Brother International Quattro 2 6700D Users Manual - English
Brother International Quattro 2 6700D Manual
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International Quattro 2 6700D manual content summary:
- Brother International Quattro 2 6700D | Users Manual - English - Page 1
Operation Manual Embroidery and Sewing Machine Product Code: 882-W04/W05 Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs). - Brother International Quattro 2 6700D | Users Manual - English - Page 2
not limited to, procurement of substitute goods or services; loss of use, data, or profits; or trademark or a trademark of International Business Machines Corporation. Microsoft, Windows and Windows Vista are software title is mentioned in this manual has a Software License Agreement specific - Brother International Quattro 2 6700D | Users Manual - English - Page 3
Thank you for purchasing this embroidery and sewing machine. Before using this machine, carefully read the "IMPORTANT SAFETY INSTRUCTIONS", and then study this manual for the correct operation of the various functions. In addition, after you have finished reading this manual, store it where - Brother International Quattro 2 6700D | Users Manual - English - Page 4
follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother dealer. Use this machine only for its intended use as described in the manual. Use accessories recommended by the - Brother International Quattro 2 6700D | Users Manual - English - Page 5
908) 704-1700 declares that the product Product Name: Model Number: Brother Sewing Machine NV6700D This device complies with Part 15 of the FCC Rules. Operation , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there - Brother International Quattro 2 6700D | Users Manual - English - Page 6
. Be sure to observe the precaution. CAUTION • When using the side cutter, sew between low and mid-speed and do not touch the knives or operation lever of the side cutter while sewing to avoid equipment damage or injury. a Guide plate (lower knife) b Upper knife c Operation lever Label location 4 - Brother International Quattro 2 6700D | Users Manual - English - Page 7
IMPORTANT SAFETY INSTRUCTIONS 5 - Brother International Quattro 2 6700D | Users Manual - English - Page 8
OUTSTANDING FEATURES Display the Fabric While Aligning the Embroidering Position Expand Your Creativity With Bobbin Work Example with decorative stitches The fabric hooped in the embroidery frame can be displayed on the LCD so that the embroidery position can be easily aligned. This feature - Brother International Quattro 2 6700D | Users Manual - English - Page 9
sewing settings as you desire. Compose embroidery from children's drawings or of your signature to add to your original artwork. This is a function that everyone will enjoy using. The included pen tablet makes this function even easier to use. Refer to the instruction manual than the machine's LCD - Brother International Quattro 2 6700D | Users Manual - English - Page 10
Page 185 Embroidery Edit Designs can be combined, rotated or enlarged 6 Chapter Page 263 How to Create Bobbin Work To learn how to create bobbin work 7 Chapter Page 307 My Custom Stitch Create original decorative stitches 8 Chapter Page 325 Appendix Caring for your machine and dealing with - Brother International Quattro 2 6700D | Users Manual - English - Page 11
at the back of the operation manual in conjunction with the table of contents to find the section of the manual you should refer to. To sew utility stitches To sew character or decorative stitches Chapter 1 Chapter 2 Chapter 3 Chapter 4 To do machine embroidery Chapter 1 Chapter 2 Chapter - Brother International Quattro 2 6700D | Users Manual - English - Page 12
INSTRUCTIONS 1 OUTSTANDING FEATURES 6 WHAT YOU CAN DO WITH THIS MACHINE ......8 HOW TO USE THIS MANUAL 9 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS 13 Machine 13 Needle and Presser Foot Section 14 Embroidery Unit 15 Operation Buttons 15 Using the Flat Bed Attachment 16 Using the Accessory - Brother International Quattro 2 6700D | Users Manual - English - Page 13
309 Upper Threading 310 Preparing the Bobbin Thread 310 CREATING BOBBIN WORK (SEWING 314 Positioning the Fabric and Sewing 314 Bobbin Work Free Motion Sewing 317 CREATING BOBBIN WORK (EMBROIDERY) ... 318 Selecting the Pattern 318 Start Embroidering 320 ADJUSTING THE THREAD TENSION 322 - Brother International Quattro 2 6700D | Users Manual - English - Page 14
in the Bobbin Case Area 340 About the Maintenance Message 341 ADJUSTING THE SCREEN 342 Adjusting the Brightness of the Screen Display 342 Touch Panel is Malfunctioning 342 TROUBLESHOOTING 343 ERROR MESSAGES 348 SPECIFICATIONS 356 UPGRADING YOUR MACHINE'S SOFTWARE .......357 Upgrade Procedure - Brother International Quattro 2 6700D | Users Manual - English - Page 15
foot. (page 83) j Knee lifter slot Insert the knee lifter into the slot. (page 83) k Operation buttons (6 buttons) and sewing speed controller Use these buttons and the slide to operate the sewing machine. (page 15) l Flat bed attachment with accessory compartment Store presser feet and bobbins - Brother International Quattro 2 6700D | Users Manual - English - Page 16
feed the fabric in the sewing direction. f Bobbin cover Open the bobbin cover to set the bobbin. (page 54, 103) g Needle plate cover Remove the needle plate cover to clean the race. (page 97, 219) h Needle plate The needle plate is marked with guides to help sew straight seams. (page 96) i Needle - Brother International Quattro 2 6700D | Users Manual - English - Page 17
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Operation Buttons a Carriage The carriage moves the embroidery frame automatically when embroidering. (page 188) b Release button (located under the embroidery unit) Press the release button to remove the embroidery unit. (page 189) c Embroidery frame - Brother International Quattro 2 6700D | Users Manual - English - Page 18
be opened or locked correctly if both bars are slid in the same direction. a Bars ■ Using the Accessory Trays Two presser foot storage trays are stored in the included accessory case. One is for presser feet for utility sewing, and the other is for presser feet for embroidery and machine quilting - Brother International Quattro 2 6700D | Users Manual - English - Page 19
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Using the Embroidery Unit Carrying Case Included accessories 44-47 are contained in the embroidery unit carrying case. To open the embroidery unit carrying case, raise each lock and move the latches out of position. To re-hook the latches and securely close - Brother International Quattro 2 6700D | Users Manual - English - Page 20
: Ball point needle (gold colored) 2.0/11 needle 75/11 2 needles 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44* 45* 46* 47* 48 49 50 51 52 *Included Accessories 44-47 are contained in the embroidery unit carrying case. 18 - Brother International Quattro 2 6700D | Users Manual - English - Page 21
cloth XE4913-001 57 Soft cover XE5111-001 (882-W04) XE5163-001 (882-W05) 58 Embroidery unit carrying case XE3791-001 59 Accessory case XF0337-001 (882-W04) XF0333-001 (882-W05) 60 Operation manual This manual 61 Quick reference guide XF0230-001 62 My Custom Design CD XF0186-001 19 - Brother International Quattro 2 6700D | Users Manual - English - Page 22
Options The following are available as optional accessories to be purchased separately from your authorized Brother dealer. 1 2 3 4 5 6 No. Part Name 1 Border embroidery frame H 30 cm × W 10 cm (H 12 inches × W 4 inches) with Kit 3 upgrade 2 Border embroidery frame set H 18 cm × W 10 cm - Brother International Quattro 2 6700D | Users Manual - English - Page 23
cards purchased in foreign countries may not work with your machine. • Visit your nearest authorized Brother dealer for a complete listing of optional accessories and embroidery cards available for your machine. ■ How to assemble the spool stand a Fully extend the telescopic thread guide shaft - Brother International Quattro 2 6700D | Users Manual - English - Page 24
each side), and then pull the upper cover up to remove it from the machine. b Attach the upper cover to the machine. e Insert the spool the machine. stand onto the notches of Memo • See page 52 about the bobbin winding using the spool stand. • See page 63 about the upper threading using - Brother International Quattro 2 6700D | Users Manual - English - Page 25
PARTS AND THEIR FUNCTIONS a Unscrew the upper barrel of the tablet pen. Memo • See page 34 about connecting the pen tab- let with the sewing machine. 1 2 3 4 5 Note • Unscrew the upper barrel slowly, so that the tablet pen will not be damaged. b Install a new AAA alkaline battery (LR03) the - Brother International Quattro 2 6700D | Users Manual - English - Page 26
pen tip until it is flush with For detailed instructions about operating My Custom Design, refer to the Operation Manual (PDF format) stored on the My Custom Design CD. ■ Using with My Custom Design a Select a favorite picture embroidery pattern. for creating Note • When you create the - Brother International Quattro 2 6700D | Users Manual - English - Page 27
Colors of the Embroidery Patterns 42 ■ Specifying the Size of Pattern Thumbnails 43 Using the Sewing Machine Help Key 44 Using the Operation Guide Function 45 Using the Sewing Guide Function 46 Using the Pattern Explanation Function 47 LOWER THREADING 48 Winding the Bobbin 48 ■ Using the - Brother International Quattro 2 6700D | Users Manual - English - Page 28
