Brother International MFC-J4510DW Network Users Manual - English
Brother International MFC-J4510DW Manual
 |
View all Brother International MFC-J4510DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International MFC-J4510DW manual content summary:
- Brother International MFC-J4510DW | Network Users Manual - English - Page 1
MFC models) using your Brother machine. You can also find supported protocol information and detailed troubleshooting tips. To find basic information about network and advanced network features of your Brother machine, see the Network Glossary. To download the latest manual, please visit the Brother - Brother International MFC-J4510DW | Network Users Manual - English - Page 2
and Windows Server® 2008 R2. Windows Vista® in this document represents all editions of Windows Vista®. Windows® 7 in this document represents all editions of Windows® 7. Please go to the Brother Solutions Center at http://solutions.brother.com/ and click Manuals on your model page to download - Brother International MFC-J4510DW | Network Users Manual - English - Page 3
Not all models are available in all countries. In this manual, the LCD messages of the MFC-J2510 or MFC-J4510DW are used if not specified. ii - Brother International MFC-J4510DW | Network Users Manual - English - Page 4
(Windows One-push configuration using WPS (Wi-Fi Protected Setup) or AOSS 14 Configuration using the PIN Method of WPS (Wi-Fi Protected Setup 15 Configuration using the machine's control panel Setup Wizard 18 Manual MAC Address ...27 E-mail / IFAX (For MFC models) (Available when IFAX is downloaded - Brother International MFC-J4510DW | Network Users Manual - English - Page 5
Management (web browser 63 Sending an E-mail with user authentication 63 Secure Management using BRAdmin Professional 3 (Windows 65 To use the BRAdmin Professional 3 utility securely, you need to follow the points below 65 9 Troubleshooting 66 Overview...66 Identifying your problem ...66 iv - Brother International MFC-J4510DW | Network Users Manual - English - Page 6
84 Uninstalling drivers used for printing and scanning via Web Services (Windows Vista® and Windows® 7) ...85 Network printing and scanning installation for Infrastructure mode when using Vertical Pairing (Windows® 7)...86 Section III Appendixes A Appendix A 88 Supported protocols and security - Brother International MFC-J4510DW | Network Users Manual - English - Page 7
2 Changing your machine's network settings 5 Configuring your machine for a wireless network 9 Control panel setup 24 Web Based Management 38 LDAP operation (For MFC-J2510/J4510DW) 49 Internet fax (For MFC models) (Available as a download) 51 Security features 62 Troubleshooting 66 - Brother International MFC-J4510DW | Network Users Manual - English - Page 8
connections are supported by each operating system. NOTE • Although the Brother machine can be used in both a wired and wireless network, only one connection method refer to the Wi-Fi Direct Guide located on the Manuals download page for your model on the Brother Solutions Center (http://solutions - Brother International MFC-J4510DW | Network Users Manual - English - Page 9
See Software User's Guide. Driver Deployment Wizard Vertical Pairing See page 86. Windows® XP Windows Vista® Windows® 7 r r r r r r r r r r r r4 Windows Server® 2003/2008 r r r r r 1 Black and White only. Not available for DCP models. 2 BRAdmin Professional 3 is available as a download from - Brother International MFC-J4510DW | Network Users Manual - English - Page 10
Lock 2.0 on page 41.) Brother Web Connect 1 Brother Web Connect allows you to download and print images and also to upload files by accessing services on the internet directly from your machine. For details, please refer to the Web Connect Guide located on the Manuals download page for your model - Brother International MFC-J4510DW | Network Users Manual - English - Page 11
Control panel setup on page 24.) Using the Brother network connected devices. It can also search for Brother products in a TCP/IP environment, view the status and configure basic network settings, such as the IP address. Installing BRAdmin Light 2 Windows instructions. NOTE If the Brother screen - Brother International MFC-J4510DW | Network Users Manual - English - Page 12
Light utility version from http://solutions.brother.com/. • If you require more advanced printer management, use the latest BRAdmin Professional 3 utility that is 2 available as a download from http://solutions.brother.com/. This utility is only available for Windows® users. • If you are using - Brother International MFC-J4510DW | Network Users Manual - English - Page 13
