Brother International Laura Ashley Innov-ís NX2000 Users Manual - English
Brother International Laura Ashley Innov-ís NX2000 Manual
View all Brother International Laura Ashley Innov-ís NX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International Laura Ashley Innov-ís NX2000 manual content summary:
- Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 1
- Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 2
- Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 3
the plug, not the cord. 10. Keep fingers away from all moving parts. Special care is required around the machine needle. 11. Always use the proper the electrical outlet when making any other user servicing adjustments men- tioned in the instruction manual. 16. This sewing machine is not intended - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 4
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 5
declares that the product Product Name: Model Number: Brother Sewing Machine NX-2000 This device complies with Part 15 of the FCC Rules. Operation is subject to , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 6
other moving parts. 2. Remember to service center for examination, repair, electrical or mechanical adjustment. For a longer service troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 7
HOW TO USE THIS MANUAL Chapters 1 and 2 describe to the first-time user the initial rotate or resize them, and storing combined patterns. Chapter 1 Chapter 2 Chapter 4 • Parts related to operations described in the procedures are highlighted in blue. Perform the operations while comparing - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 8
CONTENTS NAMES OF MACHINE PARTS AND THEIR Scalloping 81 FUNCTIONS 9 Machine 9 Needle and Presser Foot Section 10 Operation Buttons 11 Included Accessories 11 Options 14 Chapter 1 Getting Ready 15 Top - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 9
the Race 138 Cleaning the Bobbin Case 139 ADJUSTING THE SCREEN 140 1 Screen Visibility Is Low 140 Touch Panel Is Malfunctioning 140 TROUBLESHOOTING 142 ERROR MESSAGES 145 SPECIFICATIONS 148 UPGRADING YOUR 2 MACHINE'S SOFTWARE 149 STITCH SETTING CHART 151 INDEX 159 3 4 5 6 7 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 10
8 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 11
AND THEIR FUNCTIONS NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Machine ■ Front View ■ Right-side/Rear View a Top cover Open the top cover to thread the machine and wind the bobbin. b Thread guide plate Pass the thread around the thread guide plate when threading the upper thread. c Thread take - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 12
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Needle and Presser Foot Section a h Needle plate The needle plate is marked with guides to help sew straight seams. i Needle bar thread guide Pass the upper thread through the needle bar thread guide. j Needle clamp screw Use the needle clamp screw - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 13
Operation Buttons NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Included Accessories The accessories are stored in the flat bed attachment. Open the flat bed attachment as shown below. a "Start/Stop" button - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 14
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17*1 18 19 34 35 36 37 38*2 39 40 41 42 43 44 *1 See Circular Attachment Instruction Manual for detailed instruction. *2 See Bobbin Work Instruction Manual for detailed instruction. 12 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 15
XD0745-051 41 Operation Manual XE8166-001 42 Quick Reference Guide XE8167-001 43 Wide table XE0802-101 44 Soft cover XE1121-001 *1 See Circular Attachment Instruction Manual for detailed instruction. *2 See Bobbin Work Instruction Manual for detailed instruction. Memo (For U.S.A. only - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 16
Name 1 Quilting foot 2 1/4" quilting foot 3 Side cutter foot 4 Spool stand Part Code U.S.A./ Canada Others SA129 F005N SA125 F001N SA177 F054 SA542 TS3 Memo • All specifications are correct at the time of printing. • Please be aware that - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 17
1 1 Chapter Getting Ready TURNING THE MACHINE ON/OFF 16 LCD SCREEN 17 ■ Display Precautions...17 ■ Key Functions ...18 Using the Machine Setting Mode Key 20 Using the Machine Operation Mode Key 21 ■ Contents of Each Category 21 Using the Pattern Explanation Key 22 LOWER/UPPER THREADING 23 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 18
unattended, either the main switch of the machine should be turned to OFF or the plug must be removed from the socket-outlet. • When servicing the machine or when removing covers, either the machine or the electrical set must be unplugged. • For U.S.A. only This appliance has a polarized plug (one - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 19
objects. In addition, do not press the display with 1 extreme pressure, otherwise damage to the display may result. Getting Ready • All or part of the display may sometimes become darker or lighter due to fluctuations in the surrounding temperature or other changes in the environment. This is - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 20
key Utility stitch key Press this key when changing the needle or presser foot. Pressing this key locks all keys and operation buttons so that parts can safely be changed. Press this key again to unlock the keys and buttons. When machine operations are displayed, the screen for the needle/presser - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 21
the appropriate stitch for a sewing 52 key application and when you need instructions on how to sew a selected stitch. This key is very helpful for the selected stitch saved settings to the original settings. 51 q Manual memory key Change the stitch settings (zigzag width and stitch length, - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 22
], [Japanese], [Danish], [Norwegian], [Finnish], [Swedish], [Portuguese], [Russian] Memo The latest version of software is installed in your machine. Check with your local authorized Brother dealer or our web site (http://solutions.brother.com) for notification of available updates (see page 149). - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 23
Manual are stored in this machine. Press to open the screen shown below. Six categories are displayed at the top of the screen. Press a key to 1 see more information about that category. ■ Contents of Each Category Names of Machine Parts and Their Functions Sewing Basics Troubleshooting - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 24
