Brother International KE-435C Inner Clamping Device Instruction Manual - Engli
Brother International KE-435C Manual
 |
View all Brother International KE-435C manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International KE-435C manual content summary:
- Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 1
KE-435B, 435C KE-436B, 436C INSTRUCTION MANUAL INNER CLAMPING DEVICE〈FOR PNEUMATIC〉 Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 2
KE-435C,436C - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 3
INSTALLATION 5 2-1. Work clamp unit 5 2-2. Pneumatic system 7 2-3. Piping 8 2-4. Setting the memory switch (KE-435B, 435C 9 2-5. Setting the memory switch (KE-436B, 436C 11 2-6. Setting the DIP switch (KE-436B, 436C 12 3. ADJUSTMENT 13 3-1. Adjustment of air pressure 13 3-2. Adjustment of - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 4
below the center point (A) at the top edge of the sewing area. * Refer to "4. Note to sewing operations" for details of the reverse stitching area. 1 KE-435C,436C - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 5
the sizes in 2. and 3. above. * If the size in step 2. is larger than the size in 3., then use the size in step 2. for processing. 2633Q KE-435C,436C 2 - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 6
all along the side of the work clamp plate that does not have a ridge line. 4. Then make a step of 0.5 mm as shown in the illustration. 3 KE-435C,436C - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 7
1-5 1-5. Removing the presser foot 1 1. Before installation...... 締ねじ（1 2 Loosen the screw (1), and then remove the presser foot (2). 2958Q KE-435C,436C 4 - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 8
"0". 2-1 2-1. Work clamp unit 1 1 434E エアー (2)（押え(3 2. 送り板(4 1. Remove the work clamp guide plates (1), and detach the work clamp, 434E air (2) together with the work clamp (3). 2. Replace work clamp arm (9), and fix these components with work clamp guide plates (1). 2960Q 5 KE-435C,436C - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 9
clamp crank (6) so that it faces as shown in the illustration, align its groove with the washer (8), and then tighten the screw (1) to secure it. KE-435C,436C 6 - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 10
2. INSTALLATION 2-2 2-2. Pneumatic system 1 1 1. Remove the belt cover (1). (Refer to the Instruction Manual for the sewing machine.) 2963Q 抜く Pull out 押す Push down 2962Q 2965Q 2964Q 2 6 個）（2）の（A table or beam. (Refer to the Instruction Manual for the sewing machine.) 7 KE-435C,436C - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 11
11 番、4 6. Open the control box cover (main P.C. board mounting plate). (Refer to the Instruction Manual for the sewing machine.) 7. Disconnect the valve harness (12P) (9). 8. Insert the pin terminals the belt cover. (Refer to the Instruction Manual for the sewing machine.) KE-435C,436C 8 - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 12
2 2. INSTALLATION 2-4 KE-435B、435C） 2-4. Setting the memory switch (KE-435B, 435C) After changing the memory switch settings, press the power switch to turn the power 7. Press the TEST switch (1). * The display will return to normal. 8. Make the following settings if necessary. 9 KE-435C,436C - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 13
－ 0025Q エンド End スタート Start 反転 Reverse 1/4 と 3/4 The inner clamping device operates at the 1/4-way and 3/4-way marks for the pattern being sewn. memo-13 ON 反転 Reverse 0026Q KE-435C,436C 10 - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 14
、436C） 2-5. Setting the memory switch (KE-436B, 436C) After changing the memory switch settings, press the power switch to turn the power off and the display screen (6). 5. Press the TEST switch (1). * The display will return to normal. 6. Make the following settings if necessary. 11 KE-435C,436C - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 15
the 1/4-way and 3/4-way marks for the pattern being sewn. memo-08 ON 反転 Reverse 0026Q 2-6 KE-436B、436C） 2-6. Setting the DIP switch (KE-436B, 436C) A の No.6 を"ON A の No.6 を"OFF Note: Be sure to turn not used, turn the selector No.6 on the DIP switch to "OFF". 1086Q KE-435C,436C 12 - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 16
adjust the position of the positioning plate L (5) so that the presser plate can be evenly laid out between the left and right seams (B). 2623Q 13 KE-435C,436C - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 17
can be horizontal when the reversal cylinder piston rod (1) is moved to the left extreme. 3-3-1. 確認（KE-436B、436C） 3-3-1. Verification (KE-436B, 436C) 2624Q 2973Q 1 1 2 2 3 4 3 5 5 6 6 7 R（8 (8). 4. Press the TEST switch (3) again to end the test mode. 2974Q 2975Q KE-435C,436C 14 - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 18
, while the lower exhaust air throttle valve adjusts the descending speed. • Solenoid valve (3)......for the work clamp plate • Solenoid valve (4)......for the positioning plates 15 KE-435C,436C - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 19
sewing end position (release the air and move the work clamp crank by hand) to check that the work clamps do not touch the needle. KE-435C,436C 16 - Brother International KE-435C | Inner Clamping Device Instruction Manual - Engli - Page 20
INSTRUCTION MANUAL 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone: 81-52-824-2177 Printed in Japan 118-P34 S91P34-021 2002.12.B(1)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
KE-435B, 435C
KE-436B, 436C
中押え反転装置〈エアー仕様〉
この説明書を読んでから、製品をご使用ください。
この説明書は、必要なときにすぐに取り出せる場所に、保管してください。
INNER CLAMPING DEVICE
〈
FOR PNEUMATIC
〉
Please read this manual before using the machine.
Please keep this manual within easy reach for quick reference.
取扱説明書
INSTRUCTION MANUAL