Brother International PT2710 Users Manual - English and Spanish
Brother International PT2710 - P-Touch B/W Thermal Transfer Printer Manual
UPC - 012502615569
View all Brother International PT2710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International PT2710 manual content summary:
- Brother International PT2710 | Users Manual - English and Spanish - Page 1
ELECTRONIC LABELING SYSTEM P. 10 - Brother International PT2710 | Users Manual - English and Spanish - Page 2
Brother P-touch labeler Electronic Labeling System Model Number : PT-2700/2710 the instructions, may Machines, Inc. • Microsoft and Windows are registered trademarks of Microsoft Corporation, USA. • Macintosh and Mac OS are registered trademarks of Apple Computer, Inc. • The names of other software - Brother International PT2710 | Users Manual - English and Spanish - Page 3
your issue to our P-touch Customer Service Hotline at 1-877-478-6824 or to a Brother Authorized Service Center within the applicable warranty period. Supply Brother or the Brother Authorized Service Center with a copy of your dated bill of sale showing that the machine was purchased within the - Brother International PT2710 | Users Manual - English and Spanish - Page 4
Items is covered by this warranty and if you first reported the problem to Brother or an Authorized Service Center within the applicable warranty period, Brother or its Authorized Service Center will repair or replace the Machine and/or accompanying Consumable and Accessory Items at no charge to you - Brother International PT2710 | Users Manual - English and Spanish - Page 5
or data related to the use of the machine. Except for that repair or replacement as described above, Brother shall not be liable for any direct, WRITTEN OR ORAL, WHETHER EXPRESSED BY AFFIRMATION, PROMISE, DESCRIPTION, DRAWING, MODEL OR SAMPLE. ANY AND ALL WARRANTIES OTHER THAN THIS ONE, WHETHER - Brother International PT2710 | Users Manual - English and Spanish - Page 6
Brother Product, we have a variety of support options for you to choose from: USA-Customer Service: Customer Service 877-478-6824 (voice) Customer Service purchase (bill of sale) in case your Product requires service. Model Serial Date of purchase Store where purchased Location of store - Brother International PT2710 | Users Manual - English and Spanish - Page 7
Contents INTRODUCTION 4 What You Can Do ...4 Safety Precautions ...6 General Precautions...9 Symbols Used in this Guide 9 Quick Index ...10 GETTING STARTED 11 Unpacking Your P-touch labeler 11 General Description...12 LCD Display & Keyboard 13 LCD Display ...13 Key Names and Functions 14 - Brother International PT2710 | Users Manual - English and Spanish - Page 8
...61 Tape Cutting Options 62 Manual Cutting ...64 Adjusting the Label Length 64 Attaching Labels...65 USING THE FILE MEMORY 66 Storing a Label into Memory 66 Opening a Stored Label File 67 Printing a Stored Label File 68 Deleting a Stored Label File 69 MAINTAINING YOUR P-touch Labeler 70 - Brother International PT2710 | Users Manual - English and Spanish - Page 9
z INTRODUCTION Cleaning the Print Head 70 Cleaning the Tape Cutter 71 TROUBLESHOOTING 72 What to do when...72 Error Messages ...75 APPENDIX 79 Specifications ...79 INDEX ...82 1 2 3 4 5 6 7 8 9 3 - Brother International PT2710 | Users Manual - English and Spanish - Page 10
touch labeler PT-2700/2710. Your new P-touch labeler is an easy to operate, feature packed labeling system that makes creating professional, high quality labels a breeze. In addition to easy label creation via pre-formatted label layouts, the P-touch labeler editing software features advanced label - Brother International PT2710 | Users Manual - English and Spanish - Page 11
the P-touch labeler on. Software Installation Guide Software Installation Guide P. 20 3 Enter the label text using P-touch Quick Editor. Start P-touch Quick Editor. Enter the label text in P-touch Quick Editor. Click on the layout area and then type "Brother". Software Help Software Help - Brother International PT2710 | Users Manual - English and Spanish - Page 12
personal injury or property damage if instructions are ignored. The symbols used in this manual are as follows: symbol indicates Brother will provide fare-paying service whether the duration of the warranty is still valid or not.) Do not drop, hit or otherwise bang the P-touch labeler. Do not touch - Brother International PT2710 | Users Manual - English and Spanish - Page 13
disconnecting the power cord from the 3 labeler when not using the P-touch power outlet. labeler for any extended period of 4 time. Tape Cutter 5 Please note the following to avoid personal injury and damage of the P-touch labeler. 6 Do not touch the blade of the cutter unit. Do not - Brother International PT2710 | Users Manual - English and Spanish - Page 14
failure or repair of the P-touch labeler, or if the battery expires. When power is disconnected for more than two minutes, all text and format settings will be cleared. Any text files stored in the memory and clock settings will also be cleared. Tape Depending on the environmental conditions and - Brother International PT2710 | Users Manual - English and Spanish - Page 15
z INTRODUCTION General Precautions • Do not use the P-touch labeler in any way or for any purpose not described in this guide. Doing so may result in accidents or damage the machine. • Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. • Do not pull or press on - Brother International PT2710 | Users Manual - English and Spanish - Page 16
A B C auto-format function To enter text, symbols and accent characters... Entering text/symbols/accent characters P. 24 To format the label... Text/Label format functions P. 31 To change the cutting and margin settings Tape cutting options P. 62 12345678 12345678 To add time and date to your - Brother International PT2710 | Users Manual - English and Spanish - Page 17
GETTING STARTED Unpacking Your P-touch labeler Check that the package contains the following before using your P-touch labeler. P-touch labeler PT-2700 TZ tape cassette CD-ROM USB cable AC adapter Software Installation Guide User's Guide 1 2 3 4 5 6 7 8 9 11 Unpacking Your P-touch labeler - Brother International PT2710 | Users Manual - English and Spanish - Page 18
Description Tape viewer Tape compartment cover Tape exit slot Tape cassette compartment LCD display Keyboard Print head Tape cutter Release lever When shipped from the factory, the LCD display is covered with a protective sheet to prevent damage. Remove this sheet before using the P-touch. AC - Brother International PT2710 | Users Manual - English and Spanish - Page 19
the beginning of each line, this mark indicates the line number within the label layout. 2. Cursor Indicates the current position of the cursor. New characters character style (7) and frame (8) settings. 1 9. Tape length Indicates the tape length for the text entered. 2 10.Cursor selection - Brother International PT2710 | Users Manual - English and Spanish - Page 20
touch labeler on and off. 2. ( ): • Moves the cursor in the direction of the arrow when entering or editing characters, entering symbols or accented characters, and when setting label preview of the label. • Feeds 0.92" (23 mm) of blank tape and then automatically cuts the tape when used in - Brother International PT2710 | Users Manual - English and Spanish - Page 21
with the key. 12. : 20. : Opens the Setup menu, where you can • Enters the selected date / time to the set operating preferences for the Ptouch labeler. position of the cursor in the text entry screen. 13. ~ : • Use these keys to type letters or numbers. • Uppercase letters and symbols can be - Brother International PT2710 | Users Manual - English and Spanish - Page 22
compartment cover by inserting the three hooks at the bottom into the slots on the machine, then pushing down firmly until it snaps into place. • Remove the batteries if you do not intend to use the P-touch labeler for an extended period of time. • When power is disconnected for more than two - Brother International PT2710 | Users Manual - English and Spanish - Page 23