and then press to see a description of the selected stitch. Example: Displaying information on the use for . a Select , and then press . → The instructions for threading the machine appear. d Press to view the next page. * Press or to scroll through additional information for that page - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 25
. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, SFB: XA5539-051). 11.5 mm (approx. 7/16 inch) Actual size This model Other models a Supplemental spool pin d Place the spool of thread - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 26
thread with your left hand, and then pass the thread through the thread guide. i Slide the bobbin holder to the left until it snaps into place. four or five times. 2 3 1 h Pass the end of the thread through the guide slit in the bobbin winder seat, and then pull the thread to the right to - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 27
its original position. f While holding the thread from the spool with both hands, pull the thread through the lower notch in the thread guide plate, then through 1 the upper notch. Getting Ready 6 54 9 b a o l 1 a Turn on the machine. b Open the top cover. c Align the groove in the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 28
in the next section. e Lightly hold down the bobbin with your right hand, and then, while slightly pulling the thread with your left hand, guide it through the groove. CAUTION • Use a bobbin thread that has been correctly wound. Otherwise, the needle may break or the thread tension will be - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 29
LOWER/UPPER THREADING b Guide the bobbin thread through the groove, following the arrow in the illustration. Upper Threading Note • Do not cut the thread with the cutter. • Do not - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 30
the end of the thread with your left hand, and then guide the thread through the groove, following the arrows in the illustration. on the spool pin. * Make sure that the thread unwinds from the front. h Guide the thread down, up, then down through the groove, as shown in the illustration. - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 31
out about 80 mm (approx. 3 inches) of thread after passing it through the thread guide disks (marked "7"). o Pull out about 100 mm (approx. 3-4 inches) of the passing the thread through the needle bar thread guide (marked "6"), manually pass the thread through the eye of the needle from the front - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 32
end of this manual for patterns that can be used with the twin needle. CAUTION • Use only twin needles made for this machine (part code X59296-151). on page 33). c Pass the thread through the needle bar thread guide, and then manually thread the needle on the left side. * Do not use needle - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 33
needle setting → appears. a Shutter h Without passing the thread through the needle bar thread guide, manually thread the needle on the right side. a a Needle bar thread guide Note The needle threader cannot be used. Manually pass the thread through the eye of the needle from the front. If - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 34
CHANGING THE PRESSER FOOT CHANGING THE PRESSER FOOT CAUTION • Always press in the operation panel before changing the presser foot. If is not pressed and the "Start/Stop" button or another button is pressed, the machine will start and may cause injury. • Always use the correct presser foot for - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 35
CHANGING THE NEEDLE CHANGING THE NEEDLE CAUTION 1 Getting Ready • Always press in the operation panel before changing the needle. If is not pressed and the "Start/ Stop" button or another operation button is pressed accidentally, the machine will start and injury may result. • Use only - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 36
CHANGING THE NEEDLE c Use the included screwdriver to turn the needle clamp screw toward the front of the machine to loosen it, and then remove the needle. Note Do not apply extreme force when loosening or tightening the needle clamp screw, otherwise damage to the machine may result. d With - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 37
THE NEEDLE ■ About the Needle The sewing machine needle is probably the most important part of the sewing machine. Choosing the proper needle for your sewing project will result in a beautiful finish and fewer problems. Below are some things to keep in mind about needles. • The smaller the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 38
SEWING LARGE PIECES OF FABRIC SEWING LARGE PIECES OF FABRIC The wide table makes sewing large pieces of fabric easier. d When you are finished using the wide table, remove it. While slightly lifting up the wide table, pull it off to the left. CAUTION • Do not move the sewing machine while the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 39
2 2 Chapter Sewing Basics SEWING 38 Sewing a Stitch...38 ■ Using the Foot Controller 39 ■ Using the Knee Lifter...40 Sewing Reinforcement Stitches 40 Sewing Curves ...40 Changing Sewing Direction 41 ■ Sewing a Seam Allowance of 0.5 cm or Less 41 Sewing Heavyweight Fabric 41 ■ If the Fabric - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 40
attention to the needle while the machine is in operation. Keep your hands away from moving parts while the machine is in operation. • Do not stretch or pull the fabric during sewing g Lightly place your hands on the fabric to guide it, and then press the "Start/Stop" button to start sewing. 38 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 41
h To stop sewing, press the "Start/Stop" button again. SEWING ■ Using the Foot Controller You can also use the foot controller to start and stop sewing. CAUTION • Do not allow fabric pieces and dust to collect in the foot controller. Doing so could cause a fire or an electric shock. i Press the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 42
. For details, see "Automatic Reinforcement Stitching" on page 43. Sewing Curves Sew slowly while keeping the seam parallel with the fabric edge as you guide the fabric around the curve. Note When the presser foot is in raised position, move the knee lifter further to the right for the presser - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 43
left side of presser foot "J" pressed in, lower the presser foot lever. 2 * The presser foot remains level, enabling the fabric to be fed. Once the trouble spot has been sewn, the presser foot will return to its normal operation. Sewing Basics The pivot setting is useful when changing the sewing - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 44
