Brother International PR-600II Users Manual - English
Brother International PR-600II Manual
 |
View all Brother International PR-600II manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International PR-600II manual content summary:
- Brother International PR-600II | Users Manual - English - Page 1
EMBROIDERY MACHINE PR-600 OPERATION MANUAL - Brother International PR-600II | Users Manual - English - Page 2
any adjustments in the needle area, such as changing the needle. 14. Always unplug the machine from the electrical outlet when lubricating it or when making any other user servicing adjustments mentioned in the manual. 15. This sewing machine is not intended for use by young children or infirm - Brother International PR-600II | Users Manual - English - Page 3
CYPRUS ONLY If this machine is fitted with a replaced, use a fuse approved by ASTA to BS 1362, i.e. carrying the mark, rating as marked on plug. Always replace the fuse cover, never use appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows - Brother International PR-600II | Users Manual - English - Page 4
: (908) 704-1700 declares that the product Product Name: Brother Sewing Machine Model Number: PR-600II complies with Part 15 of the FCC Rules. Operation is subject generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause - Brother International PR-600II | Users Manual - English - Page 5
of the most advanced computerized household embroidery machines. To fully enjoy all the features available, we suggest that you study the manual before using the machine. PLEASE READ BEFORE USING THIS MACHINE For safe operation 1. Be sure to keep your eye on the needle while sewing. Do not touch the - Brother International PR-600II | Users Manual - English - Page 6
BROTHER retains ownership of all rights to CONTENT and to the copies of the CONTENT included in this package. The CONTENT are licensed (not sold) to you ("CUSTOMER") under the terms and conditions of this Agreement. CUSTOMER is licensed to: • Use the CONTENT in combination with an embroidery machine - Brother International PR-600II | Users Manual - English - Page 7
Warning Labels The following warning labels are on the machine. Be sure to observe the precautions described in the labels. 1 2 Please put a drop of oil onto the hook once a day before use. Label locations vi - Brother International PR-600II | Users Manual - English - Page 8
protective cases. • If an embroidery card other than our original embroidery cards are used, the embroidery machine may not operate correctly. Be sure to use only recommended embroidery cards. • Some licensed or copyright embroidery cards cannot be used with this embroidery machine. • Embroidery - Brother International PR-600II | Users Manual - English - Page 9
different according to their corresponding needle bar number. 2 1 Needle bar 1 2 Needle 1 3 Needle bar case The machine automatically assigns a thread color to each needle. If a needle is already threaded by a color that will be used on the next pattern the machine will assign the color to that - Brother International PR-600II | Users Manual - English - Page 10
the thread spools to be changed, and the corresponding instructions appear on the LCD. Differences with single-needle machines ■ Can sew embroidery patterns using six or less colors without the need to replace the thread spools With single-needle machines, the thread spool must be changed and the - Brother International PR-600II | Users Manual - English - Page 11
changes to inform you of whether or not the machine is locked. Lit in red Flashing in green ■ Automatic needle-threading mechanism Using the automatic needle-threading mechanism, the needle can easily be threaded. The machine is locked. The machine can be started. ■ Wide selection of built-in - Brother International PR-600II | Users Manual - English - Page 12
In addition to the many lettering patterns, embroidery patterns and frame patterns built into the machine, if an optional embroidery card is used, many more embroidery patterns are available. ■ Embroidery pattern editing Lettering and embroidery patterns can be combined or a text arrangement - Brother International PR-600II | Users Manual - English - Page 13
Manual Structure This manual is constructed as described below. Read before use Chapter 1: Getting Ready The setup of the embroidery machine and the various preparations required before starting to sew are described in this chapter. Chapter 2: Embroidering Tutorial This chapter describes the - Brother International PR-600II | Users Manual - English - Page 14
...9 Preparing the thread guide assembly ...10 Positioning the spool stand...11 Attaching the embroidery frame holder ...11 EMBROIDERING TUTORIAL 13 Operating Precautions...14 Power supply precautions ...14 Needle precautions ...15 Checking the needle ...15 Bobbin precautions ...15 Upper thread - Brother International PR-600II | Users Manual - English - Page 15
Being Performed Before the Machine Was Turned OFF 62 Changing the Needle ...63 Replacing the needle...63 Correctly Using the Embroidery Frames 65 Embroidery frame types and applications ...65 Attaching Iron-On Stabilizer (Backing) to Fabric 66 Hooping the Fabric...67 Hooping the fabric in the - Brother International PR-600II | Users Manual - English - Page 16
the pattern...131 Editing a Combined Pattern 132 Saving Embroidery Patterns 136 Machine's Memory ...136 If the Embroidery Pattern Cannot Be Saved ...136 USB Media (Commercially Available) ...137 BASIC SETTINGS AND HELP FEATURE 139 Using the Settings Key ...140 Understanding the settings screen - Brother International PR-600II | Users Manual - English - Page 17
appliqués (1 157 Using a frame pattern to create appliqués (2 158 Helpful Tips for the Operation of PR-600II 160 Checking the thread tension of built-in patterns 160 Sewing a pattern aligned with a mark on the fabric 161 Color thread table ...163 Colors of Tajima (.dst) embroidery data ...163 - Brother International PR-600II | Users Manual - English - Page 18
the PR-600II, first refer to "Included Accessories" on page 4, and check that all listed accessories are included. After checking that all accessories are included, the embroidery machine can be set up. The setup of the PR-600II and the various preparations required before starting to sew are - Brother International PR-600II | Users Manual - English - Page 19
frame to the carriage. When the machine is turned on or when the machine does embroidery, the carriage moves forward, backward, left and right. 4 Lower thread guide 5 Hook cover/Hook Open the hook cover, and then insert the bobbin case into the hook. 6 Thread guide 7 Thread guide assembly support - Brother International PR-600II | Users Manual - English - Page 20
Flashing in green: When the machine can start sewing Lit in green : While the machine is sewing Off : When the machine is turned off 4 2 Thread trimming button Press the thread trimming button to trim both the upper and the bobbin threads. 3 Automatic needle-threading button Press the automatic - Brother International PR-600II | Users Manual - English - Page 21
machine. Make sure to use the accessories supplied with this machine. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32 No. Part Name Model Name Parts Code 1 Accessory case XC6482-051 2 Needle - Brother International PR-600II | Users Manual - English - Page 22
accessories. 1. 2. 3. 4. 5. 1 1. Advanced cap frame set Model Name: PRCF2 Parts Code: XC7609-052 (See instructions on page 169.) 6. Embroidery card 2. Standard cap frame Model Name: PRCFH1 Parts Code: XC6958-052 3. Advanced cap frame Model name: PRCFH2 Parts Code: XC7610-052 4. Hooping - Brother International PR-600II | Users Manual - English - Page 23
GETTING READY Setting Up the Machine The procedures for setting up the machine are described below. If the machine is not set up correctly, it may shake or produce loud noises and the embroidery will not be sewn correctly. An optional sewing stand is also available. Setup and transporting - Brother International PR-600II | Users Manual - English - Page 24
• Place no objects within the moving range of the embroidery frame • Set-up machine near an electrical outlet • Use a level and stable surface, such as a desk • Use a surface that can support the weight of the machine (about 37 kg (81 Ibs.)) • Allow open space around the ventilation slots at the - Brother International PR-600II | Users Manual - English - Page 25
Adjust the legs so that the machine is steady. 3 Use the included wrench to loosen the lock 1 nut on the leg that you wish to adjust. 1 2 1 Lock nut 2 Adjustable foot nut X The foot can be turned. 1 Lock nut Press down on each corner of the embroidery 6 machine to check that it is stable. If it - Brother International PR-600II | Users Manual - English - Page 26
operation panel, adjust the operation panel to an easy-to-view angle, and then tighten the thumb screws. 1 1 (Side view) 1 Thumb screws (Top view) Note ● Using the disc-shaped screwdriver included, loosen and firmly tighten the five thumb screws. Setting Up the - Brother International PR-600II | Users Manual - English - Page 27
Phillips screwdriver, loosen the 1 screws on the left side of the thread guide assembly support so that the thread guide assembly can be raised. Remove screw 1, and then turn screw 2 three or four times to loosen it. Using the Phillips screwdriver, loosen the 3 screws on the left and right sides - Brother International PR-600II | Users Manual - English - Page 28
tighten the thumb screw. 1 Thumb screws Align the holes in the embroidery frame 2 holder with the pins on the frame-mounting plate of the carriage. X Secure the spool stand in the opened position. 1 Pins on the frame-mounting plate 2 Holes in the embroidery frame holder Setting Up the Machine 11 - Brother International PR-600II | Users Manual - English - Page 29
GETTING READY Secure the embroidery frame holder with the 3 two thumb screws. 1 Use the thumb screws removed in step 1. Note ● Using the disc-shaped screwdriver included, firmly tighten the thumb screws. This completes the preparation of the machine. 12 - Brother International PR-600II | Users Manual - English - Page 30
Embroidering Setting 5 Previewing the Image 6 Hooping the Fabric in the Embroidery Frame 7 Attaching the Embroidery Frame to the Machine 8 Checking the Embroidery Area 9 Upper Threading 10 Sewing the Embroidery 11 Checking the Thread Tension 12 Removing the Embroidery Frame and Fabric 13 Turning OFF - Brother International PR-600II | Users Manual - English - Page 31