pull or bend the AC adapter cord. • Use only the AC adapter (AD-60) designed exclusively for your P-touch labeler. Failure to observe this may result in an accident or damage. Brother shall not assume any responsibility for any accident or damage resulting from not using the specified AC adapter - Brother International PT2710 | Users Manual - English and Spanish - Page 24
touch labeler. Use only Brother tape cassettes with the mark. If the new tape cassette has a cardboard stopper, be sure to remove the stopper before inserting the cassette. WATNLATION 1 Check that the end of the tape is not bent and that it passes through the tape guide. End of tape Tape guide - Brother International PT2710 | Users Manual - English and Spanish - Page 25
cassette. Refer to "Feeding Tape" on page 21. • Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape. • Store tape cassettes in a cool dark location, away from direct sunlight and high temperature, high humidity, or dusty locations - Brother International PT2710 | Users Manual - English and Spanish - Page 26
certain time under certain operating conditions. Refer to the Auto PowerOff Time table below for details. • If the batteries are installed or the P-touch labeler is connected to an electrical outlet by the AC adapter, the previous session's information is displayed when the power is turned on. With - Brother International PT2710 | Users Manual - English and Spanish - Page 27
The Feed & Cut function feeds 0.92" (23mm) of blank tape then cuts the tape. • Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette. • Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with - Brother International PT2710 | Users Manual - English and Spanish - Page 28
GETTING STARTED Display Mode You can change the display mode to your preferable style by pressing the key repeatedly. You can select from three text entry screens (guidance + 2 text lines, 3 text lines, guidance + 1 line) and clock display. Text entry screen Clock display guidance + 2 lines 3 - Brother International PT2710 | Users Manual - English and Spanish - Page 29
z GETTING STARTED Setting Language and Unit Language Select the language("English", "Español", "Français", "Português","Deutsch", "Nederlands", "Italiano", "Dansk", "Svenska", "Norsk", or "Suomi") for menu commands and messages shown on the LCD display. The default setting is "English". 1 Press the - Brother International PT2710 | Users Manual - English and Spanish - Page 30
Editing Text Using the keyboard of your P-touch labeler is very similar to using a typewriter tape width. A maximum of 7 lines can be entered for 1" (24mm) tape, 5 lines for 3/4" (18mm) tape, 3 lines for 1/2" (12mm) tape, 2 lines for 3/8" (9mm) and 1/4" (6 mm) tape, and 1 line for 9/64" (3.5mm) tape - Brother International PT2710 | Users Manual - English and Spanish - Page 31
z EDITING A LABEL Inserting Text • To insert additional text into an existing line of position which the tab space will be entered. • To change the length setting of the tab, refer to "Setting Label Attributes" on page 36. • The tab space can also be entered by pressing the key to open the Setup - Brother International PT2710 | Users Manual - English and Spanish - Page 32
EDITING A LABEL Entering Symbols In addition to the symbols available on the keyboard, there are various symbols (including international and extended ASCII characters) available with the symbol - Brother International PT2710 | Users Manual - English and Spanish - Page 33
z EDITING A LABEL Using Symbol Update Function You can create your personal category of symbols by using the Symbol Update Function. The "Personal category" will appear first when - Brother International PT2710 | Users Manual - English and Spanish - Page 34
EDITING A LABEL zSymbol Listz Category Symbols Personal Category Refer to "Using Symbol Update Function" on page mark is strictly governed by one or more European Council directives. Ensure that any labels you produce which use this mark conform with the relevant directives. 28 Entering Symbols - Brother International PT2710 | Users Manual - English and Spanish - Page 35
Entering Accented Characters The P-touch labeler can display and print a set of accented characters such as other language specific characters. 1 Enter the character you wish to change to composite character. Caps - Brother International PT2710 | Users Manual - English and Spanish - Page 36
EDITING A LABEL Character a A c C d D e E g G i I k K l L zAccented Character Listz Accented Characters Character n N o O r R s S t T u U y Y z Z Accented Characters 30 Entering Accented Characters - Brother International PT2710 | Users Manual - English and Spanish - Page 37
. • Small characters may be difficult to read when certain styles are applied (e.g. Shadow + Italic). Setting Character Attributes by Each Line When a label consists two or more lines of text, you can set different value of 1 character attributes (font, size, width, style, line and alignment - Brother International PT2710 | Users Manual - English and Spanish - Page 38
EDITING A LABEL Attribute Font zSetting Optionsz Value Result HEL (Helsinki) BRU (Brussels) US (USA) FLO (Florida) BEL (Belgium) SGO (San Diego) LA (Los Angeles) CAL (Calgary) 32 Setting Character Attributes - Brother International PT2710 | Users Manual - English and Spanish - Page 39
Attribute Size Width Value Auto 48pt 42pt 36pt 24pt 18pt 12pt 9pt 6pt x2 x3/2 x1 x2/3 x1/2 Result When Auto is selected, the text is automatically adjusted to print in the largest size available for each tape width. 1 2 3 4 5 6 7 8 9 33 Setting Character Attributes z EDITING A LABEL - Brother International PT2710 | Users Manual - English and Spanish - Page 40
EDITING A LABEL Attribute Style Line Value Off BLD (Bold) OUT (Outline) SHD (Shadow) SLD (Solid) ITL (Italic) I+BLD (Italic Bold) I+OUT (Italic Outline) I+SHD (Italic Shadow) I+SLD (Italic Solid) VRT (Vertical) Off UND (Underline) STR (Strikeout) 34 Setting Character Attributes Result - Brother International PT2710 | Users Manual - English and Spanish - Page 41
, the text width will be reduced to the size of x1/2 setting. (If further size reduction is required to fit the text into the selected label length, the total text size will be modified after reducing the text width to x1/2 setting.) 1 Press the key to display the Setup menu, Select - Brother International PT2710 | Users Manual - English and Spanish - Page 42
length and tab length. (Cut Options and Length Adjust setting which may be needed when printing a label can also be set by using the key. Refer to "Tape Cutting Options" and "Adjusting the Label Length" on page 62 and 64.) 1 Press the key. The current settings are displayed. 2 Select an attribute - Brother International PT2710 | Users Manual - English and Spanish - Page 43
Attribute Frame zSetting Optionsz Value Result Off 1 2 3 4 5 6 7 8 9 1 2 10 3 11 4 12 5 6 13 7 14 8 15 9 37 Setting Label Attributes z EDITING A LABEL - Brother International PT2710 | Users Manual - English and Spanish - Page 44
setting is 2.0" (50mm). Using Auto-Format Layouts Using the Auto-Format function you can quickly and easily create labels for a variety of purposes, such as file tabs, equipment labels, name badges, etc. Simply select a layout from the templates or block layouts, enter the text and apply formatting - Brother International PT2710 | Users Manual - English and Spanish - Page 45
. 4 10 Select "Print" using the or keys and then press the or key to print the 5 label. • Select "Edit" to change the text data or style settings. 6 • Select "Save" to store the label in a file memory. • Select "Quit" to exit the Auto-Format function. 7 8 9 39 Using Auto-Format Layouts - Brother International PT2710 | Users Manual - English and Spanish - Page 46
