Brother International MFC-J435W Quick Setup Guide - English
Brother International MFC-J435W Manual
 |
View all Brother International MFC-J435W manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International MFC-J435W manual content summary:
- Brother International MFC-J435W | Quick Setup Guide - English - Page 1
of the illustrations in this Quick Setup Guide show the MFC-J430W. The components included in the box may differ depending on your country. Starter Ink Cartridges Black Yellow Cyan Magenta Quick Setup Guide CD-ROM Basic User's Guide Product Safety Guide Product Registration Sheet (USA only - Brother International MFC-J435W | Quick Setup Guide - English - Page 2
bag a containing the ink cartridges from on top of the paper tray. 1 c With both hands, gently press and slide the paper side guides a and then the paper length guide b to fit the paper size. Make sure that the triangular marks c on the paper side guides a and paper length guide b line up with - Brother International MFC-J435W | Quick Setup Guide - English - Page 3
put the paper into the paper tray print side down and top edge first. Check that the paper is flat in the tray. IMPORTANT Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause paper feed problems. f Gently adjust the paper side guides to the paper with - Brother International MFC-J435W | Quick Setup Guide - English - Page 4
to the jack on the machine marked LINE. 1 Set the receive mode to External TAD if you have an external answering machine. See Choose the correct Receive Mode on page 8. For additional details, see Connecting an external TAD (telephone answering device) in chapter 6 of the Basic User's Guide. 4 - Brother International MFC-J435W | Quick Setup Guide - English - Page 5
doctor if you are concerned. Note Make sure you install the Starter Ink Cartridges included with your machine first. a Make sure that the power is turned on. The LCD will show No Ink Cartridge. b Open the ink cartridge cover a. d Unpack the ink cartridge. Turn the green release lever on the orange - Brother International MFC-J435W | Quick Setup Guide - English - Page 6
• If you mix the colors by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation. (See Cleaning the print head in Appendix A of the Basic User's Guide.) • Once you open an ink cartridge, install it in the machine and use it - Brother International MFC-J435W | Quick Setup Guide - English - Page 7
5 Check the print quality a When the preparation process has finished, the LCD shows Set Paper and Press Start. Press Color Start. b Check the quality of the four color blocks on the sheet. (black/yellow/cyan/magenta) c If all lines are clear and visible, press 1 (Yes) to finish the quality check - Brother International MFC-J435W | Quick Setup Guide - English - Page 8
TAD and fax messages are printed. Choose External TAD as your receive mode. See the instructions below. For additional details, see Connecting an external TAD (telephone answering device) in chapter 6 of the Basic User's Guide. Will you be using your Brother machine on a dedicated fax line? Your - Brother International MFC-J435W | Quick Setup Guide - English - Page 9
If you are having difficulty reading the LCD, try changing the contrast setting. a Press Menu. b Press a or b to choose General Setup. Press OK. c Press a or b to choose station ID, it will add it to each fax you send. a Press Menu. b Press a or b to choose Initial Setup. Press OK. c Press a or b to - Brother International MFC-J435W | Quick Setup Guide - English - Page 10
10 Set your Station ID You should store your name and fax number to be printed on all fax pages that you send. For details, see Entering Text in Appendix C of the Basic User's Guide. a Press Menu. b Press a or b to choose Initial Setup. Press OK. c Press a or b to choose Station ID. Press OK. d - Brother International MFC-J435W | Quick Setup Guide - English - Page 11
in chapter 4 of the Basic User's Guide. 12 Set Tone or Pulse dialing mode (Canada only) Your machine comes set for Tone dialing service. If you have Pulse dialing service (rotary), you need to change the dialing mode. a Press Menu. b Press a or b to choose Initial Setup. Press OK. c Press a or b to - Brother International MFC-J435W | Quick Setup Guide - English - Page 12
the CD-ROM or visit http://www.brother.com/registration/. a Fill out the Product Registration Sheet. c Make sure (FAX) is illuminated in Blue. d Enter the toll-free fax number: 1-877-268-9575. e Press Black Start. Note You will receive a confirmation fax of your Product Registration. b Put the - Brother International MFC-J435W | Quick Setup Guide - English - Page 13
