Brother International PR680W Operation Manual

Brother International PR680W Manual

Get Brother International PR680W PDF manuals and user guides View all Brother International PR680W manuals
Add to My Manuals
Save this manual to your list of manuals

Brother International PR680W manual content summary:

  • Brother International PR680W | Operation Manual - Page 1
    Operation Manual Embroidery Machine Product Code: 884-T23 Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference.
  • Brother International PR680W | Operation Manual - Page 2
  • Brother International PR680W | Operation Manual - Page 3
    Please read these safety instructions before attempting to use the machine. DANGER - To reduce the risk of electric shock 1 Always unplug the machine from the electrical outlet immediately after using, when cleaning, when making any user servicing adjustments mentioned in this manual, or if you are
  • Brother International PR680W | Operation Manual - Page 4
    occurs or adjustment is required, first follow the troubleshooting table in the back of the Operation Manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother dealer. Use this machine only for its intended use as described in the
  • Brother International PR680W | Operation Manual - Page 5
    of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand (908) 704-1700 declares that the product Product Name: Brother Embroidery Machine Model Number: PR680W This device complies with Part 15 of the FCC Rules.
  • Brother International PR680W | Operation Manual - Page 6
    2014/53/ EU. The Declaration of Conformity (DoC) can be downloaded from Brother support website. Visit support.brother.com Wireless LAN (Models with Wireless LAN function only) This machine supports wireless interface. Frequency band(s): 2400-2483.5 MHz Maximum radio-frequency power transmitted in
  • Brother International PR680W | Operation Manual - Page 7
    machine is certified as a Class 1 laser product under the U.S. Department of Health and Human Services machine indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States. Brother Industries manual may result in hazardous radiation exposure. 5
  • Brother International PR680W | Operation Manual - Page 8
    BROTHER retains ownership of all rights to CONTENT and to the copies of the CONTENT included in this package. The CONTENT are licensed (not sold) to you ("CUSTOMER") under the terms and conditions of this Agreement. CUSTOMER is licensed to: • Use the CONTENT in combination with an embroidery machine
  • Brother International PR680W | Operation Manual - Page 9
    machine. Be sure to observe the precautions described in the labels. Label locations TRADEMARKS IBM is a registered trademark or a trademark of International Business Machines go to the manual download section on your model's home page of Brother support website at http://s.brother/cpban/ .
  • Brother International PR680W | Operation Manual - Page 10
    transporting precautions 16 Setup location 17 Setting up the machine 18 Adjusting the operation panel position 18 Preparing the thread guide assembly 19 Preparing the spool stand 20 Attaching the embroidery frame holder 21 TURNING ON THE MACHINE 22 LCD SCREEN 24 Using the settings key 25
  • Brother International PR680W | Operation Manual - Page 11
    MACHINE (LINK FUNCTION 117 Operations available with the Link function 117 Embroidering using the Link function 117 Disabling the Link function 120 EMBROIDERY 139 Replacing the needle 140 Oiling the machine 142 About the maintenance message 143 TROUBLESHOOTING 144 List of Symptoms 144 Error
  • Brother International PR680W | Operation Manual - Page 12
    10
  • Brother International PR680W | Operation Manual - Page 13
    to the left and right to move the needle to the embroidering position. 3 Lower thread guide 4 Carriage Attach the embroidery frame to the carriage. When the machine is turned on or when the machine is embroidering, the carriage moves forward, backward, left and right. 5 Hook cover/Hook (page 35
  • Brother International PR680W | Operation Manual - Page 14
    are included. If any item is missing or damaged, contact your authorized Brother dealer. Part Name Part Code 1. Accessory case XC6482-051 2. Needle set 10. Needle plate cover XC6499-151 11. Spacer (on machine) XF1978-001 12. Phillips screwdriver XC6543-051 13. Standard screwdriver
  • Brother International PR680W | Operation Manual - Page 15
    XF2223-001 XC7134-051 33. Operation Manual 21. Spool cap × 6 This manual 130012-057 34. Quick Reference Guide 22. USB cable Visit your authorized Brother dealer. XD1851-051 35. Embroidery Design Guide Visit your authorized Brother dealer. 23. Embroidery frame (extra-large) 300 mm
  • Brother International PR680W | Operation Manual - Page 16
    set 6. PRCF3 (Americas) PRCF3: XE2158-201 (Europe) PRCF3CN: 115D02E6002 (China) PRCF3: 115D02E7002 (other areas) 2. Embroidery Design Guide 7. (additional) Visit your authorized Brother dealer. 3. Bobbin winder set (Refer to page 123.) 8. PRBW1 9. Optional accessories The following are
  • Brother International PR680W | Operation Manual - Page 17
    : 115D02E700A (other areas) PRPRF160: XG6741-001 (Europe) PRPRF160CN: 115D02E6028 (China) 31. Sleeve frame PRPRF160: 115D02E7028 (other areas) 23. Embroidery frame holder C (with dark gray corner covers) PRPARMC (Americas) PRPARMC: XG6743-001 (Europe) PRPARMC: 115D02E7021 (other areas) 70
  • Brother International PR680W | Operation Manual - Page 18
    bobbin 100376-051 34. Weight (S) XC6631-051 Note • Visit your nearest authorized Brother dealer for a complete listing of optional accessories for your machine. Memo • Always use accessories recommended for this machine. • All specifications are correct at the time of printing. Please be aware
  • Brother International PR680W | Operation Manual - Page 19
    . • Place no objects within the moving range of the embroidery frame. • Set-up machine near an electrical outlet. • Use a level and stable surface, such as a desk or stand. • Use a surface that can support the weight of the machine (about 38 kg (83 lb)). • Allow open space around the ventilation
  • Brother International PR680W | Operation Manual - Page 20
    thumb screws. Adjust the operation panel to an easy-to-operate b position, and then tighten the thumb screws. Press down on each corner of the machine to check f that it is stable. If it is still unstable, perform steps c through e again to adjust the legs. Adjust the orientation of the operation
  • Brother International PR680W | Operation Manual - Page 21
    assembly Using the included Phillips screwdriver, loosen the two a screws on the left side of the thread guide assembly support so that the thread guide assembly can be raised. 1 Insert screw and tighten. 2 Tighten screw. Using the Phillips screwdriver, loosen the screws on c the left and right
  • Brother International PR680W | Operation Manual - Page 22
    the screws are not loosened enough, it may not be easy to move the thread guide assembly support and the thread guide. Do not apply extreme force when moving the thread guide assembly support and the thread guide. Be sure that the screws are loosened well enough before moving these parts. • Be sure