of the settings as described in this section. Note • Settings for some stitches cannot be changed (See "STITCH SETTING CHART" at the end of this manual). • If a stitch setting is changed, but not saved, the stitch setting returns to its default when the machine is turned off or a different stitch is - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 45
USEFUL FUNCTIONS Adjusting the Thread Tension ■ Upper Thread Is Too Tight If the bobbin thread can be seen on the surface of The default thread tension, which is automatically set, can normally be used regardless of the type of thread or fabric being sewn. However, with some fabric and thread - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 46
USEFUL FUNCTIONS c Place the fabric under the presser foot with the needle at the starting point of the stitching, and then press the "Start/Stop" button. The machine will automatically sew reverse stitches (or reinforcement stitches), and then begin sewing. b Press to select the automatic - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 47
USEFUL FUNCTIONS d If the "Reverse/Reinforcement Stitch" button is pressed, the machine automatically sews reverse stitches (or reinforcement stitches), cuts the thread, then stops. Pivoting If the pivot setting is selected, the machine stops with the needle lowered (in the fabric) and the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 48
USEFUL FUNCTIONS a Select a stitch. b Press to select the pivot setting. e Rotate the fabric, and then press the "Start/ Stop" button. → The key appears as . c Place the fabric under the presser foot with the needle at the starting point of the stitching, and then press the "Start/Stop" - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 49
USEFUL FUNCTIONS b Press to display P. 2, and then set the "AUTOMATIC FABRIC SENSOR SYSTEM" to Locking the Screen "ON". If the screen is locked before starting to sew, the various settings, such as the stitch width and stitch length, are locked and cannot be changed. This prevents screen - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 50
USEFUL FUNCTIONS 48 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 51
Needle Position (Left or Middle Needle Position Stitches Only) .... 56 ■ Basting 56 ■ Aligning the fabric with the stitch guide foot ....... 56 ■ Aligning the fabric with the seam guide 57 ■ Using the Straight Stitch Needle Plate and the Straight Stitch Foot 57 Darts Seams 59 Gathering 60 Flat - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 52
SELECTING A UTILITY STITCH SELECTING A UTILITY STITCH ■ Stitch Selection Screens Press to display the previous or next page. Straight/Overcasting/Quilting Stitches Decorative Stitches/Heirloom Stitches Buttonholes/Bar tacks Multi-Directional Sewing Quilting Stitches 50 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 53
displayed below the symbol of the appropriate presser foot. Memo For details on the stitches, refer to "STITCH SETTING CHART" at the end of this manual. ■ Using the Mirror Image Key Press so that it appears as . A mirror image of the selected stitch is created. Note If appears as after - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 54
or when you need information on how certain stitches are used, press , select the appropriate stitch for your project, and then follow the instructions to sew the selected stitch. We recommend that beginners use this method to select stitches. Memo P. 1 appears if is pressed while a quilting - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 55
Example: Displaying information about piecing. a Press . SELECTING A UTILITY STITCH c Select a stitch. * Press to return to the previous screen. 3 Utility Stitches → The sewing type selection screen is displayed. b Press . → Directions for sewing the selected stitch are displayed. d - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 56
) Triple stretch stitch Stretch stitch Decorative stitch Basting stitch Presser Foot Applications Stitch width [mm (inch)] Auto Manual General sewing, gather, pintuck, etc. Reverse stitch is sewn while 0.0 pressing "Reverse/ (0) Reinforcement Stitch" button. 0.0 - 7.0 (0 - 1/4) General - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 57
a Select a stitch. SEWING THE STITCHES f At the end of the stitching, hold the "Reverse/ Reinforcement Stitch" button pressed to sew reverse stitches (or reinforcement stitches). g Press the "Thread Cutter" button to trim the threads. b Attach presser foot "J". c Hold the thread ends and - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 58
and 30 mm (approx. 3/16 and 1-3/16 inches). a a Between 5 mm (approx. 3/16 inch) and 30 mm (approx. 1-3/16 inches) c Sew while lightly guiding the fabric. J J J J 12.0 mm (approx. 1/2 inch) 8.5 mm (approx. 11/32 inch) 6.5 mm (approx. 1/4 inch) 5.0 mm (approx. 3/16 inch) Memo For a standard - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 59
• Tighten the thumbscrew securely, otherwise the needle might hit the seam guide and injury may occur. ■ Using the Straight Stitch Needle Plate and puckering on lightweight fabrics. The small opening on the foot provides support for the fabric as the needle travels through the fabric. CAUTION - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 60
SEWING THE STITCHES d Grasp the bobbin case, and then pull it out. g Insert the bobbin case so that the ▲ mark aligns with the ● mark as shown below, and then attach the needle plate cover. a Bobbin case e Use the disc-shaped screwdriver included with the machine to unscrew and remove the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 61
SEWING THE STITCHES j Start sewing. * After sewing, make sure to remove the straight stitch needle plate and the straight stitch foot, and reinstall the regular needle plate, the needle plate cover and the presser foot "J". Memo To prevent puckering on fine fabrics, use a fine needle, size 75/11, - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 62
SEWING THE STITCHES Gathering Sew gathers on sleeves, the waist of a gathered skirt, etc. a Select a straight stitch, and then attach presser foot "J". e Pull the bobbin threads to create the desired amount of gathering, and then tie the threads. f Smooth the gathers by ironing them. b Set - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 63
d Lay both seam allowances on the side of the shorter one (cut seam allowance) and iron them flat. a SEWING THE STITCHES Pintucks Use pin tucks to decorate blouses. a Mark the positions of the folds on the wrong side of the fabric. a Wrong side of fabric a e Fold the longer seam - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 64