of the following occur, turn off the embroidery machine and unplug the power supply cord, otherwise a fire, an electric shock or damage to the machine may result. • When you are away from the machine. • After using the machine. • If a power outage occurs while the machine is being operated. • If the - Brother International PR-600II | Users Manual - English - Page 32
- threading mechanism or result in injuries. ● Never use bent needles. Bent needles can easily break, possibly resulting in injuries. 2 Checking the needle Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated. Place the flat side of the - Brother International PR-600II | Users Manual - English - Page 33
used (120 den x 2 / 135 dtex x 2 / 40 weight (in Americas and Europe) / #50 (in Japan)). Fabric recommendations Be sure to observe the following recommendations concerning the fabric. Note ● Your machine can embroider fabric that is up to 1 mm (3/8 inch) thick. If thicker fabric is sewn, the needle - Brother International PR-600II | Users Manual - English - Page 34
Check the previewed image. p. 27 7 Hoop the fabric in the embroidery frame. p. 28 p. 16 8 Attach the embroidery frame to the machine. p. 30 9 Check the embroidery are provided in the tables on pages 49 to 57. Use these tables for quick reference. The various operating precautions that - Brother International PR-600II | Users Manual - English - Page 35
to "Oiling the machine" on page 196. Note ● Put a drop of oil onto the hook once a day before use. 1 Thread Picker To gain access to the bobbin case easily, pull the thread picker toward front. Note ● Thread picker is a device that is used to hold the thread when begining to sew or when trimming - Brother International PR-600II | Users Manual - English - Page 36
the bobbin case until it snaps 1 into place. 2 3 4 5 6 Close the hook cover. 2 7 8 9 10 11 Memo 12 ● This embroidery machine is not equipped with a bobbin-winder. Use pre-wound (L 13 type) bobbins. ● The optional bobbin winder (stand-alone type) and optional metal bobbins can - Brother International PR-600II | Users Manual - English - Page 37
position, the needle bar case moves and the number 1 needle bar moves to the embroidering position. CAUTION ● Make sure to keep your hands and other items away from the carriage, in order to prevent any injuries. Switch on the main power switch on the back 3 of the machine to "I". X The - Brother International PR-600II | Users Manual - English - Page 38
the embroidery machine settings. p. 140 4 Machine 2 operations guide Touch this key to check a machine operation. key p.151 5 3 New embroidery Cancels all operations previously performed and returns to key the initial pattern group selection screen. 6 7 When a problem occurs, for - Brother International PR-600II | Users Manual - English - Page 39
. In the embroidering screen, check the thread colors assigned to the needle bars, and then install the upper threads.Touch the unlock key so that the start/stop button starts flashing in green and the embroidery machine is ready to begin sewing. After the embroidery is sewn, the embroidering - Brother International PR-600II | Users Manual - English - Page 40
pattern shown at the right, on the last page of the embroidery patterns. In the pattern type selection screen, select a pattern category 4 5 6 7 1 Pattern keys 8 2 Displays a preview image. 9 ■ Checking a preview image from the pattern selection screen Touch to preview the image prior to - Brother International PR-600II | Users Manual - English - Page 41
display the last page. • To select a pattern group other than the embroidery patterns, touch 1 Cancel key The pattern type selection screen appears. • When by 4, which can be used to change the pattern size or mirror image the pattern. The functions that can be used differ depending on the type of - Brother International PR-600II | Users Manual - English - Page 42
of embroidery frames that can be used to sew the currently selected embroidery pattern 2 Shows the size of the currently selected embroidery pattern interrupted and the machine is turned off, the operation can be continued after the 8 machine is turned on again. When the machine is turned on - Brother International PR-600II | Users Manual - English - Page 43
checked and a pattern can be saved for later use check the embroidering area. 5 Continues to the next screen 6 Touch to edit the pattern. 7 Touch these keys to specify how the pattern will be embroidered. 8 Touch to store the pattern. 9 In the embroidering settings screen, the embroidery frame guide - Brother International PR-600II | Users Manual - English - Page 44
6. Previewing the Image You can view an image of the completed pattern within the embroidery frame. Checking a preview image Display the preview image to check that the embroidery will be sewn as desired. Touch . 1 Memo ● The preview image can also be displayed from the pattern editing screen. - Brother International PR-600II | Users Manual - English - Page 45
EMBROIDERING TUTORIAL 7. Hooping the Fabric in the Embroidery Frame After selecting the pattern to be embroidered, check which embroidery frames can be used to sew the pattern. Select the appropriate frame, and hoop the fabric and stabilizer in the embroidery frame. (Refer to "Attaching Iron-On - Brother International PR-600II | Users Manual - English - Page 46
to 9 achieve the best embroidering results. (Refer to "Hooping Techniques" on page 166.) 10 Memo 11 ● This embroidery machine can also be used with the optional cap frames. (Refer to 12 "Using the Optional Cap Frame" on page 169.) 13 14 Hooping the Fabric in the Embroidery Frame 29 - Brother International PR-600II | Users Manual - English - Page 47
of the embroidery machine. Note ● Before attaching the embroidery frame, check that there is enough thread in the bobbin. Attaching the embroidery frame Adjust the width of the embroidery frame holder to the size of the embroidery frame, and then attach the embroidery frame to the machine. As an - Brother International PR-600II | Users Manual - English - Page 48
large embroidery frame 3 Mark for medium embroidery frame 4 Mark for embroidery frame for industrial embroidery machines (When using embroidery frames for industrial embroidery machines, THE MACHINE DOES NOT RECOGNIZE THE SEWING AREA OF THE FRAME. Be sure to use the trial sewing function to check - Brother International PR-600II | Users Manual - English - Page 49
, touch . Carefully watch the movement of the embroidery frame and check that the embroidery is sewn in the desired location and that the embroidery frame does not hit the presser foot. ■ Stop checking the embroidery frame area. The embroidery frame can be temporarily stopped at a desired position - Brother International PR-600II | Users Manual - English - Page 50
colors In the embroidering settings screen, touch to display the embroidering screen and the message instructing that the needle bars be threaded (that the thread spools from the previous time be changed). Check 2 the thread colors in this screen. Embroidering screen (For details on the keys - Brother International PR-600II | Users Manual - English - Page 51
screen is touched, the start/stop button begins flashing in green and the embroidery machine can start sewing. If the upper threading is being performed or the needle is being threaded, be careful that the embroidery machine is not accidentally started, otherwise injuries may result. 34 - Brother International PR-600II | Users Manual - English - Page 52
Upper threading Use embroidery thread to thread the needle bars in order, starting with needle bar 1. Press → → on the LCD (see page 151). → → (To page 3) in order to view a video of the operation CAUTION ● When threading the upper thread, carefully follow the instructions. If the upper - Brother International PR-600II | Users Manual - English - Page 53
for needle bar 1. Pass the thread through the number 1 hole in 2 the thread guide just above the spool, and then pass the thread through the number 1 hole in the thread guide toward the front of the machine. 2 1 • Make sure that the spool stand is opened in the shape of a V. • When using small - Brother International PR-600II | Users Manual - English - Page 54
disc. 1 2 3 4 5 6 1 Thread tension disc • Make sure that the thread is securely caught 7 in the thread tension disc and passed correct thread guide pins. (See left illustration at top of page.) 8 9 Note ● All thread tension disks are threaded in 10 clockwise direction. 11 12 13 - Brother International PR-600II | Users Manual - English - Page 55
number 1 slot to 7 pass it through the number 1 take-up lever hole from right to left. 1 1 Hole in lower thread guide Use the included threader to pass the thread 9 into the number 1 needle bar thread guide. 1 1 Thread take-up lever 38 1 Needle bar thread guide 2 Needle changing tool (Threader) - Brother International PR-600II | Users Manual - English - Page 56
Threading the needle Use the automatic needle-threading mechanism to thread the needle. Press → → → (to page 2) → in order to view a video of the operation on the LCD (see page 151). Press the automatic needle-threading button. 1 Note ● To avoid damage, the automatic needle- threading - Brother International PR-600II | Users Manual - English - Page 57
cannot be threaded with the automatic needle-threading mechanism. For the remaining needle bars, perform the following operation to move the needle bar to the embroidery position before trying to thread the needle. ■ Moving the needle bar to be threaded to the sewing position Touch the key for the - Brother International PR-600II | Users Manual - English - Page 58
After upper threading is finished, check again to make sure that currently being used between the spool and the thread guide above the needle. (Refer to page 78.) ■ Using the spool net When using metallic thread or any other strong thread, place the included spool net over the spool before sewing - Brother International PR-600II | Users Manual - English - Page 59
as the needle, needle bar case, thread takeup lever and carriage, otherwise injuries may result. ■ Locking mechanism For safety reasons, this embroidery machine is equipped with a locking function. Normally, the embroidery machine is locked (it cannot start sewing). Unless the machine is unlocked - Brother International PR-600II | Users Manual - English - Page 60