should be turned to OFF or the plug must be removed from the socket-outlet. • When servicing the machine or when removing covers, the machine must be unplugged. • For U.S.A only This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this plug - Brother International Quattro 2 6700D | Users Manual - English - Page 29
ON/OFF 1 Getting Ready a Main power switch b Power supply cord b Turn the main power on the machine. switch to "I" to turn a OFF b ON Memo • When the machine is turned on, the needle and the feed dogs will make sound when they move; this is not a malfunction. c Turn the main power - Brother International Quattro 2 6700D | Users Manual - English - Page 30
Key Name Explanation Page a Sewing key Press this key to sew utility stitches or character or decorative stitch See the "Key patterns. Functions" table. 30 b Embroidery key Attach the embroidery unit and press this key to embroider patterns. 186 c Embroidery Edit key Press this key - Brother International Quattro 2 6700D | Users Manual - English - Page 31
Press a key with your finger to select the stitch pattern, to select a machine function, or to select an operation indicated on the key. 1 a b c of the selected stitch. c Shows the presser foot code. Attach the presser foot indicated in this display before sewing. d Shows a preview of the selected - Brother International Quattro 2 6700D | Users Manual - English - Page 32
lock key Press this key to lock the screen.When the screen is locked, the various 86 settings, such as the stitch width and stitch length, are locked category - "Sewing", "Embroidery" or "Embroidery edit". f Stitch selection 91 retrieve a saved pattern. 93 Manual memory key Reset key Change the - Brother International Quattro 2 6700D | Users Manual - English - Page 33
Press this key before changing the needle, the presser foot, etc. This key locks 65-68 exchange key all key and button functions to prevent operation of the machine. m Sewing machine help Press this key to see explanations on how to use the machine. key 1 44 n Camera view key Touch this key - Brother International Quattro 2 6700D | Users Manual - English - Page 34
for media or card Reader/ USB card writer module* (USB2.0) * If you have purchased the PE-DESIGN Ver5 or later, PE-DESIGN Lite or PED-BASIC, you can plug the included USB card writer module into the machine as an embroidery card reader, and recall patterns. b USB port for mouse (USB1.1) c USB port - Brother International Quattro 2 6700D | Users Manual - English - Page 35
the USB port on the computer (or USB hub), refer to the instruction manual for the corresponding equipment. ■ Clicking a Key When the mouse is no effect. a ■ Using a USB Mouse The USB mouse, connected to the sewing machine, can be used to perform a variety of operations in the screens. Connect a - Brother International Quattro 2 6700D | Users Manual - English - Page 36
Using the Pen Tablet The included pen tablet, connected to the sewing machine, can be used when creating your original embroidery pattern with My Custom Design. Also, you can use the pen tablet as a USB mouse when operating your sewing machine. Connect the pen tablet to the USB 1.1 port marked with - Brother International Quattro 2 6700D | Users Manual - English - Page 37
is stopped when the pivot setting is selected (see page 84). Adjust the presser foot to one of the three heights (3.2 mm, 5.0 mm and 7.5 mm). g Change the height of the presser foot when the machine is set to free motion sewing mode (see page 116). h When set to "ON", the thickness of the fabric - Brother International Quattro 2 6700D | Users Manual - English - Page 38
page 39). f Turn both the upper and bobbin thread sensor "ON" or "OFF". If it is turned "OFF", the machine can be used without thread. g Select the machine is turned on (see page 41). j Press "ON" when using the embroidery data creation software My Custom Design. Refer to the instruction manual - Brother International Quattro 2 6700D | Users Manual - English - Page 39
the upgrade kits. n Display the service count which is a reminder to take your machine in for regular servicing. (Contact your authorized dealer for details.) o Display the total number of stitches sewn on this machine. 1 m p The "No." is the internal machine number for the embroidery and sewing - Brother International Quattro 2 6700D | Users Manual - English - Page 40
(see page 299). l Adjust the distance between the appliqué pattern and the outline (see page 300). m Use to display the fabric while aligning the embroidery position (see page 211). n Press to specify the size of pattern thumbnails (see page 43). o Press to save a settings screen image to USB media - Brother International Quattro 2 6700D | Users Manual - English - Page 41
into the primary (top) USB port on the right side of the machine. In the settings screen, the shape can be selected for the pointer Embroidery Patterns" on page 42. Getting Ready a Press . → The Sewing settings screen appears. a Primary (top) USB port b USB media b Press . → The Sewing - Brother International Quattro 2 6700D | Users Manual - English - Page 42
a USB cable) that contains your personal image to the USB port of the machine. * See page 32 about USB connectivity. g Press to select the first the folder that holds your personal images. a Press . → The Sewing settings screen appears. b Press . → The General settings screen appears. - Brother International Quattro 2 6700D | Users Manual - English - Page 43
is touched. * Home Page: When the machine is turned on, the home page screen appears. * Sewing/Embroidery Screen: When the machine is turned on, the Embroidery screen appears if the embroidery unit is attached to the machine, or the sewing screen appears if the embroidery unit is not attached to the - Brother International Quattro 2 6700D | Users Manual - English - Page 44
. Different background colors can be selected for the embroidery pattern and pattern thumbnails. a Press . b → The Sewing settings screen appears. b Press . → The Embroidery settings screen appears. Memo • When using the Embroidery or Embroidery Edit, touch to directly access the - Brother International Quattro 2 6700D | Users Manual - English - Page 45
size is 1.5 times the normal 1 size. Getting Ready a Press . → The Sewing settings screen appears. b Press . → The Embroidery settings screen appears. c Display settings 8/8 (page screen. 8 of 8) of the Embroidery Note • When thumbnail size setting has been changed the pattern - Brother International Quattro 2 6700D | Users Manual - English - Page 46
see explanation for upper threading, winding the bobbin, changing the presser foot, preparing to embroider a pattern, and how to use the machine (see page 47). b Press this key to select utility stitches when you are not sure which stitch to use or how to sew the stitch (see page 45). c Press this - Brother International Quattro 2 6700D | Users Manual - English - Page 47
information about threading the machine, changing presser feet, etc. Some of the functions are described in the movies. Watch these movies for a better understanding of the functions. displays information about attaching the embroidery unit, preparing fabric for embroidering, etc. Some of the - Brother International Quattro 2 6700D | Users Manual - English - Page 48
will change. d Press (upper threading). Using the Sewing Guide Function The sewing guide function can be used to select patterns from the Utility screen shows instructions for threading the machine. e Read the instructions. * Press to see a video of the displayed instructions. Press under - Brother International Quattro 2 6700D | Users Manual - English - Page 49
of the category whose instructions you wish to view. sewing a Press . * Press to return to the original screen. b Press . LCD SCREEN 1 Getting Ready e Read the explanations appropriate stitch. and select the c Press . → The screen displays directions for sewing the selected stitch - Brother International Quattro 2 6700D | Users Manual - English - Page 50
the Supplemental Spool Pin With this machine, you can wind the bobbin during sewing. While using the main spool pin to sew → embroidery, you can conveniently wind the bobbin using the supplemental spool pin. → in this order to display a video example of bobbin winding on the LCD (see page - Brother International Quattro 2 6700D | Users Manual - English - Page 51
of the thread, and use both hands to pass the thread through the thread guide. 1 Getting Ready a Supplemental spool pin d Place the spool of thread on on the end of the spool and cause the needle to break. Memo • When sewing with fine, cross-wound thread, use the small spool cap, and leave a - Brother International Quattro 2 6700D | Users Manual - English - Page 52
to the left switches the machine into bobbin winding mode. → The bobbin winding window appears. 50 Note • changes to while the bobbin is winding. • Stay near the machine while winding the bobbin to make sure the bobbin thread is being wound correctly. If the bobbin thread is wound incorrectly - Brother International Quattro 2 6700D | Users Manual - English - Page 53
wind the bobbin while sewing. a Spool pin b Spool cap c Thread spool d Spool felt d Push the spool cap onto the spool pin as far as possible, then return the spool pin to its original position. e While holding the pull the thread up thread with both hands, from under the thread guide plate - Brother International Quattro 2 6700D | Users Manual - English - Page 54