, zigzag sew at left. Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto Manual 3.5 (1/8) 0.0 - 7.0 (0 - 1/4) 1.4 0.0 - 4.0 (1/16) (0 - 3/16) 3.5 (1/8) 0.0 - 7.0 (0 - 1/4) 1.4 0.0 - 4.0 (1/16) (0 the edge. Memo For additional applique instructions, see page 73. 62 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 65
both pieces. ■ Sewing Curves Shorten the stitch length setting to obtain a fine stitch. Sew slowly, keeping the seams parallel with the fabric edge as you guide the fabric around the curve. SEWING THE STITCHES 3 Utility Stitches 63 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 66
Stitch Key Stitch Name 2 step elastic zigzag 3 step elastic zigzag Presser Foot Applications Stitch width [mm (inch)] Auto Manual For overcasting (medium weight and stretch fabrics), attaching 5.0 tape and elastic (3/16) 1.5 - 7.0 (1/16 - 1/4) For overcasting (medium, heavyweight and - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 67
width [mm (inch)] Auto Manual 3.5 2.5 - 5.0 (1/8) (3/32 - 3/16) Stitch length [mm (inch)] Auto Manual 2.0 1.0 - 4.0 (1/16) break and cause injury. G a b Lower the presser foot so that the presser foot guide is flush against the edge of the fabric. a The needle should not touch • If the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 68
Presser Foot Applications Reinforced seaming of stretch fabric Stitch width [mm (inch)] Auto Manual 5.0 (3/16) 0.0 - 7.0 (0 - 1/4) Stitch length [mm (inch)] Auto Manual 2.5 0.5 - 4.0 (3/32) (1/32 - 3/16) Reinforcing of medium stretch fabric and heavyweight fabric, decorative stitching - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 69
listed below. Using another stitch may cause the needle to hit the presser foot and break, possibly causing injury. Memo Thread the needle manually when using the side cutter, or only attach the side cutter after threading the needle using the needle threader. Stitch width Stitch length Stitch - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 70
the fabric so that the right side of the cut is on top of the guide plate and the left side of the cut is underneath the presser foot. a b a Guide plate (lower knife) b Presser foot g Thread the needle manually and pull out a long section of the upper thread. Pass it below the presser - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 71
Key Stitch Name Presser Foot Applications Piecing stitch (Middle) Piecework/patchwork Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto Manual Twin Needle - - 2.0 0.2 - 5.0 (1/16) (1/64 - 3/16) NO Utility Stitches Piecing stitch (Right) Piecing stitch (Left) Hand - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 72
Key Stitch Name Overcasting stitch Presser Foot Applications Stretch knit seam Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto Manual Twin Needle 5.0 (3/16) 0.0 - 7.0 (0 - 1/4) 4.0 1.0 - 4.0 (3/16) (1/16 - 3/16) NO Tape attaching Attaching tape to seam in stretch - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 73
Auto Manual Quilting stitch made to look like hand quilting stitch 0.0 (0) 0.0 - 7.0 (0 - 1/4) Stitch length [mm (inch)] Auto Manual Twin can be saved (see page 51). ■ Piecing Using the 1/4" Quilting Foot with Guide This quilting foot can sew an accurate 1/4 inch or 1/8 inch seam allowance. - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 74
fabric aligned with the left side of the presser foot end. a a a Guide b 1/4 inch Memo For accurate fabric placement, refer to "Needle Plate and the feed dogs in the needle plate during sewing. Memo Thread the needle manually when using the walking foot, or only attach the walking foot after - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 75
fabric secure while sewing. b Adjust the stem of the quilting guide so that the guide aligns with the seam that has already been sewn. Note Utility Stitches the seam allowance using an iron. a Insert the stem of the quilting guide into the hole at the rear of the walking foot or presser foot - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 76
SEWING THE STITCHES e Check the needle drop point, and then sew along the edge of the appliqué while making sure that the needle drops slightly off the edge of the fabric. a e Set "WIDTH CONTROL" to "ON". The sewing speed will be adjusted using the foot controller. a Needle drop point - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 77
SEWING THE STITCHES ■ Free-motion Quilting For free-motion quilting, use free-motion quilting foot "C" and free-motion open toe quilting foot "O" depending on the stitch that is selected, and set the machine to free-motion sewing mode. In this mode, the feed dogs are automatically lowered so the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 78
SEWING THE STITCHES f Use both hands to stretch the fabric taut, and then move the fabric at a regular pace in order to sew uniform stitches roughly 2.0-2.5 mm (approx. 1/16 - 3/32 inch) in length. a Press to lower the feed dogs and to set the machine to free-motion sewing mode. a a Stitch - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 79
characteristic of this quilting style. Use the free-motion echo quilting foot "E" for echo quilting. Using the measurement on the presser foot as a guide, sew around the motif at a fixed interval. We recommend attaching the foot controller and sewing at a consistent speed. CAUTION • Be sure to - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 80
the feed dogs and to set the machine to free-motion sewing mode. f Tighten the screw. g Using the measurement on the quilting foot as a guide, sew around the motif. b Select a straight stitch with the middle (center) needle position or . c Follow the steps on page 32 "Removing the Presser - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 81
fabric Stitch width [mm (inch)] Auto Manual 00 3← − →3 Stitch length [mm (inch)] Auto Manual 2.0 1.0 - 3.5 (1/16) (1/16 Attach presser foot "R", and then lower the presser foot so that the presser foot guide is flush against the fold of the fabric. b Place the fabric wrong side up - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 82
an unattractive finish. If either of these occur, follow the instructions below to correct the problem. ■ If the Needle Does Not Catch the Fold Press in on the stitches, refer to the "STITCH SETTING CHART" at the end of this manual. c Attach the open toe foot, and then sew along the edge of the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 83
