Brother International MFC 295CN Quick Setup Guide - Spanish

Brother International MFC 295CN - Color Inkjet - All-in-One Manual

Brother International MFC 295CN manual content summary:

  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 1
    and check the components Black 1 Yellow Cyan Magenta Starter Ink Cartridges [x4] Quick Setup Guide User's Guide CD-ROM Accessory Order the correct interface cable for the interface you want to use (for USB or network connection). USB cable Please make sure you use a USB 2.0 cable (Type
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 2
    to avoid paper jams and misfeeds. e Gently put the paper into the paper tray print side down and top edge first. Check that the paper is flat in the tray. When you use Legal size paper, press and hold the universal guide release button a as you slide out the front of the paper tray. c With
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 3
    the USB cable yet (if you are using a USB cable). a Connect the power cord. i While holding the paper tray in place, pull out the paper support a until it clicks, and then unfold the paper support flap b. Note The Warning LED on the control panel will stay on until you have installed the
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 4
    throw away the green protective part. You will need it if you transport the machine. d Unpack the ink cartridge. f Take care to match the color of the lever a with the cartridge color b, as shown in the diagram below. 1 2 g Install each ink cartridge in the direction of the arrow on the label. 4
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 5
    seep out of the cartridge. • If you mix the colors by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation. (See Cleaning the print head in Appendix B of the User's Guide.) • Once you open an ink cartridge, install it in
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 6
    step 6. OK d The LCD asks you if the print quality is OK for black and color. Press a (Yes) or b (No). Black OK? q a Yes b No Color OK? q a Yes b No After pressing a (Yes) or b (No) for both black and color, the LCD shows: Start Cleaning? q a Yes b No e Press a (Yes), the machine will then
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 7
    . Press OK. e Press Stop/Exit. 7 Set the LCD contrast (if needed) If you are having difficulty reading the LCD from your position, try changing the contrast setting. a Press Menu. b Press a or b to choose 0.Initial Setup. Press OK. c Press a or b to choose 2.LCD Contrast. Press OK. d Press a or
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 8
    8 Set the date and time Setting the date and time allows the machine to clean the print head regularly and maintain optimum print quality. It also allows the machine to name files created when using the Scan to Media feature. a Press Menu. b Press a or b to choose 0.Initial Setup.
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 9
    Windows® Macintosh Windows® Macintosh USB 9 Choose your connection type For USB interface cable Windows®, go to page 10 Macintosh, go to page 14 For Wired Network Windows®, go to page 17 Macintosh, go to page 22 For Wireless Network Windows® and Macintosh, go to page 25 9 Wired Network Wireless
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 10
    system. • The supplied CD-ROM includes ScanSoft™ PaperPort™ 11SE. This software supports Windows® 2000 (SP4 or greater), XP (SP2 or greater), XP Professional x64 Edition and Windows Vista®. Update to the latest Windows® Service Pack before installing MFL-Pro Suite. 11 Install MFL-Pro Suite a Put
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 11
    appears, click Yes if you agree to the Software License Agreement. d The installation of ScanSoft™ PaperPort™ 11SE will automatically start and is followed by the installation of MFL-Pro Suite. e When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 12
    scanner cover support down b and close the scanner cover c. 1 2 3 LAN USB e The installation will continue automatically. The installation screens appear one on-screen instructions. Once you have completed the registration process, close your web browser to return to this window. Then click Next.
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 13
    rights. Windows® Note XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver when printing from applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 14
    For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/. • For Mac OS X 10.3.0 to 10.3.8 users, upgrade to use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position. c Carefully route
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 15
    cover to release the lock a. Gently push the scanner cover support down b and close the scanner cover c. 1 2 3 Macintosh e The Brother software will search for the Brother device. f Choose the machine from the list, and then click OK. 12 Install MFL-Pro Suite a Put the supplied CD-ROM into
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 16
    ! PageManager is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. a Double-click the Presto! PageManager icon and follow the on-screen instructions. Finish The installation is now complete. Macintosh
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 17
    Wired Network Windows® For wired network interface users (Windows® 2000 Professional/XP/ XP Professional x64 Edition/ Windows Vista®) 10 software supports Windows® 2000 (SP4 or greater), XP (SP2 or greater), XP Professional x64 Edition and Windows Vista®. Update to the latest Windows® Service
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 18
    with one on top of the other. IMPORTANT Make sure that the cable does not restrict the cover from closing, or an error may occur. d Lift the scanner cover to release the lock a. Gently push the scanner cover support down b and close the scanner cover c. 1 2 3 Note If the Brother screen does
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 19
    Software License Agreement. See the instructions provided with your firewall software for information on how to add the following network ports. „ For network scanning, add UDP port 54925. „ If you still have trouble with your network connection, add UDP port 137. Windows® Macintosh Wired Network
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 20
    Network Windows® Note • If there is more than one machine connected to the network, choose your machine from the list, and then click Next. This window will not appear if there is only one machine connected on the network, it will be chosen automatically. h The installation of the Brother drivers
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 21
    The XML Paper Specification Printer Driver is the most suitable driver when printing from applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center at http://solutions.brother.com/. Windows® Macintosh Wired Network 21
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 22
    For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/. • For Mac OS X 10.3.0 to 10.3.8 users, upgrade to of the machine to lift the scanner cover until it locks securely into the open position. b Connect the network cable to the LAN socket marked
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 23
    , and then click Next. Follow the on-screen instructions. d Please wait, it will take a few seconds for the software to install. After the installation, click Restart to finish installing the software. e The Brother software will search for the Brother device. Windows® Macintosh Wired Network 23
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 24
    -screen instructions. Enter a name for your Macintosh in Display Name up to 15 characters long and click OK. Go to g. The name you enter will appear on the machine's LCD when you press the Scan key and choose a scan option. (For more information, see Network Scanning in the Software User's Guide on
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 25
    without an access point) you can find instructions in the Network User's Guide on the CD-ROM. You can view the Network User's Guide by following the instructions below. 1 Turn on your computer. Insert the Brother CD-ROM into your CD-ROM drive. For Windows®: 2 Choose your model and the language. The
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 26
    (Infrastructure Mode) The following instructions will offer two methods for installing your Brother machine in a wireless network environment. Both methods are for infrastructure mode, using a wireless access point/router that uses DHCP to assign IP addresses. Choose a configuration method and
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 27
    choose 3.Network and press OK. Press a or b to choose 2.WLAN and press OK. Press a or b to choose 2.Setup Wizard and press OK. When Change to WLAN to not broadcast the SSID you will have to manually add the SSID name. For details, see the Network User's Guide on the CD-ROM. c Enter the Password you
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 28
    For Wireless Network Users Wireless setup is now complete. To install MFL-Pro Suite, continue to step 13. For Windows® Users: Now go to Page 31 For Macintosh Users: Now go to Page 35 28
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 29
    ™, Wi-Fi Protected Setup or AOSS™ button on your wireless access point/router. See the user's guide for your wireless access point/router for instructions. d On your machine, press Menu. Press a or b to choose 3.Network and press OK. Press a or b to choose 2.WLAN and press OK. Press a or b to choose
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 30
    For Wireless Network Users Wireless setup is now complete. To install MFL-Pro Suite, continue to step 13. For Windows® Users: Now go to Page 31 For Macintosh Users: Now go to Page 35 30
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 31
    Network Windows® Install the drivers & software (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows software supports Windows® 2000 (SP4 or greater), XP (SP2 or greater), XP Professional x64 Edition and Windows Vista®. Update to the latest Windows® Service If the Brother screen does
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 32
    ® Firewall or Windows® Firewall is off, this screen may appear. See the instructions provided with your firewall software for information on how to add the following network ports. „ For network scanning, add UDP port 54925. „ If you still have trouble with your network connection, add UDP port 137
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 33
    the registration process, close your web browser to return to this window. Then click Next. Click OK and then click Configure IP Address. Enter an IP address for your machine that is suitable for your network by following the on-screen instructions. Windows® Macintosh Wireless Network 33
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 34
    page 37. Note XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver when printing from applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center at http://solutions
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 35
    Restart to finish installing the software. f The Brother software will search for the Brother device. g If the machine is configured for your network, choose the machine from the list, and then click OK. b Double-click the Start Here OSX icon to install. Windows® Macintosh Wireless Network 35
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 36
    PageManager is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and instructions. The name you enter will appear on the machine's LCD when you press the Scan key and choose a scan option. (For more information, see Network Scanning in the Software User's Guide
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 37
    Windows® 1 Install FaceFilter Studio supported by Reallusion, Inc FaceFilter Studio is an easy-to-use borderless photo printing application. FaceFilter Studio also lets you edit your photo data and add Studio Help To get instructions on how to use FaceFilter Studio, download and install FaceFilter
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 38
    supported by Reallusion, Inc You can install BookScan&Whiteboard Suite. The BookScan Enhancer software can correct your scanned book images automatically. The Whiteboard Enhancer software cleans click Additional Applications. Windows® c Click the BookScan&Whiteboard Suite button to install. 38
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 39
    For Network Users BRAdmin Light utility (for Windows® users) BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother products on your network, view the status and configure basic network settings, such as IP address. For more information on
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 40
    It also can search for Brother products on your network, view the status and configure basic network settings, such as IP address from a computer running Mac OS X 10.3.9 or greater. The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 41
    For Wireless Network Users Restore the network settings to factory default To restore all network settings of the internal Print/Scan server to Note Making corrections If you entered an incorrect letter and want to change it, press Enlarge/Reduce key or Number of Copies key to position the cursor
  • Brother International MFC 295CN | Quick Setup Guide - Spanish - Page 42
    about the ink cartridges for your machine, visit http://www.brother.com/original/ or contact your local Brother re-seller. Ink cartridge Black LC61BK Yellow or other countries. Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

