Brother International PT 1700 Users Manual - English and Spanish
Brother International PT 1700 - Electronic Labeler Manual
UPC - 012502525851
View all Brother International PT 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International PT 1700 manual content summary:
- Brother International PT 1700 | Users Manual - English and Spanish - Page 1
PT-1700 USER'S GUIDE qRead this User's Guide before you start using your P-touch. qKeep this User's Guide in a handy place for future reference. ® - Brother International PT 1700 | Users Manual - English and Spanish - Page 2
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may - Brother International PT 1700 | Users Manual - English and Spanish - Page 3
5 BEFORE YOU START 6 INSERTING A TAPE CASSETTE 6 INSERTING BATTERIES 7 CHANGING THE CUTTER UNIT 8 STARTING 9 CREATING A MESSAGE 10 DISPLAY 10 MOVING THE CURSOR 10 CLEARING THE DISPLAY 11 KEY OPERATIONS 12 INPUT...13 SPACE KEY 14 SYMBOLS 15 EDITING A MESSAGE 18 DELETING 18 WORD OUT 20 - Brother International PT 1700 | Users Manual - English and Spanish - Page 4
Tape exit slot Tape cartridge cover AC adaptor slot A A A AA CAPS STL UNDL/FRM SIZE STYLE UNDL/FRM BIG ! @ # $ 1¡ 2 3 4 Q W E R NUMBER REPEAT TAPE % 5 T INSERT ¢ 6 Y STORE RECALL M. DEL WORD OUT CLEAR & * ( ) DEL 7 8 9 0 MEMORY U I O P ü í ó á ALT A SYMBOL - Brother International PT 1700 | Users Manual - English and Spanish - Page 5
Print head Tape cutter unit Tape release lever -3- - Brother International PT 1700 | Users Manual - English and Spanish - Page 6
Battery compartment latch Tape exit slot Battery compartment Tape cutter lever -4- - Brother International PT 1700 | Users Manual - English and Spanish - Page 7
PRECAUTIONS q Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. q Four different tape widths are available: 1/4"(6mm), 3/8"(9mm), 1/2"(12mm) and 3/4"(18mm). q Do not pull the tape. This may damage the tape cassettes. q Do not clean the machine with alcohol or - Brother International PT 1700 | Users Manual - English and Spanish - Page 8
A TAPE CASSETTE Brother TZ tapes are only available in the following widths for this machine: 1/4"(6mm), 3/8"(9mm), 1/2"(12mm) and 3/4"(18mm). To insert a new tape cassette: (1) Lift the cassette cover so that you can reach the tape cassette easily. This will also release the installed cassette - Brother International PT 1700 | Users Manual - English and Spanish - Page 9
(Model AD-30:7V, 1.2A) Note: q When replacing batteries, do so in three minutes or less. Otherwise, unless an optional AC Adaptor is attached, any message in the working area or Phrase Memory will be lost. q Note the following details when 1.2 V rechargeable NiCd batteries are used in this machine - Brother International PT 1700 | Users Manual - English and Spanish - Page 10
CHANGING THE CUTTER UNIT When the cutter is not cutting well, replace it with a new one. To replace a cutter with a dull or broken blade: (1) Open the tape cassette compartment cover and carefully remove the tape cassette if it is installed. (2) Grasp the cutter with your fingers and pull it out. (3) - Brother International PT 1700 | Users Manual - English and Spanish - Page 11
created, and displays it when you turn on the machine. This feature allows you to stop work on a message, turn off the machine, and return to it later without having to re-enter the message. The machine has an automatic power down feature. If the machine is on, but is not used for five minutes - Brother International PT 1700 | Users Manual - English and Spanish - Page 12
in length. The four-character display is like a window which moves across your message. 1234567890123456789012345678901234567890123456789012345 MOVING THE CURSOR You can review and edit different parts of your message by moving the cursor backward and forward. To move the cursor through your - Brother International PT 1700 | Users Manual - English and Spanish - Page 13
message, you will often need to clear an old message. To erase the previous message from the display: Hold down the CODE key and press the CLEAR key. Example q Erase any message a sample message, first creating it, then editing it, next printing it, and finally storing it in the machine's memory. - Brother International PT 1700 | Users Manual - English and Spanish - Page 14