  • Brother International PR680W | Operation Manual - Page 23
    c the pins on the frame-mounting plate of the carriage. 1 Thumb screws Note • Two types of embroidery frame holders are included with this machine. Embroidery frame holder A is used with the four included embroidery frames. (page 67) • Refer to page 68 for hoops used with frame holder B and other
  • Brother International PR680W | Operation Manual - Page 24
    result. If the power supply cord or its plug is damaged, stop using the machine, and then take the machine to your authorized Brother dealer for repairs before continuing use.  The LCD screen comes on. When the machine is turned on, the opening movie is c played. Touch anywhere on the screen to
  • Brother International PR680W | Operation Manual - Page 25
    Follow the procedure below when the settings screen appears automatically. Touch and to set your local language and then a touch . Touch c to start using your machine.  The clock starts from 0 second of the time you set. Memo • The time/date you set may be cleared if you don't turn on the
  • Brother International PR680W | Operation Manual - Page 26
    from the machine settings screen. 4 Change the machine 25 settings. Settings key 5 Check a machine 29 operation. Machine operations guide key 6 Needle bar/ Frame move key Move or thread a selected needle bar, to position the carriage, or to oil the machine so the embroidery frame can
  • Brother International PR680W | Operation Manual - Page 27
    (light, volume, speaker volume, opening display etc.). To display the different settings screens, touch for "Embroidery settings", for "General settings", or for "Wireless LAN settings". Memo • The machine default setting is highlighted. • Touch or to display the previous or next page
  • Brother International PR680W | Operation Manual - Page 28
    not displayed ([OFF]) when the machine is turned on. 2 Select settings for the [Eco Mode] and [Shutoff Support Mode]. (page 28) 3 F Select in which screen on the machine the embroidery pattern from the computer is received in Link mode. (page 117) G Set the [Manual Color Sequence] [ON] or [OFF
  • Brother International PR680W | Operation Manual - Page 29
    the wireless LAN function. (page 31) 2 Shows the connected SSID. 3 Set the machine to connect the wireless LAN function. (page 31) 4 Shows the machine name used on the wireless LAN function. 5 Change the machine name used on the wireless network. 6 Check the wireless LAN status. 7 Display other
  • Brother International PR680W | Operation Manual - Page 30
    off and then back on to restart operating. Note • If you turn off the machine while the machine is in the [Eco Mode] or the [Shutoff Support Mode], wait for about 5 seconds before turning on the machine again. ■ Changing the screen saver image You can select your own personal images for the
  • Brother International PR680W | Operation Manual - Page 31
    Touch to resume paused video playback. 4 Display the link information to Brother support website. 5 Display the introduction to the application. 6 Display the Terms of Use for this machine. ■ Using the operation guide function Touch to display the screen shown below. Categories are displayed at
  • Brother International PR680W | Operation Manual - Page 32
    . (page 158) • Wirelessly transfer an embroidery pattern from your computer to the machine by using the dedicated Windows application (Design Database Transfer). The application can be downloaded from the following URL. http://s.brother/cabkb/ * Settings must be specified in Design Database Transfer
  • Brother International PR680W | Operation Manual - Page 33
    software (PEDESIGN version 11 or later) on a computer. Also, transfer to PE-DESIGN an embroidery pattern edited on the machine. * Settings must be specified in PE-DESIGN. For more information, refer to the manual for PE-DESIGN. GETTING READY Set [Wireless LAN Enable] to [ON]. b 1 • Using the
  • Brother International PR680W | Operation Manual - Page 34
    is not displayed, specify it as described below. 1 Touch . 2 Enter the desired SSID, and then touch . 3 Select the authentication method and encryption mode. • If the machine had already been connected to the network, touch SSID. , and then select the saved 32
  • Brother International PR680W | Operation Manual - Page 35
    2 3 1 TCP/IP settings can be manually entered. 2 Shows the MAC address. 3 Use the following web site for support information on the app. http://s.brother/cpban/ ■ Monitoring Memo • instructions that appear in the app to d connect the app to your machine. * Select the name that appears beside [Machine
  • Brother International PR680W | Operation Manual - Page 36
    34
  • Brother International PR680W | Operation Manual - Page 37
    /Stop" button to start 11 embroidering. (Once embroidering is completed, the 82 machine automatically stops.) 12 Remove the embroidery frame. 86 13 Turn off the machine. 23 INSTALLING THE BOBBIN When the machine is purchased, only the bobbin case is installed in the hook. Insert a bobbin
  • Brother International PR680W | Operation Manual - Page 38
    machine After removing the bobbin case, apply oil to the machine. You need to apply oil onto the race hook. For details on oiling the machine, refer to "Oiling the machine with the thread winding off in the opposite direction, the embroidery will not be stitched correctly. Pass the thread through the
  • Brother International PR680W | Operation Manual - Page 39
    page 39) 3 Monogram and frame patterns (page 40) 4 Character patterns (page 41) 5 Utility embroidery patterns/Large buttonhole patterns (page 39) 6 Decorative alphabet patterns (page 43) 7 Patterns stored in the machine's memory (page 116) 8 Patterns saved on USB media (page 116) 9 Patterns saved on
  • Brother International PR680W | Operation Manual - Page 40
    . This takes you to the embroidering screen (illustrated in k). Hoop the stabilizer and fabric in the embroidery f frame. (page 63) Attach the embroidery frame to the machine. (page 66) g Touch . h  The embroidering settings screen appears. Edit the entire pattern. (page 70) i  The list
  • Brother International PR680W | Operation Manual - Page 41
    selected pattern appears in the pattern display area. Touch . d  The pattern editing screen appears. Follow the procedure from step e to l of e "Embroidery patterns" on page 38.  The list of patterns of the selected category appears. Select a pattern. c  The selected pattern appears in the
  • Brother International PR680W | Operation Manual - Page 42
    Monogram and frame designs Monogram designs can be created by combining two or three letters. Touch . a Touch the button for the desired character style. b 1 2 3 4 1 2 3  The selected characters appear in the text preview area and the pattern display area. 2 1 3 4  The text input screen
  • Brother International PR680W | Operation Manual - Page 43
    frame patterns appears. Touch the desired pattern. i Touch . d  The pattern editing screen appears. Follow the procedure from step e to l of e "Embroidery patterns" on page 38.  The selected frame pattern appears in the pattern display area. Touch . j  The pattern editing screen appears
  • Brother International PR680W | Operation Manual - Page 44