X The following screen appears. ■ Continuing embroidering To sew the same pattern again, touch . 1 A red frame around the thread information box indicates which needle bar is currently being used for sewing. • While the embroidery machine is sewing, the point being sewn is indicated by the green - Brother International PR-600II | Users Manual - English - Page 61
sewing, after checking that the upper thread is taut, touch the unlock key, and then press the start/stop button. X The bobbin and upper threads are trimmed. • Before turning off the embroidery machine while sewing If a problem occurs while sewing, such as if the thread breaks, the machine stops - Brother International PR-600II | Users Manual - English - Page 62
be checked after the first 100 stitches of each color sewn with each 8 needle bar. ● The resulting embroidery may not appear as expected, due to the type or thickness of the 9 fabric being sewn or to the type of stabilizer material used. Be sure to sew a trial 10 embroidery before sewing on - Brother International PR-600II | Users Manual - English - Page 63
flashing in green, the machine may start sewing. If the machine accidentally starts operating, injuries may result. ● When removing the embroidery frame, be careful that the embroidery frame does not hit any other part of the machine. ● Do not lift up the embroidery frame holder with extreme force - Brother International PR-600II | Users Manual - English - Page 64
screen or the pattern list screen is displayed with no pattern selected, the pattern type selection screen appears when the machine is turned 2 on again. X The embroidery machine is turned off and the display and the start/stop button indicator goes off. Unplug the power supply cord from - Brother International PR-600II | Users Manual - English - Page 65
● If the machine is turned off while it is sewing, embroidering can continue when the machine is turned on again. (Refer to "Resume Embroidering After Turning OFF the Machine" on page 83.) Turned off while embroidering ↓ Turned ON After the opening screen ● If the embroidery machine is turned off - Brother International PR-600II | Users Manual - English - Page 66
to change the embroidery machine settings. p. 140 Machine 2 operations guide Touch this key to check a machine operation. key p.151 3 New embroidery Cancels all operations previously performed and returns to key the initial pattern group selection screen. When a problem occurs, for example - Brother International PR-600II | Users Manual - English - Page 67
Embroidery pattern key Description The embroidery pattern for a design can be selected. Reference Page p. 104 2 Frame patterns key 12 stitch types can be combined with 10 frame 117 By using the included USB cable to connect 0 Computer (USB) key a computer to the embroidery machine, p. 114 - Brother International PR-600II | Users Manual - English - Page 68
Number of thread Shows the number of thread color changes for the currently color changes selected embroidery pattern. 4 Page Shows the number of the currently displayed page and the total number of . p. 102 *Some patterns cannot be edited with 9, 0 or A. Screen Quick Reference Guide 51 - Brother International PR-600II | Users Manual - English - Page 69
screen In this screen, the pattern can be edited. No. Display Key Name Description Reference Page 1 Embroidery frame indicators Shows the sizes of embroidery frames that can be used to sew the embroidery pattern currently displayed in the pattern display area. p. 28 Shows the size of the - Brother International PR-600II | Users Manual - English - Page 70
when the embroidery pattern consists of multiple patterns that have been combined. Positioning keys Moves the sewing position of the of the pattern that is being edited; can only be used if an alphabet or frame pattern is selected. Changes the color of the pattern. Screen Quick Reference Guide 53 - Brother International PR-600II | Users Manual - English - Page 71
In addition, the embroidering position can be checked and a pattern can be saved for later use. No. Display Key Name Description Reference Page 1 Embroidery frame indicators Shows the sizes of embroidery frames that can be used to sew the embroidery pattern currently displayed in the pattern - Brother International PR-600II | Users Manual - English - Page 72
sewing speed. p.91 Starting/ending Specifies the needle position at the beginning of position key sewing and at the end. p.89 Trial sewing key Moves the embroidery frame so that the embroidering position can be checked screen and the embroidering settings screen. Screen Quick Reference Guide 55 - Brother International PR-600II | Users Manual - English - Page 73
passed sewing. 8 Time until the spools must be replaced If the pattern contains seven or more colors, the amount of time until the spools change is shown. p. 75 Touch a key to move the needle bar position to the selected 9 Needle bar needle bar number. key Use when threading the needle with - Brother International PR-600II | Users Manual - English - Page 74
Description While sewing embroidery, touch this key for the machine to stop as the next color begins. Reference Page p. 92 C Cancel key Touch this key to quit sewing and return to the embroidering settings screen. Temporary D needle bar Enables the needle bar settings to manually be specified - Brother International PR-600II | Users Manual - English - Page 75
and also you can connect your machine to your PC via USB Type needle that is placed above the needle hole in the needle plate. The needle bar case is moved to position that particular needle with the next thread color to the "embroidery position". Also when using the needle threader, the needle - Brother International PR-600II | Users Manual - English - Page 76
from under the upper thread guide plates. (Refer to page 36.) - Check that the position of the upper thread is around the thread tension disk. (Refer to page 37.) the PC to the machine. - Optional embroidery cards - Embroidery patterns created by digitizing software program - The patterns saved - Brother International PR-600II | Users Manual - English - Page 77
EMBROIDERING TUTORIAL 60 - Brother International PR-600II | Users Manual - English - Page 78
such as sewing a pattern with seven or more colors, changing the needles and changing thread spools. Resume the Operation Being Performed Before the Machine Was Turned OFF......62 Changing the Needle 63 Replacing the needle / 63 Correctly Using the Embroidery Frames 65 Embroidery frame types - Brother International PR-600II | Users Manual - English - Page 79
continue the operation being performed before the machine was turned off. Turn on the embroidery machine. 1 ■ To select a pattern and start a new operation Touch . 3 When the screen shown below appears after 2 the initial screen, touch . X A message appears, asking if you wish to continue - Brother International PR-600II | Users Manual - English - Page 80
is broken, replace the needle with a new one. Use the included allen screw driver to replace the needle with one that is designed specifically for this machine and that passes the test described in "Checking the needle" (on page 15). Replacing the needle Turn off the embroidery machine. 1 • Do not - Brother International PR-600II | Users Manual - English - Page 81
set screw. Use the allen screw driver to turn the needle set screw clockwise. CAUTION ● Be sure to insert the needle all the way up until it touches the needle bar stopper and securely tighten the needle set screw with the allen screw driver, otherwise the needle may break or the machine may be - Brother International PR-600II | Users Manual - English - Page 82
Correctly Using the Embroidery Frames The various types of embroidery frames and their uses are described below. In addition to the included embroidery frames, the optional cap frame can be used with this embroidery machine. CAUTION ● Only use embroidery frames of the sizes indicated in the screen, - Brother International PR-600II | Users Manual - English - Page 83
the needle may bend or break or the pattern may become misaligned. Using a steam iron, affix the iron-on stabilizer 1 (backing) to the back of the fabric. 1 Note ● Use a piece of iron-on stabilizer (backing) that is larger than the embroidery frame. When framing the fabric in the embroidery frame - Brother International PR-600II | Users Manual - English - Page 84
taut, insert the inner frame at corner B. In the same way, lightly pull the fabric in the direction indicated by arrow C and insert corner C, and then 1 1 Disc-shaped screwdriver Memo ● To correctly frame the fabric in the embroidery frame, we recommend using a flat surface. Hooping the Fabric 67 - Brother International PR-600II | Users Manual - English - Page 85
OTHER BASIC PROCEDURES Using the embroidery sheet In order to hoop the fabric so that the pattern will be sewn in the correct position, use the guidelines on the embroidery sheet to accurately stretch the fabric in the frame. With a fabric marker, mark the area of the 1 fabric you want to - Brother International PR-600II | Users Manual - English - Page 86
fabric When embroidering pieces of fabric that are smaller than the embroidery frame, use spray fabric adhesive to attach the fabric to stabilizer (backing) hooped in the embroidery frame. With 1 fabrics where you do not wish to use spray adhesive, baste the fabric to the stabilizer (backing - Brother International PR-600II | Users Manual - English - Page 87
the embroidery machine determines that the cap frame (sold separately) is installed. A message indicating that the embroidery frame be replaced may appear even if no embroidery frame is installed. 70 2 1 Center of embroidery frame at the correct position 2 Needle position when the embroidery frame - Brother International PR-600II | Users Manual - English - Page 88
key again. If the pattern extends out of the embroidering area for the frame after the frame is moved, a message appears, indicating that the embroidery frame should be replaced. Either replace the embroidery frame or return to the pattern editing screen and adjust the pattern size or embroidering - Brother International PR-600II | Users Manual - English - Page 89