KEY By using the SHIFT key you can type capital letters, and symbols located on the upper part of keys. To type a capital "A", hold the SHIFT key down numbers -- not the symbols above them -result. For this reason, CAPS mode is particularly useful for creating messages containing many numerals and - Brother International PT 1700 | Users Manual - English and Spanish - Page 15
INPUT You can now use the keys to enter a message. Example To input "Mr.": q Press SHIFT CAPS + M ñ to input a capital M. A A A AA M CAPS STL UNDL/FRM q Complete "Mr." by pressing R then ?. / . A A A AA M r . CAPS STL UNDL/FRM -13- - Brother International PT 1700 | Users Manual - English and Spanish - Page 16
SPACE KEY As on a typewriter, this machine's SPACE key lets you add a blank space into your message. Note: The SPACE key and the key have different functions. The key moves the cursor forward without adding blank spaces. Example To complete the message "Mr. J Smith": Enter the initial "J": q - Brother International PT 1700 | Users Manual - English and Spanish - Page 17
arranged into 15 groups, corresponding to the numbers A to O on the keyboard. Group No. A B C D E F G H SYMBOLS ÜÆ æ § + ×÷= • ®©™ [] 1_ 2 ° 2 3 ªº n 5 2 3 4 Group No. I J K L M N O SYMBOLS To input a symbol that is not on the key top: (1) Hold down the CODE key and press the - Brother International PT 1700 | Users Manual - English and Spanish - Page 18
the cursor is located at the place where you want to add a symbol. To add a telephone symbol ( ) to the message, changing the message to "Mr. J Smith ": q Enter Symbol Mode by pressing CODE + . ALT SYMBOL q The following message will be displayed: A A A AA A-O? CAPS STL UNDL/FRM q Press the - Brother International PT 1700 | Users Manual - English and Spanish - Page 19
Push SET to input a . The message should now look like this: A A A AA Mr.J Sm i t h CAPS STL UNDL/FRM After a non-keyboard symbol has been entered, the machine automatically exits from Symbol Mode. If you wish to enter another symbol, you must re-enter Symbol Mode by holding down the CODE key - Brother International PT 1700 | Users Manual - English and Spanish - Page 20
right of the character you want to delete. (2) Press the DELETE key. Example To delete the from the message: q Make sure the cursor is positioned to the right of the telephone symbol. A A A AA Mr.J Sm i t h CAPS STL UNDL/FRM CLEAR q Press DEL to remove the . A A A AA Mr.J S m i t h CAPS STL - Brother International PT 1700 | Users Manual - English and Spanish - Page 21
Now we will delete the blank space between the "J" and "S": q Press TOP until the cursor is positioned to the right of the blank space (under the "S"). A A A AA Mr.J S m i t h CAPS STL UNDL/FRM CLEAR q Press DEL to remove the blank space. A A A AA Mr.J S m i t h CAPS STL UNDL/FRM q Press TOP - Brother International PT 1700 | Users Manual - English and Spanish - Page 22
number or word located before the cursor and after the nearest preceeding space will be deleted. Example To delete the word "Mr." from the message: q Press TOP to position the cursor under "J". A A A AA M r . J Smith CAPS STL UNDL/FRM q Press CODE WORD OUT ) + 0 to delete "Mr.". A A A AA - Brother International PT 1700 | Users Manual - English and Spanish - Page 23
a character: (1) Move the cursor to the character you want to change. (2) Press the character or symbol you want. The new character replaces the old one in the message. Example To replace the lower-case letters "mith" with capital letters: q Position the cursor under the "m". A A A AA J S m i th - Brother International PT 1700 | Users Manual - English and Spanish - Page 24
want to insert a character into the middle of your message. To do so, you must change from Overtype Mode keyboard character or symbol you want to add (see SYMBOLS). All characters following the insertion will move one space to the right. Example To insert a period into the message, changing it to - Brother International PT 1700 | Users Manual - English and Spanish - Page 25