    ■ Character pattern input keys Memo • If a key display is grayed out, you cannot use that function with the selected pattern. C B A 0 9 8 1 23456 7 Display No. Key Name 4 Character spacing key Function Change the spacing of the character patterns. • : Increase the character spacing. • :
  • Brother International PR680W | Operation Manual - Page 45
    text key Switch between text written vertically and horizontally. (Japanese font only) E Shortcut to the embroidering screen. Shortcut key BASIC EMBROIDERY Touch the desired pattern. c 1 1 Flip the pattern horizontally, if desired.  The selected pattern appears in the pattern display area
  • Brother International PR680W | Operation Manual - Page 46
    with your finger or touch pen. Touch . c Select and enter "LOVE". d  The characters you enter will be displayed in the center of the embroidery pattern area. Touch . e Use to move the characters. f * Characters can also be moved by directly dragging them with your finger or the touch
  • Brother International PR680W | Operation Manual - Page 47
    BASIC EMBROIDERY Select the multiple patterns by dragging your finger in b the screen to create a box around the desired patterns. ■ Grouping multiple selected patterns If the multiple
  • Brother International PR680W | Operation Manual - Page 48
    pattern consists of multiple patterns that have been combined, the size will include all patterns. Shows the sizes of embroidery frames that can 2 Embroidery be used to embroider the 63 frame pattern currently displayed indicators in the pattern display area. Display No. Key Name
  • Brother International PR680W | Operation Manual - Page 49
    thread color pattern. 55 key Make and edit the repeated Border key pattern. 51 BASIC EMBROIDERY Display No. Key Name Function Arrange multiple patterns on Alignment key a line. Embroidery appliqué key Change the pattern being edited into an appliqué pattern. Page 51 95 Edit characters
  • Brother International PR680W | Operation Manual - Page 50
    44 Positioning arrow. keys • : Move to the center of the embroidering area. Selects the pattern that is being edited when the Pattern embroidery pattern consists 44 A selection keys of multiple patterns that have been combined. Multiple Choose multiple patterns to be edited at the same
  • Brother International PR680W | Operation Manual - Page 51
    BASIC EMBROIDERY Changing the size and the density of the pattern There are two methods to change the pattern size. If is selected, you can change the pattern size while maintaining the thread density. The machine recalculates the number of stitches automatically. With this function, the
  • Brother International PR680W | Operation Manual - Page 52
    Combining the separated character patterns Two separated lines of character patterns can be combined. The characters can be aligned to the specified order. You cannot combine the lines of character patterns if the text contains a line feed using the Line Feed function. Touch . a Changing the
  • Brother International PR680W | Operation Manual - Page 53
    patterns Select patterns that you want to align. (page 44) a BASIC EMBROIDERY Designing repeated patterns Using the border function, you can create an arrangement using repeated patterns. Select the pattern that you want to repeat and touch a .
  • Brother International PR680W | Operation Manual - Page 54
    Adjust the spacing of the repeated pattern. e • To widen spacing, touch . • To tighten spacing, touch . ■ Repeating one element of a repeated pattern By using the Cut function, you can select one element of a repeated pattern and repeat only that single element. This function allows you to design
  • Brother International PR680W | Operation Manual - Page 55
    pattern to be edited" on page 44. ■ Assigning thread marks By embroidering thread marks, you can easily align patterns when embroidering a series. When embroidery is finished on a pattern, a thread mark in the shape of an arrow will be embroidered using the final thread. When embroidering a series
  • Brother International PR680W | Operation Manual - Page 56
    magnetic sash frame, the fabric can be easily rehooped without removing the frame from the machine. For details, refer to the manual included with magnetic sash frame. Rehoop the fabric in the embroidery frame. e Note • Adjust the position of the fabric so that the embroidering area for the
  • Brother International PR680W | Operation Manual - Page 57
    Remove the thread mark. l Touch . m Touch , and then press the "Start/Stop" n button to start embroidering. BASIC EMBROIDERY EDITING COLORS Specifying multi-color text The alphabet pattern characters selected on page 41 are set to black. The color of the characters can be
  • Brother International PR680W | Operation Manual - Page 58
    selected are highlighted in blue. Finding new color schemes with the Color Shuffling function With the Color Shuffling function, the machine suggests new color schemes for the embroidery pattern that you have selected. After you select the desired effect from one of the four available color schemes
  • Brother International PR680W | Operation Manual - Page 59
    number of c colors you want to create the pattern with. 1 BASIC EMBROIDERY [Manual] setting for [Gradient] You can select one color to be used the thread * If you don't need to specify the thread color, just set to . [Manual] setting for [Random] You can select up to 6 colors to be used in the
  • Brother International PR680W | Operation Manual - Page 60
    colors on the screen can be switched to match the spool stand thread color position. Memo • This function is not available when you set [Manual Color Sequence] to [ON] in settings screen. Touch a in the embroidering screen. Check the displayed color scheme, and then touch h . * : Return to the
  • Brother International PR680W | Operation Manual - Page 61
    needles which have been assigned a thread color. (page 107) Convenience of the manual color sequence The manual color sequence is convenient when the machine is being used under the following conditions. ■ When using embroidery data that has no thread color information, such as with DST files The
  • Brother International PR680W | Operation Manual - Page 62
    selected. Touch to return to the previous screen. d  The icon for [Manual Color Sequence] appears in the screen. ■ Manually assign thread colors to all needle bars By specifying the thread colors used with this machine, embroidery can continue more efficiently simply by changing the needle bar
  • Brother International PR680W | Operation Manual - Page 63
    • Step c of "Using the manual color sequence" on page 60 • "Stopping the machine at the next color change" on page 105 • "Specifying pause locations before embroidering" on page 105 Touch or to display the desired type of frame, b and then select the embroidery frame. • After determining the type
  • Brother International PR680W | Operation Manual - Page 64
    CAUTION • Your machine can embroider fabric that dissolve when washed, allowing you to create beautiful embroidery that is not stiff. • When embroidering fabric None away Satin jacket If garment slips in frame, causing alignment problems, wrap inner frame with masking tape or fabric bias tape.