the set width for the selected layout, an error message is displayed when you try to print the label. Press the key or any other key to clear the error message, and insert a tape cassette of the correct width. • If the number of characters entered exceeds the limit, an error message is - Brother International PT2710 | Users Manual - English and Spanish - Page 47
12 mm x 42 mm]) Asset Tag Template Name Bin Box (3/4" x 2.7" [18 mm x 70 mm]) (3/4" x 3.0" [18 mm x 76 mm]) Equipment Label 1 (1" x 2.2" [24 mm x 58 mm]) 2 Faceplate (VRT) 3 (1/2" x 2.7" [12 mm x 70 mm]) 4 Cable Wrap 1 5 (1" x 1.5" [24 mm x 39 mm]) 6 7 Cable Wrap 2 8 (3/4" x 1.5" [18 - Brother International PT2710 | Users Manual - English and Spanish - Page 48
EDITING A LABEL Attribute Value Name Badge 1 Name Badge 2 Name Badge 3 Template Name CD Case Spine 1 CD Case Spine 2 VHS Spine MiniDV Spine Details (3/4" x 2.2" [18 mm x 58 mm]) (1/2" x 2.7" [ - Brother International PT2710 | Users Manual - English and Spanish - Page 49
z EDITING A LABEL Using Block Layouts 1 Press the key to display the Auto-Format screen, and then select "Block Layouts" using the or keys. 2 Press the or key to display the Tape Width screen, and then select a tape width using the or keys. 3 Press the or key. When the tape width has not changed, - Brother International PT2710 | Users Manual - English and Spanish - Page 50
the set width for the selected layout, an error message is displayed when you try to print the label. Press the key or any other key to clear the error message, and insert a tape cassette of the correct width. • If the number of characters entered exceeds the limit, an error message is - Brother International PT2710 | Users Manual - English and Spanish - Page 51
z EDITING A LABEL Attribute zBlock Layoutsz Value Details 2LineA 2LineB 3 Line Block layout (1" [24mm] tape) 1+2Line A 1+2Line B 1+3Line 1+4Line 1+5Line 1 2 3 4 5 6 7 8 9 45 Using Auto-Format Layouts - Brother International PT2710 | Users Manual - English and Spanish - Page 52
EDITING A LABEL Attribute Value 2LineA 2LineB 3Line Block layout (3/4" [18 mm] tape) 1+2LineA 1+2LineB 1+3Line 1+4Line 1+5Line 2LineA Block layout (1/2" [12 mm] tape) 2LineB 3Line 1+2Line 46 Using Auto-Format Layouts Details - Brother International PT2710 | Users Manual - English and Spanish - Page 53
z EDITING A LABEL Attribute Block layout (3/8" [9 mm] tape) Block layout (1/4" [6 mm] tape) Value 2LineA 2LineB 1+2Line 1+2Line Details 1 2 3 4 5 6 7 8 9 47 Using Auto-Format Layouts - Brother International PT2710 | Users Manual - English and Spanish - Page 54
Date Function You can add time and date to your label by positioning the cursor on the text screen to the the screen, and also for using the Time & Date function which you can add time/date to your label in desired format. 1 Press the key to display the Setup menu, select "Set Clock" using the or - Brother International PT2710 | Users Manual - English and Spanish - Page 55
& Date Format Setting You can select from various formats of date and time to add to your label. Also, the indication of time can be selected between analog and digital style. The format applied in this setting will also be applied for the - Brother International PT2710 | Users Manual - English and Spanish - Page 56
EDITING A LABEL Attribute D (Date) T (Time) zTime & Date Format Optionsz Value Description 12/31/2099 Month / Date / Year 12 . 31 . 2099 Month . Date . Year 12 - 31 - 2099 Month - - Brother International PT2710 | Users Manual - English and Spanish - Page 57
can select whether to print the date/time of when you press the date/time of when you press the key to add to your label. 1 Press the key to display the Setup menu, select "Time Stamp Setting" using the or keys, and then press the or key. key or the - Brother International PT2710 | Users Manual - English and Spanish - Page 58
Stamp Format] You can select which information to use when adding date and time to your label. Four options (Date, Time, Date and Time or Time and Date) are available. 1 Press the key to display the Setup menu, select "Time Stamp Setting" - Brother International PT2710 | Users Manual - English and Spanish - Page 59
z EDITING A LABEL [Forward] You can select whether to use a forwarded (future) date and time or the current date and time when using the Time & Date Function. 1 Press - Brother International PT2710 | Users Manual - English and Spanish - Page 60
control tags used in an asset management system. • The P-touch labeler is not designed exclusively for creating bar code labels. Always check that bar code labels can be read by the bar code reader. • For best results, print bar code labels in black ink on white tape. Some bar code readers may not - Brother International PT2710 | Users Manual - English and Spanish - Page 61
CODABAR protocols) Entering Bar Code Data 1 Press the key. The Bar Code Input screen is displayed. Up to five bar codes can be entered on a label. 2 Type in the bar code data. Special characters can be entered in the bar code when using the CODE39, CODABAR, CODE128 or EAN128 protocols. When - Brother International PT2710 | Users Manual - English and Spanish - Page 62
EDITING A LABEL • Press the key to return to the previous step. • Refer to the Special Characters List table for a list of all available settings. CODE39 Code 0 1 2 3 4 5 6 18 42 CR 66 FNC3 19 43 SO 67 FNC2 20 44 SI 68 FNC4 21 45 DLE 69 FNC1 56 Creating a Bar Code Label - Brother International PT2710 | Users Manual - English and Spanish - Page 63
z EDITING A LABEL Code Special Character Code Special Character Code Special Code Setup screen. Refer to "Setting Bar Code Parameters" on page 54. • To delete a bar code from a label, position the cursor to right of the bar code marks on the data entry screen and press the key. 1 2 3 4 - Brother International PT2710 | Users Manual - English and Spanish - Page 64
set fewer copies, print labels one at a time, or replace the tape cassette. • Striped tape indicates the end of the tape cassette. If this appears during printing, press the key to turn the P-touch labeler off. Attempting to print with an empty tape cassette may damage the machine. 58 Label Preview - Brother International PT2710 | Users Manual - English and Spanish - Page 65
Copy 1 Make sure that the appropriate tape cassette is inserted and ready for printing. 2 Press the key. The message shown on the right is displayed while the label is being printed. To stop printing, press the key to turn off the P-touch labeler. There are several other messages that may - Brother International PT2710 | Users Manual - English and Spanish - Page 66
Using the numbering function you can create a set of sequentially numbered labels from a single label format. 1 Make sure that the appropriate tape cassette is inserted and ready for printing. 2 Hold down the key and press the key to display the print options screen, and then select "Numbering - Brother International PT2710 | Users Manual - English and Spanish - Page 67
z LABEL PRINTING • Press the key to return to the previous step. • Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to "Tape Cutting Options" on page 62 to change this setting. • The figures shown on the screen during printing indicate the "count / number of - Brother International PT2710 | Users Manual - English and Spanish - Page 68
• The copy and auto-numbering functions cannot be used together with the mirror printing function. Tape Cutting Options The tape cutting options allow you to specify how the tape is fed and cut when printing labels. In particular, the "Chain" and "No Cut" options greatly reduce the amount of wasted - Brother International PT2710 | Users Manual - English and Spanish - Page 69
ABC 1.06" 0.31" 4 printed. (27 mm) (8 mm) 5 • When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, refer to "Manual Cutting" on page 64 to apply the appropriate setting. 6 • The tape is not cut after the last label is printed when "Chain" or "No Cut" is set. Hold down the key - Brother International PT2710 | Users Manual - English and Spanish - Page 70