(OVERWRITE MODE) A A A AA I: × CAPS STL UNDL/FRM (INSERT MODE) A A A AA I : CAPS STL UNDL/FRM q Release the CODE key when the display shows "I: ". q Press the ? • ' key. A A A AA J . S M I TH CAPS STL UNDL/FRM To leave INSERT Mode: Holding down the CODE key press the INSERT key again - Brother International PT 1700 | Users Manual - English and Spanish - Page 26
different character sizes, styles, fonts, underline/frames and tape feed settings. Choose character size, style, underline/box and tape feed before printing the label. Note: The type of character you choose will be used for all the characters in your message. It is not possible to have two different - Brother International PT 1700 | Users Manual - English and Spanish - Page 27
To choose a character size: (1) Holding down the CODE key, press the SIZE key to change the character size. The size indicator on the display advances in the order shown. 1 W2 H2 4 8 A A A AA CAPS STL UNDL/FRM (2) Stop pressing the SIZE key when your desired character size is indicated. Example - Brother International PT 1700 | Users Manual - English and Spanish - Page 28
character sizes 1, W2, H2, 4, 8, BIG 1, W2, H2, 4, 8 1, W2, H2, 4, 8 1, W2 If a character size is set which is not shown in the above table for the tape width being used and the PRINT key is pressed, an error message will be displayed and the label can not be printed. -26- - Brother International PT 1700 | Users Manual - English and Spanish - Page 29
BIG SIZE FONT This machine has a BIG size font in addition to the normal font. The normal size font can be set at the standard size, W2 ( upper case, and the settings for SIZE, STYLE and UNDL/ BOX are ignored. q The BIG size font can only be set when tape with a 3/4" (18 mm) width is used. -27- - Brother International PT 1700 | Users Manual - English and Spanish - Page 30
(OUTL) Italic + Outline (IT+O) Bold (BOLD) Italic + Bold (IT+B) Shadow (SHAD) Italic + Shadow (IT+S) Vertical (VERT) To choose a print style for your label: (1) Holding down the CODE key, press the STYLE key once. The display will show the current print style. (2) Still holding down the CODE - Brother International PT 1700 | Users Manual - English and Spanish - Page 31
Note: q Only Normal style characters can be printed vertically. q Vertical printing can not be used with some tape width and character size combinations. Example To use Outline print: q Hold down CODE . STYLE q Press @ 2 until the display reads "OUTL". The style indicator turns on. A A A - Brother International PT 1700 | Users Manual - English and Spanish - Page 32
available simultaneously. q The underline or box will not be printed when the Vertical is used. q Printing of the underline or frame are limited by the tape width and character size setting. -30- - Brother International PT 1700 | Users Manual - English and Spanish - Page 33
Tape width Possible character sizes 3/4" (18 mm) 1, W2, H2, 4, 8, BIG 1/2" (12 mm) 1, W2, H2, 4, 8 3/8" (9 mm) 1, W2, H2, 4, 8 1/4" (6 mm) 1, W2 A triangle indicator on the display appears whether Underline or Frame is set on. Box 1 Box 3 Box 2 Box 4 -31- - Brother International PT 1700 | Users Manual - English and Spanish - Page 34
ready to print the label. To print a label: Press the PRINT key. The printed label comes out of the tape exit slot on the side of the machine. Press the CODE + FEED key before cutting the tape if TAPE FEED mode is set to or "###". Example To print the message onto a label: q Press PRINT MIRROR - Brother International PT 1700 | Users Manual - English and Spanish - Page 35
To cut the tape: Pull out the tape cutter lever on the side of the machine. Example To cut the label: q Pull out the tape cutter lever. MITH J.SMITH Note: If you pull out the tape cutter lever too far, it may break. To attach the label: Remove the label backing and attach the label at the - Brother International PT 1700 | Users Manual - English and Spanish - Page 36
print the same label up to nine times. To use the REPEAT PRINTING function: It is recommended to set the TAPE FEED mode to "#", "##" or "###". (Please refer to page 39.) (1) Hold down the CODE key and press the REPEAT ( W REPEAT ) key. (2) The following message appears on the - Brother International PT 1700 | Users Manual - English and Spanish - Page 37