  • Brother International PR680W | Operation Manual - Page 65
    , the embroidering area will not display the correct frame size. (page 66) 2 ■ Embroidery frame types There are four sizes of embroidery frames included with this machine, which are used with the included embroidery frame holder A. For details on the uses for each frame, refer to "Correctly using
  • Brother International PR680W | Operation Manual - Page 66
    presser foot and damage the machine or cause injury to the user. (For details on embroidery frames, refer to page 68.) Note • The embroidery frame indicators show all embroidery frame sizes in which the embroidery pattern can be embroidered. Be sure to use an embroidery frame of the most suitable
  • Brother International PR680W | Operation Manual - Page 67
    the embroidery frame to the machine. This will prevent the neck of the shirt from being stretched when the embroidery frame is moving. • Use a clothespin or binder clip to fasten the excess fabric to the embroidery frame. Note • We recommend installing the optional wide table to support large
  • Brother International PR680W | Operation Manual - Page 68
    the mark. Note • Please firmly tighten the two thumb screws with included 3-way screwdriver. If the thumb screws are not tightened, any of the following problems may occur. - The machine will detect the embroidery frame size incorrectly. - The starting position for the
  • Brother International PR680W | Operation Manual - Page 69
    needle bar move screen appears. Touch . b ■ Embroidery frame holders Two types of embroidery frame holders (embroidery frame holder A and embroidery frame holder B) are included with this machine. Embroidery frame holder A is used with the four included embroidery frames and the optional 300 mm
  • Brother International PR680W | Operation Manual - Page 70
    applications When the reference page is "*", contact your authorized Brother dealer. Embroidery frames that use embroidery frame holder A Embroidering area Embroidery frame Usage Reference page Extra-large embroidery 300 mm (W) × 200 mm (H) frame (11-3/4 inches (W) × 7-7/8 inches (H)) Use
  • Brother International PR680W | Operation Manual - Page 71
    × 100 mm (H) (4 inches (W) × 4 inches (H)) A variety of fabrics can be easily and firmly secured in the frame. * 2 Embroidery frames that do not use embroidery frame holders Embroidering area Embroidery frame Usage Cap frame (PRCFH3) (included in some countries or regions) Flat brim cap frame
  • Brother International PR680W | Operation Manual - Page 72
    optional wide table must be installed onto the machine. • Due to the weight of the embroidery frame and fabric, it is recommended that the Manual Color Sequence] to [ON] in settings screen. (page 60, page 72) 1 6 2 7 3 8 4 5 Display No. Key Name Function Page Shows the size of the embroidery
  • Brother International PR680W | Operation Manual - Page 73
    when the thread is trimmed. 72 Edit key Return to the pattern editing screen. - 5 Save a pattern in the machine's memory, USB 116 Memory key media or a computer. BASIC EMBROIDERY Display No. Key Name Function Page Specify the needle position Starting/ at the beginning of 112 ending
  • Brother International PR680W | Operation Manual - Page 74
    Function Page This icon appears when the 1 Manual color machine is in the [Manual 60 sequence Color Sequence] mode. mode icon Change the needle bar color setting. 2 Manual color This key appears when you 60 sequence key set [Manual Color Sequence] to [ON] in settings screen. Automatic
  • Brother International PR680W | Operation Manual - Page 75
    . Before starting to embroider, touch in the embroidering settings screen to rearrange the embroidering order and sort it by thread colors. Embroidering screen The embroidery color order is rearranged and sorted by thread colors. Touch to cancel the color sorting and embroider with the
  • Brother International PR680W | Operation Manual - Page 76
    positioning laser function cannot be used. • If the surface of the fabric is too uneven or rough, check and adjust the alignment of the embroidery crosshair positioning laser and the needle drop point before starting to embroider. • When using the cap frame, check and adjust the alignment of the
  • Brother International PR680W | Operation Manual - Page 77
    position By locking the needle bar (securing the needle and presser foot in the down position), the needle drop point can easily be seen. The embroidery crosshair positioning laser will be a aligned with the needle that is over the opening in the needle plate. As shown in the illustration, insert
  • Brother International PR680W | Operation Manual - Page 78
    will appear if the thread colors from the previous embroidery project will not be used. If you set [Manual Color Sequence] to [ON] in the settings bar. Touch . a  Current assigned colors are stored in the machine's memory, and the screen indicating that the spools be changed is minimized
  • Brother International PR680W | Operation Manual - Page 79
    accidentally started, otherwise injuries may result. Upper threading Use machine embroidery thread to thread the needle bars in order, starting with needle bar 1. CAUTION • When threading the upper thread, carefully follow the instructions. If the upper threading is not performing correctly, the
  • Brother International PR680W | Operation Manual - Page 80
    the thread with both hands, and then pass it d under the guide plate from the right. a 1 Number 1 hole in the thread guide above the spool 2 Number 1 hole in the thread guide toward the front of the machine 1 Upper thread guide plate Wind the thread clockwise once around the number 1 e thread
  • Brother International PR680W | Operation Manual - Page 81
    BASIC EMBROIDERY • Make sure that the thread is securely positioned in the thread the thread along the thread path and around the f correct thread guide pins as indicated on the machine. Slip the thread under the number 1 middle thread g guide plate from the right. 1 Thread take-up lever Pass the
  • Brother International PR680W | Operation Manual - Page 82
    needle-threading mechanism is bent or damaged, contact your authorized Brother dealer. • While the hook of the automatic needlethreading mechanism is become loose. Pass the thread under the guide on the presser foot. c 1 Guide on presser foot 2 Notch in guide on presser foot • Make sure that
  • Brother International PR680W | Operation Manual - Page 83
    Wiper is the mechanism for pulling the thread to back when the needle threader is used and when the thread is trimmed during embroidery. Press the automatic needle-threading button. e b a 1 Automatic needle-threading mechanism 2 Wiper • The threader moves back away from the needle. The thread is
  • Brother International PR680W | Operation Manual - Page 84
    by cutting the thread currently being used between the spool and the thread guide above the spool. Place the new spool on the spool pin and page 88). PERFORMING THE EMBROIDERY Memo • With the Monitoring App [My Stitch Monitor] installed on your smart device and the machine and smart device connected
  • Brother International PR680W | Operation Manual - Page 85