disk. a Thread guide b Pre-tension disk h Follow steps through 51. g through k on page 50 Memo • See page 21 to assemble the spool stand. • See page 63 to thread the machine using the spool stand. CAUTION • When winding thread on the bobbin, do not cross the bobbin winding thread with the - Brother International Quattro 2 6700D | Users Manual - English - Page 55
winder seat. It may result in injuries. a If the thread becomes tangled under the bobbin winder seat, press once to stop the bobbin winding. e Wind the bobbin again. Note • Make sure that the thread passes through the pre-tension disk correctly (page 49). b Cut the tension thread disk. with - Brother International Quattro 2 6700D | Users Manual - English - Page 56
16 inch) • Before inserting or changing the bobbin, be sure to press in the LCD, otherwise injuries may occur if the "Start/Stop" button or any other button is pressed and the machine starts sewing. f Hold the bobbin lightly with your right hand, and then guide the thread with your left hand - Brother International Quattro 2 6700D | Users Manual - English - Page 57
the thread through the guide, and pull the thread out toward the front. then Pulling Up the Bobbin Thread There may be some sewing applications where you want to pull up the bobbin thread; for 1 example, when making gathers, darts, or doing free motion quilting or embroidery. Getting Ready - Brother International Quattro 2 6700D | Users Manual - English - Page 58
LOWER THREADING e Pull up the bobbin thread, pass presser foot and pull it about it under the 100 mm (approx. 3-4 inches) toward the back of the machine, making it even with the upper thread. a Upper thread b Bobbin thread f Replace the bobbin cover. 56 - Brother International Quattro 2 6700D | Users Manual - English - Page 59
the walking foot, the side cutter or accessories not included with this machine, attach the accessory to the machine after threading the machine. → The upper thread shutter opens so the machine can be threaded. Memo • The automatic threading function can be used with sewing machine needle sizes - Brother International Quattro 2 6700D | Users Manual - English - Page 60
holding the pull the thread up thread with both hands, from under the thread guide plate. a Spool pin b Spool cap c Thread spool d Spool felt e needle to break. h Guide the thread down, up, then down through the groove, as shown in the illustration. Memo • When sewing with fine, cross-wound - Brother International Quattro 2 6700D | Users Manual - English - Page 61
the "Automatic Threading" button to have the machine automatically thread the needle. a Groove in thread guide → The thread passes through the eye of the needle. Memo • When the "Automatic Threading" button is pressed, the presser foot will be automatically lowered. After threading is finished - Brother International Quattro 2 6700D | Users Manual - English - Page 62
marked "6"), manually pass the thread through the eye of the needle from the front. Note • Pulling the loop of thread gently will avoid needle breakage. o Pull out about 10-15 cm (approx. 4-6 inches) of the thread, and then pass it under the presser foot toward the rear of the machine. → Raise - Brother International Quattro 2 6700D | Users Manual - English - Page 63
thread the needle on the left side manually. a Needle bar thread guide Note • The "Automatic Threading" button cannot be used. Manually thread the twin needle from front to back. Using the "Automatic Threading" button may result in damage to the machine. d Pull up the supplemental spool in the - Brother International Quattro 2 6700D | Users Manual - English - Page 64
the machine is in single needle mode could cause the needle to break, resulting in damage. l Start sewing. Sample of Twin Needle Sewing j Select a stitch pattern. (Example: ) * Refer to the "STITCH SETTING CHART" at the end of this manual for the proper stitch to use with presser foot "J". → The - Brother International Quattro 2 6700D | Users Manual - English - Page 65
21 to assemble the spool stand. • See page 52 to wind the bobbin when using the spool stand. UPPER THREADING • Depending on the size of the thread may catch and sewing performance may suffer. a Spool cap b Spool cap base a Attach the page 21.) spool stand to the machine. (see • When using - Brother International Quattro 2 6700D | Users Manual - English - Page 66
spool before using it. When using specialty threads, threading must be done manually. If the spool net is too long, fold it once to match instructed, wind any excess thread back onto the spool, otherwise the excess thread will become tangled. d Pass the thread through the machine's thread guide - Brother International Quattro 2 6700D | Users Manual - English - Page 67
• Only use presser feet made for this machine. Using other presser feet may lead to accident or injury. Getting Ready Removing the Presser Foot d Press the black button on the presser holder and remove the presser foot. foot Press → → → → in this order to display a video example of the - Brother International Quattro 2 6700D | Users Manual - English - Page 68
(such as vinyl, leather, or synthetic leather). Note • Thread the needle manually when using the walking foot, or only attach the walking foot after threading the needle using the "Automatic Threading" button. • When sewing with the walking foot, sew at medium to low speeds. Memo • The walking - Brother International Quattro 2 6700D | Users Manual - English - Page 69
fabric or paper to prevent the needle from falling into the machine. c Use the screwdriver to toward the front of the turn the screw machine and loosen the screw. Remove the needle. a Parallel space b Level surface (bobbin cover, glass, etc.) a Press the "Needle the needle. Position" button - Brother International Quattro 2 6700D | Users Manual - English - Page 70
top of the needle stopper (viewing window) in the needle clamp. Use a screwdriver to securely tighten the needle clamp screw. a Needle stopper b Hole for setting the securely tighten the needle clamp screw with a screwdriver. If the needle is not completely inserted or the needle clamp screw is - Brother International Quattro 2 6700D | Users Manual - English - Page 71
. • To avoid skipped stitches, use ball point needle (golden colored) 90/14 when sewing character or decorative stitches. • Use needle 75/11 for embroidery. Use ball point needle 75/11 for embroidering patterns with short jump stitches such as alphabet characters when the thread trimming function is - Brother International Quattro 2 6700D | Users Manual - English - Page 72
CHANGING THE NEEDLE 70 - Brother International Quattro 2 6700D | Users Manual - English - Page 73
Chapter Sewing Basics SEWING 72 Sewing a Stitch...72 ■ Using the Foot Controller 73 Sewing Reinforcement Stitches 74 Sewing Curves ...74 Changing Sewing Direction 75 ■ Sewing a Seam Allowance of 0.5 cm or Less 75 Sewing Heavyweight Fabrics 75 ■ If the Fabric does not Fit under the Presser Foot - Brother International Quattro 2 6700D | Users Manual - English - Page 74
screen. Memo • The black button on the left side of presser foot "J" should be pressed only if the fabric does not feed or when sewing thick seams (see page 76). Normally, you can sew without pressing the black button. e Lower the presser foot. * You do not have to pull up the bobbin thread. 72 - Brother International Quattro 2 6700D | Users Manual - English - Page 75
automatically. Memo • When the foot controller is being used, you cannot start sewing by pressing the "Start/ Stop" button. • The foot controller cannot be used when embroidering. • The foot controller can be used for sewing utility and decorative stitches when the embroidery unit is attached. 73 - Brother International Quattro 2 6700D | Users Manual - English - Page 76
on the machine. Sewing Reinforcement Stitches Reverse/reinforcement stitches are generally necessary at the beginning and end of sewing. You can use the "Reverse/Reinforcement Stitch" button to sew reverse/reinforcement stitches manually (see page 15). a Foot controller b Foot controller jack - Brother International Quattro 2 6700D | Users Manual - English - Page 77
Press the "Presser Foot Lifter" button to lower the presser foot and start sewing. Sewing Heavyweight Fabrics The sewing machine can sew fabrics up to 6 mm (approx. 1/4 inch) thick. If the thickness of a seam causes sewing to occur at an angle, help guide the fabric by hand and sew on the downward - Brother International Quattro 2 6700D | Users Manual - English - Page 78
level, enabling the fabric to be fed. Memo • Once the trouble spot has been passed, the foot will return to its normal position. • When "Automatic Fabric Sensor System" (Automatic Presser Foot Pressure) in the machine settings screen is set to "ON", the thickness of the fabric is automatically - Brother International Quattro 2 6700D | Users Manual - English - Page 79
the pieces of fabric, and then sew without stretching the fabric. In addition, a better result can be achieved by using thread for knits or a stretch stitch. Memo • For best results when sewing stretch fabrics, decrease the pressure of the presser foot ("Using the Machine Setting Mode Key" on page - Brother International Quattro 2 6700D | Users Manual - English - Page 80