side. Memo For details on the stitches, refer to the "STITCH SETTING CHART" at the end of this manual. b Increase the thread tension for an attractive scalloped finish to the shell tuck stitching. Memo If the thread the stitches, refer to the "STITCH SETTING CHART" at the end of this manual. 81 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 84
SEWING THE STITCHES b Leave a seam when sewing the scallop stitches so that the pattern is not sewn directly on the edge of the fabric. Note Sew test stitches on the fabric before sewing on your project. c Turn the fabric over so the right side faces up, and then sew over the seam with the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 85
Stitches J h Pull out the straight stitch threads. Memo For details on the stitches, refer to the "STITCH SETTING CHART" at the end of this manual. c Attach presser foot "J", and then sew with the presser foot centered between the two pieces of fabric. Memo This stitch is more decorative when - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 86
Up the Bobbin Thread" on page 26). f Press or . Memo For details on the stitches, refer to "Stitch Setting Chart" at the end of this manual. g While pulling the elastic tape so that it is about the same length as the fabric, pull the fabric at the pin nearest the front - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 87
be obtained if you use a "130/705H Wing" needle when sewing these patterns. If using a wing needle and the stitch width has been set manually, check that the needle will not touch the presser foot by carefully rotating the handwheel before starting sewing. Note The needle threader cannot be used - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 88
Drawn Work (2)) b Press , and then attach presser foot "N". Memo For details on the stitches, refer to the "STITCH SETTING CHART" at the end of this manual. c With the surface of the fabric facing up, sew along the right edge of the open area. N d Press stitch. to create a mirror image of the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 89
Foot Applications Buttonhole on light to medium weight fabrics Stitch width [mm (inch)] Auto Manual 5.0 3.0 - 5.0 (3/16) (1/8 - 3/16) Stitch length [mm (inch)] Auto Manual 0.4 0.2 - 1.0 (1/64) (1/64 - 1/16) Twin Needle NO Wide round ended buttonhole Buttonholes with extra space - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 90
presser foot Note • Slide the outside frame of the buttonhole foot backward as far as possible, making sure that there is no gap behind the part of the foot marked "A", as shown in the illustration. If the buttonhole foot is not slid back as far as possible, the buttonhole will not - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 91
f Gently hold the end of the upper thread, and then start sewing. * Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. * If the automatic thread cutting setting is selected before sewing, the machine will automatically cut the thread at the end of - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 92
SEWING THE STITCHES ■ Sewing Stretch Fabrics When sewing a buttonhole on stretch fabrics, press or , and use a gimp thread. a Hook the gimp thread onto the back of buttonhole foot "A", and then pull the ends of the gimp thread under the presser foot. Pass the thread ends through the grooves at - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 93
Name Darning Darning Presser Foot Applications Stitch width [mm (inch)] Auto Manual Darning of medium weight fabric 7.0 (1/4) 2.5 - 7.0 (3/32 as far as possible, making sure that there is no gap behind the part of the foot marked "A", as shown in the illustration. If the buttonhole - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 94
tack Presser Foot Applications Reinforcement at opening of pocket, etc. Stitch width [mm (inch)] Auto Manual 2.0 1.0 - 3.0 (1/16) (1/16 - 1/8) Stitch length [mm (inch)] Auto Manual 0.4 0.3 - 1.0 (1/64) (1/64 - 1/16) Twin Needle NO a Press . b Set the scale on buttonhole foot "A" to - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 95
. 1/16 inch) Note • Slide the outside frame of the buttonhole foot backward as far as possible, making sure that there is no gap behind the part of the foot marked "A", as shown in the illustration. If the buttonhole foot is not slid back as far as possible, the bar tack will - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 96
Stitch Key Stitch Name Button sewing Presser Foot Applications Attaching buttons Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto Manual 3.5 2.5 - 4.5 (1/8) (3/32 - 3/16) - - Twin Needle NO a Press . → automatically changes to dogs are lowered. , and the feed - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 97
Name Eyelet Presser Foot Applications For making eyelets, holes on belts, etc. Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto Manual Twin Needle 7.0 7.0 6.0 5.0 7.0 7.0 6.0 5.0 (1/4) (1/4 15/64 3/16) (1/4) (1/4 15/64 3/16) NO a Press , and then attach presser foot - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 98
stitches, refer to the "STITCH SETTING CHART" at the end of this manual. d Insert the needle into the fabric at the starting point of the stitching e Press , and then sew seam 2. * The fabric will move sideways, so guide the fabric with your hands to sew straight. b Pass the free-arm through the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 99
sew seam 4. * The fabric will move sideways, so guide the fabric with your hands to sew straight. SEWING THE For details on the stitches, refer to the "STITCH SETTING CHART" at the end of this manual. b Attach presser foot "J", sew straight stitches up to the zipper opening, and then sew basting - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 100
SEWING THE STITCHES ■ Side Zipper Use for side zippers on skirts or dresses. a Press . * Be sure to select the straight stitch with the middle (center) needle position. d Remove presser foot "J", and then attach the presser foot holder to the pin on the right side of zipper foot "I". a c b a - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 101
h Close the zipper, turn the fabric over so that the surface faces up, and then baste the other side of the zipper to the fabric. a c b d a Front of garment (wrong side of fabric) b Back of garment (surface of fabric) c Basting d Front of garment (surface of fabric) i Remove the presser foot - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 102
SEWING THE STITCHES 100 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 103
