Brother International MFC-J430w Quick Setup Guide - English
Brother International MFC-J430w Manual
 |
View all Brother International MFC-J430w manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International MFC-J430w manual content summary:
- Brother International MFC-J430w | Quick Setup Guide - English - Page 1
the machine and check the components Most of the illustrations in this Quick Setup Guide show the MFC-J430W. The components included in the box may differ depending on your country. Starter Ink Cartridges Black Yellow Cyan Magenta Quick Setup Guide CD-ROM Basic User's Guide Product Safety - Brother International MFC-J430w | Quick Setup Guide - English - Page 2
the machine, and also from the LCD. b Remove the plastic bag a containing the ink cartridges from on top of the paper tray. 1 c With both hands, gently press and slide the paper side guides a and then the paper length guide b to fit the paper size. Make sure that the triangular marks c on the - Brother International MFC-J430w | Quick Setup Guide - English - Page 3
the paper tray print side down and top edge first. Check that the paper is flat in the tray. IMPORTANT Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause paper feed problems. f Gently adjust the paper side guides to the - Brother International MFC-J430w | Quick Setup Guide - English - Page 4
to the jack on the machine marked LINE. 1 Set the receive mode to External TAD if you have an external answering machine. See Choose the correct Receive Mode on page 8. For additional details, see Connecting an external TAD (telephone answering device) in chapter 6 of the Basic User's Guide. 4 - Brother International MFC-J430w | Quick Setup Guide - English - Page 5
IMPORTANT DO NOT shake the ink cartridges. If ink stains your skin or clothing, wash with soap or detergent at once. e Take care to match the color of the lever a with the cartridge color b, as shown in the diagram below. Install each ink cartridge in the direction of the arrow on the label. 1 2 5 - Brother International MFC-J430w | Quick Setup Guide - English - Page 6
• If you mix the colors by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation. (See Cleaning the print head in Appendix A of the Basic User's Guide.) • Once you open an ink cartridge, install it in the machine and use it - Brother International MFC-J430w | Quick Setup Guide - English - Page 7
of the four color blocks on the sheet. (black/yellow/cyan/magenta) c If all lines are clear and visible, press 1 (Yes) to finish the quality check and go to step 6. OK 6 Choose your language (if needed) a Press Menu. b Press a or b to choose Initial Setup. Press OK. c Press a or b to choose Local - Brother International MFC-J430w | Quick Setup Guide - English - Page 8
TAD and fax messages are printed. Choose External TAD as your receive mode. See the instructions below. For additional details, see Connecting an external TAD (telephone answering device) in chapter 6 of the Basic User's Guide. Will you be using your Brother machine on a dedicated fax line? Your - Brother International MFC-J430w | Quick Setup Guide - English - Page 9
, try changing the contrast setting. a Press Menu. b Press a or b to choose General Setup. Press OK. c Press a or b to choose LCD Settings. Press OK. d Press a the station ID, it will add it to each fax you send. a Press Menu. b Press a or b to choose Initial Setup. Press OK. c Press a or b to choose - Brother International MFC-J430w | Quick Setup Guide - English - Page 10
fax number to be printed on all fax pages that you send. For details, see Entering Text in Appendix C of the Basic User's Guide. a Press Menu. b Press a or b to choose Initial Setup the cursor to the incorrect character, and then press Clear. Press key 2 3 4 5 6 7 8 9 One time A D G J M P T W Two - Brother International MFC-J430w | Quick Setup Guide - English - Page 11
pages transmitted, and whether or not the transmission was successful. If you want to use the Fax Transmission Report feature, see Transmission Verification Report in chapter 4 of the Basic User's Guide. 12 Set Tone or Pulse dialing mode (Canada only) Your machine comes set for Tone dialing service - Brother International MFC-J430w | Quick Setup Guide - English - Page 12
the CD-ROM or visit http://www.brother.com/registration/. a Fill out the Product Registration Sheet. c Make sure (FAX) is illuminated in Blue. d Enter the toll-free fax number: 1-877-268-9575. e Press Black Start. Note You will receive a confirmation fax of your Product Registration. b Put the - Brother International MFC-J430w | Quick Setup Guide - English - Page 13
Choose your connection type These installation instructions are for Windows® XP/XP Professional x64 Edition, Windows Vista®, Windows® 7, and Mac OS X (versions 10.4.11, 10.5.x and 10.6.x). Note • For Windows Server® 2003/2008/2008 R2, the drivers can be found from your model's download page at http - Brother International MFC-J430w | Quick Setup Guide - English - Page 14