machine. (See Control panel setup on page 24.) d Choose STATIC for the Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) 2 of your print server. Windows® Macintosh e Click OK. f With the correctly programmed IP address, you will see the Brother print server in the device list - Brother International MFC-J4510DW | Network Users Manual - English - Page 14
and device settings along with the ability to update device firmware from a Windows® computer on your LAN. BRAdmin Professional 3 can also log activity of Brother devices on your network and export the log data in an HTML, CSV, TXT or SQL format. To download, and for more information, visit us at - Brother International MFC-J4510DW | Network Users Manual - English - Page 15
throughput speed. • Although the Brother machine can be used in both a wired and wireless network, only one connection method can be used the Wi-Fi Direct Guide located on the Manuals download page for your model on the Brother Solutions Center (http://solutions.brother.com/). • Before configuring - Brother International MFC-J4510DW | Network Users Manual - English - Page 16
for installing your Brother machine in a wireless network environment. Choose the method you prefer for your environment. Wireless configuration temporarily using a USB cable (Recommended) See Wireless configuration temporarily using a USB cable on page 12. One push wireless configuration - Brother International MFC-J4510DW | Network Users Manual - English - Page 17
Configuring your machine for a wireless network 1 2 3 1 Wireless network machine (your machine) 2 Wireless capable computer We do not guarantee the wireless network connection with Windows Server® products in Ad-hoc mode. To set up your machine in Ad-hoc mode, see Configuration in Ad-hoc Mode on - Brother International MFC-J4510DW | Network Users Manual - English - Page 18
settings. Item SSID (Network Name): Network Key Record the current wireless network settings a Turn on your computer. b Start the Brother installer application. Windows® 1 Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically. If the language screen - Brother International MFC-J4510DW | Network Users Manual - English - Page 19
the supplied CD-ROM into your CD-ROM drive. Double-click the BROTHER icon on your desktop. 2 Double-click Utilities. 3 Double-click instructions for entering the Name (SSID). (Windows®) You have completed the wireless network setup. If you would like to continue installing drivers and software - Brother International MFC-J4510DW | Network Users Manual - English - Page 20
LAN settings, see Restoring the network settings to factory default on page 31. • Your Brother machine supports the use of the first WEP key only. One-push configuration using WPS (Wi-Fi Protected Setup) or AOSS™ 3 (For MFC-J2510/J4510DW) 3 a Press . b Press Wi-Fi. c Press WPS/AOSS. d When Switch - Brother International MFC-J4510DW | Network Users Manual - English - Page 21
on your wireless access point/router. See the User's Guide for your wireless access point/router for instructions. Then press OK and your machine will now Guide: Troubleshooting 3 (Windows®) You have completed the wireless network setup. If you would like to continue installing drivers and software - Brother International MFC-J4510DW | Network Users Manual - English - Page 22
points that support WPS (Wi-Fi Protected Setup) have a symbol as shown below. (For MFC-J2510/J4510DW) 3 a instructions. 1 The Registrar is normally the WLAN access point/router. NOTE The setting page may be different, depending on the brand of WLAN access point/router. See the instruction manual - Brother International MFC-J4510DW | Network Users Manual - English - Page 23
See the instruction manual that came with your WLAN access point/router. 3 1 (Windows Vista®) Click , Network, and then Add a wireless device. (Windows® 7) Guide: Troubleshooting (Windows®) You have completed the wireless network setup. If you would like to continue installing drivers and software - Brother International MFC-J4510DW | Network Users Manual - English - Page 24
function, you can easily connect your Brother machine to your wireless network. IMPORTANT default on page 31. Manual configuration from the control panel 3 (For MFC-J2510/J4510DW) 3 OK. If the wireless access point/router of the selected SSID supports WPS and the machine asks to use WPS, go to step - Brother International MFC-J4510DW | Network Users Manual - English - Page 25
failed, check the error code on the printed report. See Quick Setup Guide: Troubleshooting (Windows®) You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite from the - Brother International MFC-J4510DW | Network Users Manual - English - Page 26