LABEL PRINTING Manual Cutting When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, set "On" for Manual Cutting before printing. After printing, remove the tape cassette from the machine and use scissors to cut the tape. 1 Press the key to display the setup menu, select "Manual Cutting" - Brother International PT2710 | Users Manual - English and Spanish - Page 71
easier to peel the backing. • Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel off easily from these surfaces. • Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive Tapes or other special tapes and observe all - Brother International PT2710 | Users Manual - English and Spanish - Page 72
your stored files if the AC adapter is disconnected and the batteries are removed for more than one minute. Storing a Label into Memory 1 After entering the text and formatting the label, press the key to display the File screen. 2 Select "Save" using the or keys. 3 Press the or key. A file number - Brother International PT2710 | Users Manual - English and Spanish - Page 73
to display the File screen. 2 Select "Open" using the or keys. 3 Press the or key. The file number of a stored label is displayed. The label text is also displayed to identify the label. 4 Select a file number using the or key, and then press the or key to open the selected file. The file - Brother International PT2710 | Users Manual - English and Spanish - Page 74
Press the or key. The file number of a stored label is displayed. The label text is also displayed to identify the label. 4 Select a file number using the or key, and then press the , or key to print the selected label. The label is printed from the machine. • Press the key to return to the previous - Brother International PT2710 | Users Manual - English and Spanish - Page 75
to display the File screen. 2 Select "Delete" using the or keys. 3 Press the or key. The file number of a stored label is displayed. The label text is also displayed to identify the label. 4 Select a file number using the or key, and then press the or key. The message "Delete?" is displayed. 5 Press - Brother International PT2710 | Users Manual - English and Spanish - Page 76
, and clock settings will also be cleared. Maintenance Your P-touch labeler should be cleaned on a regular basis to maintain its performance and life span. Always remove the batteries and disconnect the AC adapter before cleaning the P-touch labeler. Cleaning the Main Unit Wipe any dust and marks - Brother International PT2710 | Users Manual - English and Spanish - Page 77
P-touch Labeler Cleaning the Tape Cutter Tape adhesive can build up on the cutter blade after repeated use, taking the edge off the blade which may result in the tape jamming in the cutter. • About once every year, wipe the cutter blade using a cotton swab moistened with alcohol. • Do not touch - Brother International PT2710 | Users Manual - English and Spanish - Page 78
TROUBLESHOOTING What to do when... Problem The screen 'locks', or the P-touch labeler does not respond normally. The display remains blank after turning on the power. The LCD messages are displayed in a foreign language. The label is not printed after pressing the key. Cause Solution Refer to " - Brother International PT2710 | Users Manual - English and Spanish - Page 79
z TROUBLESHOOTING Problem The label is not printed correctly. The ink ribbon is separated from the ink roller. Cause Solution Is the tape cassette installed When installing a cassette, correctly? press firmly until it clicks into place. Is the print head clean? If not, clean the print head - Brother International PT2710 | Users Manual - English and Spanish - Page 80
TROUBLESHOOTING Problem The label is not cut automatically. Label files saved previously are now empty. Cause Solution Is Cut Option set to Chain or No Cut? When these options are set, the tape is not fed after printing the label. Check the Cut Option setting, or hold down the key and press - Brother International PT2710 | Users Manual - English and Spanish - Page 81
z TROUBLESHOOTING Error Messages When an error message appears on the display, for your P-touch labeler. The tape cutter is closed when you try to print or feed tape. Turn the P-touch labeler off and then on again before continuing. When tape is tangled in the cutter, remove the tape. There is - Brother International PT2710 | Users Manual - English and Spanish - Page 82
39.37" (1 m). Edit the text so that the length of the label is less than 39.37" (1 m). An 1"(24mm) tape cassette is not installed when an AutoFormat for 1"(24mm) tape is selected. Install an 1"(24mm) tape cassette. An 3/4" (18 mm) tape cassette is not installed when an AutoFormat for 3/4" (18 mm - Brother International PT2710 | Users Manual - English and Spanish - Page 83
z TROUBLESHOOTING Message Cause/Remedy A 1/2" (12 mm) tape cassette is not installed when an AutoFormat for 1/2" (12 mm) tape is selected. Install a 1/2" (12 mm) tape cassette. A 3/8" (9 mm) tape cassette is not installed when an AutoFormat for 3/8" (9 mm) tape is selected. Install a 3/8" (9 mm) - Brother International PT2710 | Users Manual - English and Spanish - Page 84
TROUBLESHOOTING Message Cause/Remedy The text size is too large. Select a different size option. There is not enough internal memory available when you try to save a label file. Delete any unnecessary files to make more memory available for the new label file. The number of digits entered in the - Brother International PT2710 | Users Manual - English and Spanish - Page 85
light display Yes Printing Print method Thermal printer Print head 128 dot / 180 dpi Print height 0.71" (18.1mm) max. (when using 1" (24mm) tape) Print speed Approx. 0.39" (10 mm) / sec. Tape cassette Standard TZ tape cassette (9/64", 3/8", 1/2", 3/4", 1" [3.5, 6, 9, 12, 18, 24 mm] widths - Brother International PT2710 | Users Manual - English and Spanish - Page 86
batteries (LR6). Battery: 5 min.*, AC adapter: 8 hours *When using P-touch labeler only. When connected to a PC, 1 hour. 7.06"(W) x 9.75" (D) x 2.82" (H) [179.5mm (W) x 247.9mm (D) x 71.8mm (H)] 1.87lb (850g) (without tape cassette and batteries) 50 ~ 95°F / 20 ~ 80% humidity (without condensation - Brother International PT2710 | Users Manual - English and Spanish - Page 87
for installation Operating Environment: Macintosh Item Specification OS Memory Mac OS® X 10.1 - 10.4.4 Mac OS® X 9.1 - 9.X* (*For Mac OS® 9.1 - 9.X, visit our web site http://solutions.brother.com for software and driver download.) 32MB or more required 1 Hard disk Monitor Interface Other - Brother International PT2710 | Users Manual - English and Spanish - Page 88
fonts 32 formatting character attributes 31 label attributes 36 K Keyboard 13 L length 36 line 31 Line number 13 M Manual Cutting 64 N new line 24 P Power Supply 16 R Return mark 13 S size 31 style 31 Symbol List 28 symbols 26 T tape cassettes 18 tape - Brother International PT2710 | Users Manual - English and Spanish - Page 89
operational assistance you may call Brother Customer Service at: Voice 1-877-4-PTouch, or Fax 1-901-379-1210 Assistance on the Internet For product information and downloading the latest drivers: http://www.brother.com For purchasing accessories and certain Brother products: http://www.brothermall - Brother International PT2710 | Users Manual - English and Spanish - Page 90
- Brother International PT2710 | Users Manual - English and Spanish - Page 91
ELECTRONIC LABELING SYSTEM P. 10 MANTENIMIENTO DE SU Etiquetadora P-touch - Brother International PT2710 | Users Manual - English and Spanish - Page 92
TEL: (908) 704-1700 declara que el producto Nombre del producto: Sistema de etiquetado electrónico P-touch de Brother Número de modelo: PT-2700/2710 Este dispositivo cumple con la Parte 15 de la normativa de la FCC. El funcionamiento está sujeto a las dos condiciones siguientes: (1) este dispositivo - Brother International PT2710 | Users Manual - English and Spanish - Page 93
a nuestra Línea directa de atención al cliente de P-touch llamando al número 1-877-478-6824 o a un Centro de servicio autorizado de Brother dentro del periodo de garantía aplicable. Presente a Brother, o al centro de servicio autorizado de Brother, una copia de la factura de venta fechada donde se - Brother International PT2710 | Users Manual - English and Spanish - Page 94