4 4 Chapter Character/ Decorative Stitches SELECTING STITCH PATTERNS 102 ■ Stitch Selection Screens ...102 Selecting Decorative Stitch Patterns/7 mm Decorative Stitch Patterns/Satin Stitch Patterns/ 7 mm Satin Stitch Patterns/Cross Stitch Patterns/Utility Decorative Stitch Patterns 103 Alphabet - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 104
SELECTING STITCH PATTERNS SELECTING STITCH PATTERNS ■ Stitch Selection Screens Press to display the screen shown below. a b c d e f g h i j k l m a Decorative stitch patterns b 7 mm decorative stitch patterns c Satin stitch patterns d 7 mm satin stitch patterns e Cross stitch patterns - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 105
Selecting Decorative Stitch Patterns/ 7 mm Decorative Stitch Patterns/ Satin Stitch Patterns/ 7 mm Satin Stitch Patterns/Cross Stitch Patterns/Utility Decorative Stitch Patterns SELECTING STITCH PATTERNS c To combine patterns, select the next pattern. * Press to check the selected pattern - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 106
SELECTING STITCH PATTERNS b Press to display a selection b Press . screen of characters, and then select a character. Repeat this step until you have selected all of the characters. * If a wrong character was selected, press to erase the character, and then select the new character. * To - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 107
be sure to affix stabilizer material to the fabric. • While sewing, guide the fabric with your hands so that it will be fed straight. Fabric - #60 4 Needle With lightweight, regular, or stretch fabrics: Brother ballpoint needle (golden colored) With heavyweight fabrics: home sewing machine - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 108
SEWING STITCH PATTERNS e Press the "Start/Stop" button to stop the machine, and then press the "Reverse/ Reinforcement Stitch" button to sew reinforcement stitches. Memo • When sewing character stitch patterns, the machine automatically sews reinforcement stitches at the end of the stitching, - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 109
d Press . SEWING STITCH PATTERNS e Sew the pattern again. If the pattern still is not sewn correctly, adjust it again. Continue making adjustments until the pattern is sewn correctly. Memo You can sew with the settings screen on the display. f After the pattern is sewn correctly, quit - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 110
EDITING STITCH PATTERNS EDITING STITCH PATTERNS Using the editing functions, you can change the patterns in a variety of ways, such as resizing them or flipping them to create a mirror image. Memo Depending on the pattern that is selected, some editing functions may not be available. a b f e c d - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 111
Changing the Pattern Size After selecting a stitch pattern, press desired size is selected. until the EDITING STITCH PATTERNS Creating a Vertical Mirror Image After selecting a stitch pattern, press pattern vertically. to flip the Memo • Stitch patterns entered after the pattern size was - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 112
EDITING STITCH PATTERNS Selecting a Single/Repeating Pattern Press to select whether the pattern is sewn repeatedly or once. Changing the Thread Density (Satin Stitch Patterns Only) After selecting a stitch pattern, press desired stitching density is selected. until the Memo If you press - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 113
Returning to the Beginning of the Pattern When sewing character/decorative stitches, you can return to the beginning of the pattern after trial sewing or when the stitching is sewn incorrectly. Memo This function is not available for the stitches in the category. a Press the "Start/Stop" button - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 114
COMBINING STITCH PATTERNS COMBINING STITCH PATTERNS You can combine many varieties of stitch patterns, such as character stitches, cross stitches, satin stitches, or stitches you design with MY CUSTOM STITCH function (see chapter 7 for information about MY CUSTOM STITCH). You can also combine stitch - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 115
d Press . e Press . COMBINING STITCH PATTERNS Memo • Press to erase the last pattern entered. Patterns are erased one at a time. • If the entire combined pattern cannot be displayed, press to view an image of the pattern. Press to return to the previous screen. 4 → The image of the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 116
COMBINING STITCH PATTERNS Combining Stitch Patterns of Different Sizes Example: c Press again, and then press appears as . so that it a Press . → The second pattern is displayed in the smaller size. d To repeatedly sew the pattern combination, press so that it appears as . b Press . → - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 117
COMBINING STITCH PATTERNS Combining Stitch Patterns of Different Orientations Example: c Press again, and then press appears as . so that it a Press . b Press . → The second pattern is flipped horizontally. 4 d To repeatedly sew the pattern combination, press so that it appears as . - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 118
COMBINING STITCH PATTERNS Combining Stitch Patterns of Different Lengths c Press again, and then press times so that it appears as . three a Press . → The second pattern is displayed with a length of 2. d To repeatedly sew the pattern combination, press so that it appears as . b Press - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 119
COMBINING STITCH PATTERNS Creating Step Patterns (7 mm Satin Stitch Patterns Only) b Press , and then press . Stitch patterns that are shifted to create a step-shaped pattern are called step patterns. Step patterns can be created by using and to shift 7 mm satin stitch patterns. Press once to - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 120
COMBINING STITCH PATTERNS ■ Examples of Pattern Combinations →→→→ →→→ 118 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 121
98SE requires a driver. Download the driver from our Web site (http://solutions.brother.com). In addition, only a Press . Windows 98 Second Edition can use the . Each company whose software title is mentioned in this manual has a software license agreement specific to its proprietary programs - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 122
USING THE MEMORY FUNCTION b Press . * Press to return to the previous screen without saving the stitch pattern. b Select a stitch pattern to be deleted. * Press to display the next page. * Only the first entry of each stitch pattern is displayed in the memory. Press pattern. to view the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 123