machine when the SSID is not broadcast 3 (For MFC-J2510/J4510DW) 3 a Before configuring your machine we recommend you write point/router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. b Press . c Press All Settings. - Brother International MFC-J4510DW | Network Users Manual - English - Page 27
, see the Quick Setup Guide.) Press OK. j Press Infrastructure when instructed. k Choose the Authentication method. 3 Do one of the following: If you Guide: Troubleshooting (Windows®) You have completed the wireless network setup. If you would like to continue installing drivers and software - Brother International MFC-J4510DW | Network Users Manual - English - Page 28
in Ad-hoc Mode 3 Configure the wireless settings 3 (For MFC-J2510/J4510DW) 3 3 a Before configuring your machine we recommend you write must be set to Ad-hoc mode with an SSID already configured. For instructions on how to configure your computer to Ad-hoc mode please see the information - Brother International MFC-J4510DW | Network Users Manual - English - Page 29
failed, check the error code on the printed report. See Quick Setup Guide: Troubleshooting (Windows®) You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite from the - Brother International MFC-J4510DW | Network Users Manual - English - Page 30
page 8.) 1 For Macintosh users, you can download Brother's latest BRAdmin Light utility from http://solutions.brother the machine will scan the network for a DHCP server. If it can find one, and if the to scan the network for a server. Static 4 In this mode the machine's IP address must be manually - Brother International MFC-J4510DW | Network Users Manual - English - Page 31
is your machine's MAC Address / Ethernet Address) (up to 15 characters). NOTE DCP models cannot change the Node Name from the control panel settings. WINS Configuration 4 This selection controls how the machine obtains the IP address of the WINS (Windows® Internet Name Service) server. Auto - Brother International MFC-J4510DW | Network Users Manual - English - Page 32
Windows® Internet Name Service ://solutions.brother.com supports either Wi-Fi Protected Setup (PBC 1) or AOSS™, you can configure the machine easily without knowing your wireless network settings. (See the Quick Setup Guide or One push configuration using WPS (Wi-Fi Protected Setup™) or AOSS™ on page - Brother International MFC-J4510DW | Network Users Manual - English - Page 33
supports Wi-Fi Protected Setup (PIN Method), you can configure the machine easily without a computer. (See Configuration using the PIN Method of WPS (Wi-Fi Protected Setup) on page your machine's MAC address from the control panel. E-mail / IFAX (For MFC models) (Available when IFAX is downloaded) 4 - Brother International MFC-J4510DW | Network Users Manual - English - Page 34
(For entering text, see the Quick Setup Guide.) Mail Address 4 You can set your notification, see Sending an E-mail securely on page 63.) POP3 Server 4 This field displays the POP3 port number (for incoming E-mails) used by the Brother machine. Mailbox Name 4 You can specify a mailbox name - Brother International MFC-J4510DW | Network Users Manual - English - Page 35
feature only works on Internet Fax machines that support the "MDN" specification. Setup Mail TX attached to the Internet fax data being sent from the Brother machine to a computer (default is "Internet Fax Job"). , a 42 page document based on the ITU-T Test Chart #1 test chart is approximately - Brother International MFC-J4510DW | Network Users Manual - English - Page 36
been sent through the machine. NOTE • For more information on Relay Broadcast, see Relay broadcasting on page 57. • In order to use the Relay Report function, you must assign the relay domain in network connection, choose WLAN. You can only have one network connection type active at a time. 30 - Brother International MFC-J4510DW | Network Users Manual - English - Page 37
default settings using the BRAdmin applications or Web Based Management. (For more information, see Other Management Utilities on page 8.) 4 (For MFC-J2510/J4510DW) 4 a Press . b Press All Settings. c Press Network. d Press Network Reset. e Reset Network? will be displayed. Press Yes. f Reboot - Brother International MFC-J4510DW | Network Users Manual - English - Page 38
default Node Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network ("xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address). 4 (For MFC-J2510/J4510DW) 4 a Press . b Press All Settings. c Press Print Reports. d Press Network Configuration. e Press OK. 32 - Brother International MFC-J4510DW | Network Users Manual - English - Page 39