prepagado suministrado por Brother de acuerdo con las instrucciones indicadas por Brother. El usuario dispondrá de dos equipos, por ello, Brother exigirá que le proporcione el número de una tarjeta de crédito válida. Brother emitirá un cargo contra ese número de cuenta de la tarjeta de crédito hasta - Brother International PT2710 | Users Manual - English and Spanish - Page 95
derechos adicionales en función del estado donde se encuentre. • Esta garantía limitada (y la obligación de Brother para con el usuario) no puede modificarse de ninguna forma a menos que el usuario y Brother firmen el mismo documento en el que (1) se haga referencia a esta máquina y la factura con - Brother International PT2710 | Users Manual - English and Spanish - Page 96
Si usted tiene alguna pregunta o necesita información acerca de su producto Brother, le ofrecemos una variedad de opciones entre las cuales puede elegir: Servicio al cliente en Estados Unidos: Customer Service 877-478-6824 (voz) Customer Service 901-379-1210 (fax) Respuesta automática por fax - Brother International PT2710 | Users Manual - English and Spanish - Page 97
...10 PARA EMPEZAR 11 Desembalaje de la etiquetadora P-touch 11 Descripción general...12 Pantalla LCD y teclado 13 Pantalla LCD...13 Funciones y nombre de las teclas 14 Alimentación eléctrica 16 Baterías...16 Adaptador de CA 17 Instalación de un cartucho de cinta 18 Encendido y apagado 20 - Brother International PT2710 | Users Manual - English and Spanish - Page 98
61 Opciones de corte de cinta 62 Corte manual...64 Ajuste de la longitud de la etiqueta 64 Colocación de etiquetas 65 UTILIZACIÓN DE LA MEMORIA DE ARCHIVOS 66 Almacenamiento de etiquetas en la memoria 66 Apertura de un archivo de etiqueta almacenado 67 Impresión de un archivo de etiqueta - Brother International PT2710 | Users Manual - English and Spanish - Page 99
z INTRODUCCIÓN Limpieza del cabezal de impresión 71 Limpieza de la cortadora de cinta 71 SOLUCIÓN DE PROBLEMAS 72 Qué hay que hacer cuando 72 Mensajes de error ...76 APÉNDICE 80 Especificaciones...80 ÍNDICE 83 1 2 3 4 5 6 7 8 9 3 - Brother International PT2710 | Users Manual - English and Spanish - Page 100
por adquirir la etiquetadora P-touch PT-2700/2710. Su nueva etiquetadora P-touch es un sistema de etiquetado fácil de utilizar y con numerosas funciones que simplifica al máximo la creación de etiquetas profesionales de gran calidad. Además de la sencilla creación de etiquetas mediante diseños - Brother International PT2710 | Users Manual - English and Spanish - Page 101
en el área de creación de diseño y escriba "Brother". Ayuda del software Ayuda del software 4 Imprima la etiqueta. Haga clic en el botón "Imprimir". La etiqueta se imprimirá. 1 2 Ayuda del software Ayuda del software 3 4 P-touch Quick Editor (software de edición de etiquetas sencillas) es - Brother International PT2710 | Users Manual - English and Spanish - Page 102
adquirió la etiquetadora P-touch o con el centro de servicio autorizado de su localidad. (Si los daños fueron causados porque el cliente intentó desarmar o modificar la etiquetadora, Brother prestará servicios sujetos al pago de tarifas, independientemente de la vigencia de la garantía.) No deje - Brother International PT2710 | Users Manual - English and Spanish - Page 103
ías si no piensa usar la etiquetadora P-touch durante un 2 extenso período de tiempo. 3 Asegúrese de desenchufar el adaptador Para desenchufar el cable de 4 de CA de la toma de alimentación y la alimentación de la toma eléctrica, tire etiquetadora P-touch si no va a utilizar la siempre del - Brother International PT2710 | Users Manual - English and Spanish - Page 104
se produce una avería o si se repara la etiquetadora P-touch, o si se agotan sus baterías. Si se desconecta el suministro eléctrico durante más de 2 minutos, se borrarán todos los ajustes de texto y formato. También se borrarán todos los archivos de texto guardados en la memoria y los ajustes del - Brother International PT2710 | Users Manual - English and Spanish - Page 105
touch de manera o para fines distintos a los descritos en esta guía. Si lo hace, podrían producirse accidentes o dañar el equipo. • Utilice únicamente cintas Brother . • El software incluido en el CD-ROM está diseñado para utilizarlo con la etiquetadora Ptouch y se puede instalar en más de una PC. - Brother International PT2710 | Users Manual - English and Spanish - Page 106
tarea aquí debajo y, a continuación, ir a la página indicada. Si no encuentra aquí la tarea que está buscando, intente encontrarla en el índice o en el contenido de la guía. Guía rápida ABC A B C a u to -fo rm a t fu n c tio n Para introducir texto, símbolos y caracteres acentuados... Introducci - Brother International PT2710 | Users Manual - English and Spanish - Page 107
que el paquete contiene los siguientes elementos antes de utilizar la etiquetadora P-touch. Etiquetadora P-touch PT-2700 Cartucho de cinta TZ CD-ROM Cable USB Adaptador de CA Guía de usuario Guía de instalación del software 1 2 3 4 5 6 7 8 9 11 Desembalaje de la etiquetadora P-touch - Brother International PT2710 | Users Manual - English and Spanish - Page 108
Cabezal de Cortadora impresión Palanca de de cinta liberación Cuando se recibe de fábrica, la pantalla LCD está cubierta por una lámina protectora para evitar daños. Quite dicha lámina antes de utilizar la etiquetadora P-touch. Conector del Tapa del compartimiento adaptador de CA de bater - Brother International PT2710 | Users Manual - English and Spanish - Page 109
del cursor se borra cuando se oprime la tecla . 3. Marca de retorno Indica el final de una línea de texto. 4. Modo "Caps" (Bloqueo de mayúsculas) Indica que el modo Caps está activado. 5.~8. Guía de estilo Indica la configuración actual de la fuente (5), el tamaño (6) del caracter, el estilo - Brother International PT2710 | Users Manual - English and Spanish - Page 110
Enciende y apaga la etiquetadora P-touch. 2. ( ): • Desplaza el cursor en la dirección de la flecha cuando se introducen o editan caracteres, cuando se introducen símbolos o caracteres acentuados, y cuando se configuran los atributos de la etiqueta en los menús de funciones. • Al establecer la - Brother International PT2710 | Users Manual - English and Spanish - Page 111
combinación con la tecla . • Introduce una línea nueva durante la 11. : Abre el menú "Label" (Etiqueta), en el que se pueden establecer los atributos de etiqueta para la etiqueta en cuestión. introducción de texto. • Introduce un nuevo bloque si se utiliza en combinación con la tecla . 20. : 12 - Brother International PT2710 | Users Manual - English and Spanish - Page 112
baterías si no piensa usar la etiquetadora P-touch durante un extenso período de tiempo. • Si se desconecta el suministro eléctrico durante más de 2 minutos, se borrarán todos los ajustes de texto y formato. También se borrarán todos los archivos de texto guardados en la memoria y los ajustes del - Brother International PT2710 | Users Manual - English and Spanish - Page 113
tire del cable del adaptador de CA ni lo doble. • Utilice sólo el adaptador de CA (AD-60) diseñado exclusivamente para su etiquetadora P-touch. Si no se siguen estas indicaciones, podrían ocurrir accidentes o daños. Brother no asume responsabilidad alguna en caso de accidentes o daños causados - Brother International PT2710 | Users Manual - English and Spanish - Page 114
de cinta En la etiquetadora P-touch se pueden utilizar cartuchos de 9/64", 1/4", 3/8", 1/2", 3/4" o 1" (3.5mm, 6mm, 9mm, 12mm, 18mm o 24mm) de ancho. Utilice únicamente casetes de cinta Brother que lleven la marca . Si el cartucho nuevo tiene algún tipo de protección de cartón, asegúrese de - Brother International PT2710 | Users Manual - English and Spanish - Page 115