. Follow the on-screen instructions. IMPORTANT • DO NOT connect the USB cable yet. • If there are any programs running, close them. Note • The screens may differ depending on your operating system. • The CD-ROM includes ScanSoft™ PaperPort™12SE. This software supports Windows® XP Home (SP3 or - Brother International MFC-J430w | Quick Setup Guide - English - Page 15
the cover from closing, or an error may occur. d Using both hands, grasp the plastic tabs on both sides of the machine and gently close the scanner cover. USB Windows® Macintosh USB e The installation will continue automatically. The installation screens appear one after another. IMPORTANT DO NOT - Brother International MFC-J430w | Quick Setup Guide - English - Page 16
on page 34. Note XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver for Windows Vista® and Windows® 7 when printing from applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother - Brother International MFC-J430w | Quick Setup Guide - English - Page 17
scanner cover until it locks securely into the open position. c Carefully guide the USB cable into the cable channel and out the back of the machine. Connect the cable to your Macintosh. IMPORTANT Make sure that the cable does not restrict the cover from closing, or an error may occur. Windows - Brother International MFC-J430w | Quick Setup Guide - English - Page 18
search for the Brother device. This will take a few moments to complete. 18 Finish The installation is now complete. Note To use Image Capture for scanning on Mac OS X 10.6.x, please install the CUPS Printer Driver, which can be downloaded from your model page on the Brother Solutions Center at - Brother International MFC-J430w | Quick Setup Guide - English - Page 19
Note To set up your machine in Ad-hoc mode (connected to a wireless capable computer without an access point/router) you can find instructions in the Network User's Guide on the CD-ROM. You can view the Network User's Guide by following the instructions below. 1 Turn on your computer. Insert the CD - Brother International MFC-J430w | Quick Setup Guide - English - Page 20
18 Choose your wireless install method The following instructions will offer three methods for installing your Brother machine in a wireless network environment. Choose the method you prefer for your environment. a Configuration using the CD-ROM installer and a USB cable (Windows® only) • You need - Brother International MFC-J430w | Quick Setup Guide - English - Page 21
control panel (Windows® and Macintosh) If your wireless access point/router does not support WPS (Wi-Fi Protected Setup) or AOSS™, write down the wireless network settings of your wireless access point/router in the area below. Please do not contact Brother Customer Service for assistance without - Brother International MFC-J430w | Quick Setup Guide - English - Page 22
instructions. c Choose Wireless Network Connection, and then click Next. d When this screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next. If you are using a firewall other than the Windows® Firewall - Brother International MFC-J430w | Quick Setup Guide - English - Page 23
in step 18-a on page 20, and then click Next. g Temporarily connect the USB cable (not included) directly to the computer and the machine. If the confirmation screen appears, check the box and click Next, go to h. Otherwise, go to i. Note • If the list is blank, check that the access point has - Brother International MFC-J430w | Quick Setup Guide - English - Page 24
to continue to install MFL-Pro Suite. Wireless setup is now complete. A four wireless signal strength of your access point/router. To install MFL-Pro Suite, continue to step 21-e on page 30. Now go to Page 30 Note • The settings will remain unchanged if you click Cancel. • If you want to manually - Brother International MFC-J430w | Quick Setup Guide - English - Page 25
be printed. If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 27. Wireless setup is now complete. A four level indicator at the upper right of your machine's LCD will show the wireless signal strength of your access point/router. To install MFL - Brother International MFC-J430w | Quick Setup Guide - English - Page 26
access point/router for instructions. e A connection result message appears for 60 seconds on the LCD and a wireless LAN report will automatically be printed. If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 27. Wireless setup is now complete - Brother International MFC-J430w | Quick Setup Guide - English - Page 27