until the last number is reached. Press the CODE + FEED keys before cutting the tape if the TAPE FEED mode is set to or "###". Note: q Before printing, you can press the text, printing will be disabled, and an "ERR" (ERROR) message will appear on the display if you press the PRINT key. -35- - Brother International PT 1700 | Users Manual - English and Spanish - Page 38
q Numbers are always incremented one at a time. q If the battery becomes weak during a NUMBERING operation, the operation will be interrupted. Example To use the NUMBERING function: q Position the cursor beneath the number in the text to be incremented. A A A AA JU L Y 4 CAPS STL UNDL/FRM q - Brother International PT 1700 | Users Manual - English and Spanish - Page 39
q Press numeric key "6". A A A AA 6 CAPS STL UNDL/FRM q Press PRINT MIRROR . Your text will be printed out. q The number will automatically be incremented by one, and the text will be printed out again. q The printing operation will be repeated until the number you selected as the last - Brother International PT 1700 | Users Manual - English and Spanish - Page 40
the adhesive side of the tape. If the labels are then attached to glass or MIRROR key again. The display changes between the following two messages: (MIRROR PRINTING) A A A AA A A A AA The Mirror Printing function automatically turns off when the machine is turned off. If you want to use Mirror - Brother International PT 1700 | Users Manual - English and Spanish - Page 41
, this function is very convenient when printing more than one label with multiple styles while changing the styles each time a label is printed. To change the TAPE FEED Mode: (1) Press and hold down the CODE key, then press the TAPE key. (2) The current feed mode appears on the display. (3) While - Brother International PT 1700 | Users Manual - English and Spanish - Page 42
characters may be cut off. (See the illustrations below.) Example q When "####" is set, the tape is automatically fed 1"(24mm) after the label is printed. If the tape is cut without being fed, a label like that shown in the illustration below is produced. 1" (24mm) 1" (24mm) q When "- " is set - Brother International PT 1700 | Users Manual - English and Spanish - Page 43
4mm)(4mm) 1/6"1/6" (4mm)(4mm) 1/6" (4mm) 2. Numbering (See page 35.) q Printing with different styles When "- " is set, different styles can be used to print one label since the tape is not fed after a label is printed, different characters can be entered and the style can be changed. If the new - Brother International PT 1700 | Users Manual - English and Spanish - Page 44
can be divided into as many as nine areas. The maximum capacity for any single area is 55 characters. Note: When replacing batteries, do so in three minutes or less. Otherwise, unless an optional AC Adaptor is attached, any message in the working area or Phrase Memory will be lost. STORING THE - Brother International PT 1700 | Users Manual - English and Spanish - Page 45
If the area you select is already being used, an error message will briefly appear, and then the display will again ask you to choose an area. In that event, please select a different number from 1 to 9. If - Brother International PT 1700 | Users Manual - English and Spanish - Page 46
appear on the display. If you selected the wrong number, you can now press a new number key (1-9) to display the correct phrase. (5) When your desired message is on the screen, press the SET key. (6) The Phrase Memory you select is recalled into the working area for use. Note: q The character size - Brother International PT 1700 | Users Manual - English and Spanish - Page 47
appears on the display, along with its area number. A A A AA 1:J. CAPS STL UNDL/FRM To alter recalled memory: q Press SET . The message is moved to the working area and remains on the display. A A A AA J . S M ITH CAPS STL UNDL/FRM q You can see the current printing information on - Brother International PT 1700 | Users Manual - English and Spanish - Page 48