    is indicated by the green cross hairs in the pattern display area. In addition, the number of stitches and the time count up. After embroidery of the first color is finished, the c machine automatically stops and trims the thread. The needle bar case moves to the second color position and
  • Brother International PR680W | Operation Manual - Page 86
    machine.  The display and the "Start/Stop" button indicator go off. • Embroidery can resume after the machine is turned on again. Back up several stitches to overlap the stitching. (page 92) Memo • The machine a problem occurs while embroidering, such as if the thread breaks, the machine stops
  • Brother International PR680W | Operation Manual - Page 87
    the thread 58 [Manual spools on the machine. Color Sequence] mode) Enable the needle bar Temporary settings to manually be 106 5 in 82 green. BASIC EMBROIDERY Display No. Key Name Function Time until the machine stops Shows the amount of time until the machine will stop. When the
  • Brother International PR680W | Operation Manual - Page 88
    pins on the arms of the embroidery frame holder should come out of the holes in the sides of embroidery frame. EMBROIDERING A PATTERN CONTAINING instruction to change the thread spools will appear with the machine automatically stopping. Memo • This function is not available when you set [Manual
  • Brother International PR680W | Operation Manual - Page 89
    EMBROIDERY changing the spools. Memo • This feature is not available if [Manual Color Sequence] has been set to [ON] in the settings thread indicators When it is necessary to replace the thread spool, the machine automatically stops embroidering and the screen shown below appears. In addition,
  • Brother International PR680W | Operation Manual - Page 90
    thread. However, the thread spools can easily be changed when replacing a thread spool whose thread is correctly threaded through the machine. Cut the thread between the thread spool and the a thread guide. Change the thread spool. b Tie the end of the thread on the new spool with the end c of the
  • Brother International PR680W | Operation Manual - Page 91
    BASIC EMBROIDERY If the needle bar is moved back too far through the stitching, touch or to go forward through the stitching. If the thread breaks or the bobbin thread runs out while embroidering If the thread breaks or the bobbin thread runs out while embroidering, the machine will
  • Brother International PR680W | Operation Manual - Page 92
    be cleanly removed, trim the thread with scissors. • If the hook cover can be opened, replace the bobbin without removing the embroidery frame from the machine. • If the machine bed is hidden, for example, with a bagshaped piece of fabric, or if the hook cover cannot be opened, temporarily remove
  • Brother International PR680W | Operation Manual - Page 93
    stitch number 2 Note Touch . a • Be careful when going back or forward through the stitching since the embroidery frame moves at the same time. Press the "Start/Stop" button to stop the machine. a • If necessary, trim and remove the embroidered stitches. Touch . b Use the number keys to enter
  • Brother International PR680W | Operation Manual - Page 94
    was accidentally turned off, for example, due to a power outage, while it was embroidering: The remainder of the embroidery can be performed when the machine is turned on again; however, some of the stitches that were already embroidered may be embroidered again. 1 2 1 Cancel embroidering and
  • Brother International PR680W | Operation Manual - Page 95
    the pattern may be difficult to remove after embroidering is complete. Touch . a  The embroidery settings screen appears. Locate [Basting Distance] in the Settings pages. b Use and to from the pattern. • The setting remains selected even if the machine is turned off. 1 Basting stitching 93
  • Brother International PR680W | Operation Manual - Page 96
    material. Frame the fabric for the appliqué (from step a) in the b embroidery frame, and then embroider an [APPLIQUE MATERIAL] pattern. The line that indicates where the appliqué will be cut out is embroidered, and then the machine stops. Lightly apply fabric glue or spray adhesive to the back f of
  • Brother International PR680W | Operation Manual - Page 97
    a piece of stabilizer to the back of the felt g or denim fabric to be used as the appliqué piece. Hoop the appliqué fabric in the embroidery frame, h attach the embroidery frame to the machine, and then start embroidering. After the cutting line [APPLIQUE MATERIAL] is i embroidered, stop the
  • Brother International PR680W | Operation Manual - Page 98
    appliqué stitch. Use two layers of adhesive water-soluble stabilizer k material with their sticky sides together, and then hoop them in the embroidery frame. Note • Before pasting the appliqué piece down, make sure the appliqué piece is positioned correctly within the placement line. Embroider the
  • Brother International PR680W | Operation Manual - Page 99
    the other embroidered with satin stitches. Select a frame pattern embroidered with straight a stitches and embroider onto the base fabric. Remove the embroidery frame from the machine, and d then cut off the excess appliqué fabric along the outside of the stitching. Note • Leave the fabric in the
  • Brother International PR680W | Operation Manual - Page 100
    or echo quilting patterns can be created around the machine's built-in patterns or original embroidery data. Select the pattern that stippling will be added around. a Touch b in the pattern editing screen. USING THE EMBROIDERY CROSSHAIR POSITIONING LASER FUNCTION TO ALIGN THE EMBROIDERING
  • Brother International PR680W | Operation Manual - Page 101
    positioning laser function cannot be used. • If the surface of the fabric is too uneven or rough, check and adjust the alignment of the embroidery crosshair positioning laser and the needle drop point before starting to embroider. • When using the cap frame, check and adjust the alignment of the
  • Brother International PR680W | Operation Manual - Page 102
    center of the mark. If it is too close, a message will appear, prompting you to reposition it. • For best accuracy, set the position of the embroidery crosshair positioning laser on the reference direction of mark (3) as far away from the center of the mark as possible. Use a chalk pencil to mark
  • Brother International PR680W | Operation Manual - Page 103
    as a reference for aligning the pattern. For this example, select the arrow pointing upward as the reference direction. 1 Switch on/off the embroidery crosshair positioning laser. If a message appears, indicating that the move and f rotate settings will return to the original ones, touch . From the
  • Brother International PR680W | Operation Manual - Page 104
    the included weight to the end of the thread a extending from the bobbin case. Prewound bobbins c 3 Reference direction of mark 4 Embroidery crosshair positioning laser Touch . n  The pattern is repositioned. a 1 Weight (L) Note • Different weights are used to adjust prewound bobbins and metal
  • Brother International PR680W | Operation Manual - Page 105