to the "STITCH SETTING CHART" at the end of this manual). • If you turn off the machine or select another stitch without saving stitch setting changes ("Saving check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. → The value in - Brother International Quattro 2 6700D | Users Manual - English - Page 81
the fabric. Only the upper thread should be visible from the right side of the fabric, and only the bobbin thread should be visible from the wrong side of the fabric. Sewing Basics → The value in the display gets smaller. Press to lengthen the stitch length. a Wrong side b Surface c Upper thread - Brother International Quattro 2 6700D | Users Manual - English - Page 82
case, refer to "Upper Threading" (page 57) and rethread the upper thread. a Bobbin thread b Upper thread c Surface d Locks appear on surface of fabric Press , to loosen the upper thread. Memo • When you finish sewing, remove the bobbin cover and then make sure that the thread is shown as below. If - Brother International Quattro 2 6700D | Users Manual - English - Page 83
turn on this function (the key appears as when the stitch is selected). a Reverse stitches (or reinforcement stitches) → The machine will sew reverse stitches (or reinforcement stitches) and stop. Memo • To turn off the automatic reinforcement stitching function, press again, so it - Brother International Quattro 2 6700D | Users Manual - English - Page 84
Stitching" button. → The key will display as . Memo • This function is set automatically when sew- ing embroidery. a Reverse stitches (or reinforcement stitches) → The machine will sew reverse stitches (or reinforcement stitches), then trim the thread. Memo • To turn off the automatic thread - Brother International Quattro 2 6700D | Users Manual - English - Page 85
lifter bar to the right in order to raise the presser foot. Release the knee lifter to lower the presser foot. CAUTION • Be sure to keep your knee away from the knee lifter during sewing. If the knee lifter is pushed during machine operation, the needle may break or the thread tension may loosen - Brother International Quattro 2 6700D | Users Manual - English - Page 86
. When the "Start/Stop" button is pressed again, the presser foot is automatically lowered and sewing continues. This function is useful for stopping the machine to rotate the fabric. CAUTION • When the pivot setting is selected, the machine starts when the "Start/Stop" button is pressed or the - Brother International Quattro 2 6700D | Users Manual - English - Page 87
stitches) will not be sewn. d Press the "Start/Stop" button to stop the machine at the point where the sewing direction changes. → The machine stops with the needle in the fabric, and the presser foot is raised. e Rotate the fabric, Stop" button. and then press the "Start/ a Press - Brother International Quattro 2 6700D | Users Manual - English - Page 88
be changed. This prevents screen settings from accidentally being changed or the machine from being stopped while large pieces of fabric or projects are being sewn. The screen can be locked when sewing utility stitches and character decorative stitches. a Select a stitch pattern. b If necessary - Brother International Quattro 2 6700D | Users Manual - English - Page 89
the machine to foot and change the needle drop position by moving the fabric. a a Needle drop position ZOOM Press to enlarge the image in the screen. Press again to return the image to its original display size. Note • The camera view window disappears when you start sewing. • When sewing - Brother International Quattro 2 6700D | Users Manual - English - Page 90
USEFUL FUNCTIONS 88 - Brother International Quattro 2 6700D | Users Manual - English - Page 91
103 ■ Cord Guide Bobbin Cover (Using a Zigzag Stitch 103 Elastic Zigzag Stitches 104 ■ Tape Attaching 104 ■ Overcasting 104 Overcasting 105 ■ Overcasting Using Presser Foot "G 105 ■ Overcasting Using Presser Foot "J 106 ■ Overcasting Using the Side Cutter 107 ■ When Sewing Straight Stitches - Brother International Quattro 2 6700D | Users Manual - English - Page 92
such as selection screen for that category. Straight/Overcasting Decorative Stitches appears, there is more than one stitch Heirloom Stitches Buttonholes/Bar tacks Multi-directional Sewing Quilting Stitches 90 - Brother International Quattro 2 6700D | Users Manual - English - Page 93
of utility stitch you select, you may be able to sew a horizontal mirror image of the stitch. If is lit or type of presser foot recommended (this is true of buttonholes, multi-directional sewing, and others). of the stitch you want to sew. Memo • For details on each stitch, refer to the "STITCH - Brother International Quattro 2 6700D | Users Manual - English - Page 94
The settings for the zigzag stitch width, stitch length, thread tension, automatic thread cutting, automatic reinforcement stitching, etc., are preset in the machine for each stitch. However, if you have specific settings that you wish to reuse later for a stitch, you can change the settings so - Brother International Quattro 2 6700D | Users Manual - English - Page 95
a stitch. Memo • When a stitch is selected, the last settings retrieved are displayed. The last settings retrieved are retained even if the machine was turned off or a different stitch was selected. b Press . a Numbered keys d Press . → The selected settings are retrieved, and the original - Brother International Quattro 2 6700D | Users Manual - English - Page 96
stitch (Left) Straight stitch (Middle) Straight stitch (Middle) Triple stretch stitch Stem stitch Presser foot Applications Stitch width [mm (inch)] Auto Manual General sewing, gather, pintuck, etc. Reverse stitch is sewn while 0.0 pressing "Reverse/ (0) Reinforcement Stitch" button - Brother International Quattro 2 6700D | Users Manual - English - Page 97
THE STITCHES e Press the forward. "Start/Stop" button to sew a Reverse stitches → The machine will begin sewing slowly. 3 CAUTION Utility Stitches b Attach presser foot "J". * Attach presser foot "N" when you select . c Hold the thread tail and fabric with your left hand, and rotate - Brother International Quattro 2 6700D | Users Manual - English - Page 98
the needle with the stitch width, then align the edge of the presser foot with the edge of the fabric during sewing for an attractive finish. ■ Aligning the Fabric with a Mark on the Needle Plate or Bobbin Cover (with Mark) While sewing, align the edge of the fabric with the 16 mm (approx. 5/8 inch - Brother International Quattro 2 6700D | Users Manual - English - Page 99
needle plate during sewing. The straight stitch foot is perfect to reduce puckering on lightweight fabrics. The small opening on the foot provides support for the fabric as the needle travels through the fabric. a Bobbin case f Use the disc-shaped screw driver included with the machine to unscrew - Brother International Quattro 2 6700D | Users Manual - English - Page 100
use a reinforcement stitch at the beginning; you should lift the presser foot, rotate the handwheel toward you (counterclockwise), pull up the bobbin thread and pull a length of top and bobbin thread out from the rear of the machine. • You can set the stitch length between 5 mm (approx. 3/16 inch - Brother International Quattro 2 6700D | Users Manual - English - Page 101
STITCHES e Iron the dart to one side so that it is flat. a Select and attach presser foot "J". b Sew dart a reverse stitch at the beginning of and then sew from the wide end to the the other end without stretching the fabric. * If automatic reinforcement stitching is preset, a reinforcement - Brother International Quattro 2 6700D | Users Manual - English - Page 102
page 55). Flat Fell Seam Use for reinforcing seams and finishing edges neatly. a Select and attach presser foot "J". a Upper thread b Bobbin thread c About 50 mm (approx. 1-15/16 inches) d Sew two rows the seam line, of straight stitches parallel then trim excess thread to leaving 50 mm - Brother International Quattro 2 6700D | Users Manual - English - Page 103
automatically at the beginning of sewing. Press the "Reverse/Reinforcement Stitch" button to sew a reinforcement stitch and trim the thread automatically at the end of sewing. a Wrong side Finished flat . fabric and iron the folded parts a Surface c Select and attach presser foot "I". 101 - Brother International Quattro 2 6700D | Users Manual - English - Page 104
attach presser foot "J". If the stitch which you select has a double mark " " at the top of the key display, you can sew reverse Reinforcement Stitch" button. Start from right needle position, zigzag sew at left. Stitch width [mm (inch)] Auto Manual 3.5 (1/8) 0.0 - 7.0 (0 - 1/4) 3.5 (1/8) 0.0 - Brother International Quattro 2 6700D | Users Manual - English - Page 105
. Sew slowly, keeping the seams parallel with the fabric edge as you guide the fabric around the curve. e Attach presser foot "N". f Position the fabric right side up on top of the cord and place the cord to the rear of the machine under the presser foot. Utility Stitches ■ Cord Guide Bobbin - Brother International Quattro 2 6700D | Users Manual - English - Page 106
and elastic (3/16) 1.5 - 7.0 (1/16 - 1/4) Stitch length [mm (inch)] Auto Manual 1.0 0.2 - 4.0 (1/16) (1/64 - 1/16) 1.0 0.2 - 4.0 (1/16) (1/64 sew the tape to the fabric. b Attach presser foot "J". a Tape ■ Overcasting Use this stitch to sew overcasting on the edge of stretch fabrics. Sew - Brother International Quattro 2 6700D | Users Manual - English - Page 107