wireless status report. If the wireless connection failed, check the error code on the printed report. See Quick Setup Guide: Troubleshooting (For MFC-J2510/J4510DW) 4 a Press . 4 b Press All Settings. c Press Print Reports. d Press WLAN Report. e Press OK. NOTE If the WLAN Report does not - Brother International MFC-J4510DW | Network Users Manual - English - Page 40
000].[000].[000].[000] 1 Gateway [000-255].[000-255]. [000-255].[000-255] Node Name [000].[000].[000].[000] BRNXXXXXXXXXXXX= (your machine's MAC Address / Ethernet Address) (up to 15 characters) WINS Configuration Auto/Static WINS Server Primary/Secondary [000-255].[000-255]. [000-255].[000 - Brother International MFC-J4510DW | Network Users Manual - English - Page 41
255] [000].[000].[000].[000] Node Name BRWXXXXXXXXXXXX= (your machine's MAC Address / Ethernet Address) (up to 15 characters) WINS Configuration Auto/ 000].[000] On/Off On/Off Setup Wizard - (Choose SSID from list or manually add SSID) WPS/AOSS - WPS w/PIN - Code WLAN Status Status (Examples - Brother International MFC-J4510DW | Network Users Manual - English - Page 42
Control panel setup Level1 Level2 Level3 Network Wi-Fi Direct 3 Push Button - (Continued) PIN Code - Manual - Group Owner - Device Device Name Information SSID IP Address Status Status Information Signal I/F Enable - E-mail/IFAX 4 Mail Address 5 - Setup Server SMTP Server SMTP Port - Brother International MFC-J4510DW | Network Users Manual - English - Page 43
at the Brother Solutions Center (http://solutions.brother.com/). 3 For details, please see the Wi-Fi Direct Guide located on the Manuals download page for your model at the Brother Solutions Center (http://solutions.brother.com/). 4 Available after IFAX is downloaded. 5 For MFC-J2510/J4510DW 37 - Brother International MFC-J4510DW | Network Users Manual - English - Page 44
to FTP Configure Scan to Network Configure LDAP Software version information of the machine and print server Change network and machine configuration details NOTE We recommend Microsoft® Internet Explorer® 8.0/9.0 for Windows® and Safari 5.0 for Macintosh. Please also make sure that - Brother International MFC-J4510DW | Network Users Manual - English - Page 45
, see Printing the Network Configuration Report on page 32.) • For Macintosh users, you can have easy access to the Web Based Management System by clicking the machine icon on the Status Monitor screen. For more information, see the Software User's Guide. • If you have changed the protocol settings - Brother International MFC-J4510DW | Network Users Manual - English - Page 46
Web Based Management NOTE You can also set a password by clicking Please configure the password on the machine's web page if you are setting a login password. 5 40 - Brother International MFC-J4510DW | Network Users Manual - English - Page 47
Copy Color Print Page Limit Fax TX Fax RX Scan Page Counter Web Connect 1 If you register the PC user login names, you can restrict PC print without the user entering a password. For more detail, see Restricting PC print by PC user login name on page 42. How to configure the - Brother International MFC-J4510DW | Network Users Manual - English - Page 48
Based Management e Click Submit. NOTE If you want to restrict the PC printing by PC login user name, click PC Job Restriction by Login Name and configure the settings. (See Restricting PC print by PC user login name on page 42.) Scanning when using Secure Function Lock 2.0 5 The Secure Function Lock - Brother International MFC-J4510DW | Network Users Manual - English - Page 49
Web Based Management Export to CSV file You can export the current page counter including ID Number/Name information as a CSV file. Counter Auto Reset You can automatically reset the page counters by configuring the time interval based on Daily, Weekly or Monthly settings, during the period the - Brother International MFC-J4510DW | Network Users Manual - English - Page 50
Web Based Management Synchronize with SNTP server 5 SNTP is the protocol used to synchronize the time used by the machine for Authentication with the SNTP time server (this time is not the time displayed on the LCD of the machine). You can synchronize the time used by the machine on a regular - Brother International MFC-J4510DW | Network Users Manual - English - Page 51
Web Based Management NOTE • You must configure Date&Time to synchronize the time used by the machine with the SNTP time server. Click Date&Time>> and then configure Date and Time on the General screen. You can also configure the Date and Time from the machine's control panel. 5 • Choose the - Brother International MFC-J4510DW | Network Users Manual - English - Page 52
server on your local network or on the Internet. See the Software User's Guide for more details on Scan to FTP. a Click Scan on the machine's web page, and then click Scan to FTP/Network. b Choose FTP in the profile numbers (1 to 5) you want to use for Scan to FTP settings. You can also store two - Brother International MFC-J4510DW | Network Users Manual - English - Page 53