Position When the embroidery machine is purchased, it was adjusted so that the beginning of the stitching was from the center of the pattern. Therefore, move the frame and adjust the embroidering position so that the center of the pattern aligns with the needle drop point at the sewing position. In - Brother International PR-600II | Users Manual - English - Page 90
embroidery frame at the desired angle. In this case, adjust the angle of the pattern so that it is correctly positioned on the fabric. Touch . 1 • When specifying the starting of stitching, align the needle be checked 0 Touch this key to close this screen. Changing the Embroidering Position 73 - Brother International PR-600II | Users Manual - English - Page 91
embroidering area. to check the For more message appears. Memo ● With this operation, fine adjustments can be made to the angle; also, this operation is particularly useful when embroidering items, such as bags and tubular items, that have limitations to being hooped in the embroidery frame - Brother International PR-600II | Users Manual - English - Page 92
embroidering a pattern that uses seven or more thread colors, it is necessary to change the thread spools. When changing the thread spools, instruction to change the thread spools will appear with the machine automatically stopping. ■ Assignment of thread colors to needle bars Since the thread - Brother International PR-600II | Users Manual - English - Page 93
of times that the thread spools will need to be changed and the amount of time between changes. Touch 1 in the embroidering screen. Check the position of . 3 X The stitch navigating screen appears. Touch . 2 X Each time this key is touched, the next color in the thread color sequence - Brother International PR-600II | Users Manual - English - Page 94
changing the thread spools. Change thread spools message When it is necessary to replace the thread spool while embroidering a pattern that contains seven or more colors, the machine automatically stops sewing and the message shown below appears. This message also appears when it is necessary to - Brother International PR-600II | Users Manual - English - Page 95
through the machine. Cut the thread between the thread spool and 1 the thread guide. Pull out the old thread just after the needle 4 bar thread guide. Change the thread spool. 2 Continue pulling the thread until the knot is above the needle. Cut the knot. Use the automatic needle-threading - Brother International PR-600II | Users Manual - English - Page 96
the thread breaks or the bobbin thread runs out while embroidering, the machine will automatically stop. Since embroidery frame moves. Go back to the point where stitches have already been sewn. If the upper thread breaks Re-thread the upper thread. (Refer to 1 page 35.) Touch . 2 If the needle - Brother International PR-600II | Users Manual - English - Page 97
only with the upper 2 thread. Pull the trim end of the upper thread. • If the hook cover can be opened, replace the bobbin without removing the embroidery frame from the machine. • If the machine bed is hidden, for example, with a bag-shaped piece of fabric, or if the hook cover cannot be opened - Brother International PR-600II | Users Manual - English - Page 98
back or forward through the stitching since the embroidery frame moves at the same time. ■ To start sewing from the beginning Touch . 3 Press the start/stop button to stop the 1 machine. 3 • If necessary, change the fabric framed in the embroidery frame or trim and remove the sewn stitches - Brother International PR-600II | Users Manual - English - Page 99
at the top of the thread color sequence display is the color of the area currently selected. 0 Touch this key to close this screen. X The needle bar case moves and the current needle bar moves to the sewing position, and then the embroidery frame moves and current needle position is indicated. 82 - Brother International PR-600II | Users Manual - English - Page 100
going back or forward through the stitching since the embroidery frame moves at the same time. Set the main power switch to "I" to turn on 1 the machine. 3 When the screen shown below appears after 2 the initial screen, touch . X A message appears, asking if you wish to continue embroidering - Brother International PR-600II | Users Manual - English - Page 101
selection screen to select a new pattern. X The embroidering screen displayed before the machine was turned off appears. 1 Each touch of this key moves one stitch back through the stitching. • Check that the needle drop point is positioned where stitches have already been sewn. Touch . 6 Touch - Brother International PR-600II | Users Manual - English - Page 102
for each needle bar. Note ● Be sure to check the tension of the bobbin thread each time that the bobbin is changed. Depending on the bobbin thread type and whether a prewound bobbin is used, the tension of the bobbin thread may differ. For example, when replacing an empty prewound bobbin with one - Brother International PR-600II | Users Manual - English - Page 103
making the adjustments, try 4 embroidering with all needle bars to check the thread tension. Memo ● In the built-in embroidery patterns, one pattern is used for checking the thread tension. By sewing this pattern, the thread tension can easily be checked. For details, refer to page 160. ■ Upper - Brother International PR-600II | Users Manual - English - Page 104
Position Settings 89 Repeatedly sewing a pattern along a diagonal / 90 Maximum Sewing Speed Setting 91 Setting the Machine to Stop at Color Changes 92 Stopping the machine at the next color change / 92 Specifying pause locations before embroidering / 92 Temporary Needle Bar Setting 94 Reserved - Brother International PR-600II | Users Manual - English - Page 105
EMBROIDERING SETTINGS Automatic Lock Stitch Setting The machine can be set to automatically sew lock stitches, for example at the beginning of the pattern, before sewing each thread color change, and before trimming the thread. When the embroidery machine is purchased, this function is set ON. - Brother International PR-600II | Users Manual - English - Page 106
used to repeatedly sew a pattern along a diagonal. The starting/ending position settings are specified from the embroidering settings screen. When the embroidery machine is automatically set to the same position. X The embroidery frame moves to the starting position. ■ Specifying the ending - Brother International PR-600II | Users Manual - English - Page 107
EMBROIDERING SETTINGS Repeatedly sewing a pattern along a diagonal Example Sew the first embroidery pattern. 2 Touch to display the screen. 1 Starting position 2 Ending position After embroidering is finished, the machine 3 stops at the lower-left corner of the pattern. For the starting - Brother International PR-600II | Users Manual - English - Page 108
setting is specified from the embroidering settings screen or the embroidering screen. When the embroidery machine is purchased, the maximum sewing speed is set to 600 rpm (Cap frame for 400 rpm). Memo ● Decrease the sewing speed when embroidering on thin, thick or heavy fabrics. In addition, the - Brother International PR-600II | Users Manual - English - Page 109
editing screen or 1 the embroidering settings screen. After finishing sewing the area for the current 2 color, the next needle bar moves into position and the machine stops before sewing the next color. X changes back to . • If the machine is temporarily turned off, you will be asked if you - Brother International PR-600II | Users Manual - English - Page 110
, you will be asked if you wish to continue sewing or select a new pattern when the machine is turned on again. Touch to continue embroidering. (Refer to "Resume Embroidering After Turning OFF the Machine" on page 83.) Memo ● If the machine is temporarily turned off, the settings to stop the - Brother International PR-600II | Users Manual - English - Page 111
, the machine can be stopped at a color change and a different needle bar can be specified for the next color to be sewn. By substituting upper thread already threaded on a different needle bar, the time for sewing can be saved. For example, similar color thread can be substituted for temporary use - Brother International PR-600II | Users Manual - English - Page 112
when the same pattern is sewn the next time, the area is sewn with the original color. ● The thread color (needle bar) can be changed with this procedure even when the machine has been stopped with a specified pause or at the time of spool change. ● If the start/stop button was pressed - Brother International PR-600II | Users Manual - English - Page 113
color can be manually assigned to a certain needle bar. If a needle bar is specified, that needle bar is removed from the machine's automatic assignments and the specified color remains assigned to it. By specifically assigning often used thread colors to certain needle bars, the trouble of changing - Brother International PR-600II | Users Manual - English - Page 114
the new setting. Touch , , , , or for the 1 number of the needle bar whose setting you wish to cancel. 1 Indicates the number of the selected needle bar Touch . 2 4 1 The anchor disappears from the thread spool. X This cancels the manual needle bar setting. Reserved Needle Bar Settings 97 - Brother International PR-600II | Users Manual - English - Page 115
EMBROIDERING SETTINGS 98 - Brother International PR-600II | Users Manual - English - Page 116
patterns / 106 Appliqué alphabet / 107 Frame patterns / 108 Alphabet patterns / 109 Embroidery patterns stored in the machine / 111 Embroidery cards (optional) / 112 Computer (USB) / 114 USB media (Commercially Available) / 117 Editing the Embroidery Pattern (Pattern Editing Screen 119 - Brother International PR-600II | Users Manual - English - Page 117
than that created and saved in this machine. CAUTION ● While using embroidery data other than our original patterns, the thread or needle may break when sewing with a stitch density that is too fine or when sewing three or more overlapping stitches. In that case, use one of our original data design - Brother International PR-600II | Users Manual - English - Page 118