UNDL/FRM (2) Select the number key (1-9) of the memory area you want to delete, and press it. The key number and the beginning of the message appear on the display. If you accidentally selected the wrong number, you can press another number key (1-9) to display the correct phrase. (3) When your - Brother International PT 1700 | Users Manual - English and Spanish - Page 49
appears on the display. A A A AA 1:J. CAPS STL UNDL/FRM q Press SET . The message is deleted from the memory. The message previously in the working area (in this case, the same "J. SMITH") appears on the display. Note: Before you press SET CLEAR DEL . you can cancel - Brother International PT 1700 | Users Manual - English and Spanish - Page 50
MESSAGE LIST ERR BATT FULL NORM OUTL BOLD SHAD ITAL IT+O IT+B IT+S VERT A-O? 1-9? BIG M: M: × TEXT UNDL BOX 1 BOX 2 BOX 3 BOX 4 I : I: × Input error. The selected tape type is incorrect. The batteries are weak or empty. The working area is full (max: 55 characters) or the Phrase Memory is full ( - Brother International PT 1700 | Users Manual - English and Spanish - Page 51
inserted properly. q If the tape cassette is empty, replace it with a new one. q Check that the character size is appropriate for the width of the tape that is used. q The batteries are probably weak. Replace them. q The cutting blade is probably dull. Replace the cutter unit. q You have reached - Brother International PT 1700 | Users Manual - English and Spanish - Page 52
: Pressure-sensitive adhesive-based (TZ TAPE ONLY) 3/4" (18mm) (W) × 315"(8m) (L) 1/2" (12mm) (W) × 315"(8m) (L) 3/8" (9mm) (W) × 315"(8m) (L) 1/4" (6mm) (W) × 315"(8m) (L) LCD: 7 x 5 dots 1line x 4 columns Power Supply: Batteries (AA/SUM-3/AM3/R6/LR6) or optional AC Adaptor. (AD-30:7V 1.2A - Brother International PT 1700 | Users Manual - English and Spanish - Page 53
ACCESSORIES q Supplies Obtain tape cassettes, AC Adaptors and tape cutters from your nearest authorized dealer. Brother cannot be held responsible for trouble caused by the use of unauthorized supplies. Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. Stock - Brother International PT 1700 | Users Manual - English and Spanish - Page 54
AC ADAPTER 1 TC-9 TAPE CUTTER 1 PRICE $14.99 $16.99 $18.99 $16.99 $12.99 $14.99 $17.99 PRICE $29.99 $24.99 PRICE $37.99 $24.99 PRICE $24.99 $9.99 Most retailers and distributors carry a full line of tape cassettes. If you wish to order accessories for your P-Touch direct from Brother, please - Brother International PT 1700 | Users Manual - English and Spanish - Page 55
if you prefer to order by telephone. To order by phone, please call Brother International at 1-800-668-2768 and have your Visa or MasterCard available. Stock No. Description Price Quantity Total TOTAL Prices subject to change without notice. Before calling: 1. Review the reverse side of this - Brother International PT 1700 | Users Manual - English and Spanish - Page 56
if you prefer to order by telephone. To order by phone, please call Brother International at 1-800-668-2768 and have your Visa or MasterCard available. Stock No. Description Price Quantity Total TOTAL Prices subject to change without notice. Before calling: 1. Review the reverse side of this - Brother International PT 1700 | Users Manual - English and Spanish - Page 57
GUIA DEL USUARIO - Brother International PT 1700 | Users Manual - English and Spanish - Page 58
en una máquina muy versátil. Aunque esta máquina es fácil de utilizar, le aconsejamos que lea atentamente este manual antes de empezar. Conserve este manual en un lugar de fácil acceso para poderlo consultar cuando sea necesario. ¡Buena suerte! Esperamos que disfrute haciendo hermosas etiquetas - Brother International PT 1700 | Users Manual - English and Spanish - Page 59
ÍNDICE PRECAUCIONES GENERALES 2 ANTES DE EMPEZAR 3 INSERCION DE UN CASSETTE DE CINTA 3 INSERCION DE LAS BATERIAS 4 CAMBIO DE LA CUCHILLA 5 OPERACIONES DE LAS TECLAS 6 CREACION DE UN MENSAJE 7 PANTALLA 7 DESPLAZAMIENTO DEL CURSOR 7 SIMBOLOS 8 EDICION DE - Brother International PT 1700 | Users Manual - English and Spanish - Page 60