) is the standard way that computer users share files and printers in Windows®. See the Software User's Guide for more details on Scan to Network. NOTE Scan to Network is supported by Windows® only. 5 a Click Scan on the machine's web page, and then click Scan to FTP/Network. b Choose Network in - Brother International MFC-J4510DW | Network Users Manual - English - Page 54
Web Based Management Changing the LDAP configuration using a web browser (For MFC-J2510/J4510DW) (Available as a download) You can configure and change the LDAP settings using a web browser. a Click Network on the web page, and then click Protocol. b Choose the LDAP check box and then click Submit. - Brother International MFC-J4510DW | Network Users Manual - English - Page 55
Scan to E-mail server features, you can use the LDAP search to find fax numbers or E-mail addresses. NOTE The LDAP Protocol does not support (For MFC-J2510/J4510DW) (Available as a download) on page 48.) the steps below. For Scan to E-mail server, see Software User's Guide. a Load your document. - Brother International MFC-J4510DW | Network Users Manual - English - Page 56
LDAP operation (For MFC-J2510/J4510DW) If there is no match on the server and the local information, press the name you are looking for, and then press Detail. h If the result includes more than one fax number or E-mail address, press the location where you want to send a fax. i Press Apply. j - Brother International MFC-J4510DW | Network Users Manual - English - Page 57
E-mail server NOTE • In order to use this function, please download the necessary software from the Brother Solutions Center. (http://solutions.brother.com/) • You can send/receive IFAX documents in Letter or A4 format and in Black & White only. Forwarding received E-mail and fax messages You can - Brother International MFC-J4510DW | Network Users Manual - English - Page 58
Internet fax (For MFC models) (Available as a download) 1 2 3 3 1 Internet 2 Telephone line 3 E-mail server Important information fax: Factors such as the receiver's location, structure of the LAN system, and how busy the network (such as the Internet) is, may cause the system to take a long - Brother International MFC-J4510DW | Network Users Manual - English - Page 59
fax (For MFC models) (Available as a download) How to Internet fax 7 Before using an Internet fax you must configure your Brother machine to page 60.) 1 2 3 How to send an Internet fax 7 Sending an Internet fax is the same as sending a normal fax. (For more information, see the Basic User's Guide - Brother International MFC-J4510DW | Network Users Manual - English - Page 60
MFC models) (Available as a download) NOTE • If you wish to manually Guide. • You can register the E-mail address information from Web Based Management or Remote Setup. After the document is scanned information, a 42 page document based on the ITU-T Test Chart #1 test chart is approximately 1 - Brother International MFC-J4510DW | Network Users Manual - English - Page 61
period of time. For more details, see the Advanced User's Guide. • If the received mail is not in a plain text format or an attached file is not in the TIFF-F format, the following error message will be printed: "ATTACHED FILE FORMAT NOT SUPPORTED". If the received mail is too large, the following - Brother International MFC-J4510DW | Network Users Manual - English - Page 62
Internet fax (For MFC models) (Available as a download) Receiving an Internet fax to your computer 7 send a document is not running Windows® XP, Windows Server® 2003/2008, Windows Vista® or Windows® 7, please inform the computer's owner that they must install some software that can view TIFF-F files. - Brother International MFC-J4510DW | Network Users Manual - English - Page 63
Internet fax (For MFC models) (Available as a download) Additional Internet Fax options 7 Forwarding received in the Advanced User's Guide. Please see the Advanced User's Guide to check that this feature is supported. Relay broadcasting 7 This function allows the Brother machine to receive - Brother International MFC-J4510DW | Network Users Manual - English - Page 64
Internet fax (For MFC models) (Available as a download) 1 2 3 Relay broadcast from a machine [email protected] [email protected] 123456789 7 7 1 [email protected](fax#123456789) 1 Internet In this example, your machine has an E-mail address of [email protected], you wish to send a document - Brother International MFC-J4510DW | Network Users Manual - English - Page 65