foot Applications Reinforcing of light and medium weight fabrics Stitch width [mm (inch)] Auto Manual 3.5 2.5 - 5.0 (1/8) (3/32 - 3/16) Stitch length [mm (inch)] Auto Manual presser foot "G". c Sew along the presser foot guide. 3 Utility Stitches b Lower the foot guide presser foot so - Brother International Quattro 2 6700D | Users Manual - English - Page 108
foot Applications Reinforced seaming of stretch fabric Stitch width [mm (inch)] Auto Manual 5.0 (3/16) 0.0 - 7.0 (0 - 9/32) Stitch length [mm (inch)] Auto Manual OK ( J ) a Select a stitch and attach presser foot "J". b Sew with the needle dropping the edge of the fabric. slightly off - Brother International Quattro 2 6700D | Users Manual - English - Page 109
the side cutter, you can do overcasting while cutting the fabric. SEWING THE STITCHES CAUTION • Recommended stitches are noted "S" in the lower may cause the needle to hit the presser foot and break, possibly causing injury. Note • Thread the needle manually when using the side cutter, or only - Brother International Quattro 2 6700D | Users Manual - English - Page 110
SEWING THE STITCHES e Position the side cutter so that the side cutter pin is aligned with the notch in the presser foot holder, and then lower the presser foot. h Position the fabric so that the right side of the cut is on top of the guide plate and the left side of the cut is - Brother International Quattro 2 6700D | Users Manual - English - Page 111
not be cut if the whole fabric is simply spread out underneath the presser foot guide plate. Set the fabric as explained in step h from the previous section, and then start sewing. Utility Stitches a Guide plate (lower knife) b Upper knife c Operation lever Note • If the width has been adjusted - Brother International Quattro 2 6700D | Users Manual - English - Page 112
SEWING THE STITCHES Quilting You can make beautiful quilts quickly and easily with this machine. When making a quilt, you will find it convenient to use the knee lifter and foot controller to free your hands for other tasks ("Using the Foot Controller" on page 73 and /or "Using the Knee Lifter" on - Brother International Quattro 2 6700D | Users Manual - English - Page 113
SEWING THE STITCHES Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto Manual Twin needle Quilting stippling Background quilting 7.00 1.00 - 7.0 1.6 1.0 - 4.0 (1/4) (1/16 - 1/4) (1/16) (1/16 - 3/16) NO Overcasting stitch - Brother International Quattro 2 6700D | Users Manual - English - Page 114
SEWING THE STITCHES Stitch Stitch name Piecing stitch (Left) Hand-look quilting Quilting appliqué zigzag stitch Quilting appliqué stitch Quilting stippling Presser foot Applications Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto Manual Twin needle Piecework/patchwork - Brother International Quattro 2 6700D | Users Manual - English - Page 115
32 inch). Note • Thread the needle manually when using the walking foot, or only attach the walking foot after threading the needle using the "Automatic Threading" button. c Place one hand on each side of the presser foot to hold the fabric secure while sewing. a 6.5 mm (approx. 1/4 inch) * To - Brother International Quattro 2 6700D | Users Manual - English - Page 116
and then cut around it, leaving a 3 to 5 mm (approx. 1/8 to 3/16 inch) seam allowance. d Select and attach presser foot "J". e Use the quilting appliqué stitch to attach the appliqué. Sew around the edge while dropping the needle as close to the edge as possible. a Seam allowance: 3 to 5 mm - Brother International Quattro 2 6700D | Users Manual - English - Page 117
e Set the width control to "ON". a Dresden plate b Stained glass c Sunbonnet sue ■ Quilting with Satin Stitches 3 For better fabric control, use the foot controller to sew with satin stitches. Set the speed control slide to control the stitch width to make subtle changes in the stitch width - Brother International Quattro 2 6700D | Users Manual - English - Page 118
that is selected, and set the machine to free motion sewing mode. In this mode, the presser foot is raised to the necessary height for free motion sewing. We recommend attaching the foot controller and sewing at a consistent speed. You can adjust the sewing speed with the speed control slide on - Brother International Quattro 2 6700D | Users Manual - English - Page 119
height, and then the feed dogs are lowered for free motion sewing. f Hold the quilting foot in place with your right hand, and tighten the presser foot holder screw using the screwdriver with your left hand. a a Presser foot holder screw CAUTION • Be sure to securely tighten the screws with - Brother International Quattro 2 6700D | Users Manual - English - Page 120
Memo • Normally, the feed dogs are raised for regular sewing. • Do not be discouraged with your initial results. The technique requires practice. a Press to set the machine to free motion sewing mode. 118 → The key appears as , the quilting foot is raised to the necessary height, and then the - Brother International Quattro 2 6700D | Users Manual - English - Page 121
presser foot as a guide, sew around the motif at a fixed interval. We recommend attaching the foot controller and sewing at a consistent speed. Free motion echo quilting foot "E" measurement a Presser foot holder screw CAUTION • Be sure to securely tighten the screws with the included screwdriver - Brother International Quattro 2 6700D | Users Manual - English - Page 122
with a sample piece of quilting fabric. a Select . b Press to set the machine to free motion sewing mode. CAUTION • Be sure to securely tighten the screws with the included screwdriver. Otherwise, the needle may touch the quilting foot, causing it to bend or break. 120 → The key appears as - Brother International Quattro 2 6700D | Users Manual - English - Page 123
g Using the measurement on as a guide, sew around the the quilting motif. foot SEWING THE STITCHES 3 a 6.4 mm (approx. 1/4 inch) Finished project Utility Stitches h Press mode. to cancel the free motion sewing → Rotate the handwheel toward you (counterclockwise) to raise the feed dogs. 121 - Brother International Quattro 2 6700D | Users Manual - English - Page 124
stitches are available for blind hem stitching. Stitch Stitch name Blind hem stitch Blind hem stitch stretch Presser foot Applications Blind hem stitching on mediumweight fabrics Blind hem stitching on stretch fabrics Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto - Brother International Quattro 2 6700D | Users Manual - English - Page 125
foot "R". SEWING THE STITCHES j Position the fabric with the edge of the folded hem against the guide of the presser foot, and then lower the presser foot lever. a Wrong side of fabric b Fold of hem c Guide of these cases, follow the instructions below to solve the problem. a Free arm 123 - Brother International Quattro 2 6700D | Users Manual - English - Page 126
1 2 a Wrong side of fabric b Right side of fabric a Wrong side of fabric b Right side of fabric l Sew with the fold of the hem against the presser foot guide. m Remove the the fabric. basting stitching and reverse 1 2 a Wrong side of fabric b Right side of fabric 124 - Brother International Quattro 2 6700D | Users Manual - English - Page 127
foot and turn the fabric a little bit at a time while sewing for an attractive finish to the seam. a Appliqué b Fabric glue ■ Appliqué Corners 3 Stop the machine of this manual. c Attach needle presser foot "J". Check that the drops slightly off the edge of the appliqué, then start sewing. a - Brother International Quattro 2 6700D | Users Manual - English - Page 128
manual. b Increase the upper thread attractive scallop finish to tension for an the shelltuck stitches (see page 79). d Attach presser foot "J". Set the needle drop point slightly off the edge of the fabric, and start sewing instructions and then use this stitch to make a decorative - Brother International Quattro 2 6700D | Users Manual - English - Page 129
at the end of this manual. b Attach presser foot "N". Sew stitches along the edge of the scallop fabric. * Do not sew directly on the edge of sure not to cut d Place the machine, fabric right side up in the and center the presser foot over the seam when sewing. Memo • Use a seam sealant to - Brother International Quattro 2 6700D | Users Manual - English - Page 130
for decorative sewing on clothes, etc. a Select a straight foot "J". stitch ). c Pull the bobbin and upper threads 50 mm (approx. 1-15/16 inches). out by d Sew the seams, leaving , refer to the "STITCH SETTING CHART" at the end of this manual. 128 a 4.0 mm (approx. 3/16 inch) b Paper c - Brother International Quattro 2 6700D | Users Manual - English - Page 131
and begin sewing. SEWING THE STITCHES Memo • Before sewing the straight stitch, rotate the handwheel toward you (counterclockwise) and pull up the bobbin thread. Holding the top and bobbin thread, pull a length of thread out from the rear of the machine. (Be sure that the presser foot is raised - Brother International Quattro 2 6700D | Users Manual - English - Page 132
may result in damage to the machine. • A more attractive finish can be obtained if you use a "130/705H Wing" needle when sewing these patterns. If using a wing needle and the stitch width has been set manually, check that the needle will not touch the presser foot by carefully rotating the handwheel - Brother International Quattro 2 6700D | Users Manual - English - Page 133