1
Start Here
DCP-375CW
Quick Setup Guide
USA/CAN Version 0
Before you can use the machine, please read this Quick Setup Guide for the correct setup and installation.
1
Unpack the machine and check the components
WARNING
Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep
these bags away from babies and children.
a
Remove the protective tape and film covering the machine.
b
Remove the plastic bag
a
containing the ink cartridges from on top of the paper tray.
c
Make sure you have all components.
WARNING
Warnings tell you what to do to prevent possible personal injury.
CAUTION
Cautions specify procedures you must follow or avoid to prevent possible minor injuries.
IMPORTANT
DO NOT connect the USB cable yet (if you are using a USB
cable).
Starter Ink
Cartridges
[x4]
Black
Yellow
Cyan
Magenta
Quick Setup Guide
User’s Guide
CD-ROM
Accessory Order
Form
Product Registration
Sheet (USA only)
Note
The components included in the box may differ depending on your country.
Save all packing materials and the box in case for any reason you must ship your machine.
You need to purchase the correct interface cable for the interface you want to use (for USB or network
connection).
USB cable
Please make sure you use a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long (cable not
included).
Your machine has a USB interface that is compatible with the USB 2.0 specification. This interface is also
compatible with Hi-Speed USB 2.0; however, the maximum data transfer rate will be 12 Mbits/s. The machine
can also be connected to a computer that has a USB 1.1 interface.
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet
Network.
1