For MFC models) (Available as a download) [email protected](fax#123456789) E-mail address Fax Phone Number The word "fax#" must be included with the phone number inside the parenthesis. Sending to multiple E-mail addresses: 7 If you want to have the document relayed to more than one standard - Brother International MFC-J4510DW | Network Users Manual - English - Page 66
fax (For MFC models) (Available as a download) Relay broadcast from a computer 7 [email protected] 123456789 1 [email protected](fax#123456789) support sending to multiple phone numbers. If your E-mail application cannot support multiple phone numbers you will only be able to relay to one - Brother International MFC-J4510DW | Network Users Manual - English - Page 67
(For MFC models) (Available as a download) when the machine or user reads or prints the received Internet Fax or E-mail. For example, if the message is opened for reading or is printed the receiver sends back a notification to the original sending machine or user. The receiver must support the MDN - Brother International MFC-J4510DW | Network Users Manual - English - Page 68
data that travels over it. Your Brother machine employs some of the latest page 63.) Secure Management using BRAdmin Professional 3 (Windows®) (See Secure Management using BRAdmin Professional 3 (Windows®) on page page 39.) If you disable FTP, the Scan to FTP function will be disabled. 8 62 - Brother International MFC-J4510DW | Network Users Manual - English - Page 69
can configure the POP3/SMTP settings on this page. NOTE • For more information, see the Help Test E-mail Send/Receive Configuration dialog appears. i Follow the on-screen instructions if you want to test with the current settings. Sending an E-mail with user authentication 8 This machine supports - Brother International MFC-J4510DW | Network Users Manual - English - Page 70
features NOTE • You can change the SMTP port number using Web Based Management. This is useful if your ISP (Internet Service Provider) implements the "Outbound Port 25 Blocking (OP25B)" service. • If you can use both POP before SMTP and SMTP-AUTH, we recommend choosing SMTP-AUTH. • If you choose POP - Brother International MFC-J4510DW | Network Users Manual - English - Page 71
to use the latest version of the BRAdmin Professional 3 utility that is available as a download from http://solutions.brother.com/. If you use an older version of BRAdmin 1 to manage your Brother machines the user authentication will not be secure. If you are managing a mixed group of older print - Brother International MFC-J4510DW | Network Users Manual - English - Page 72
the machine. The ink cartridges are installed properly. The front and back covers are fully closed. Paper is inserted properly in the paper tray. (For wired networks) A network cable is securely connected to the Brother machine and the router or hub. 9 Go to the page for your solution from - Brother International MFC-J4510DW | Network Users Manual - English - Page 73
the utility, see the Downloads page for your model at http://solutions.brother.com/. Reconfirm and choose the correct security settings. • The manufacturer's name or model no. of the WLAN access point/router may be used as the default security settings. • See the instructions supplied with your - Brother International MFC-J4510DW | Network Users Manual - English - Page 74
access point/router. The Brother machine cannot print or scan over the network. The Brother machine is not found on the network even after successful installation. Question Interface Solution Are you using security software? wired/ See I'm using security software. on page 70. wireless Is your - Brother International MFC-J4510DW | Network Users Manual - English - Page 75
Program Files or Program Files (x86), Browny02, Brother, BrotherNetTool.exe to run the program. NOTE If the User Account Control screen appears, (Windows Vista®) Click Allow. (Windows® 7) Click Yes. 3 Follow the on screen instructions. 4 Check the diagnosis by printing the Network Configuration - Brother International MFC-J4510DW | Network Users Manual - English - Page 76
on the printed report. See Quick Setup Guide: Troubleshooting See The Brother machine is not found on the network during the MFL-Pro Suite installation. on page 67. I have checked and tried all of above, however the Brother machine does not print/scan. Is there anything else I can do? wired - Brother International MFC-J4510DW | Network Users Manual - English - Page 77
on page 33.) If the printed WLAN report shows the connection failed, check the error code on the printed report. See Quick Setup Guide: Troubleshooting I have checked and tried all of the above, however, I'm still having problems. Is there anything else I can do? wireless See the instructions - Brother International MFC-J4510DW | Network Users Manual - English - Page 78