on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. c Attach presser foot of the fabric facing "N". With the right side up, sew one edge of the open area. SEWING THE STITCHES ■ Hemstitching (3) (Drawn Work (2)) a Pull out several threads from both sides of the - Brother International Quattro 2 6700D | Users Manual - English - Page 134
SEWING THE STITCHES One-step Buttonholes With one-step buttonholes, you can make buttonholes appropriate to the size of your button. Stitch Stitch name Narrow rounded buttonhole Presser foot Applications Buttonhole on light to medium weight fabrics Stitch width [mm (inch)] Auto Manual - Brother International Quattro 2 6700D | Users Manual - English - Page 135
SEWING THE STITCHES One-step buttonholes are sewn from the front of the presser foot to the back, as shown below. 3 Utility Stitches a Reinforcement stitching a Select a buttonhole stitch, buttonhole foot "A". and attach b Mark the position and length buttonhole on the fabric. of the c - Brother International Quattro 2 6700D | Users Manual - English - Page 136
the metal bracket on the buttonhole foot. a Buttonhole lever a Metal bracket f Gently hold the end of and then start sewing. the upper thread, * Feed pin. → Once sewing is completed, the machine automatically sews reinforcement stitches, and then stops. 134 a Eyelet punch b Basting - Brother International Quattro 2 6700D | Users Manual - English - Page 137
button diameter and thickness together, and then set the plate at the calculated value. a Upper thread b Lower the presser foot and start sewing. 3 a Presser foot scale b Button holder plate c Completed measurement of diameter + thickness d 5 mm (approx. 3/16 inch) Memo • For example, for a button - Brother International Quattro 2 6700D | Users Manual - English - Page 138
using the following 4 stitches together. You can sew any desired length for the buttonhole when using 4- foot Applications 4 steps buttonhole 1 Left side of 4 steps buttonhole Stitch width [mm (inch)] Auto Manual 5.0 1.5 - 7.0 (7/32) (1/16 - 1/4) Stitch length [mm (inch)] Auto Manual - Brother International Quattro 2 6700D | Users Manual - English - Page 139
length as the left. Utility Stitches h Select stitch to sew the bar tack and then press the "Start/Stop" button. → The machine will automatically sew off the bar tack tie and stop when the bar tack is complete. i Raise the fabric. presser foot and remove the j Refer to page 134 to open - Brother International Quattro 2 6700D | Users Manual - English - Page 140
Stitch length [mm (inch)] Auto Manual 7.0 (1/4) 2.5 - 7.0 2.0 0.4 - 2.5 (3/32 - 1/4) (1/16) (1/64 - 1/16) 7.0 (1/4) 2.5 - 7.0 2.0 0.4 - 2.5 (3/32 - 1/4) (1/16) (1/64 - 1/16) Twin needle NO NO Darning is performed by sewing from the front of the presser foot to the back as shown below - Brother International Quattro 2 6700D | Users Manual - English - Page 141
the presser foot. • Set the presser foot so that there is no gap behind the section marked with an "A" (the shaded area in the illustration below). If there is a gap, the size of the darning will not be correct. → Once sewing is completed, the machine automatically sews reinforcement stitches - Brother International Quattro 2 6700D | Users Manual - English - Page 142
Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto Manual 2.0 1.0 - 3.0 0.4 0.3 - 1.0 (1/16) (1/16 - 1/8) (1/64) (1/64 - 1/16) Twin needle NO a Select . b Attach buttonhole scale to the length foot "A" and set the of the bar tack you wish to sew. c Set the fabric so - Brother International Quattro 2 6700D | Users Manual - English - Page 143
the upper begin sewing. thread and a Presser foot b Thick paper 3 c Fabric Memo • If automatic thread cutting is turned on before you start sewing, both threads are setting. Utility Stitches → When sewing is completed, the machine will sew reinforcement stitches and stop automatically. 141 - Brother International Quattro 2 6700D | Users Manual - English - Page 144
Buttons with 2 or 4 holes can be attached, using the machine. Stitch Stitch name Button sewing Presser foot Applications Attaching buttons Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto Manual 3.5 2.5 - 4.5 (1/8) (3/32 - 3/16) - - Twin needle NO Note • Do not - Brother International Quattro 2 6700D | Users Manual - English - Page 145
foot and move the fabric so that the needle goes into the next two holes, and sew them in the same way. ■ Attaching a Shank to the Button a Pull the sewing the beginning and end bobbin thread from the of sewing together on the wrong side of the fabric. Note • When sewing is completed, be sure - Brother International Quattro 2 6700D | Users Manual - English - Page 146
either the stitch width display or the stitch length display to choose the size of the eyelet. d Lower the presser foot and start sewing. → When sewing is finished, the machine sews reinforcement stitches and stops automatically. Note • If the stitch pattern comes out poorly, make adjustments to - Brother International Quattro 2 6700D | Users Manual - English - Page 147
in the order shown in the illustration. * The fabric will move sideways, guide the fabric by hand to keep sewing straight. Utility Stitches b Select "N". and attach monogramming foot e Select and sew seam "3" as shown. Memo • For details on each stitch, refer to the "STITCH SETTING CHART" at - Brother International Quattro 2 6700D | Users Manual - English - Page 148
. a Select . Memo • For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. Note • Make sure you sew using the middle needle position. b Attach presser foot "J" and sew straight stitches up to the zipper opening. Change to a basting stitch (see page 98) and - Brother International Quattro 2 6700D | Users Manual - English - Page 149
causing injury. f Set the presser foot 1/8 inch) margin. in the 3 mm (approx. g Starting from the end of sew to a point about 50 the zipper opening, mm (approx. 2 inches) from the edge of the fabric, then stop the machine. h Pull down the zipper slider, then sewing to the edge of the - Brother International Quattro 2 6700D | Users Manual - English - Page 150
reattach it so that the left side of the pin is attached to the presser foot holder. * When sewing the left side of the zipper, the needle should drop on the right side of the presser foot. When sewing the right side of the zipper, the needle should drop on the left side of - Brother International Quattro 2 6700D | Users Manual - English - Page 151
cannot be sewn if this function is used when the edge of the fabric has corners as shown below. SEWING THE STITCHES b Attach "V". the vertical stitch alignment foot CAUTION • When edge sewing using the built-in camera, make sure that the room is evenly lit. If the brightness in the room - Brother International Quattro 2 6700D | Users Manual - English - Page 152
message shown below appears, check that the vertical stitch alignment foot "V" is attached and that the edge sewing sheet is positioned, and then press . 150 a Transparent sheet • Set a fully wound bobbin before starting to use the edge sewing feature and built-in camera. If you need to change - Brother International Quattro 2 6700D | Users Manual - English - Page 153
until the message "Recognizing..." disappears. g Place the fabric under the presser foot. h Move the fabric to the desired position edge sewing. Position the fabric so that for its edge is as straight as possible. SEWING THE STITCHES i Check that the built-in detecting the fabric. camera - Brother International Quattro 2 6700D | Users Manual - English - Page 154
camera cannot detect the edge of the fabric. Try to straighten the edge of the fabric at the beginning of sewing (so it is parallel with the edge of the presser foot). Note • If a straight part of fabric edge indicator line (shown below) does not follow the edge of the fabric, edge - Brother International Quattro 2 6700D | Users Manual - English - Page 155
sheet as a guide for positioning the fabric for edge sewing. 3 a Utility Stitches a Distance from edge of fabric Example: When a straight stitch is selected (example: ) a Scale on the edge sewing sheet k Lower the presser foot. → The distance from the edge of the fabric to the seam is set - Brother International Quattro 2 6700D | Users Manual - English - Page 156
starts with the set distance to the edge of the fabric maintained. * While sewing, use the red scale marks on the vertical stitch alignment foot "V" as a guide to keep a fixed distance from the edge of the fabric. m When sewing is between 1 and 2 cm (about 3/8 and 3/4 inch) from the edge of the - Brother International Quattro 2 6700D | Users Manual - English - Page 157
Vertical Mirror Image ...166 Creating a Horizontal Mirror Image ...167 Sewing a Pattern Continuously ...167 Changing Thread Density (for Satin Stitch the Computer to Create and Save Data 176 Saving Stitch Patterns in the Machine's Memory ...177 ■ If the Memory is Full...177 Saving Stitch Patterns - Brother International Quattro 2 6700D | Users Manual - English - Page 158
your own stitches with the "MY CUSTOM STITCH" function (see page 328) l Patterns stored in "MY CUSTOM STITCH" (see page 335) m Patterns saved in the machine's memory (see page 180) n Patterns saved in USB media (see page 181) o Patterns saved on the computer (see page 182) . Note • If the screen - Brother International Quattro 2 6700D | Users Manual - English - Page 159