quede holgura alguna en ella ni en la cinta de tinta después de introducir el cartucho de cinta. Consulte la sección "Avance de la cinta" en la página 21. • No tire de la etiqueta que sale por la ranura de salida de la cinta. Si lo hace, la cinta de tinta saldrá expulsada junto con la propia cinta - Brother International PT2710 | Users Manual - English and Spanish - Page 116
PARA EMPEZAR Encendido y apagado Oprima la tecla para encender la etiquetadora P-touch. Vuelva a oprimir la tecla para apagar la etiquetadora P-touch. • Su etiquetadora P-touch tiene una función de ahorro de energía con la que se apaga automáticamente si no se oprime alguna tecla durante un - Brother International PT2710 | Users Manual - English and Spanish - Page 117
ella ni en la cinta de tinta después de introducir el cartucho de cinta. • No tire de la etiqueta que sale por la ranura de salida de la cinta de etiquetas. Si lo hace, la cinta de tinta saldrá expulsada junto con la propia cinta de etiquetas. • No bloquee la ranura de salida de la cinta durante el - Brother International PT2710 | Users Manual - English and Spanish - Page 118
neas 3 líneas guía + 1 línea • Usted también puede cambiar la pantalla del reloj pasando a la pantalla de introducción de texto (guía + 2 líneas de texto) oprimiendo cualquier otra tecla en el teclado además de la tecla y . • Para ajustar el reloj a la fecha y la hora actuales, consulte la secci - Brother International PT2710 | Users Manual - English and Spanish - Page 119
por defecto es "English". 1 Oprima la tecla para mostrar el menú de Configuración, seleccione "Language" (Idioma) oprimiendo la tecla o y seguidamente oprima defecto es "pulgadas". 1 Oprima la tecla para mostrar el menú de 1 Configuración, seleccione "Unidad" oprimiendo la 2 tecla o la tecla - Brother International PT2710 | Users Manual - English and Spanish - Page 120
texto La utilización del teclado de la etiquetadora P-touch es muy similar a como se utiliza el teclado de una máquina de escribir, un procesador de textos o una computadora. Introducción de texto mediante el teclado • Para introducir una letra en minúscula o un número, basta con oprimir la tecla - Brother International PT2710 | Users Manual - English and Spanish - Page 121
el texto adicional. El texto nuevo se insertará a la izquierda del cursor. Para insertar una tabulación • Para insertar un espacio de tabulación entre la línea de texto existente, lleve el cursor donde desea añadir la tabulación y oprima la tecla . Aparece una marca para indicar la posición donde - Brother International PT2710 | Users Manual - English and Spanish - Page 122
símbolos, mantenga oprimida la tecla y, a continuación, oprima la tecla deseada. Introducción de símbolos con la función de símbolos 1 Oprima la tecla . Aparecerá una lista de categorías de símbolos y símbolos de esa categoría. El último símbolo introducido se selecciona en la lista que aparece - Brother International PT2710 | Users Manual - English and Spanish - Page 123
o la tecla para aplicar el ajuste. La pantalla regresa a la pantalla de introducción de texto. 4 Introduzca el símbolo que desea añadir a su categoría Personal. Consulte la sección "Introducción de símbolos con la función de símbolos" en la página 26 donde encontrará mayores detalles. 5 Oprima la - Brother International PT2710 | Users Manual - English and Spanish - Page 124
Paréntesis Flecha Unidad Internacional Número Pictograma Electricidad Otros zLista de símbolosz Símbolos Consulte la sección "Uso de la función de Actualización de símbolos" en la página 27 donde encontrará los detalles. El uso de la marca CE está regulado rigurosamente por una o más directivas - Brother International PT2710 | Users Manual - English and Spanish - Page 125
ÓN DE ETIQUETAS Introducción de caracteres acentuados La etiquetadora P-touch puede mostrar e imprimir una serie de caracteres acentuados como es el caso de los caracteres específicos de otros idiomas. 1 Introduzca el caracter que desea cambiar a un caracter compuesto. El modo "Caps" (Bloqueo de - Brother International PT2710 | Users Manual - English and Spanish - Page 126
EDICIÓN DE ETIQUETAS caracter a A c C d D e E g G i I k K l L zLista de caracteres acentuadosz Caracteres acentuados caracter n N o O r R s S t T u U y Y z Z Caracteres acentuados 30 Introducción de caracteres acentuados - Brother International PT2710 | Users Manual - English and Spanish - Page 127
atributos. ( en la pantalla indica que ahora está 6 aplicando el atributo sólo para esa línea específica). 7 Cuando se establezca un valor diferente de atributo para cada 8 línea, el valor se mostrará como **** al oprimir la tecla . Al cambiar el ajuste en esta pantalla oprimiendo las teclas - Brother International PT2710 | Users Manual - English and Spanish - Page 128
EDICIÓN DE ETIQUETAS Atributo Fuente zOpciones de configuraciónz Valor Resultado HEL (Helsinki) BRU (Bruselas) US (USA) FLO (Florida) BEL (Bélgica) SGO (San Diego) LA (Los Angeles) CAL (Calgary) 32 Configuración de los atributos de caracteres - Brother International PT2710 | Users Manual - English and Spanish - Page 129
x2 x3/2 x1 x2/3 x1/2 Resultado Al seleccionar Auto, el texto se ajusta automáticamente para imprimirse con el mayor tamaño disponible para cada ancho de cinta. 1 2 3 4 5 6 7 8 9 33 Configuración de los atributos de caracteres z EDICIÓN DE ETIQUETAS - Brother International PT2710 | Users Manual - English and Spanish - Page 130
EDICIÓN DE ETIQUETAS Atributo Estilo Línea Valor Apgdo (desactivado) Negrt (Negrita) Contr (Perfilado) Sombra (Sombreado) Sólido sombreada) C+Sól (Cursiva sólida) Vertcl (Vertical) Apgdo (desactivado) Subray (Subrayado) Tachd (Tachado) 34 Configuración de los atributos de caracteres Resultado - Brother International PT2710 | Users Manual - English and Spanish - Page 131
automático Si "Tamaño" se ajusta a "Auto" y "Longitud" se ajusta a una longitud específica, usted puede seleccionar la forma de reducir el tamaño del texto para adaptarlo a la longitud de la etiqueta. Si se selecciona "Tamaño del texto", el tamaño total del texto se modifica para encajarlo dentro - Brother International PT2710 | Users Manual - English and Spanish - Page 132
al imprimir una etiqueta también se pueden ajustar oprimiendo la tecla . Consulte la sección "Opciones de corte de cinta" y "Ajuste de la longitud de la etiqueta" , Configuración de ajuste de longitud, en página 62 y 64.) 1 Oprima la tecla . Los valores configurados actuales aparecen en pantalla - Brother International PT2710 | Users Manual - English and Spanish - Page 133
Atributo Marco zOpciones de configuraciónz Valor Resultado Apgdo 1 2 3 4 5 6 7 8 9 1 2 10 3 11 4 12 5 6 13 7 14 8 15 9 37 Configuración de los atributos de etiqueta z EDICIÓN DE ETIQUETAS - Brother International PT2710 | Users Manual - English and Spanish - Page 134
texto y aplicar el formato deseado. También puede utilizar símbolos y caracteres acentuados en los diseños de formato automático. Utilización de plantillas; ejemplo de creación de una Etiqueta de activos 1 Oprima la tecla para que aparezca la pantalla Auto-Format (Formato automático) y, a continuaci - Brother International PT2710 | Users Manual - English and Spanish - Page 135
mayúsculas) para introducir texto. 2 9 Introduzca el texto y seguidamente oprima la tecla o . 3 Repita este proceso para cada campo de texto. Después de haber introducido texto en todos los campos, 4 aparece el menú Imprimir si se oprime la tecla o . 5 10 Seleccione "Imprimir" oprimiendo la - Brother International PT2710 | Users Manual - English and Spanish - Page 136
para borrar todo el texto u oprima la tecla para no borrar el archivo. • Para imprimir múltiples copias, numeradas secuencialmente, o una imagen espejo de la etiqueta, acceda al menú de impresión, mantenga oprimida la tecla y oprima la tecla para que aparezca el menú "Print Options" (Opciones - Brother International PT2710 | Users Manual - English and Spanish - Page 137
carpeta (1" x 8.6" [24 mm x 219 mm]) Lomo 2 de carpeta (3/4" x 8.6" [18mm x 219mm]) Pestaña de archivador (1/2" x 3.2" [12 mm x 82 mm]) Pestaña de divisor (1/2" x 1.6" [12 mm x 42 mm]) Nombre de la plantilla Etiqueta de inventario Bandejas (3/4" x 2.7" [18 mm x 70 mm]) (3/4" x 3.0" [18 mm - Brother International PT2710 | Users Manual - English and Spanish - Page 138