the upper and lower case letters, the numbers 0 through 9, the dash "-", and the underline "_". Do not use comma "," or period "." in the file name. • If embroidery data larger than 200 mm (H) × 300 mm (W) (approx. 7-7/8 inches (H) × 11-3/4 inches (W)) is selected, a message is shown at the - Brother International PR-600II | Users Manual - English - Page 119
the desired category. 1 Pattern type selection screen 1 Embroidery patterns 2 Frame patterns 3 Alphabet patterns 4 Renaissance alphabet patterns 5 Floral alphabet patterns 6 Appliqué alphabet patterns 7 Embroidery patterns stored in the machine 8 Embroidery cards 9 USB media 0 Computer (USB) In - Brother International PR-600II | Users Manual - English - Page 120
the setting either on or off. Vertical flip turned off Flipped vertically • If the key appears as , the pattern cannot be flipped vertically. 4 Checking the preview image • Touch this key to check that the embroidery will be sewn as desired. (For details, refer to page 27.) 5 Selecting an - Brother International PR-600II | Users Manual - English - Page 121
necessary, edit the pattern. 3 Touch . 1 X The list of embroidery patterns appears. Select an embroidery pattern. 2 Touch the desired pattern. 1 The pattern can be flipped horizontally. 2 The pattern can be flipped vertically. 3 Checks the preview image. Touch . 4 This confirms the pattern - Brother International PR-600II | Users Manual - English - Page 122
pattern. 3 X The list of renaissance alphabet patterns appears. Select an embroidery pattern. 2 Touch the desired pattern. 1 Touch this key to can be flipped horizontally. 3 The pattern can be flipped vertically. 4 Checks the preview image. Touch . 4 This confirms the pattern selection. X - Brother International PR-600II | Users Manual - English - Page 123
. 3 Touch . 1 X The list of floral alphabet patterns appears. Select an embroidery pattern. 2 Touch the desired pattern. 1 The pattern can be flipped horizontally. 2 The pattern can be flipped vertically. 3 Checks the preview image. Touch . 4 This confirms the pattern selection. X The - Brother International PR-600II | Users Manual - English - Page 124
. 3 Checks the preview image. Touch . 5 5 This confirms the pattern selection. X The pattern editing screen appears. Memo • For details on sewing appliqués, refer to "Sewing appliqué patterns" on page 156. 1 Touch this button to change the character size. Selecting an Embroidery Pattern 107 - Brother International PR-600II | Users Manual - English - Page 125
patterns appear in the lower half of the screen. Select a frame pattern. 3 Touch the desired pattern. 1 The pattern can be flipped horizonatally. 2 The pattern can be flipped vertically. 3 Checks the preview image. Touch . 5 This confirms the pattern selection. X The pattern editing screen - Brother International PR-600II | Users Manual - English - Page 126
or you wish to select a different character, touch to delete the last character selected, and then touch the key for the new character. Selecting an Embroidery Pattern 109 - Brother International PR-600II | Users Manual - English - Page 127
character entered, if necessary, 5 change the size of the character. • If the text is small and difficult to read on the screen, touch to check the text. 1 Touch this key to change the size. ■ Changing the size After selecting the first character, touch until the character is the desired size - Brother International PR-600II | Users Manual - English - Page 128
Embroidery patterns stored in the machine Embroidery patterns stored in the machine can be recalled. For details on storing a pattern, refer to "Saving Embroidery the curve (makes it more curved). • If the text is arranged using one of the text arrangements on this screen, even more 5 characters - Brother International PR-600II | Users Manual - English - Page 129
side marked with the arrow facing toward you, do not insert the card with extreme force, and do not insert any object other than embroidery cards into the slot, otherwise the machine may be damaged. ● If an embroidery card other than our original embroidery cards are used, the embroidery machine may - Brother International PR-600II | Users Manual - English - Page 130
before opening it. If the data is larger than 200 mm(H) × 300 mm(W) (7-7/8 inches (H) × 11-3/4 inches (W)) even after it is rotated 90 degrees, the following message appears. Selecting an Embroidery Pattern 113 - Brother International PR-600II | Users Manual - English - Page 131
SELECTING/EDITING/SAVING PATTERNS Computer (USB) Using the included USB cable, the embroidery machine can be connected to your computer, and the embroidery patterns saved on the computer can be temporarily recalled and used from the machine. Note Check that the computer to be connected meets the - Brother International PR-600II | Users Manual - English - Page 132
created, they will not appear in the machine's screen. ● While the machine is sewing, do not write data to or delete data from "Removable Disk". Touch . 2 Memo ● For details on large-size embroidery patterns, refer to PE-DESIGN instruction Manual. • To add a pattern from the computer, repeat - Brother International PR-600II | Users Manual - English - Page 133
". With Windows 98SE, check that the Access lamp is not flashing before disconnecting the USB cable from the computer and the machine. Note ● Be sure to perform the operation described above before disconnecting the USB cable from the computer and embroidery machine, otherwise the computer may - Brother International PR-600II | Users Manual - English - Page 134
. When connecting the USB Card Reader/Writer to the machine's USB Type "A" (host) port, be sure to secure the cable with the three hooks on the back panel. If the cable is not secured, the embroidery frame may catch on the cable while the frame is moving, causing the pattern to become misaligned - Brother International PR-600II | Users Manual - English - Page 135
level. 4 Shows the amount of available space in the USB media Select an embroidery pattern. 4 Touch the key for the desired pattern. • Press to return to ● To delete the USB media pattern data, delete it from the PR-600II. This will delete design data completely. X The selected pattern appears in - Brother International PR-600II | Users Manual - English - Page 136
as embroidery patterns, frame patterns, built-in alphabet patterns and patterns on embroidery cards, can easily be combined. Select an embroidery addition, combining cannot continue if there is no more free space in the machine's memory or if the maximum number of colors allowed (500 colors) is - Brother International PR-600II | Users Manual - English - Page 137
return the pattern to its position before it was moved (center of the embroidery frame), touch . 1 Red frame indicating the pattern to be edited Memo ● If multiple patterns appear in the arrow keys in the embroidering settings screen are used to move the frame to select the embroidering position. - Brother International PR-600II | Users Manual - English - Page 138
to its original size. 8 Moves the pattern in the direction of the arrow on the key. 9 Touch this key to close this screen. Editing the Embroidery Pattern (Pattern Editing Screen) 121 - Brother International PR-600II | Users Manual - English - Page 139
again. CAUTION ● After changing the size of the pattern, check the icons for the embroidery frames that can be used and use only the indicated frames. If a frame other than those indicated are used, the presser foot may hit the embroidery frame and cause injuries. X The screen shown below appears - Brother International PR-600II | Users Manual - English - Page 140
CAUTION ● After changing the angle of the pattern, check the icons for the embroidery 5 frames that can be used and use only the indicated frames. If a frame other than those indicated are used, the presser foot may hit the embroidery frame and cause injuries. 1 Arranges the text on a straight - Brother International PR-600II | Users Manual - English - Page 141
SELECTING/EDITING/SAVING PATTERNS If necessary, touch the arrow keys to adjust 4 the position of the pattern. For more details, refer to page 120. After making the desired changes, touch 5 . X The pattern editing screen appears again. Changing the character spacing The spacing between the - Brother International PR-600II | Users Manual - English - Page 142
between characters If the machine is set to trim Changing the thread density (only for some character and frame patterns) The thread density for some character and frame patterns can be changed. A setting between 80% and Less Standard More Editing the Embroidery Pattern (Pattern Editing Screen) 125 - Brother International PR-600II | Users Manual - English - Page 143
again. Specifying multi-color text The alphabet pattern characters selected on page 109 are set to black. The color of the characters can be changed using the change thread color key; however, to change the color of individual characters, touch the Multi Color key to turn it on, and then specify - Brother International PR-600II | Users Manual - English - Page 144
thread colors are registered in a color thread table and if you used the table for changing color, the thread spools can be assigned thread color changes. The top value shows the position in the sewing order for the color at the top of the thread color Embroidery Pattern (Pattern Editing Screen) 127 - Brother International PR-600II | Users Manual - English - Page 145
SELECTING/EDITING/SAVING PATTERNS Touch . 4 Deleting a pattern Touch . 1 X The color change is confirmed. • Make sure to touch to specify the new color, otherwise the thread color is not changed. • If the wrong thread color is specified or if you wish to change the thread color again - Brother International PR-600II | Users Manual - English - Page 146
used to move the pattern in the pattern editing screen or move the embroidery frame in the embroidering settings screen. Touching these keys moves the embroidery frame the embroidery frame to be moved. 3 Enables the embroidering area to be checked. 4 message appears. 1Touch to return to the - Brother International PR-600II | Users Manual - English - Page 147
repeating settings. The pattern returns to the arrangement before repeating was specified. 0 Moves the embroidery frame in the direction of the arrow on the key. A Enables the embroidering area to be checked. B Touch this key to close this screen. 1 Original pattern 2 Increases the spacing between - Brother International PR-600II | Users Manual - English - Page 148