cintas TZ Brother con esta máquina. No utilice cintas que no tengan la marca . q Las cintas están disponibles en cuatro anchuras diferentes: 1/4" (6 mm), 3/8" (9 mm), 1/2" (12 mm) y 3/4" (18 mm). q No tire de la cinta. Si lo hiciese podría dañar los cassettes de cinta. q No limpie el P-Touch con - Brother International PT 1700 | Users Manual - English and Spanish - Page 61
ANTES DE EMPEZAR INSERCION DE UN CASSETTE DE CINTA Las cintas TZ Brother están sólo disponibles en las anchuras siguientes para esta máquina: 1/4"(6 mm), 3/8"(9 mm), 1/2"(12 mm) y 3/4"(18 mm). Para insertar un nuevo cassette de cinta: (1) Levante la cubierta del cassette de modo que pueda tener - Brother International PT 1700 | Users Manual - English and Spanish - Page 62
DE LAS BATERIAS La máquina usa seis baterías de tamaño "AA" (AM3, LR6, SUM-3, R6). Para insertar las pilas: (1) Dé la vuelta al P-Touch. Retire la cubierta del compartimento de las baterías presionando el pestillo y levantando la cubierta. (2) Siga los diagramas del fondo del compartimento para - Brother International PT 1700 | Users Manual - English and Spanish - Page 63
de cinta, y cierre la cubierta del compartimiento de la cassette de cinta. ADVERTENCIA: Tenga mucho cuidado en no cortarse cuando reemplace la cuchilla. Nota: La duración aproximada de la cuchilla del P-Touch es de unos 2000 cortes. PRECAUCIÓN • Cuando cambie la unidad de la cuchilla, cerciórese - Brother International PT 1700 | Users Manual - English and Spanish - Page 64
los caracteres de color azul del de color azul de esta máquina. Tecla SHIFT Con la tecla SHIFT puede escribir mayúsculas, y símbolos de la parte superior de las teclas. Para escribir una "A" mayúscula, mantenga presionada la tecla SHIFT y pulse la tecla "A". Para escribir un signo de porcentaje (que - Brother International PT 1700 | Users Manual - English and Spanish - Page 65
ventana que se desplazase a lo largo del mensaje. 1234567890123456789012345678901234567890123456789012345 DESPLAZAMIENTO DEL CURSOR Puede volver a visualizar y editar una parte del mensaje desplazando el cursor hacia adelante y hacia atrás. Para desplazar el cursor a lo largo del mensaje: Pulse - Brother International PT 1700 | Users Manual - English and Spanish - Page 66
3 4 N.˚ de grupo I J K L M N O SIMBOLOS Para entrar un símbolo que no se encuentre en la parte superior de la tecla: (1) Pulse la tecla CODE y la tecla SYMBOL para acceder al modo Symbol. (2) En la pantalla podrá leer; "A-O?". (3) Pulse la tecla del número de A-O cuyo grupo contenga el símbolo - Brother International PT 1700 | Users Manual - English and Spanish - Page 67
EDICION DE UN MENSAJE Para borrar un carácter: (1) Utilice las teclas del cursor para colocar éste un espacio a la derecha del carácter que desea borrar. (2) Presione la tecla DELETE. Para borrar una palabra: (1) Coloque el cursor un espacio a la derecha de la palabra que desee borrar. (2) Mantenga - Brother International PT 1700 | Users Manual - English and Spanish - Page 68
) 1, W2, H2, 4, 8 1/4" (6 mm) 1, W2 q Si ajusta un tamaño de caracteres no mostrado en la tabla anterior y pulsa la tecla PRINT, se visualizará un mensaje de error y no podrá imprimirse la etiqueta. -10- - Brother International PT 1700 | Users Manual - English and Spanish - Page 69
1:Standard Size W2:Double Width H2:Double Height 4:Double Width & Double Height 8:4 × Width & Double Height -11- - Brother International PT 1700 | Users Manual - English and Spanish - Page 70
ESTILO Para elegir un estilo de impresión: Mantenga presionada la tecla CODE y pulse la tecla STYLE el número de veces necesario hasta que en la pantalla aparezca el estilo de caracteres deseado. Si selecciona un estilo que no sea NORMAL, en la pantalla aparecerá el indicador de tal estilo. Nota: - Brother International PT 1700 | Users Manual - English and Spanish - Page 71
SUBRAYADO/ENCUADRE Para añadir un subrayado o un encuadre: Mantenga presionada la tecla CODE y pulse la tecla UNDERLINE/FRAME UNDL/FRM # 3 el número de veces necesario hasta que en la pantalla aparezca el estilo de subrayado/encuadre deseado. Cuando haya establecido el estilo de subrayado/ - Brother International PT 1700 | Users Manual - English and Spanish - Page 72
