160
    the top. Use an embroidery frame that fits the size of the pattern and then attach the frame to the machine. These patterns are embroidered bobbin thread to surface. h Press buttons. to unlock all keys and  The embroidery frame moves to the beginning of stitching. c Press . d Press . 
  • Brother International Innov-is VE2200 | Operation Manual - Page 161
    k Stop the machine, and thread and the bobbin then tie the upper thread together to secure the threads. CREATING BOBBIN WORK o Remove the fabric from the embroidery frame, and check the finished embroidery. A 1 How to Create Bobbin Work l Start sewing again to finish the pattern. m Raise
  • Brother International Innov-is VE2200 | Operation Manual - Page 162
    spring plate with a screwdriver so it is lower than the top surface of the bobbin case (gray), and then insert the bobbin case into the machine. a Do not turn the phillips screw (+). b Adjust with a small screwdriver. To increase the tension of the bobbin thread, turn the slotted-head (-) screw 30
  • Brother International Innov-is VE2200 | Operation Manual - Page 163
    TROUBLESHOOTING A Several solutions for minor problems are described below. If the problem persists, contact your dealer or nearest authorized Brother is caught inside the machine fabric, increase the upper tension (Refer to "ADJUSTING THE THREAD TENSION" on a Remove the embroidery frame. b Cut
  • Brother International Innov-is VE2200 | Operation Manual - Page 164
    17 ADJUSTING THE SCREEN 18 Adjusting the Brightness of the Screen Display 18 Touch Panel is Malfunctioning 18 TROUBLESHOOTING 19 ERROR MESSAGES 22 SPECIFICATIONS 25 UPGRADING YOUR MACHINE'S SOFTWARE........ 26 Upgrade Procedure Using USB Media 26 Upgrade Procedure Using Computer 27 INDEX 28
  • Brother International Innov-is VE2200 | Operation Manual - Page 165
    periodic oiling unnecessary. If problems occur, such as difficulty turning the handwheel or an unusual noise, immediately stop using the machine, and contact your authorized dealer or the nearest authorized service center. Precautions on storing the machine Do not store the machine in any of the
  • Brother International Innov-is VE2200 | Operation Manual - Page 166
    , the sensor may not operate correctly. h Insert the bobbin case so that the  mark on the bobbin case aligns with the ● mark on the machine. * Make sure that the indicated points are aligned before installing the bobbin case. CAUTION • Never use a bobbin case that is scratched; otherwise, the
  • Brother International Innov-is VE2200 | Operation Manual - Page 167
    used. Clean the cutter when the thread is not easily cut. Maintenance and Troubleshooting a Follow steps a through e in "Cleaning the Race" on page A-15 to remove the needle plate cover. b Use the screwdriver machine to unscrew included with the and remove the needle plate. e Insert the
  • Brother International Innov-is VE2200 | Operation Manual - Page 168
    adjust the brightness of the screen display. Touch Panel is Malfunctioning If the screen does not respond correctly when you touch a key (the machine does not perform the operation or performs a different operation), follow the steps below to make the proper adjustments. a Holding your finger on
  • Brother International Innov-is VE2200 | Operation Manual - Page 169
    If the machine stops operating correctly, check the following possible problems before requesting service. You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at " http://support.brother.com
  • Brother International Innov-is VE2200 | Operation Manual - Page 170
    TROUBLESHOOTING Problem Cause Solution Bobbin thread does The thread is not passed through the bobbin not wind neatly on the winding thread guide correctly. bobbin. Bobbin spins slowly. Correctly pass the thread through the bobbin winding thread guide. Press [+] in the bobbin winding window
  • Brother International Innov-is VE2200 | Operation Manual - Page 171
    TROUBLESHOOTING Problem Machine service center. The LCD screen is fogged up. Condensation has formed on the LCD screen. After a while, the cloudiness will disappear. Embroidery uneven surface, the position is not correctly aligned. Manually adjust the position according to the thickness of the
  • Brother International Innov-is VE2200 | Operation Manual - Page 172
    Problem the machine. If you restart the machine, follow the instructions for operating the machine correctly. ERROR MESSAGES If the machine is not embroidery frame. Check and rethread the upper thread. This message appears if the embroidery frame is not attached when you press in the embroidery
  • Brother International Innov-is VE2200 | Operation Manual - Page 173
    area. Specify more centered position of the embroidery frame. (see page B-58) The the machine is in the shutoff support mode. Turn off the machine once to start the machine machine. Check the list of compatible file formats. (see page E-44) Maintenance and Troubleshooting A 2 Appendix A-23
  • Brother International Innov-is VE2200 | Operation Manual - Page 174
    ://support.brother.com/ ". This message is displayed while the USB media is transmitting. Turn off the power and replace the needle plate. USB media error This message is displayed when the needle plate is removed with the machine on or when the machine is turned on and "Embroidery" or "Embroidery
  • Brother International Innov-is VE2200 | Operation Manual - Page 175
    Embroidery Machine and Accessories Dimensions of machine (Box 1 of 2) Dimensions of box Embroidery Unit (Box 2 of 2) Weight of machine Weight of box (for shipping) Embroidering speed Dimensions of embroidery unit Dimensions of machine with embroidery and Troubleshooting A 2 Appendix A-25
  • Brother International Innov-is VE2200 | Operation Manual - Page 176
    'S SOFTWARE You can use USB media or a computer to upgrade software for your machine. When an upgrade program is available on " http://support.brother.com/ ", please download the files following the instructions on the website and steps below. Note • When using USB media to upgrade the software
  • Brother International Innov-is VE2200 | Operation Manual - Page 177
    Maintenance and Troubleshooting UPGRADING YOUR MACHINE'S SOFTWARE Upgrade Procedure Using Computer A Do c Plug the USB cable connector into the corresponding USB ports for the computer and for the machine.  "Removable Disk" will appear in "Computer (My computer)". d Copy the upgrade file
  • Brother International Innov-is VE2200 | Operation Manual - Page 178
    Bobbin work A-2 Border key E-72 E-76 C Calibrating the sensor pen B-56 Character spacing key E-64 Cleaning LCD screen A-15 machine casing A-15 race A-15 Combining Patterns , embroidery edit E-80 Custom Thread Table E-68 E-71 Cut/Tension key E-30 D Density key E-40 E Eco mode B-25 Editing
  • Brother International Innov-is VE2200 | Operation Manual - Page 179
    B-33 B-35 R Race A-15 Repeated patterns E-72 Retrieving computer E-50 embroidery patterns E-48 machine's memory E-48 , USB media E-49 Rotate key E-38 E-63 S Saving computer E-47 embroidery patterns E-45 machine's memory E-45 USB media E-46 Screen brightness A-18 Sensor functions B-52
  • Brother International Innov-is VE2200 | Operation Manual - Page 180
    Please visit us at http://support.brother.com/ where you can get product support and answers to frequently asked questions (FAQs). English 882-D80/D82 Printed in Taiwan XF3635-2012
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
Operation Manual
Embroidery Machine
Product Code: 882-D80/D82
Be sure to read this document before using the machine.
We recommend that you keep this document nearby for future reference.