4 the position of the embroidery frame. For more details, refer to page 72. If necessary, touch 5 embroidering area. to check the For more details, out of the embroidering area when it is repeated, the following error message appears. For details on changing the colors, refer to 2 page 127 - Brother International PR-600II | Users Manual - English - Page 149
then edit. Touch . 1 To select the pattern, touch . 3 Select . 2 X The pattern editing screen appears. Touch . 4 X This pattern will be positioned at the center of the embroidery area. X The pattern type selection screen appears again. Touch . 5 132 - Brother International PR-600II | Users Manual - English - Page 150
to display the lowercase letters input screen, and then touch "o", "o", then "d". Touch . 0 X The selected letters appear at the center of the embroidery area. • To change the size of the pattern, select "o", X The pattern type selection screen appears again. As before, touch . a and then - Brother International PR-600II | Users Manual - English - Page 151
then touch "u", "c" , then "k". Check the balance of the entire pattern, and, e if you wish to edit the pattern, touch and to select the pattern to be edited. X The selected letters appear at the center of the embroidery area. Example: To reduce size. Touch and f frame around . to move - Brother International PR-600II | Users Manual - English - Page 152
Touch . g After finishing all editing, touch . j Touch to reduce the pattern h proportionately. X The embroidering settings screen appears. • To return to the pattern editing screen and continue editing the pattern, touch . After reducing the pattern, touch to i return to the pattern - Brother International PR-600II | Users Manual - English - Page 153
Saving Embroidery Patterns Machine's Memory You can save embroidery patterns that you have customized and will use often pattern in the machine's memory. • See page 111 for information on retrieving a saved pattern. With the pattern that you want to save 1 displayed in the sewing screen, press . - Brother International PR-600II | Users Manual - English - Page 154
appears. To delete the data, press . 4 USB Media (Commercially Available) When sending embroidery patterns from the machine to USB media, plug the USB media into the machine's USB Type "A" (host) port. Depending on the type of USB media being used, either directly plug the USB device into the - Brother International PR-600II | Users Manual - English - Page 155
When connecting the USB Card Reader/Writer to the machine's USB Type "A" (host) port, be sure to secure the cable with the three hooks on the back panel. If the cable is not secured, the embroidery frame may catch on the cable while the frame is moving, causing the pattern to become misaligned - Brother International PR-600II | Users Manual - English - Page 156
page 21. Details on changing the basic embroidery machine settings and viewing operations on the LCD will be provided. Using the Settings Key 140 Understanding the settings 150 Specifying the remaining length of thread / 150 Using the Machine Operations Guide Key 151 Using the Help Key 153 - Brother International PR-600II | Users Manual - English - Page 157
has been used since its last maintenance. Use counters 3 and 4 as a standard for performing periodic maintenance and for receiving maintenance for the machine. 5 VERSION Shows the version of the software installed on this embroidery machine Note ● Check with your local authorized Brother dealer or - Brother International PR-600II | Users Manual - English - Page 158
setting is cancelled. For details on specifying these settings, refer to "Reserved Needle Bar Settings" on page 96. ■ Page 4 B CUSTOM THREAD TABLE F LANGUAGES Enables the display language to be changed. The keys and messages appear in the selected language. Details of each of the settings are - Brother International PR-600II | Users Manual - English - Page 159
ON: The buzzer sounds. OFF: The buzzer does not sound. When the embroidery machine is purchased, "ON" is selected. The buzzer setting can be specified from a malfunction. Be sure to sit in front of the display while using it. (Refer to "Adjusting the operation panel position" on page 9.) • Each - Brother International PR-600II | Users Manual - English - Page 160
CURSOR Displays or hides the needle cursor (green) and specifies the type of cursor. 4 How the guides will appear with the specified settings can be previewed here. ■ Size of the embroidery frame When the embroidery machine is purchased, the extra-large embroidery frame is selected. Touch and to - Brother International PR-600II | Users Manual - English - Page 161
embroidery frame Embroidering area of the large embroidery frame Embroidering area of the medium embroidery frame ■ Centerpoint marker and grid The centerpoint is indicated with a red plus sign (+). The spacing between the lines of the grid represent 10 mm (3/8 inches). When the embroidery machine - Brother International PR-600II | Users Manual - English - Page 162
Center Cursor The cursor indicates the current needle drop point in the embroidering screen. The center cursor appears in green. When the embroidery machine is purchased, "Display as plus sign (Name of Color) Thread color number (Embroidery) Thread color number (Country) Using the Settings Key 145 - Brother International PR-600II | Users Manual - English - Page 163
thread color sequence display and in the needle bar thread information can be displayed as machine, is displayed. Custom Thread 2 Custom Thread 2, specified with this machine, is displayed. For details on the color thread and the color displays, refer to page 163. When the embroidery machine - Brother International PR-600II | Users Manual - English - Page 164
that appears enlarged is the box that is selected. X Highlighting a color square moves in the direction of the arrow on the key that is touched. Using the Settings Key 147 - Brother International PR-600II | Users Manual - English - Page 165
BASIC SETTINGS AND HELP FEATURE Select the thread color number type. Touch . 3 5 Touch and until the desired thread color number type (brand name) appears. Type in the thread color number. 4 Touch , , , , , , , , and to type in the desired thread color number. X The entered color - Brother International PR-600II | Users Manual - English - Page 166
whether or not the thread is cut according to the specified number of jump codes. ON: The machine cuts the upper and bobbin thread before the jumpstitch. When Tajima embroidery data (.dst) is used, the machine converts the "jump" code to a trim code, based on the number specified on the next line - Brother International PR-600II | Users Manual - English - Page 167
patterns is used, the pitch may be too small, which may result in the thread or the needle breaking. In order to prevent this, the machine can be set to delete stitches with a fine pitch. Stitches with a pitch less than that specified here can be deleted. When the embroidery machine is purchased - Brother International PR-600II | Users Manual - English - Page 168
learn how to thread the upper thread Touch . 1 Operations Troubleshooting X The sewing machine help screen appears. Touch . 2 Maintenance X The list of basic operations appears. 6 Touch . 3 X The procedure for threading the upper thread appears. Using the Machine Operations Guide Key 151 - Brother International PR-600II | Users Manual - English - Page 169
HELP FEATURE Touch 4 to display the next page. After checking the procedure, touch . 5 1 Next page key procedure for • Threading the upper thread • Threading the needle • Replacing the embroidery frame holder • Attaching the cap frame. A movie showing the procedure can be viewed. When - Brother International PR-600II | Users Manual - English - Page 170
Using the Help Key If help is needed, touch (help key) to check an operation or to check the function of a key. ■ Example: Viewing help on the function keys in the pattern type selection screen After checking the desired key information, 3 touch . Touch 1 screen. in the pattern type - Brother International PR-600II | Users Manual - English - Page 171
BASIC SETTINGS AND HELP FEATURE 154 - Brother International PR-600II | Users Manual - English - Page 172
és (1) / 157 Using a frame pattern to create appliqués (2) / 158 Helpful Tips for the Operation of PR-600II 160 Checking the thread tension of built-in patterns / 160 Sewing a pattern aligned with a mark on the fabric / 161 Color thread table / 163 Colors of Tajima (.dst) embroidery data / 163 - Brother International PR-600II | Users Manual - English - Page 173
cleanly finished. In addition, carefully remove any excess threads. Frame the base fabric in the embroidery 4 frame, and then sew an "Appliqué Position" pattern. The appliqué position is sewn, and then the machine stops. ■ Procedure for sewing appliqués Place stabilizer on the back of the appliqu - Brother International PR-600II | Users Manual - English - Page 174
a frame pattern sewn with straight 1 stitches to embroider onto the fabric for the appliqué. Carefully cut outside of the stitching. • Depending on the pattern, an "Appliqué" pattern may not be available. In this case, sew the appliqué using thread in the color of a part of the embroidery. Finish - Brother International PR-600II | Users Manual - English - Page 175
the appliqué piece to the base fabric. Using a frame pattern to create appliqués (2) There is another way of sewing appliqués. With this method, there is no need to change the fabric in the embroidery frame. The appliqué can be created by sewing two frame patterns of the same size and shape-one - Brother International PR-600II | Users Manual - English - Page 176
pattern is changed, be sure to change the size or sewing position of the satin-stitched frame pattern in the same way. • Be sure to stop the machine before the cross at the center is sewn. Remove the embroidery frame from the 4 machine, and then cut off the excess appliqué fabric along the outside - Brother International PR-600II | Users Manual - English - Page 177
Operation of PR-600II This section provides descriptions to operations useful in the operation of this machine. Checking the thread tension of built-in patterns Touch . 3 One pattern on the last page of the embroidery patterns can be used to check the thread tension. We will sew this pattern - Brother International PR-600II | Users Manual - English - Page 178