with force, and then check the orientation of the connector. • For details on the position of the USB port on the computer, refer to the instruction manual for the corresponding equipment/computer. b Press . 121 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 124
USING THE MEMORY FUNCTION c Press . * Press to return to the previous screen without saving the stitch pattern. Retrieving Stitch Patterns from the Machine's Memory a Press . → The stitch pattern is temporarily saved to "Removable Disk" under "My Computer". d Select the stitch pattern's . - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 125
c Press * Press . to delete the stitch pattern. USING THE MEMORY FUNCTION c Move/copy Disk". the pattern data to "Removable → The selected stitch pattern is retrieved and the sewing screen appears. Retrieving Stitch Patterns from the Computer a Plug the USB cable connectors into the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 126
USING THE MEMORY FUNCTION e Select a stitch pattern to be retrieved. * Press to view the entire stitch pattern. * Press to return to the previous screen without retrieving the stitch pattern. a a Saved stitch patterns f Press * Press . to delete the stitch pattern. CAUTION • When - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 127
MY CUSTOM STITCH DESIGNING A STITCH 126 ■ Examples of Custom Stitches 127 ENTERING STITCH DATA 128 ■ Key Functions ...128 ■ Moving a Point ...130 ■ Moving Part or All of the Design 131 ■ Inserting New Points ...132 USING STORED CUSTOM STITCHES 133 Saving Custom Stitches in the Machine's Memory - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 128
MY CUSTOM STITCH™ if you first draw the stitch on the included grid sheet. a Draw the stitch design code SA507, GS3). on the grid sheet (part b Decide the spacing of the stitch. * By adjusting the spacing of a stitch, you can create various patterns with one stitch. Memo Simplify the design - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 129
DESIGNING A STITCH ■ Examples of Custom Stitches Stitch 1 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 12 18 22 23 21 17 14 12 9 6 3 1 3 6 0 0 3 6 10 13 14 13 11 13 14 13 10 6 3 Stitch 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 12 41 43 40 41 38 35 32 30 32 35 41 45 47 44 0 0 4 7 11 13 14 13 10 6 3 0 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 130
ENTERING STITCH DATA ENTERING STITCH DATA ■ Key Functions d a c b f e h g k i j m l a This area displays the stitch being created. b Displays the number of the present set point over the total number of points in the stitch. c Displays the y-coordinate of over the x-coordinate of . No - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 131
a Press . b Press . d Press ENTERING STITCH DATA to add the point indicated by . e Select whether one stitch or three stitches will be sewn between the first two points. * To sew three stitches, press the key so that it appears as . c Use to move to the coordinates of the first point on - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 132
ENTERING STITCH DATA h Press . ■ Moving a Point a Press that you or want to to move move. to the point * To move to the first point, press . * To move to the last point, press . * You can also move by using the touch pen. Memo • If you have entered points that are too close - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 133
■ Moving Part or All of the Design a Press or to move to the first point of the section that you want to move. * To move to the - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 134
ENTERING STITCH DATA ■ Inserting New Points a Press or to move to a place on the design where you want to add a new point. * To move to the first point, press . * To move to the last point, press . * You can also move by using the touch pen. c Use to move the point. b Press . → A - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 135
USING STORED CUSTOM STITCHES USING STORED CUSTOM STITCHES Saving Custom Stitches in the Machine's Memory Stitch patterns created using the MY CUSTOM STITCH™ function can be saved for later use. The machine's memory can hold up to 15 custom stitches. Note Do not turn off the machine while the " - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 136
USING STORED CUSTOM STITCHES b Select a custom stitch to be deleted. * Press to view the entire custom stitch. * Press stitch. if you do not want to delete the custom d Press . * If you decide not to delete the custom stitch, press . a Saved custom stitches c Press . a → The old custom - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 137
Retrieving Custom Stitches from the Machine's Memory a Press . USING STORED CUSTOM STITCHES c Press * Press . to delete the custom stitch. → The selected custom stitch is retrieved and the sewing screen appears. → The pocket selection screen appears. Retrieving Custom Stitches from the b - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 138
USING STORED CUSTOM STITCHES 136 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 139
138 Cleaning the Race 138 Cleaning the Bobbin Case 139 ADJUSTING THE SCREEN 140 Screen Visibility Is Low 140 Touch Panel Is Malfunctioning 140 TROUBLESHOOTING 142 ERROR MESSAGES 145 ■ Alarm ...147 SPECIFICATIONS 148 UPGRADING YOUR MACHINE'S SOFTWARE 149 STITCH SETTING CHART 151 INDEX 159 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 140
CARE AND MAINTENANCE CARE AND MAINTENANCE CAUTION • Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result. Cleaning the LCD g Grasp the bobbin case, and then pull it out. If the surface of the LCD is dirty, lightly wipe it with a soft dry cloth. Do not - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 141
Therefore, the bobbin case should be cleaned as necessary should tension problems arise. When cleaning the bobbin case, use business card stock or performance may suffer. • For a new bobbin case (part code: XC3153-351 (black), part code: SABWRK1/BWRK1 (gray)), contact your nearest authorized dealer - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 142
ADJUSTING THE SCREEN ADJUSTING THE SCREEN Screen Visibility Is Low If the screen is difficult to read when the machine is turned on, follow the procedure described below. a Turn off the machine, hold your finger anywhere on the screen, and then turn the machine on. Touch Panel Is - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 143
c Using the included touch pen, lightly touch the center of each ×, in order from 1 to 5. * If the buzzer sounds one time after you press number 5, the operation is finished, and "SUCCESS" appears on the screen. If the buzzer sounds twice, there was an error. In this case, repeat the steps above. - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 144