    After making the adjustments, try embroidering with d all needle bars to check the thread tension. Memo • In the built-in embroidery patterns, one pattern is used for checking the thread tension. By embroidering this pattern, the thread tension can easily be checked. From the wrong side
  • Brother International PR680W | Operation Manual - Page 106
    Dark gray color represents bobbin thread. Turn the knob in the direction of the arrow to decrease the tension of the upper thread. 1 Upper thread guide pretension knob 2 Tighter 3 Looser ■ Correct Thread Tension The pattern can be seen from the wrong side of the fabric. If the thread tension is not
  • Brother International PR680W | Operation Manual - Page 107
    EMBROIDERY Turn the knob in the direction of the arrow to increase the tension of the upper thread. From the thread color sequence display, select the b thread color where you wish to stop the machine before continuing to embroider. Setting the machine to stop at color changes The machine machine,
  • Brother International PR680W | Operation Manual - Page 108
    is being embroidered. Uninterrupted embroidering (one color) A selected pattern can be stitched out in one color instead of multiple colors. The machine will hesitate but not stop between color steps, and then continue until the pattern is completed. Touch in the embroidering settings screen
  • Brother International PR680W | Operation Manual - Page 109
    machine's automatic assignments and the specified color remains assigned to it. By specifically assigning often used thread colors to certain needle bars, the trouble of changing the thread spools can be reduced. Also, the maximum embroidery normal mode. When you set [Manual Color Sequence] to [ON]
  • Brother International PR680W | Operation Manual - Page 110
    Specified needle bar is indicated with and the specified maximum embroidery speed in the embroidering screen. ■ Canceling the setting Note blue. Touch . b 1 1 disappears from the thread spool.  The manual needle bar setting is canceled. To cancel the cancel needle threading setting, touch
  • Brother International PR680W | Operation Manual - Page 111
    pattern display area can be specified. The machine automatically detects the type of embroidery frame holder and embroidery frame that are installed and displays them. Touch .  The embroidery settings screen appears. 2 1 3 4 1 How the guides will appear with the specified settings can be
  • Brother International PR680W | Operation Manual - Page 112
    point will happen. Deleting short stitches If embroidery data other than our original patterns are used, the stitch length may be too short, possibly resulting in the thread or the needle breaking. In order to prevent this problem from occurring, the machine can be set to delete stitches with
  • Brother International PR680W | Operation Manual - Page 113
    will not to be embroidered) can be applied to a part of the pattern with a specific color. In this way, you can arrange the embroidery without actually editing the pattern. Touch a in the embroidering settings screen. Touch . c  The mark appears to indicate that the selected thread color will
  • Brother International PR680W | Operation Manual - Page 114
    combined with , the deselect region setting will also be canceled for all thread colors that are the same as the one that was selected. The machine can set the starting point and the ending point separately from the 9 points of the whole pattern. Those are upper-left corner, upper-center, upper
  • Brother International PR680W | Operation Manual - Page 115
    . 1 Starting position 2 Ending position After embroidering is finished, the machine stops at the e lower-right corner of the pattern. 3 Select d and e three Note • If the next embroidery pattern of the series will be stitched outside the embroidery field, the message to inform you that it cannot
  • Brother International PR680W | Operation Manual - Page 116
    for "DEF". i In the embroidering settings screen, touch . j Touch . k  The needle bar is positioned in the lower-left corner of the pattern. The embroidery frame moves so that the needle is positioned correctly. Note • To cancel the starting point setting and return the starting point to the
  • Brother International PR680W | Operation Manual - Page 117
    needle drop point aligns with the beginning of stitching. With a fabric marker, mark this point on the fabric. f Remove the embroidery frame from the machine, and g then connect these two points to check the embroidering position. • If the baseline is misaligned or intersects another line, reframe
  • Brother International PR680W | Operation Manual - Page 118
    USB ports for the computer and for the machine. Copy the embroidery pattern file to the removable disk that has been assigned to the embroidery machine. 4 Retrieve the pattern via the wireless network connection. For detailed procedures, refer to the manual of PEDESIGN (version 11 or later) or
  • Brother International PR680W | Operation Manual - Page 119
    with the Link function, such as PE-DESIGN NEXT or later, to be transferred from a computer to multiple machines. As many as 100 embroidery patterns can be transferred to a machine, and the embroidering status of the patterns being transferred can be viewed from the computer monitor. Use the included
  • Brother International PR680W | Operation Manual - Page 120
    wireless LAN connection, refer to page 30. Turn on the machine. h  A message appears in the machine's LCD while the machine is connecting to computer. Note • For details on using the embroidery editing software, refer to the Instruction Manual included with it. * This Link dialog box is found in
  • Brother International PR680W | Operation Manual - Page 121
    status can be displayed by using a function of the embroidery editing software. If multiple machines are connected at the same time, check the status of the machines using the 10-digit machine ID or machine's name that appears in the machine's screen. The following information can be viewed from the
  • Brother International PR680W | Operation Manual - Page 122
    status can be displayed by using a function of the embroidery editing software. If multiple machines are connected at the same time, check the status of the machines using the 10-digit machine ID or machine's name that appears in the machine's screen. The following information can be viewed from the
  • Brother International PR680W | Operation Manual - Page 123
    instructions, refer to the manual included with PE-DESIGN version 7 or later, or PE-DESIGN NEXT. The following procedure describes how to read the large-size embroidery pattern shown below from USB media and embroider it. 3 If necessary, edit the pattern. Then, touch . c Connect to the machine
  • Brother International PR680W | Operation Manual - Page 124
    pattern can be selected. 1 Alignment stitching Note • For details on aligning and stitching split, large-size embroidery patterns, refer to the manual included with PE-DESIGN version 7 or later, or PE-DESIGN NEXT. Repeat steps g to j to embroider and combine the l remaining sections of the
  • Brother International PR680W | Operation Manual - Page 125