embroidering settings Note ● If adjustment is necessary, refer to instructions on page 45 or 85/86. Set the beginning of stitching in the lower-left 2 corner. 7 X The frame moves so that the needle drop point aligns with the beginning of stitching. Helpful Tips for the Operation of PR-600II 161 - Brother International PR-600II | Users Manual - English - Page 179
mark this point on the 3 fabric. Remove the embroidery frame from the 6 machine, and then connect these two points to check the embroidery frame or adjust the position of the pattern. X The frame moves so that the needle drop point aligns with the beginning of stitching. With a fabric marker, mark - Brother International PR-600II | Users Manual - English - Page 180
is created by combining only shapes. For example, the following embroidery data appears as shown below in the Tajima format (.dst) In order for the parts of the pattern to be differentiated when Tajima data is used with this machine, the pattern is displayed with colors automatically applied in the - Brother International PR-600II | Users Manual - English - Page 181
must be appropriately stored if it is to sew properly. This is especially true when one considers the time that lapses between delivery to the thread user and the moment the thread is actually used on the embroidery machine. It is important that embroidery threads be stored in an environment that is - Brother International PR-600II | Users Manual - English - Page 182
but may stretch diagonally. DO NOT USE THESE TYPES. This type of backing will stretch during sewing and may cause the design to shift. faux fur are examples of materials that have a nap or pile that can actually penetrate embroidery stitches as your machine sews. The result is an unfinished and - Brother International PR-600II | Users Manual - English - Page 183
of it. Cap frames: These are specialized embroidery frames (hoops) designed to hold caps for embroidering. They are available in a variety of styles for various machines, with two basic styles: one that allows sewing a flattened cap (for use on a flat machine) or one that allows sewing the cap in - Brother International PR-600II | Users Manual - English - Page 184
frame, causing alignment problems, wrap inner frame frame burn. Cotton sheeting 1 tear-away None High-density or highly detailed designs may require more backing. If so, use two pieces of lightweight backing instead of one piece of heavy backing. Denim 1 tear-away None Reduce speed if needle - Brother International PR-600II | Users Manual - English - Page 185
in the same way that enclosed embroidery frames are attached. (Refer to page 30.) Note ● When using embroidery frames for industrial embroidery machines, THE MACHINE DOES NOT RECOGNIZE THE SEWING AREA OF THE FRAME. Be sure to use the trial sewing function to check that the pattern fits within the - Brother International PR-600II | Users Manual - English - Page 186
again if a different machine is being used. The height may differ depending on the machine that is used. For details, contact your sales representative. Note ● If the cap embroidery frame is attached, the embroidery frame indicators, showing which embroidery frames can be used, appear as shown - Brother International PR-600II | Users Manual - English - Page 187
PR-600II, we recommend that the following types of caps be embroidered. ■ Standard(Pro Style) Face: Pro style 6 sections ■ Golf Style Face: Not divided 5 sections Otto International, Inc. cap model number (Example) Mesh backing on the back of front panels (soft or hard) Ease of framing (hooping - Brother International PR-600II | Users Manual - English - Page 188
to use the cap frame ■ Installing the cap frame driver Press → → →→ in order to view a video of the operation on the LCD (see page 151). Remove the embroidery frame holder from the carriage on the machine, and then install the cap frame driver. Before removing the embroidery frame holder - Brother International PR-600II | Users Manual - English - Page 189
of 5 the carriage into the holes in the mounting plate of the cap frame driver. 1 1 1 Machine bed Note ● Be careful that the cap frame driver does not hit any nearby parts, such as the presser foot. Attach the cap frame driver to the carriage as described below in steps 4 through 6. Insert the two - Brother International PR-600II | Users Manual - English - Page 190
screwdriver (medium). Firmly tighten the screws. 1 L-shaped bracket 2 Ring Memo ● If the same machine is being used, the adjustment to the cap frame driver is only required the first time that the machine is used. Turn on the machine. After the carriage 1 moves to its initial position, turn off the - Brother International PR-600II | Users Manual - English - Page 191
bed and 5 the ring of the cap frame driver. ■ Installing the needle plate spacer Attach the needle plate spacer to the needle plate. 1 1 Pad 2 Machine bed 3 Ring of the cap frame driver Lightly press down the ring, and then use the 6 Allen screwdriver (large) to tighten the four hexagonal screws - Brother International PR-600II | Users Manual - English - Page 192
2 • Make sure that the stopper is firmly secured. Check that there is no looseness. 5 If there is looseness, (Pro style) Note ● Either the standard type cap frame or the advanced type cap frame can be used in the standard position. Only the advanced cap frame can be used in the low profile position - Brother International PR-600II | Users Manual - English - Page 193
standard type Using a Phillips screwdriver, turn the four screws (two on the left and two on the right) at the inside of the mounting jig one turn to loosen them. Attaching the standard cap frame to the mounting jig and putting a cap into the frame Press → → →→ in order to view a video of the - Brother International PR-600II | Users Manual - English - Page 194
of 4 the cap, and then place the cap in the standard cap frame. Using both hands, hold both sides of the cap, and then align the edge of the lower frame with the base of the brim. 1 1 Snap lock released 2 Clamping frame opened 3 Brim presser Placing a sheet of stabilizer. 3 Placing a sheet of about - Brother International PR-600II | Users Manual - English - Page 195
of the cap, loosen the screw 4 and adjust the position of the clamping frame 3 so that the teeth on the inside of the clamping frame 1 align with the base of cap brim 2. 1 Catch of the snap lock 2 Clamping frame Check for the following conditions. 1 The centerline of the cap is parallel with the - Brother International PR-600II | Users Manual - English - Page 196
securely close it. As shown in the illustration, use both hands to 0 press in on the sides brim folded out, the brim will hit the machine and cause the pattern to become misaligned. 1 1 sides of the brim, the fabric within the cap frame may be pressed, causing slack in the fabric. Pull - Brother International PR-600II | Users Manual - English - Page 197
the machine. Attach the advanced cap frame to the 1 mounting jig. Align the side of the mounting jig with the brace on the cap frame, and then push the cap frame into place. 3 4 5 6 1 2 1 Side of mounting jig 2 Brace on cap frame • Align the notch in the advanced cap frame with the guiding - Brother International PR-600II | Users Manual - English - Page 198
sweat guard on the inside of 4 the cap, and then place the cap in the 2 advanced cap frame. Using both hands, hold both sides of the cap, and then align the edge of the lower frame 1 Centerline of cap 2 Notch in mounting jig with the base of the brim. Place the sweat guard - Brother International PR-600II | Users Manual - English - Page 199
so that the brim of 7 the cap passes between the inside clamping frame and the outside clamping frame. 1 3 2 Note ● Loosen the two screws for the outside clamping frame, and then adjust the position of the outside clamping frame so that it conforms to the shape of the cap and so that the teeth - Brother International PR-600II | Users Manual - English - Page 200
any slack. Use the clips to secure the cap. b 1 X This completes the positioning of the cap in the advanced cap frame. Remove the advanced cap frame from the e mounting jig. Press both right and left holders on the mounting jig with both thumbs, and then pull off the embroidery frame, as shown - Brother International PR-600II | Users Manual - English - Page 201
not hit the embroidery machine. • Be careful that the cap frame does not hit any nearby parts, such as the presser foot. ■ For the standard cap frame Release the snap lock on the cap frame, and 2 then remove the cap. 3 2 1 Guiding Plate on cap frame driver 2 Notch on cap frame 3 Holder 1 X The - Brother International PR-600II | Users Manual - English - Page 202
2 Snap lock 3 Clips Installing the embroidery frame holder After embroidering using the cap embroidery frame is finished, remove the needle plate spacer and cap frame driver, and then re-attach the embroidery frame holder. Remove the needle plate spacer. 1 1 Needle plate spacer Loosen the two lower - Brother International PR-600II | Users Manual - English - Page 203
problems (misalignment of gaps in the pattern). Sew underlay stitches. 1 1 Pins in the frame-mounting plate 2 Holes on the embroidery frame holder Secure the embroidery frame holder with the two 7 thumb screws. Start the embroidery pattern from the center, 2 and sew toward the ends. With PR-600II - Brother International PR-600II | Users Manual - English - Page 204
When sewing outlines of patterns, make sure 3 that the stitch width of the satin stitching is at outlining on each region or letter. 1 At least 1 mm 2 At least 2 mm CAUTION ● Don't sew more than four overlapping layers. 7 1 Specify that overlapping areas not be sewn. Using the Optional Cap Frame 187 - Brother International PR-600II | Users Manual - English - Page 205
. ● Only use the bobbins supplied with this bobbin winder. Optional bobbin winder and its accessories Check that the following bobbin winder and accessories are enclosed. 1. 32 2. 3. 4. 4 5 5. 1 9. 1 Main power switch 2 Bobbin winder shaft 6. 7. 8. 3 Hole for thread guide 4 Hole for - Brother International PR-600II | Users Manual - English - Page 206
adapter, be sure that the unit is not operating. ● After using the bobbin winder, 7 disconnect it from the electrical outlet. 3 1 Pins on thread guide 2 Notches on hole for thread guide 3 Hole for thread guide • Firmly insert the thread guide as far as possible and make sure that it is secure - Brother International PR-600II | Users Manual - English - Page 207