may also be described as the Password, Security Key or Encryption Key. Wireless LAN report If the wireless LAN report that printed shows that the connection failed, check the error code on the printed report and refer to the following instructions. Error code TS-01 TS-02 Recommended Solutions The - Brother International MFC-J430w | Quick Setup Guide - English - Page 28
, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. See How can I find the wireless security information (SSID and Network Key) on page 27 to confirm. The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled. If - Brother International MFC-J430w | Quick Setup Guide - English - Page 29
Wireless Network Windows® Install the drivers & software (Windows® XP Home/XP Professional/Windows Vista®/Windows® 7) 20 Before you install Make sure that your computer is ON and you are logged on with Administrator rights. b The CD-ROM Top Menu will appear. Click Install MFL-Pro Suite and click - Brother International MFC-J430w | Quick Setup Guide - English - Page 30
Wireless Network Windows® d When this screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next. f The installation of the Brother drivers will automatically start. The installation screens appear one - Brother International MFC-J430w | Quick Setup Guide - English - Page 31
contact Brother customer service. Finish The installation is now complete. Now go to Proceed to Install Optional Applications on page 34. Note XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver for Windows Vista® and Windows® 7 when printing - Brother International MFC-J430w | Quick Setup Guide - English - Page 32
Device Setup Wizard screen appears. Follow the on-screen instructions to complete the wireless configuration. e Please wait for the software to install. After the installation, this window will appear. Choose your machine from the list, and then click OK. c Choose Wireless Network Connection, and - Brother International MFC-J430w | Quick Setup Guide - English - Page 33
on page 32. Finish The installation is now complete. Note To use Image Capture for scanning on Mac OS X 10.6.x, please install the CUPS Printer Driver, which can be downloaded from your model page on the Brother Solutions Center at http://solutions.brother.com/. Windows® Macintosh Wireless Network - Brother International MFC-J430w | Quick Setup Guide - English - Page 34
update web page. c Click the Download button and choose a folder to save the file in. d Close FaceFilter Studio before you start the installer for FaceFilter Studio Help. Double-click the downloaded file from the folder you specified and follow the on-screen instructions for installation. Note To - Brother International MFC-J430w | Quick Setup Guide - English - Page 35
Print/Scan printed on them. The keys for 0, # and l do not have printed letters because they are used for special characters. By pressing the correct number key repeatedly, you can access the character you want. For configuring wireless network settings Press Key One , press Clear. Re-enter - Brother International MFC-J430w | Quick Setup Guide - English - Page 36
When the time comes to replace ink cartridges, an error message will be indicated on the LCD. For more information about the ink cartridges for your machine, visit http://www.brother.com/original/ or contact your local Brother re-seller. Ink cartridge Black LC71BK (Standard) LC75BK (High Yield
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
1
Start Here
Quick Setup Guide
USA/CAN Version 0
MFC-J425W
MFC-J430W
MFC-J435W
Thank you for choosing Brother, your support is important to us and we value your business. Your Brother product
is engineered and manufactured to the highest standards to deliver reliable performance, day-in and day-out.
Please read the Product Safety Guide first before you set up your machine. Then, please read this Quick Setup
Guide for the correct setup and installation.
1
Unpack the machine and check the components
Most of the illustrations in this Quick Setup Guide show the MFC-J430W
.
The components included in the box may differ depending on your country
.
WARNING
Plastic bags are used in the packing of your machine. Plastic bags are not toys. To avoid the danger
of suffocation, keep these bags away from babies and children and dispose of them correctly.
WARNING
WARNING
indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injuries.
CAUTION
CAUTION
indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injuries.
Starter Ink
Cartridges
Black
Yellow
Cyan
Magenta
Quick Setup Guide
CD-ROM
Basic User’s Guide
Product Safety
Guide
Product Registration Sheet (USA only)
Telephone Line Cord
Note
•
Save all packing materials and the box in case for any reason you must ship your machine.
•
You need to purchase the correct USB cable.
USB cable
It is recommended to use a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long (cable not
included).