    Brother dealer. 1. c Part Name Part Code 9. Bobbin winder b PRBW1 d a 10. ADVANCED EMBROIDERY Part guide 4 Hole for spool pin 5 DC input connector 2. e Spool pin XC5949-051 Memo • The part code of the bobbin winder set may differ depending on the country/area where the machine
  • Brother International PR680W | Operation Manual - Page 126
    household electrical outlet. 1 Spool pin 2 Spool pin holder 3 Hole for spool pin 4 Spool cushion Insert the thread guide. b Insert the thread guide straight into the hole with the pins on the thread guide aligned with the notches on the sides of the hole. • Be sure to firmly insert the plug on the
  • Brother International PR680W | Operation Manual - Page 127
    EMBROIDERY Winding the bobbin Prepare the bobbin and the spool of bobbin thread. Use cotton or spun polyester bobbin thread (from 74 dtex/2 to 100 dtex/2). Pass the thread through the hole in the left of the c thread guide of the e thread guide toward the back of the machine. 1 Thread spool 2
  • Brother International PR680W | Operation Manual - Page 128
    4 or 5 f times, as shown in the illustration. Press the main power switch to start winding the i bobbin. Pass the end of the thread through the guide slit in the g bobbin winder seat, and pull the thread. The cutter will cut the thread.  Start winding the bobbin. The bobbin will stop rotating
  • Brother International PR680W | Operation Manual - Page 129
    the thread through the guide slit in the bobbin l winder seat to cut the thread with the cutter. ADVANCED EMBROIDERY CAUTION 3 • Check tension of the bobbin thread each time that the bobbin is changed. For detailed instructions on how to adjust the bobbin tension, refer to page 102. ■ If bobbin
  • Brother International PR680W | Operation Manual - Page 130
    128
  • Brother International PR680W | Operation Manual - Page 131
    4 Chapter ADMINISTRATOR MODE ADMINISTRATOR MODE ADMINISTRATOR LOCK Settings screens can be locked so that only the administrator can change the settings. In order to access the settings screens, the 6-digit passcode specified by the administrator must be entered. Afterwards, each time a settings
  • Brother International PR680W | Operation Manual - Page 132
    lock screen key is touched. • The LCD screen is touched after the set length of time has passed, causing the screen saver to appear. • The machine is turned off, then on again. 1 1 Lock screen key Touch . e  Administrator lock is canceled, and the key symbols are removed from the settings keys
  • Brother International PR680W | Operation Manual - Page 133
    ADMINISTRATOR MODE Touch d beside [Operator Lock]. Type in the new passcode (4 digits). e Type it in again for confirmation. f • If a mistake was made while typing, start over with the first digit. Touch . g Touch . h  Afterwards, each time the LCD screen is locked, the 4-digit passcode
  • Brother International PR680W | Operation Manual - Page 134
    key display, errors can be reduced, job efficiency increased, and the machine used more easily. Once specified, the key display optimization settings can recalled at any time. Memo • This function cannot be used when the machine is in Link mode. In the pattern type selection screen, touch the keys
  • Brother International PR680W | Operation Manual - Page 135
    key. 4 Touch to continue to the embroidering settings h screen. * For details on the keys, refer to step f. Touch to continue to keys used when retrieving j embroidery patterns. * For details on the keys, refer to step f. 133
  • Brother International PR680W | Operation Manual - Page 136
    storage destination), touch the keys not to be available when retrieving an embroidery pattern.  The selected key changes to gray, and the prohibition retrieving patterns in the following situations. - When retrieving from the machine's memory - When retrieving from USB media - When retrieving
  • Brother International PR680W | Operation Manual - Page 137
    When the optimization settings are deactivated, the screens will appear normally. 4 Touch . f  The recalled optimization settings are applied to the machine. Recalling key display optimization settings Key display optimization settings saved on USB media can be recalled. Memo • Key display
  • Brother International PR680W | Operation Manual - Page 138
    136
  • Brother International PR680W | Operation Manual - Page 139
    that has been soaked in lukewarm water and then thoroughly wrung • If the hook is scratched or damaged, consult your authorized Brother dealer. dry. After cleaning the machine, dry it with a soft, dry cloth. CAUTION After cleaning is finished, insert the bobbin case into d the hook, and then
  • Brother International PR680W | Operation Manual - Page 140
    collect around the moving knife, the fixed knife or the thread retaining plate, the thread may not be cut correctly and various parts of the machine may be damaged. Make sure to clean around the needle plate once a month. Use the included 3-way screwdriver and cleaning brush. Set the main power
  • Brother International PR680W | Operation Manual - Page 141
    upper threads If dust or lint has accumulated in the thread guides or tension unit in the paths of the upper threads, the thread may break while embroidery is being performed. Periodically clean the thread paths. ■ Cleaning the thread guides Use the included cleaning brush to remove any lint and
  • Brother International PR680W | Operation Manual - Page 142
    unit. c Replacing the needle CAUTION • Be sure to turn off the machine before replacing the needle, otherwise injuries may result if the machine starts embroidering. • Your machine is designed to use household embroidery needles. The factory recommended needle is "HAX 130 EBBR" (Organ). Schmetz
  • Brother International PR680W | Operation Manual - Page 143
    set screw clockwise. With the flat side of the needle toward the back of the c machine, insert the needle all the way up until it touches the needle bar stopper. Pass the is bent or damaged, contact your authorized Brother dealer. 1 End of the needle changing tool 2 Needle mounting clamp 141
  • Brother International PR680W | Operation Manual - Page 144
    , put a drop of oil onto the hook once a day before use. Note • Touch , , , then , in that order, to see a video of how to oil the machine. ■ Oiling the race Touch . a Touch . b Put a drop of oil onto the hook. e Front angle view Side view 1 Punch a small hole in oil bottle. 2 Apply
  • Brother International PR680W | Operation Manual - Page 145
    About the maintenance message 1 Apply oil here. • Too much oil may drip onto embroidery project. Note • Put a drop of oil onto the hook once a day before your machine to your nearest authorized Brother dealer for a regular maintenance check. Although this message will disappear and the machine will
  • Brother International PR680W | Operation Manual - Page 146
    Brother Support website offers the latest FAQs and troubleshooting tips. Visit us at http:// s.brother/cpban/ . If the problem persists, contact your authorized Brother dealer or the nearest Brother authorized service center. List of Symptoms If you have a minor problem with your machine, check
  • Brother International PR680W | Operation Manual - Page 147