Atributo Valor Etiqueta 1 de nombre Etiqueta 2 de nombre Etiqueta 3 de nombre Nombre de la plantilla Dorso caja CD 1 Dorso caja CD 2 Dorso de VHS Dorso MiniDV Detalles (3/4" x 2.2" [18 mm x 58 mm]) (1/2" x 2.7" [12 mm x 70 mm]) (1/2" x 2.6" [12 mm x 66 mm]) (1/4" x 4.4" [6 mm x 113 - Brother International PT2710 | Users Manual - English and Spanish - Page 139
2 seleccionado recupere su valor por defecto. 3 7 Oprima la tecla o . Aparece la pantalla de introducción de texto para el 4 diseño de bloque. Puede utilizar el modo "Caps" (Bloqueo de 5 mayúsculas) para introducir texto. 6 8 Introduzca el texto deseado y, a continuación, oprima la - Brother International PT2710 | Users Manual - English and Spanish - Page 140
ño" para utilizar un diseño distinto. • Oprima la tecla para regresar al paso anterior. • Consulte la tabla Diseños de bloques para obtener una lista con todos los diseños de bloques disponibles. • Aparecerá el mensaje "¿Borrar todo el texto?" si oprime la tecla mientras mantiene oprimida la tecla - Brother International PT2710 | Users Manual - English and Spanish - Page 141
Atributo Diseño de bloques (cinta de 1" [24mm]) zDiseños de bloquesz Valor Detalles 2LíneasA 2LíneasB 3Líneas 1+2LineasA 1+2LíneasB 1+3Líneas 1+4Líneas 1+5Líneas 1 2 3 4 5 6 7 8 9 45 Utilización de diseños de formato automático z EDICIÓN DE ETIQUETAS - Brother International PT2710 | Users Manual - English and Spanish - Page 142
EDICIÓN DE ETIQUETAS Atributo Valor 2LíneasA 2LíneasB 3Líneas Diseño de bloques (cinta de 3/4" [18 mm]) 1+2LineasA 1+2LíneasB 1+3Líneas 1+4Líneas 1+5Líneas 2LíneasA Diseño de bloques (cinta de 1/2" [12 mm]) 2LíneasB 3Líneas 1+2Lineas Detalles 46 Utilización de diseños de formato autom - Brother International PT2710 | Users Manual - English and Spanish - Page 143
z EDICIÓN DE ETIQUETAS Atributo Diseño de bloques (cinta de 3/8" [9 mm]) Diseño de bloques (cinta de 1/4" [6 mm]) Valor 2LíneasA 2LíneasB 1+2Lineas 1+2Lineas Detalles 1 2 3 4 5 6 7 8 9 47 Utilización de diseños de formato automático - Brother International PT2710 | Users Manual - English and Spanish - Page 144
utilizando la tecla o la tecla . Para pasar al siguiente parámetro, oprima la tecla o la tecla . Usted también puede usar las teclas Num (Bloque de números) para escribir los números. 3 Oprima la tecla o para aplicar los ajustes. • Oprima la tecla para regresar al paso anterior. • Oprima la tecla - Brother International PT2710 | Users Manual - English and Spanish - Page 145
aparece en la pantalla al oprimir la tecla . (Consulte la sección "Modo de pantalla" en la página 22 donde encontrará los detalles.) 1 Oprima la la tecla y seguidamente oprima la tecla o la tecla . 2 Aparece la pantalla de Formato hora fecha. Seleccione la fecha o la hora con la tecla o la tecla - Brother International PT2710 | Users Manual - English and Spanish - Page 146
Atributo F (Fecha) H (Hora) zOpciones de formato de hora y fechaz Valor Descripción 12/31/2099 Mes / Día / Año 12 . 31 . 2099 Mes . Día 59 digital La fecha y la hora que se usan como valores son ajustes de muestra. Al seleccionar un formato, la fecha y la hora ajustadas en el reloj aparecer - Brother International PT2710 | Users Manual - English and Spanish - Page 147
. 1 Oprima la tecla para mostrar el menú Configuración, seleccione "Ajustar marca de hora" con la tecla o la tecla y seguidamente oprima la tecla o la en el lugar donde se encuentre el icono del reloj en el diseño de la 3 etiqueta. Oprima la tecla ; se insertará la fecha/hora 4 actuales - Brother International PT2710 | Users Manual - English and Spanish - Page 148
paso anterior. • Oprima la tecla para utilizar el valor por defecto. • Consulte la sección Sello de hora: Opciones de Formato donde encontrará los ajustes disponibles. zSello de hora : Opciones de formatoz Atributo Valor Descripción Fecha Sólo se imprimirá la fecha en la etiqueta. Formato - Brother International PT2710 | Users Manual - English and Spanish - Page 149
con la tecla o la tecla . Para pasar al siguiente parámetro, oprima la tecla o la tecla . • Usted también puede usar las teclas Num (Bloque de números) para escribir los números. 4 Oprima la tecla o la tecla para aplicar los ajustes. • Oprima la tecla para regresar al paso anterior. 1 • Oprima la - Brother International PT2710 | Users Manual - English and Spanish - Page 150
se pueden utilizar en cajas registradoras, sistemas de control de existencias u otros sistemas de lectura de códigos de barras, o incluso, las etiquetas de control de activos utilizadas en los sistemas de administración de activos. • La etiquetadora P-touch no está diseñada exclusivamente para crear - Brother International PT2710 | Users Manual - English and Spanish - Page 151
CODABAR, CODE128 o EAN128. Si no va a utilizar ningún caracter especial, continúe en el paso 5. 2 3 Oprima la tecla . Aparecerá una lista de los caracteres disponibles 3 para el protocolo actual. 4 4 Seleccione un caracter oprimiendo la tecla o la 5 tecla , seguidamente oprima la tecla o la - Brother International PT2710 | Users Manual - English and Spanish - Page 152
para regresar al paso anterior. • Consulte la tabla Lista de caracteres especiales para obtener una lista de todos los valores disponibles. CODE39 Código 0 1 2 3 zLista de caracteres especialesz CODABAR Caracter especial Código Caracter especial 0 1 (ESPACIO) 2 3 4 4 5 5 6 CODE128 - Brother International PT2710 | Users Manual - English and Spanish - Page 153
ón de los parámetros de códigos de barras" en la página 54. • Para eliminar un código de barras de una etiqueta, coloque el cursor a la derecha de las marcas de código de barras de la pantalla de introducción de datos y oprima la tecla . 1 2 3 4 5 6 7 8 9 57 Creación de una etiqueta de código de - Brother International PT2710 | Users Manual - English and Spanish - Page 154
etiqueta real cuando se imprime. Impresión de etiquetas Después de introducir el texto y el formato de la etiqueta, usted ya puede imprimir la etiqueta. Además de imprimir una sola copia de una etiqueta, su etiquetadora P-touch tiene varias funciones de impresión que le permiten imprimir múltiples - Brother International PT2710 | Users Manual - English and Spanish - Page 155
impresión, oprima la tecla y apague la etiquetadora P-touch. Puede aparecer otra serie de mensajes si se oprime la tecla . Consulte "Mensajes de error" en la página 76 y compruebe el significado de cualquier mensaje que aparezca. Impresión de múltiples copias Esta función le permite imprimir hasta - Brother International PT2710 | Users Manual - English and Spanish - Page 156
van a imprimir con la tecla o la tecla , o escriba el número con las teclas numéricas. Mantenga oprimida la tecla o la tecla para cambiar el número de etiquetas con mayor rapidez. 7 Oprima la tecla o . Se imprimirán las etiquetas. A medida que se va imprimiendo cada etiqueta, se muestra el número - Brother International PT2710 | Users Manual - English and Spanish - Page 157
la tecla para regresar al paso anterior. • A menos que se indique lo contrario, la cinta se corta automáticamente después de imprimir cada copia. Consulte la sección "Opciones de corte de cinta" en la página 62 donde se explica cómo cambiar esta configuración. • Las cifras que se muestran en la - Brother International PT2710 | Users Manual - English and Spanish - Page 158
cinta desperdiciada ya que utilizan unos márgenes más pequeños y eliminan el corte de las secciones blancas entre las etiquetas. 1 Oprima la tecla (Etiqueta). para mostrar el menú Label 2 Seleccione "Op. corte" oprimiendo la tecla o la tecla y seguidamente ajuste el valor oprimiendo la tecla o la - Brother International PT2710 | Users Manual - English and Spanish - Page 159
corta la última etiqueta impresa. ABC ABC 1.06" 0.31" 4 (27 mm) (8 mm) 5 • Cuando vaya a trabajar con cintas de tela para transferencias o cintas adhesivas extra 6 fuertes, consulte la sección "Corte manual" en la página 64 para aplicar el ajuste oportuno. 7 • La cinta no se corta despu - Brother International PT2710 | Users Manual - English and Spanish - Page 160