Section II Network Glossary II Types of network connections and protocols 73 Configuring your machine for a network 78 Wireless network terms and concepts 80 Additional network settings from Windows® 83 - Brother International MFC-J4510DW | Network Users Manual - English - Page 79
method as it is easier to configure than the Network Shared printing method. See Network Shared printing on page 73. Each computer must use the TCP/IP Protocol. The Brother machine needs an appropriate IP address configuration. If you are using a router, the Gateway address must be configured - Brother International MFC-J4510DW | Network Users Manual - English - Page 80
larger network, we recommend a Network Shared printing environment. 10 The "server" or the "print server" must use the TCP/IP print protocol. The Brother machine needs to have an appropriate IP address configuration unless the machine is connected via the USB or the parallel interface at the - Brother International MFC-J4510DW | Network Users Manual - English - Page 81
on the Brother machine supports the TCP/IP (Transmission Control Protocol/Internet Protocol) protocol. TCP/IP is the most popular set of protocols used for communication such as Internet and E-mail. This protocol can be used in almost all operating systems such as Windows®, Windows Server®, Mac OS - Brother International MFC-J4510DW | Network Users Manual - English - Page 82
the machine icon from the Network folder. (See Installing drivers used for printing and scanning via Web Services (Windows Vista® and Windows® 7) on page 84.) For details about scanning using Web Services, see the Software User's Guide. The Web Services also lets you check the current status of the - Brother International MFC-J4510DW | Network Users Manual - English - Page 83
Synchronize with SNTP server on page 44.) CIFS 10 The Common Internet File System is the standard way that computer users share files and printers in Windows®. LDAP (For MFC-J2510/J4510DW) 10 The Lightweight Directory Access Protocol (LDAP) allows the Brother machine to search for information such - Brother International MFC-J4510DW | Network Users Manual - English - Page 84
from the range 169.254.1.0 to 169.254.254.255. For more information on APIPA, see Using APIPA to configure the IP address on page 91. Subnet mask 11 Subnet masks restrict network communication. Example: Computer 1 can talk to Computer 2 • Computer 1 IP Address: 192.168.1.2 Subnet Mask: 255.255 - Brother International MFC-J4510DW | Network Users Manual - English - Page 85
your machine for a network Subnet Mask: 255.255.255.000 Where the 0 is in the Subnet mask, there is no limit to communication at this part of the address. What this means in the above example is, we can communicate with any device that has an IP address that begins with - Brother International MFC-J4510DW | Network Users Manual - English - Page 86
terms and concepts 12 Specifying your network 12 SSID (Service Set Identifier) and channels 12 You need to configure the its own unique network name and it is technically referred to as an SSID or ESSID (Extended Service Set Identifier). The SSID is a 32-byte or less value and is assigned to the - Brother International MFC-J4510DW | Network Users Manual - English - Page 87
machine in a wireless network at home, without IEEE 802.1x support. Authentication methods 12 Open system Wireless devices are allowed Fi Protected Access Pre-shared key (WPA-PSK/WPA2-PSK), which enables the Brother wireless machine to associate with access points using TKIP for WPA-PSK or AES - Brother International MFC-J4510DW | Network Users Manual - English - Page 88
Wireless network terms and concepts • If you want to connect to your wireless network using IEEE 802.11n, we recommend to choose AES. Network key 12 Open system/Shared key with WEP This key is a 64-bit or 128-bit value that must be entered in an ASCII or hexadecimal format. • 64 (40) bit ASCII: - Brother International MFC-J4510DW | Network Users Manual - English - Page 89
13 The following features are available to use if you want to configure additional network settings. Web Services for printing and scanning (Windows Vista® and Windows® 7) Vertical Pairing (Windows® 7) NOTE Verify the host computer and the machine are either on the same subnet, or that the - Brother International MFC-J4510DW | Network Users Manual - English - Page 90
process. Drivers used for printing and scanning via Web Services can be installed by right-clicking the printer icon on the computer, and the computer's Web Services port (WSD port) will be created automatically. (For details about scanning using Web Services, see the Software User's Guide.) NOTE - Brother International MFC-J4510DW | Network Users Manual - English - Page 91