SELECTING STITCH PATTERNS ■ Stitch Selection Screens There are 10 categories of Character/Decorative stitch patterns. If a page number such as more than one stitch selection screen for that category. appears, there is Decorative Stitch Patterns 7mm Decorative Stitch Patterns Satin Stitch - Brother International Quattro 2 6700D | Users Manual - English - Page 160
". 7mm Satin Stitch Patterns/ a Press , , or to Cross Stitch/Utility Decorative select a font. Stitch Patterns a Select the to sew. category of the pattern you want b Press the to sew. key of the stitch pattern you want * Press to view the next page. * Press to view the - Brother International Quattro 2 6700D | Users Manual - English - Page 161
from step a. ■ Deleting Characters 4 a Press to delete the last character. Character/Decorative Stitches f Press again and enter "S". a a Jumping stitch * Remove the jumping stitches after sewing. Memo • Characters are deleted individually starting with the last character entered. 159 - Brother International Quattro 2 6700D | Users Manual - English - Page 162
SELECTING STITCH PATTERNS b Select the correct character. b Press to adjust character spacing. ■ Adjusting the Character Spacing The space between the characters can be adjusted. a Press . → The character spacing window appears. * Press to increase the character spacing and press to decrease - Brother International Quattro 2 6700D | Users Manual - English - Page 163
stabilizer material. • Guide the fabric with your hand to keep the fabric feeding straight and even during sewing. Fabric When sewing on stretch fabrics, home sewing machine needle 90/14 Monogramming foot "N". Using another presser foot may give inferior results. Basic Sewing d Press the sewing. - Brother International Quattro 2 6700D | Users Manual - English - Page 164
Guide the fabric with your hand to keep the fabric feeding straight and even during sewing. e Press the sewing. "Start/Stop" button to stop f Press the "Reverse/Reinforcement Stitch" button to sew reinforcement stitches. Memo • When sewing character stitches, the machine automatically sews - Brother International Quattro 2 6700D | Users Manual - English - Page 165
b Attach monogramming the pattern. foot "N" and sew SEWING STITCH PATTERNS * If the pattern is bunched: Press button is pressed and the pattern will slide to the left. Character/Decorative Stitches e Sew the stitch pattern again. * If the stitch pattern still comes out poorly, make - Brother International Quattro 2 6700D | Users Manual - English - Page 166
EDITING STITCH PATTERNS EDITING STITCH PATTERNS ■ Key Functions You can create just the finish you want using the editing functions. Make patterns larger or smaller, make mirror images, etc. Note • Some editing functions cannot be used with certain stitch patterns. Only the functions for the - Brother International Quattro 2 6700D | Users Manual - English - Page 167
the machine lowers the needle and slightly raises the presser foot automatically. In addition, when sewing is restarted, the presser foot is lock key Press this key to lock the screen. When the screen is locked, the various 86 settings, such as the stitch width and stitch length, are locked - Brother International Quattro 2 6700D | Users Manual - English - Page 168
EDITING STITCH PATTERNS Changing the Size Select a stitch pattern, then press to change the size of the stitch pattern. The stitch pattern will be sewn in the size highlighted on the key. Memo • If you continue entering stitch patterns after changing the size, those patterns will also be sewn in - Brother International Quattro 2 6700D | Users Manual - English - Page 169
cannot change thread density for a combined pattern after additional patterns are added. Character/Decorative Stitches Memo • To finish a complete motif while sewing the pattern continuously, you can press the key while sewing. The machine will automatically stop when the motif is finished. 167 - Brother International Quattro 2 6700D | Users Manual - English - Page 170
character/decorative stitches, you can return to the beginning of the pattern after trial sewing or when the stitching is sewn incorrectly. a Press the "Start/Stop" button to stop the machine, and then press . Checking the Image You can display an approximate size image of the selected stitch - Brother International Quattro 2 6700D | Users Manual - English - Page 171
c Press to display the enlarged image. e Press EDITING STITCH PATTERNS to return to the original screen. Memo • You can also sew from this screen when the presser foot symbol is displayed. • Image of some patterns will display in default size only. 4 d Use / / / to view any part of the image - Brother International Quattro 2 6700D | Users Manual - English - Page 172
patterns of different sizes, mirror image stitch patterns, and others. Before Combining Single stitch sewing is automatically selected for sewing combined patterns. If you want to sew the pattern continuously, press after finishing the stitch pattern combination. When changing sizes, creating - Brother International Quattro 2 6700D | Users Manual - English - Page 173
large size stitch will be selected. b Press again, then press the small size. to select Character/Decorative Stitches f Press g Press to sew the pattern continuously. . Memo • Patterns are deleted individually starting with the last pattern entered by pressing . → The pattern is displayed - Brother International Quattro 2 6700D | Users Manual - English - Page 174
COMBINING STITCH PATTERNS c Press to sew continuously. b Press again, then press . → The entered pattern is repeated. Combining Horizontal Mirror Image Stitch Patterns Example: → The pattern is flipped along a vertical axis. c Press . a - Brother International Quattro 2 6700D | Users Manual - English - Page 175
Combining Stitch Patterns of Different Length Example: COMBINING STITCH PATTERNS c Press . 4 a Press , then press once. → The length of the image is set to . → The entered pattern is repeated. b Select again, then press 3 times. Character/Decorative Stitches → The length of the image - Brother International Quattro 2 6700D | Users Manual - English - Page 176
COMBINING STITCH PATTERNS Making Step Stitch Patterns (for 7mm Satin Stitch Patterns Only) You can use the keys with 7mm satin stitch patterns to create a step effect. Stitch patterns sewn so that they create a step effect are called step stitch patterns. * Press to move the stitch pattern a - Brother International Quattro 2 6700D | Users Manual - English - Page 177
e Press . COMBINING STITCH PATTERNS Press → → → . → The entered pattern is repeated. ■ More Examples Press → → → → . Press → → → → → → → → . 4 Character/Decorative Stitches Press → → → → → → → → . 175 - Brother International Quattro 2 6700D | Users Manual - English - Page 178
(SD) Card • CompactFlash • Memory Stick • Smart Media • Multi Media Card (MMC) • XD-Picture Card Note • Some USB media may not be usable with this machine. Please visit our website for more details. • The access lamp will begin blinking after inserting USB Devices/Media, and it will take about 5 to - Brother International Quattro 2 6700D | Users Manual - English - Page 179
memory, the memory is too full to hold the currently selected stitch pattern. To save the stitch pattern in the machine's memory, you have to delete a previously saved stitch pattern. a Press . * Press to return to the original screen without saving. 4 Character/Decorative Stitches b Choose - Brother International Quattro 2 6700D | Users Manual - English - Page 180
* If you decide not to delete the stitch pattern, press . Saving Stitch Patterns to USB Media When sending stitch patterns from the machine to USB media, plug the USB media into the machine's top USB port. Memo • USB media is commercially available, but some USB media may not be usable with this - Brother International Quattro 2 6700D | Users Manual - English - Page 181
of stitch patterns can be saved in the "Removable disk", but the saved stitch patterns are deleted when the machine is turned OFF. a Primary (top) USB port for media b USB media Note • The processing speed computer (or USB hub), refer to the instruction manual for the corresponding equipment. 179 - Brother International Quattro 2 6700D | Users Manual - English - Page 182
THE MEMORY FUNCTION c Press . e Select the stitch pattern's .pmx copy the file to the computer. file and Note • Do not turn off the machine while the "Saving" screen is showing. You may lose the data. d Press * Press saving. . to return to the original screen without Retrieving Stitch - Brother International Quattro 2 6700D | Users Manual - English - Page 183
stitch pattern. a Insert the USB Media into the primary (top) USB port on the machine (see page 178). a a Saved stitch patterns c Press * Press . to delete the → The selected stitch pattern is retrieved and the sewing screen will be displayed. → Stitch patterns and a folder in a top - Brother International Quattro 2 6700D | Users Manual - English - Page 184
USB media. a c → The selected stitch pattern is recalled and the sewing screen will be displayed. b Recalling from the Computer a Folder name b * Use the computer to create folders. Folders cannot be created with the machine. d Press the to recall. key of the stitch pattern you want - Brother International Quattro 2 6700D | Users Manual - English - Page 185
