Brother International MFC-J815DW XL Quick Setup Guide
Brother International MFC-J815DW XL Manual
 |
View all Brother International MFC-J815DW XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International MFC-J815DW XL manual content summary:
- Brother International MFC-J815DW XL | Quick Setup Guide - Page 1
Setup Guide Product Safety Guide Brother Installation Disc NOTE Manuals in Spanish for this model are available at support.brother.com. Manuales en Español para este modelo están disponibles en support.brother.com. • Most of the illustrations in this Quick Setup Guide show the MFC-J815DW. • Save - Brother International MFC-J815DW XL | Quick Setup Guide - Page 2
using your mobile device. Additional Wireless Support: support.brother.com/wireless-support For FAQs, Troubleshooting, and to download software and manuals, visit support.brother.com. For product specifications, see the Online User's Guide. © 2019 Brother Industries, Ltd. All rights reserved.
-
1 -
2
 |
 |
NOTE
Manuals in Spanish for this model are available at
support.brother.com
.
Manuales en Español para este modelo están disponibles en
support.brother.com
.
•
Most of the illustrations in this Quick Setup Guide show the MFC-J815DW.
•
Save all packing materials and the box in case you must ship your machine.
•
You must purchase the correct interface cable for the interface you want to
use. A USB cable is included in some countries.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet
(2 meters) long.
2
Load paper in the paper tray
1
Unpack the machine and check the components
The components included in the box may differ depending on your country.
Remove the protective tape or film covering the machine.
Follow the steps on the LCD to unpack and install the ink cartridges. Close the ink cartridge
cover. The machine will prepare the ink tube system for printing.
NOTE
The first time you install the ink cartridges, the machine will use extra ink to fill the ink delivery tubes.
This is a one-time process that enables high-quality printing.
When the machine has finished the initial cleaning process,
follow the steps on the LCD to configure the machine settings.
•
Set Firmware Update defaults
•
Check print quality
•
Print the installation sheet
NOTE
You can adjust the control panel angle
to read the LCD more easily.
Quick Setup Guide
MFC-J805DW / MFC-J815DW
Read the
Product Safety Guide
first, then read this
Quick Setup Guide
for the correct installation procedure.
3
Connect the
power cord
4
Install the starter ink cartridges
5
Set the date and time
6
Machine settings
D01D7S001-01
USA/CAN
Version B
Starter Ink Cartridges
•
Black
•
Yellow
•
Cyan
•
Magenta
Quick Setup Guide
Product Safety Guide
Brother Installation Disc
Telephone Line Cord
1.
Press
Settings
.
2.
Press
a
or
b
to select the following:
a.
Select
[Initial Setup]
, and then press
OK
.
b.
Select
[Local Language]
, and then press
OK
.
c.
Select your language, and then press
OK
.
3.
Press
Stop/Exit
.
1.
Press
Settings
.
2.
Press
a
or
b
to select the following:
a.
Select
[Fax]
, and then press
OK
.
b.
Select
[Setup Receive]
, and then press
OK
.
c.
Select
[Receive Mode]
, and then press
OK
.
d.
Select your Receive Mode, and then press
OK
.
3.
Press
Stop/Exit
.
Store your name and fax number so the machine prints it on all
outgoing fax pages.
For more information, see
Enter Text on Your Brother Machine
in the
Online User’s Guide
.
1.
Press
Settings
.
2.
Press
a
or
b
to select the following:
a.
Select
[Initial Setup]
, and then press
OK
.
b.
Select
[Station ID]
, and then press
OK
.
c.
Select
[Fax]
, and then press
OK
.
3.
Enter your fax number (up to 20 digits), and then press
OK
.
4.
Press
a
or
b
to select
[Name]
, and then press
OK
.
5.
Enter your name (up to 20 characters), and then press
OK
.
6.
Press
Stop/Exit
.
8
Select your language
(if needed)
10
Set your Station ID
If you are not using your machine as a fax, go to
11
.
7
Connect the telephone line cord
If you are not using your machine as a fax, go to
8
.
For more information on using the fax feature, see the
Online User’s Guide
.
9
Select the correct
Receive Mode
If you are not using your machine as a fax, go to
11
.
The latest manuals are available at the Brother Solutions Center:
support.brother.com/manuals
Follow the prompts displayed on the LCD to set the date and time.
Open the ink cartridge cover.
Open the output paper tray
cover
a
.
Fan the paper well and load it in the tray.
Close the output paper tray cover, and
then slowly push the tray completely
into the machine.
Adjust the paper guides.
NOTE
Pull out the paper support
a
, and unfold
the paper support flap
b
so that the
printed pages do not fall.
Watch our FAQ Videos for help
with setting up your Brother
machine.
support.brother.com/videos
1
2
1