, defina "Activado" para la función de Corte manual antes de iniciar la impresión. Después de imprimir, retire el cartucho de la máquina y corte la cinta con unas tijeras. 1 Oprima la tecla para mostrar el menú de configuración, seleccione "Corte manual" oprimiendo la tecla o la tecla y seguidamente - Brother International PT2710 | Users Manual - English and Spanish - Page 161
deseadas, etc. 2 Quite la lámina protectora que cubre la parte trasera de la etiqueta. 3 Coloque la etiqueta y, a continuación, presione con firmeza con un dedo para pegar la etiqueta. • La lámina protectora posterior de algunas cintas puede venir ya con un corte para que se pueda desprender la - Brother International PT2710 | Users Manual - English and Spanish - Page 162
esta forma usted podrá recuperar la etiqueta posteriormente con rapidez y facilidad cuando la necesite. • Cuando la memoria ya está llena, se sobrescribirá uno de los archivos almacenados cada vez que se guarda un archivo. • Usted perderá todos sus archivos almacenados si se desconecta el adaptador - Brother International PT2710 | Users Manual - English and Spanish - Page 163
la tecla o la tecla . 3 Oprima la tecla o la tecla . Aparece el número de archivo de una etiqueta almacenada. El texto de la etiqueta también aparece para identificar la etiqueta. 4 Seleccione un número de archivo utilizando la tecla o la tecla y seguidamente pulse la tecla o la tecla para abrir el - Brother International PT2710 | Users Manual - English and Spanish - Page 164
" utilizando la tecla o la tecla . 3 Oprima la tecla o la tecla . Aparece el número de archivo de una etiqueta almacenada. El texto de la etiqueta también aparece para identificar la etiqueta. 4 Seleccione un número de archivo con la tecla o la tecla y seguidamente oprima la tecla , o la tecla para - Brother International PT2710 | Users Manual - English and Spanish - Page 165
" con la tecla o la tecla . 3 Oprima la tecla o la tecla . Aparece el número de archivo de una etiqueta almacenada. El texto de la etiqueta también aparece para identificar la etiqueta. 4 Seleccione un número de archivo con la tecla o la tecla y seguidamente oprima la tecla o la tecla . Aparece el - Brother International PT2710 | Users Manual - English and Spanish - Page 166
debe limpiar con regularidad para conservar su rendimiento y duración. Extraiga siempre las baterías y desconecte el adaptador de CA antes de comenzar a limpiar la etiquetadora P-touch. Limpieza de la unidad principal Utilice un paño seco y suave para limpiar el polvo y cualquier mancha o sucio que - Brother International PT2710 | Users Manual - English and Spanish - Page 167
con las manos. • Consulte las instrucciones suministradas con la cinta de limpieza para cabezales de impresión para saber cómo debe utilizarla. Limpieza de la cortadora de cinta El uso continuado de la cortadora puede hacer que el adhesivo de la cinta se acumule en su cuchilla, lo cual puede - Brother International PT2710 | Users Manual - English and Spanish - Page 168
y extraiga las baterías durante más de 10 minutos. ¿Está el adaptador de CA bien conectado? Compruebe que el adaptador de CA diseñado exclusivamente para la etiquetadora P-touch está correctamente conectado. ¿Está utilizando el Asegúrese de que está adaptador de CA adecuado? usando el adaptador - Brother International PT2710 | Users Manual - English and Spanish - Page 169
cinta completo. Si no está que estaba saliendo por la rota, deje la cinta sin cortar y ranura de salida de la cinta? extraiga el cartucho de cinta 1 y, a continuación, enrolle la cinta de tinta suelta en el 2 carrete como se muestra en la figura. 3 4 Carrete 5 6 7 8 9 73 Qué hay que - Brother International PT2710 | Users Manual - English and Spanish - Page 170
"Op. corte", "Cadna" o "Sin corte"? ¿Está activada la función de Corte manual? Solución Cuando la cinta muestra franjas, esto indica que se ha llegado al final de la cinta. Sustituya el cartucho de cinta usado con un nuevo cartucho de cinta cuando aparezcan estas franjas. Reemplace todas las bater - Brother International PT2710 | Users Manual - English and Spanish - Page 171
etiquetas guardados anteriormente están vacíos ahora. Causa ¿Se han desconectado las baterías y el adaptador de CA? ¿Queda suficiente carga en las baterías? ¿Ha utilizado la función de Restablecimiento? Solución Todos los archivos almacenados en la memoria interna se pierden si las baterías y el - Brother International PT2710 | Users Manual - English and Spanish - Page 172
las baterías usadas con baterías nuevas o conecte el adaptador de CA antes de proseguir. Se ha conectado un adaptador de CA incompatible. Utilice sólo el adaptador de CA diseñado exclusivamente para su etiquetadora P-touch. La cortadora de cinta se cierra si se intenta imprimir o hacer avanzar la - Brother International PT2710 | Users Manual - English and Spanish - Page 173
No está instalado un cartucho de cinta de 1" (24mm) al seleccionar un formato automático para una cinta de 1" 2 (24mm). Instale un cartucho de cinta de 1" (24mm). 3 4 5 El cartucho de cinta instalado no es de 3/4" (18 mm) cuando está seleccionada la opción de cinta de 3/4" (18 mm) en la funci - Brother International PT2710 | Users Manual - English and Spanish - Page 174
ático. Instale un cartucho de cinta de 3/8" (9 mm). El cartucho de cinta instalado no es de 1/4" (6 mm) cuando está seleccionada la opción de cinta de 1/4" (6 mm) en la función de formato automático. Instale un cartucho de cinta de 1/4" (6 mm). El cartucho de cinta no es de 9/64" (3.5mm) cuando est - Brother International PT2710 | Users Manual - English and Spanish - Page 175
en los parámetros del código de barras. Introduzca el número de dígitos correcto. Los datos de código de barras introducidos no tienen los códigos de inicio y fin necesarios (A, B, C o D requeridos al principio y al final de los datos de código de barras para el protocolo CODABAR). Introduzca - Brother International PT2710 | Users Manual - English and Spanish - Page 176
Dispositivo de entrada (teclado) Pantalla Dispositivo de visualización Visualización de caracteres Pantalla con iluminación de fondo Impresión Método de impresión Cabezal de impresión Alto de impresión Velocidad de impresión Cartucho de cinta Cortadora de cinta Nº de líneas Dirección de impresi - Brother International PT2710 | Users Manual - English and Spanish - Page 177
18 mm):8, 1/2" (12 mm) : 4, 3/8" (9 mm) : 3, 1/4" (6 mm) : 1 5 niveles (+2, +1, 0, -1, -2) Adaptador de CA (AD-60), ocho baterías alcalinas de tamaño AA (LR6). Batería: 5 min.*, adaptador de CA: 8 horas *Sólo cuando se usa la etiquetadora P-touch. 1 hora, si está conectada a una PC. 7.06" (Ancho - Brother International PT2710 | Users Manual - English and Spanish - Page 178
ón Sistema operativo Mac OS X 10.1 - 10.4.4 Mac OS(R) 9.1 - 9.x* (Para sistemas Mac OS(R) 9.1 - 9.x, visite nuestro sitio Web http://solutions.brother.com para descargar controladores y software.) Memoria Se requieren 32MB o más Disco duro Se requieren 100MB o más Monitor Más de 256 colores - Brother International PT2710 | Users Manual - English and Spanish - Page 179
16 alineación 31 ancho 31 Avance y corte, función 21 C Caps, modo 13, 24 caracteres acentuados 29 Cargador de baterías 13 Cartuchos de cinta 18 contraste 21 Corte manual 64 cursor, teclas 24 D desconexión automática 20 E eliminar sólo texto 25 texto y formato 25 estilo 31 F formato - Brother International PT2710 | Users Manual - English and Spanish - Page 180
no prestan asistencia operativa. Consulte "Asistencia operativa". Asistencia operativa Si necesita asistencia técnica y operativa, puede llamar al Servicio de atención al cliente de Brother en: Voz 1-877-4-PTouch, o Fax 1-901-379-1210 Asistencia por Internet Para obtener información sobre productos
ELECTRONIC LABELING SYSTEM
ELECTRONIC LABELING SYSTEM
ELECTRONIC LABELING SYSTEM
P. 10