spool directly onto the spool pin. Also use the included spool cap to keep the small spool stable. Pass the thread through the hole in the left of 3 the thread guide toward the front of the winder. 1 Align the groove in the bobbin with the spring 1 on the bobbin winder shaft, and set the - Brother International PR-600II | Users Manual - English - Page 208
of 5 the thread guide toward the back of the machine. 1 Note ● Be sure to follow the procedure described. If the bobbin is wound without the thread being cut with the cutter, when the bobbin thread runs low, the thread may become tangled around the bobbin and cause the needle to break. Slide the - Brother International PR-600II | Users Manual - English - Page 209
sure to check the tension of the bobbin thread and adjust the tension if necessary. For a metal bobbin, use both weights, large (L) and small (S). For detailed instructions on how to adjust the bobbin tension, refer to page 85. Pull the thread through the guide slit in the b bobbin winder seat to - Brother International PR-600II | Users Manual - English - Page 210
for better performance from Hook race area. Use the included cleaning brush. Turn off the embroidery machine. 1 CAUTION ● Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur. Open the hook cover, and remove the bobbin 2 case. (Refer to page 18 - Brother International PR-600II | Users Manual - English - Page 211
sure to clean around the needle plate once a month. Use on offset screwdriver and the included cleaning brush. Turn off the embroidery machine. 1 CAUTION ● If the hook is scratched or damaged, consult your authorized dealer. After cleaning is finished, insert the bobbin 4 case into the hook, and - Brother International PR-600II | Users Manual - English - Page 212
each time when the bobbin is changed. Use a piece of paper with the thickness of a business card. Open the hook cover, remove the bobbin 1 case, and then remove the bobbin. (Refer to page 18.) 1 1 Remove all lint in this area After cleaning is finished, attach the needle 4 plate in the opposite - Brother International PR-600II | Users Manual - English - Page 213
, and put a drop of oil to the lower needle bar felt washer every 40 to 50 hours of machine use. ■ Oiling the race Turn off the embroidery machine. 1 After cleaning is finished, insert the bobbin 4 into the bobbin case and the bobbin case into the hook, and then close the hook cover. (Refer to page - Brother International PR-600II | Users Manual - English - Page 214
of oil onto the hook once a day before use. ● Apply one drop of oil on the lower needle bar felt washer every 40 - 50 hours of sewing time. ● Apply only sewing machine oil. Use of any other type of oil may result in damage to the embroidery machine. ● Do not apply too much oil. Fabric or - Brother International PR-600II | Users Manual - English - Page 215
On-screen troubleshooting This embroidery machine is equipped with an easyto-use troubleshooting feature for problems during sewing. Touch the key that shows the problem, and then check for the causes that are displayed. Touch . 1 Check the items that are displayed. 4 After checking the desired - Brother International PR-600II | Users Manual - English - Page 216
Troubleshooting If the machine does not operate correctly, check for the following points/issues before requesting service. If the suggested remedy does not correct the problem, contact your authorized dealer. Symptom The embroidery machine does not operate. Probable Cause The machine is not - Brother International PR-600II | Users Manual - English - Page 217
tension is set too high. It does not run. A bobbin designed specifically for this machine is not used. The needle and the hook are not correctly passing each other. There is backlash play (forward/ backward) in the needle bar case. The thread density of the embroidery data is too fine. Three or more - Brother International PR-600II | Users Manual - English - Page 218
. The area around the embroidery foot hole is damaged. Consult your nearest authorized dealer. Replace the presser foot. 1 Consult your nearest authorized dealer. 7 1 Scratches/Burrs Using a weak thread like a metallic thread. Slow down the machine sewing speed. p.91 Troubleshooting 201 - Brother International PR-600II | Users Manual - English - Page 219
designed specifically for this machine is not used. Make sure thread passes completely under upper and middle thread guide. Remove any knots or tangles. Decrease the upper thread tension. Adjust the lower thread tension. Replace the bobbin case with a new one. Check that the bobbin is wound so that - Brother International PR-600II | Users Manual - English - Page 220
Replace the bobbin. Replace the bobbin case. Remove the thread jammed and clean the hook. p.18 p.18 p.193 A bobbin designed specifically for this machine is not used. Use the correct bobbin. p.15 The upper thread is not threaded Thread the upper thread correctly. correctly. p.35 The needle - Brother International PR-600II | Users Manual - English - Page 221
carriage was moved while replacing bobbin thread, changing needle, or working near embroidery frame. Be careful when removing and reattaching the embroidery frame while replacing bobbin thread, changing needle, or working near embroidery frame. If the carriage is moved, turn the machine off, then on - Brother International PR-600II | Users Manual - English - Page 222
bar to be position. threaded into embroidering p.40 position. The needle threader cannot be used. Recommended needles are not used on this machine. The needle is not installed correctly. Replace and use recommended needle. Correctly install the needle. p.15, 63 p.15, 63 The hook on the - Brother International PR-600II | Users Manual - English - Page 223
after the machine is rethreaded, the sensor may be damaged. Consult your nearest authorized dealer. Replace the needle. Dull needles have a difficult time passing through the garment, causing fabrics to tear. The simple penetration of the needle could damage delicate fabrics. Use stabilizer on - Brother International PR-600II | Users Manual - English - Page 224
used, and then install a larger embroidery frame. (Refer to page 28.) There are too many characters to be arranged on the curve. Reduce the number of characters. The upper thread was cut or the thread came out the thread tension disc or a thread guide. The machine is not threaded correctly. Check - Brother International PR-600II | Users Manual - English - Page 225
APPENDIX Sewing cannot begin from the specified starting position. Change the starting position or move the frame and change the embroidering position. (Refer to page 89.) The needle has stopped at an incorrect position. Turn the handwheel so that the mark on the handwheel is at the top. More - Brother International PR-600II | Users Manual - English - Page 226
save the data. Try to use a different media. The machine was stopped while the needle bar case was moving. Touch to automatically reset the needle bar case. The pattern is larger than the embroidering area of the installed embroidery frame. Use an embroidery frame with an embroidering area that - Brother International PR-600II | Users Manual - English - Page 227
data cannot be detected. The embroidery data may be damaged. USB media error Touch , and try again. Or the USB media may be damaged. USB media is not connected to the machine. Connect a USB media. During data transfer, the USB cable was disconnected. Do not disconnect the USB cable while - Brother International PR-600II | Users Manual - English - Page 228
If any of the following messages appear, consult your nearest authorized dealer. 7 Troubleshooting 211 - Brother International PR-600II | Users Manual - English - Page 229
APPENDIX 212 - Brother International PR-600II | Users Manual - English - Page 230
as described below. Touch anywhere inside the touch panel, and 1 turn the machine off, then on again. • Continue touching the touch panel until the screen shown , turn 3 the machine off, then on again. Press the thread trimming button. 2 7 X The adjustments screen appears. Troubleshooting 213 - Brother International PR-600II | Users Manual - English - Page 231
from 1 to 5. CAUTION ● Be sure to use the included touch pen to adjust the touch panel. Do not use a mechanical pencil, screwdriver or any other hard or from 1 to 5. After making the necessary touch panel 5 adjustment, turn the machine off, and on again. Note ● If the keys still do not respond, even - Brother International PR-600II | Users Manual - English - Page 232
Specifications Embroidery machine specifications Item Weight Machine size Sewing speed Hook Type Hook size Needle Number of needle Thread tension Cap sewing Tubular sewing Thread trimming Thread breakage sensor Automatic needle threader Communication with PC Data storage Specification 37 kg (81 - Brother International PR-600II | Users Manual - English - Page 233
125 thread spools 77 216 units of measurements 143 Checking needle bars and thread colors 33 preview image 27 thread spool changes 75 thread tension 45 Cleaning around the needle plate 194 bobbin case 195 hook 193 LCD 193 machine surface 193 Color information 145 Color thread table 163 - Brother International PR-600II | Users Manual - English - Page 234
, 141 Low Profile (Low fitting 170 Retrieving Lower thread guide 2 from Computer (USB 114 from Embroidery cards 112 M Machine operations guide key 49, 151 Main power switch 3, 20, 47 Maintenance 151, 193 Manual needle bar settings 96 Maximum sewing speed key 55, 56 Merge key 53 from - Brother International PR-600II | Users Manual - English - Page 235
up 6 Settings key 49, 140 Sewing appliqu 156 pattern aligned with a mark on the fabric 161 Sewing key 55 Sewing light 2 Sewing order 56 Sewing speed 91 Sewing the embroidery 42 Sewing time 56 Short stitch delete 140, 150 Silk 167 Six-needle machine viii Size (horizontal 51, 52 Size - Brother International PR-600II | Users Manual - English - Page 236
7 Index 219 - Brother International PR-600II | Users Manual - English - Page 237
English 884-T03 XD1133-0511 0512 Printed in Taiwan
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
 |
 |
EMBROIDERY MACHINE
PR-600
OPERATION MANUAL