16 Choose your connection type These installation instructions are for Windows® XP/XP Professional x64 Edition, Windows Vista®, Windows® 7, and Mac OS X (versions 10.4.11, 10.5.x and 10.6.x). Note • For Windows Server® 2003/2008/2008 R2, the drivers can be found from your model's download page at - Brother International MFC-J435W | Quick Setup Guide - English - Page 14
™12SE. This software supports Windows® XP Home (SP3 or greater), XP Professional (SP3 or greater), XP Professional x64 Edition (SP2 or greater), Windows Vista® (SP2 or greater) and Windows® 7. Update to the latest Windows® Service Pack before installing MFL-Pro Suite. 18 Install MFL-Pro Suite - Brother International MFC-J435W | Quick Setup Guide - English - Page 15
of the machine and gently close the scanner cover. USB Windows® Macintosh USB e The installation will continue automatically. The installation screens appear one after another. IMPORTANT DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear - Brother International MFC-J435W | Quick Setup Guide - English - Page 16
XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver for Windows Vista® and Windows® 7 when printing from applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center - Brother International MFC-J435W | Quick Setup Guide - English - Page 17
USB Macintosh For USB interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x) 17 Before you install b Connect the USB cable to the USB port marked with a symbol. You will find the USB port inside the machine as shown below. Make sure your machine is connected to the power and your Macintosh is ON. - Brother International MFC-J435W | Quick Setup Guide - English - Page 18
install. After the installation, the Brother software will search for the Brother device. This will take a few moments to complete. 18 Finish The installation is now complete. Note To use Image Capture for scanning on Mac OS X 10.6.x, please install the CUPS Printer Driver, which can be downloaded - Brother International MFC-J435W | Quick Setup Guide - English - Page 19
machine from these computers, you will need to install the drivers and software. The following steps will guide you through the configuration and installation process. To achieve optimum results with normal everyday document printing, place the Brother machine as close to the network access point - Brother International MFC-J435W | Quick Setup Guide - English - Page 20
18 Choose your wireless install method The following instructions will offer three methods for installing your Brother machine in a wireless network environment. Choose the method you prefer for your environment. a Configuration using the CD-ROM installer and a USB cable (Windows® only) • You need - Brother International MFC-J435W | Quick Setup Guide - English - Page 21
from the control panel (Windows® and Macintosh) If your wireless access point/router does not support WPS (Wi-Fi Protected Setup) or AOSS™, write down the wireless network settings of your wireless access point/router in the area below. Please do not contact Brother Customer Service for assistance - Brother International MFC-J435W | Quick Setup Guide - English - Page 22
firewall software for information on how to add the following network ports. For network scanning, add UDP port 54925. For network PC-Fax receiving, add UDP port 54926. If you still have trouble with your network connection, add UDP port 137 and 161. e Choose Use your computer or the control - Brother International MFC-J435W | Quick Setup Guide - English - Page 23
network in step 18-a on page 20, and then click Next. g Temporarily connect the USB cable (not included) directly to the computer and the machine. If not broadcast the SSID you can manually add it by clicking the Advanced button. Follow the on-screen instructions for entering the Name (SSID), and - Brother International MFC-J435W | Quick Setup Guide - English - Page 24
to your machine. m Click Next to continue to install MFL-Pro Suite. Wireless setup is now complete. A four level indicator at the manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network. • If the wireless setup - Brother International MFC-J435W | Quick Setup Guide - English - Page 25
. If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 27. Wireless setup is now complete. A four level indicator at the upper right of your machine's LCD will show the wireless signal strength of your access point/router. To install MFL-Pro Suite - Brother International MFC-J435W | Quick Setup Guide - English - Page 26
access point/router for instructions. e A connection result message appears for 60 seconds on the LCD and a wireless LAN report will automatically be printed. If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 27. Wireless setup is now complete - Brother International MFC-J435W | Quick Setup Guide - English - Page 27