network settings from Windows® Uninstalling drivers used for printing and scanning via Web Services (Windows Vista® and Windows® 7) 13 To uninstall Web Services from a computer, follow the instructions below. a (Windows Vista®) Click , then choose Network. (Windows® 7) Click , Control Panel - Brother International MFC-J4510DW | Network Users Manual - English - Page 92
(Windows® 7) 13 Windows® Vertical Pairing is a technology to allow your Vertical Pairing supported wireless machine to connect to your Infrastructure network using the PIN Method of Wi-Fi Protected Setup and the Web Services feature. This also enables the printer and scanner driver installation - Brother International MFC-J4510DW | Network Users Manual - English - Page 93
Section III Appendixes II I Appendix A 88 Appendix B 89 - Brother International MFC-J4510DW | Network Users Manual - English - Page 94
A Appendix A A Supported protocols and security features A Interface Network (common) LPR/LPD, Custom Raw Port/Port9100, IPP, mDNS, FTP Server, SNMPv1, TFTP, Scanner Port, Web Services (Print/Scan), SMTP Client, POP before SMTP, SMTP-AUTH, POP3, APOP, FTP Client, SNTP Client, CIFS Client SSID - Brother International MFC-J4510DW | Network Users Manual - English - Page 95
print server provides the following predefined services (do a SHOW SERVICE command in the Brother print server remote console to see a list of available services): Enter HELP at the command prompt for a list of supported commands. Service (Example) BINARY_P1 TEXT_P1 BRNxxxxxxxxxxxx Definition TCP - Brother International MFC-J4510DW | Network Users Manual - English - Page 96
users and administrators) B Using DHCP to configure the IP address B The Dynamic Host Configuration Protocol (DHCP) is one (For MFC models) or Web Based Management (web browser). The Brother print server network) Where the first entry is the MAC Address (Ethernet Address) of the print server - Brother International MFC-J4510DW | Network Users Manual - English - Page 97
etc/services file on your host as a real service; (1 for Ethernet), MAC Address (Ethernet Address) software implementations will not respond to BOOTP requests if you have not included a download The Brother print server supports the Automatic is available on Windows® systems that have TCP - Brother International MFC-J4510DW | Network Users Manual - English - Page 98
print server. For example: Windows® systems Windows® systems require the dash "-" character between each digit of the MAC Address (Ethernet Address). arp -s using BOOTP, DHCP or RARP your Brother print server can receive an IP address from any one of these IP address allocation systems. In - Brother International MFC-J4510DW | Network Users Manual - English - Page 99
installer application 12 Brother Solutions Center 6, 8 C Channels 80 CIFS 77 Control Panel 24 Custom Raw Port 76 D DHCP 75, 90 DNS client 75 DNS Server 26 Driver Deployment Wizard 3 E Encryption 81 Ethernet 27 F Factory Default 31 FTP 76 G Gateway 25 H HTTP 76 Hyper Text Transfer - Brother International MFC-J4510DW | Network Users Manual - English - Page 100
Status Monitor 3 Subnet Mask 25 Subnet mask 78 T TCP/IP 24, 75 TEXT_P1 89 TKIP 81 V Vertical Pairing 3, 83 W Web Based Management (web browser 3, 5 Web Services 76, 84, 85 WEP 81 Wi-Fi Protected Setup 14, 15, 26, 27 WINS 75 WINS Config 25 WINS Server 25 Wireless network 9, 80 WLAN - Brother International MFC-J4510DW | Network Users Manual - English - Page 101
Hôtel de Ville, Dollard-des-Ormeaux, QC, CANADA H9B 3H6 Visit us on the World Wide Web http://www.brother.com/ This product is approved for use in the country of purchase only. Local Brother companies or their dealers will only support machines purchased in their own countries. www.brotherearth.com
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
 |
 |
Network User’s Guide
Multi-Protocol On-board Ethernet Multi-function Print Server
and Wireless Multi-function Print Server
This Network User’s Guide provides useful information of wired and
wireless network settings, security settings and Internet fax settings
(For MFC models) using your Brother machine. You can also find
supported protocol information and detailed troubleshooting tips.
To find basic information about network and advanced network
features of your Brother machine, see the
Network Glossary
.
To download the latest manual, please visit the Brother Solutions
Center at (http://solutions.brother.com/
). You can also download the
latest drivers and utilities for your machine, read FAQs and
troubleshooting tips or learn about special printing solutions from the
Brother Solutions Center.
Version 0
ENG