authorized dealer. Memo This machine is equipped with a simple troubleshooting feature that can be used in case minor problems occur during sewing. Press , and then press to display a list of problems. Press the key for the appropriate problem, and then check for the causes that are displayed - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 145
TROUBLESHOOTING Problem Cause Solution Page High-pitched sound while Dust or lint is caught in the feed dogs. Remove the dust or lint. 138 sewing Pieces of - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 146
TROUBLESHOOTING CAUTION • This machine is equipped with a thread detection device. If the "Start/Stop" button is pushed before disconnected during sewing: Turn the main power to OFF and unplug the machine. If you restart the machine, follow the instructions for operating the machine correctly. 144 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 147
machine stops and informs you of the error with an alarm and an error message. If an error message appears, correct the problem according to the instructions in the message. (The message that is displayed can be cancelled either by pressing or performing the operation correctly.) This message is - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 148
ERROR MESSAGES This message is displayed when is pressed while the presser foot is raised. This message is displayed when or is pressed after a pattern is selected. This message is displayed when is pressed while a utility stitch is selected. This message is displayed when a stitch other than a - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 149
This message is displayed when the machine is set for twin needle sewing and a pattern that cannot be sewn with the twin needle is selected. This message is displayed when you try to sew with a stitch other than a middle needle position stitch while the single-hole needle plate is installed. This - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 150
SPECIFICATIONS SPECIFICATIONS Sewing Machine Dimensions Item Case dimensions Weight Sewing speed Needle Specification 51.1 cm (W) × 30.5 cm (H) × 25.8 cm (D) (approx. 20-1/8 inches (W) × 12 inches (H) × 10-1/8 inches (D)) 58.2 cm (W) × 31.9 cm (H) × 28.4 cm (D) (approx. 22-7/8 inches (W) × 12 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 151
You can use a computer to download software upgrades for your sewing machine. When an upgrade program is available on "http://solutions.brother.com", please download the files following the instructions on the web site and steps below. Note There are two upgrade files. Be sure to download both files - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 152
UPGRADING YOUR MACHINE'S SOFTWARE h When the following screen appears, upgrading is completed. Press LOAD after saving the upgrade file in the machine. Upgrade complete. Note If an error occurred, an error message appears. At this time, turn the machine off, and then start the procedure again - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 153
Foot Applications Stitch Width [mm (inch)] Auto Manual General sewing, gather, pintuck, etc. Reverse stitch sewing and decorative applications 1.0 1.0 - 3.0 (1/16) (1/16 - 1/8) Stitch Length [mm (inch)] Auto Manual 2.5 0.2 - 5.0 (3/32) (1/64 - 3/16) 2.5 0.2 - 5.0 (3/32) (1/64 - 3/16 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 154
and elastic Reinforcing of light and medium weight fabrics Stitch Width [mm (inch)] Auto Manual Stitch Length [mm (inch)] Auto Manual Twin Needle 5.0 1.5 - 7.0 1.0 0.2 - 4.0 OK (3/16) (1/16 - 1/4) (1/16) (1/64 - 1/16) ( J ) 3.5 2.5 - 5.0 2.0 1.0 - 4.0 (1/8) (3/32 - 3/16) (1/16) (1/16 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 155
Key Stitch Name Piecing stitch (Right) Piecing stitch (Middle) Presser Foot Applications Stitch Width [mm (inch)] Auto Manual Piecework/patchwork 6.5 mm (approx. 1/4 inch) right 5.5 seam allowance (7/32) 0.0 - 7.0 (0 - 1/4) Piecework/patchwork - - Stitch Length [mm (inch)] Auto - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 156
Hemstitching Presser Foot Applications Decorative stitching Stitch Width [mm (inch)] Auto Manual 4.0 (3/16) 0.0 - 7.0 (0 - 1/4) Stitch Length [mm (inch)] Auto Manual Twin Needle 3.0 2.0 - 4.0 (1/8) (1/16 - 3/16) NO Decorative top stitching 4.0 0.0 - 7.0 2.5 1.0 - 4.0 OK (3/16 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 157
buttonhole Heirloom buttonhole Presser Foot Applications Heirloom, decorative hems Stitch Width [mm (inch)] Auto Manual Stitch Length [mm (inch)] Auto Manual Twin Needle 5.0 1.5 - 7.0 2.5 1.5 - 4.0 (3/64) (1/16 - 1/4) (3/32) (1/16 - 3/16) NO Heirloom, decorative hems 6.0 (15/ 64 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 158
The first step in making bound buttonholes 5.0 (3/16) 0.0 - 6.0 (0 - 15/64) Stitch Length [mm (inch)] Auto Manual Twin Needle 2.0 0.2 - 4.0 (1/16) (1/64 - 3/16) NO Buttonholes in heavyweight or thick fabrics for larger flat buttons 7.0 (1/4) 3.0 - 7.0 0.5 0.3 - 1.0 (1/8 - 1/4) (1/32 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 159
corners For attaching appliqué on tubular pieces of fabric and mitering corners Stitch Width [mm (inch)] Auto Manual - - - - Stitch Length [mm (inch)] Auto Manual - - - - Twin Needle NO NO Stitch Key Stitch Name Presser Foot Applications Piecing stitch (Middle) Piecework/patchwork - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 160
overcast Overcasting stitch Presser Foot Applications Stretch knit seam Stitch Width [mm (inch)] Auto Manual 5.0 (3/16) 0.0 - 7.0 (0 - 1/4) Stitch Length [mm (inch)] Auto Manual Twin Needle 4.0 1.0 - 4.0 (3/16) (1/16 - 3/16) NO Attaching tape to seam in stretch fabric 5.5 (7/32 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 161
26 , bobbin cover 10 26 bobbin holder 24 bobbin thread inserting 26 pulling up 26 winding 23 bobbin winder 9 bobbin winding thread guide 9, 24, 25 button sewing 94 buttonhole lever 10, 88, 92 buttonhole stitches 87 C character/decorative stitches adjusting 106 combining 112 editing 108 - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 162
128 key functions 128 N needle changing the position 56 fabric/thread/needle combinations 35 replacing 33 settings 17 twin needle 30 needle bar thread guide 10 28, 30 needle clamp screw 10 , needle mode selection key (single/twin 30 31 needle plate 10 , needle plate cover 10 138 needle - Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 163
- Brother International Laura Ashley Innov-ís NX2000 | Users Manual - English - Page 164