PRINT. La etiqueta impresa saldrá por la ranura de salida de la cinta de la parte lateral de la máquina. Nota: q No tire de la cinta. q No intente . Para cortar la cinta: Extraiga la palanca de corte de la cinta de la parte lateral de la máquina. Nota: q No extraiga demasiado la palanca de corte de - Brother International PT 1700 | Users Manual - English and Spanish - Page 73
y pulse la tecla REPEAT ( W REPEAT ). (2) Introduzca el número de veces que desee imprimir la etiqueta. (3) Pulse la tecla PRINT. Si ha ajustado TAPE FEED a "#", "##", o "###", pulse las teclas CODE + FEED antes de cortar la cinta. El corte no se realiza automáticamente. CLEAR Nota: q Para - Brother International PT 1700 | Users Manual - English and Spanish - Page 74
y el número especificado aumentará hasta llegar al último número. Si ha ajustado TAPE FEED a "#", "##", o "###", pulse las teclas CODE + FEED antes de cortar la la impresión se inhabilitará, y en la pantalla aparecerá el mensaje "ERR" cuando pulse la tecla PRINT. q Los números aumentarán en uno cada - Brother International PT 1700 | Users Manual - English and Spanish - Page 75
IMPRESION INVERTIDA Esta función imprimirá los caracteres de forma que podrán leerse desde el lado adhesivo de la cinta. Con esta función hay que utilizar una cinta con adhesivo transparente. Mantenga pulsada la tecla CODE y presione la tecla MIRROR ( PRINT MIRROR ) el número de - Brother International PT 1700 | Users Manual - English and Spanish - Page 76
LA CINTA Esta función podrá utilizarse para dejar márgenes iguales en la parte izquierda y derecha de la etiqueta. Los márgenes podrán ajustarse a cuatro ón de cinta : Mantenga presionada la tecla CODE y pulse la tecla TAPE el número de veces necesario hasta que en la pantalla aparezca el - Brother International PT 1700 | Users Manual - English and Spanish - Page 77
. Si el área seleccionada ya está utilizándose, aparecerá un mensaje de error brevemente, y después la pantalla le solicitará que elija un área. En de la tecla y el comienzo del mensaje. Si ha seleccionado un número erróneo, podrá presionar una nueva tecla numérica para hacer que se visualice - Brother International PT 1700 | Users Manual - English and Spanish - Page 78
correspondiente al área que desee borrar. En la pantalla aparecerán el número de la tecla y el comienzo del mensaje. Si ha seleccionado un número erróneo, podrá presionar una nueva tecla numérica para hacer que se visualice la frase correcta. (3) Cuando se visualice el mensaje deseado, pulse la - Brother International PT 1700 | Users Manual - English and Spanish - Page 79
LISTA DE MENSAJES ERR BATT FULL NORM OUTL BOLD SHAD ITAL IT + O IT + B IT + S VERT A-O? 1-9? BIG M: M: TEXT UNDL BOX 1 BOX 2 BOX 3 BOX 4 I: I: Error de entrada. El tipo de cinta seleccionado es incorrecto. Las baterías están débiles o gastadas. Memoria llena (máximo 55 caracteres) o Memoria de - Brother International PT 1700 | Users Manual - English and Spanish - Page 80
no asume ningún tipo de responsabilidad por problemas causados por la utilización de suministros no autorizados. Utilice solamente cintas TZ Brother con esta máquina. No utilice cintas que no tengan la marca . No. de Stock Descripción Cantidad /Paquete Precio Cintas laminadas de 3/4" (18 - Brother International PT 1700 | Users Manual - English and Spanish - Page 81
ón Cantidad /Paquete Precio TZ-SE4 Caracteres negros sobre cinta de seguridad de 3/4" (18 mm) 1 $29.99 TZ-FA3 Caracteres azules en parte de tiendas y distribuidores tienen una línea completa de cintascassettes. Si desea hacer un pedido de accesorios para su P-Touch directamente a Brother - Brother International PT 1700 | Users Manual - English and Spanish - Page 82
THE RIBBON. · TO CUT TAPE, USE THE BUILT-IN CUTTER LEVER. UNDER NO CIRCUMSTANCES ATTEMPT TO CUT THE TAPE WHILE PRINTING OR FEEDING. · INSTALL AND PRESS CODE+FEED. AC adaptor connection · USE THE AC ADAPTOR DESIGNED EXCLUSIVELY FOR THIS MACHINE. - + -+ + - © BROTHER INDUSTRIES, LTD. 1999
®
●
Read this User’s Guide before you start using your P-touch.
●
Keep this User’s Guide in a handy place for future reference.
USER’S GUIDE
PT-1700