    by the needle bar thread guide. The upper thread tension is set too high. 104 A bobbin designed specifically for this machine is 35 not used. The design system, correct the thread density and overstitching settings in the embroidery data. The thread is not cut automatically. Lint or dust has
  • Brother International PR680W | Operation Manual - Page 148
    machine and re-thread the machine. Make sure the thread is correctly positioned in the needle bar thread guide. Upper thread is not positioned in upper or middle 77 thread guide correct the thread density and overstitching settings in the embroidery data. Lint or dust has accumulated in the thread
  • Brother International PR680W | Operation Manual - Page 149
    or middle thread guides, causing the thread guide plates to rise. Clean the thread guide plates. Thread is embroidery with different thread. If the problem no longer occurs after the thread is changed, the thread quality is the problem. Replace the thread with one of good quality. The machine
  • Brother International PR680W | Operation Manual - Page 150
    Although the thread is not broken, a broken thread error occurs and the machine stops. If the thread breakage sensor in the thread 140 tension disc of fabric and thread being used. Polyester thread will stretch during embroidery especially if the tensions are set too high. After the stitching
  • Brother International PR680W | Operation Manual - Page 151
    not threaded with the upper thread, the machine will not operate correctly, even if the "Start/ Stop" button is pressed after unlocking the machine. • If the machine suddenly stops: • Turn off the machine, and unplug the power cord. • Restart the machine with the correct operating procedure. (page
  • Brother International PR680W | Operation Manual - Page 152
    is not correctly set up or if an incorrect operation is performed, the machine stops and informs you of the error with a buzzer and an error message. If an error message appears, correct the problem according to the instructions in the message. To close the message, touch or perform the correct
  • Brother International PR680W | Operation Manual - Page 153
    embroidering settings screen. This message is displayed when embroidery cannot begin from the specified starting position. Change the pattern in the machine's memory. 17 Machine PCB power off. When this message is displayed, consult your nearest authorized Brother dealer. 18 Machine PCB reset.
  • Brother International PR680W | Operation Manual - Page 154
    needle bar case transferring. This message is displayed when thread guide assembly support is not prepared. Prepare the thread guide assembly. (page 19) When this message is displayed, consult your nearest authorized Brother dealer. When this message is displayed, consult your nearest authorized
  • Brother International PR680W | Operation Manual - Page 155
    machine supports the following authentication methods: Authentication method Encryption method WPA-Personal WPA2-Personal Open Shared key TKIP AES TKIP AES WEP None (without encryption) WEP If your problem fits in the embroidery frame. Rotate machine is allowed in the filter. 2. If you manually
  • Brother International PR680W | Operation Manual - Page 156
    is displayed when the file format is incompatible with this machine. Check the list of compatible file formats. (page 156 your nearest authorized Brother dealer. When this message is displayed, either replace the embroidery frame with a manually enter the SSID. 1 SSID 2 Network key (password) a b 154
  • Brother International PR680W | Operation Manual - Page 157
    do not respond, even after the touch panel is adjusted, or if the touch panel cannot be adjusted, contact your nearest authorized Brother dealer. Turn the machine off, and on again. d • Continue touching the touch panel until the screen shown below appears. • The "Start/Stop" button is red.  The
  • Brother International PR680W | Operation Manual - Page 158
    Mode] [Eco Mode] [Shutoff Support Mode] Embroidery data can be recalled only: • USB external CD/DVD drives Available time [OFF], 10 - 120 (minute) "Start/Stop" button Green flashing Suspended function Machine light, Embroidery crosshair positioning laser, Screen display After recovering
  • Brother International PR680W | Operation Manual - Page 159
    on a computer. If embroidery data is stored in a folder in "Removable Disk", that embroidery data cannot be retrieved by the machine. *2 The wireless but some USB media may not be usable with this machine. Please visit our website http://s.brother/cpban/ for more details. * Depending on the type
  • Brother International PR680W | Operation Manual - Page 160
    details on the wireless LAN connection, refer to page 30. Touch . a  The following screen will appear on the LCD. Touch e to update the machine. Memo • The machine periodically checks if there is a new update file on the server. When there is a new update file, the wireless LAN key is displayed
  • Brother International PR680W | Operation Manual - Page 161
    can be updated using USB media. For update information, refer to the Brother support website http:// s.brother/cuban/ . If an update file is posted, download the file, and then update the machine according to the following procedure. While pressing the automatic needle-threading button, a turn
  • Brother International PR680W | Operation Manual - Page 162
    display guides 109 machine 66 types 68 Embroidery frame holder attaching 21 , , Embroidery frame holders 67 Embroidery frame indicators 46 63 70 Embroidery key 71 Embroidery light 11 Embroidery patterns editing 46 selecting 37 Embroidery setting key 85 Embroidery sheet 64 Embroidery
  • Brother International PR680W | Operation Manual - Page 163
    Touch pen holder 11 Trial embroidery key 71 Troubleshooting 144 T-shirt 63 5 U Uninterrupted embroidering (one color 106 Unlock key 85 Updating machine's software 158 USB media 159 Wireless LAN connection 158 Upper thread guide 11 , Upper thread guide pretension knob 104 Upper threading
  • Brother International PR680W | Operation Manual - Page 164
  • Brother International PR680W | Operation Manual - Page 165
  • Brother International PR680W | Operation Manual - Page 166
  • Brother International PR680W | Operation Manual - Page 167
    . Google Play™ App Store Design Database Transfer is a dedicated Windows application for wirelessly transferring embroidery data from a computer to the machine. This application can also be used to view and manage embroidery data. Visit us at http://s.brother/cabkb/ to download the application.
  • Brother International PR680W | Operation Manual - Page 168
    http://s.brother/cvban/ to view Instruction Videos. Be sure to install the latest software. A variety of functional improvements are being performed in the latest version. Brother SupportCenter is a mobile app that provides the support information for your Brother product. This machine is approved
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
Operation Manual
Embroidery Machine
Product Code: 884-T23
Be sure to read this document before using the machine.
We recommend that you keep this document nearby for future reference.