within about 3.3 feet (one meter) from the wireless access point when you are configuring the wireless settings. - If your wireless access point/router is using MAC address filtering, confirm the MAC address of the Brother machine is allowed in the filter. 2. If you manually entered the SSID and - Brother International MFC-J435W | Quick Setup Guide - English - Page 28
mode, change the authentication and encryption methods of your computer for the wireless setting. Your machine supports used as the first WEP key. Your Brother machine supports the use of the first WEP key enabled are detected. - Confirm that only one wireless access point/router within range has the - Brother International MFC-J435W | Quick Setup Guide - English - Page 29
™12SE. This software supports Windows® XP Home (SP3 or greater), XP Professional (SP3 or greater), XP Professional x64 Edition (SP2 or greater), Windows Vista® (SP2 or greater) and Windows® 7. Update to the latest Windows® Service Pack before installing MFL-Pro Suite. 21 Install MFL-Pro Suite - Brother International MFC-J435W | Quick Setup Guide - English - Page 30
Network Windows® d When this screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next. f The installation of the Brother drivers will automatically start. The installation screens appear one after - Brother International MFC-J435W | Quick Setup Guide - English - Page 31
contact Brother customer service. Finish The installation is now complete. Now go to Proceed to Install Optional Applications on page 34. Note XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver for Windows Vista® and Windows® 7 when printing - Brother International MFC-J435W | Quick Setup Guide - English - Page 32
Device Setup Wizard screen appears. Follow the on-screen instructions to complete the wireless configuration. e Please wait for the software to install. After the installation, this window will appear. Choose your machine from the list, and then click OK. c Choose Wireless Network Connection, and - Brother International MFC-J435W | Quick Setup Guide - English - Page 33
page 32. Finish The installation is now complete. Note To use Image Capture for scanning on Mac OS X 10.6.x, please install the CUPS Printer Driver, which can be downloaded from your model page on the Brother Solutions Center at http://solutions.brother.com/. Windows® Macintosh Wireless Network 33 - Brother International MFC-J435W | Quick Setup Guide - English - Page 34
Optional Applications Windows® 1 Install optional applications FaceFilter Studio/BookScan & Whiteboard Suite supported by Reallusion, Inc FaceFilter Studio is an easy-to-use borderless photo printing application. The BookScan Enhancer software can correct your scanned book images automatically - Brother International MFC-J435W | Quick Setup Guide - English - Page 35
three or four letters printed on them. The keys for 0, # and l do not have printed letters because they are used for special characters. By pressing the correct number key repeatedly, you can access the character you want. For configuring wireless network settings Press Key One time Two times - Brother International MFC-J435W | Quick Setup Guide - English - Page 36
IP" software developed by ZUKEN ELMIC,Inc. Get inspired. If you're using Windows®, double-click the Brother CreativeCenter icon on your desktop to access our FREE web site with many ideas and resources for personal and professional use. Mac users can access Brother CreativeCenter at this web address
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
1
Start Here
Quick Setup Guide
USA/CAN Version 0
MFC-J425W
MFC-J430W
MFC-J435W
Thank you for choosing Brother, your support is important to us and we value your business. Your Brother product
is engineered and manufactured to the highest standards to deliver reliable performance, day-in and day-out.
Please read the Product Safety Guide first before you set up your machine. Then, please read this Quick Setup
Guide for the correct setup and installation.
1
Unpack the machine and check the components
Most of the illustrations in this Quick Setup Guide show the MFC-J430W
.
The components included in the box may differ depending on your country
.
WARNING
Plastic bags are used in the packing of your machine. Plastic bags are not toys. To avoid the danger
of suffocation, keep these bags away from babies and children and dispose of them correctly.
WARNING
WARNING
indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injuries.
CAUTION
CAUTION
indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injuries.
Starter Ink
Cartridges
Black
Yellow
Cyan
Magenta
Quick Setup Guide
CD-ROM
Basic User’s Guide
Product Safety
Guide
Product Registration Sheet (USA only)
Telephone Line Cord
Note
•
Save all packing materials and the box in case for any reason you must ship your machine.
•
You need to purchase the correct USB cable.
USB cable
It is recommended to use a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long (cable not
included).