recalled. d Press . → The selected stitch pattern is recalled and the sewing screen will be displayed. 4 Note • The pattern recalled from the computer is only temporarily written to the machine. It is erased from the machine when the machine is turned off. If you wish to keep the stitch pattern - Brother International Quattro 2 6700D | Users Manual - English - Page 186
USING THE MEMORY FUNCTION 184 - Brother International Quattro 2 6700D | Users Manual - English - Page 187
VIEWING THE SEWING SCREEN 198 ■ Key Functions 199 PREPARING THE FABRIC 200 Attaching Iron-on Stabilizers (Backing) to the Fabric 200 Hooping the Fabric in the Embroidery Frame 202 ■ Types of Embroidery Frames 202 ■ Inserting the Fabric 203 ■ Using the Embroidery Sheet 204 Embroidering Small - Brother International Quattro 2 6700D | Users Manual - English - Page 188
BEFORE EMBROIDERING BEFORE EMBROIDERING Embroidery Step by Step Follow the steps below to prepare the machine for embroidery. Step 9 Step 3 Step 6, 8 Step 1, 2 Step # 1 2 3 4 5 6 7 8 9 Aim Presser foot attachment Checking the needle Embroidery unit attachment Bobbin thread setup Fabric - Brother International Quattro 2 6700D | Users Manual - English - Page 189
Attaching Embroidery Foot "W" BEFORE EMBROIDERING d Push the black button on the presser holder and remove the presser foot. foot Press → → → → in this order to display a video example of attaching embroidery foot "W" (see page 46). Follow the steps explained below to complete the - Brother International Quattro 2 6700D | Users Manual - English - Page 190
result. • To avoid distorting your embroidery design, do not touch the embroidery carriage and frame when the machine is embroidering. 188 a Embroidery unit connection b Machine connection port Note • Be sure there is no gap between the embroidery unit and the sewing machine. If there is a gap, the - Brother International Quattro 2 6700D | Users Manual - English - Page 191
. → The following message will appear. d Press . BEFORE EMBROIDERING c Hold down the release button, and pull the embroidery unit away from the machine. → The carriage will move to the initialization position. ■ Removing the Embroidery Unit a Press either or , then press . → The carriage - Brother International Quattro 2 6700D | Users Manual - English - Page 192
patterns stored in the sewing machine and embroidery cards are intended embroidery patterns stored in the machine's memory (see the "QUICK REFERENCE GUIDE" for a full summary of patterns in the machine's memory). You can also use patterns from the embroidery cards (sold separately). Once the machine - Brother International Quattro 2 6700D | Users Manual - English - Page 193
7 categories of patterns in this machine. If a page number such as pattern selection screen for that category. SELECTING PATTERNS appears, there is more than one Embroidery patterns Greek alphabet patterns Floral alphabet patterns Utility embroidery patterns Frame patterns Alphabet characters - Brother International Quattro 2 6700D | Users Manual - English - Page 194
SELECTING PATTERNS Brother "Exclusives" Vintage designs New European designs Quilt designs Monogram designs Japanese designs 192 - Brother International Quattro 2 6700D | Users Manual - English - Page 195
the key of the category of you want to embroider. the pattern b Press the key embroider. of the pattern you want to d Press . 5 → The sewing screen is displayed. Embroidery e Proceed to "VIEWING THE SEWING SCREEN" on page 198 to embroider the pattern. * To return to the previous - Brother International Quattro 2 6700D | Users Manual - English - Page 196
SELECTING PATTERNS Selecting Alphabet Character Patterns Example: Entering "Blue Sky". a Press . b Press the key embroider. of the font you want to c Press to change the selection screens. d Press and then enter "B". * If you want to change the size of a character, - Brother International Quattro 2 6700D | Users Manual - English - Page 197
f Press to enter a space. h Press SELECTING PATTERNS and then enter "ky". g Press again and enter "S". i Press . 5 Embroidery → The sewing screen is displayed. 195 - Brother International Quattro 2 6700D | Users Manual - English - Page 198
→ The selected pattern is displayed on the screen. d Press . Selecting Frame Patterns a Press . → The sewing screen is displayed. e Proceed to "VIEWING THE SEWING SCREEN" on page 198 to embroider the pattern. * To return to the previous screen to select another pattern, press . b Press - Brother International Quattro 2 6700D | Users Manual - English - Page 199
Card Reader (Sold Separately) and USB Card Writer Module* • Use only an embroidery card Reader designed for this machine. Using an unauthorized embroidery card Reader may cause your machine to operate incorrectly. * If you have purchased the PE-DESIGN Ver5 or later, PE-DESIGN Lite or PED-BASIC, you - Brother International Quattro 2 6700D | Users Manual - English - Page 200
VIEWING THE SEWING SCREEN VIEWING THE SEWING SCREEN f g a h i b c j d k e l a Shows the presser foot code. Attach embroidery foot "W" for all embroidery projects. When the foot presser symbol is displayed on the screen, you are able to sew. b Shows the boundary for embroidering with the - Brother International Quattro 2 6700D | Users Manual - English - Page 201
letter when sewing alphabet 245 character patterns. u Memory key Press this key to save a pattern in the machine's memory, embroidery frame moves 216 to the desired position so you can check that there is enough space to sew the pattern. Q Embroidery Press this key to align the embroidering - Brother International Quattro 2 6700D | Users Manual - English - Page 202
you can sew more attractive embroidery by adjusting the embroidery presser foot height in the embroidery settings embroidery projects, always use stabilizer material for embroidery. Follow the package instructions for the stabilizer being used. Press → → → → in this order to display a video - Brother International Quattro 2 6700D | Users Manual - English - Page 203
of the fabric. material to the a Fusible side of stabilizer b Fabric (wrong side) Memo • When embroidering on thin fabrics such as organdy or lawn, or on napped fabrics such as towel or corduroy, use in water, giving the project a more attractive finish. PREPARING THE FABRIC 5 Embroidery 201 - Brother International Quattro 2 6700D | Users Manual - English - Page 204
PREPARING THE FABRIC Hooping the Fabric in the Embroidery Frame ■ Types of Embroidery Frames Extra Large Quilt Medium Small Embroidery field 30 cm × 20 cm (approx. 12 inches × 8 inches) Use when embroidering connected or combined characters or patterns, or when embroidering large patterns. - Brother International Quattro 2 6700D | Users Manual - English - Page 205
video example of hoping the fabric in the embroidery frame (see page 46). Follow the steps explained below to complete the operation. Note • If the fabric is not securely held in the embroidery frame, the embroidery design will sew frames are even before you start embroidering. a Outer frame b Inner - Brother International Quattro 2 6700D | Users Manual - English - Page 206
when you loosen or tighten the frame adjustment screw. a Inner frame b Guide line c Gently stretch the fabric so there are no folds or wrinkles, and press the inner frame into the outer frame. ■ Using the Embroidery Sheet When you want to embroider the pattern in a particular place, use the - Brother International Quattro 2 6700D | Users Manual - English - Page 207
or a temporary spray adhesive. Use an embroidery stabilizer to provide extra support. After embroidering, remove the stabilizer carefully. Attach the stabilizer as shown in the following examples. We recommend using a stabilizer for embroidery. ■ Embroidering Small Fabrics Use a temporary spray - Brother International Quattro 2 6700D | Users Manual - English - Page 208
order to display a video example of attaching the embroidery frame (see page 46). Follow the steps explained below to complete the operation. Note • Wind and insert the bobbin before attaching the embroidery frame. a Press the "Presser Foot raise the presser foot. Lifter" button to d Lower - Brother International Quattro 2 6700D | Users Manual - English - Page 209
■ Removing the Embroidery Frame a Raise the frame-securing lever. ATTACHING THE EMBROIDERY FRAME b Pull the embroidery frame toward you. 5 Embroidery 207 - Brother International Quattro 2 6700D | Users Manual - English - Page 210
placement on the garment, you can check the layout before starting embroidery. Aligning the Embroidering Position Using the Built-In Camera b Hoop the fabric. The camera built into this machine can be used to easily align the embroidering position. This is useful for patterns which need to be - Brother International Quattro 2 6700D | Users Manual - English - Page 211
THE PATTERN POSITION c Select the pattern on your sewing machine. d Press in the sewing screen. f Press . g Press the "Presser Foot Lifter" button to lower the presser foot. h Press . i Press the positioning keys to move the embroidery frame until the cross-shaped chalk mark drawn on - Brother International Quattro 2 6700D | Users Manual - English - Page 212
keys to move the embroidery frame until the center point of the pattern in the camera view window is aligned with the chalk mark drawn on the fabric. m Press screen. to return to the previous n Press the "Start/Stop" button to begin embroidering. * See "Sewing Embroidery Patterns" on page 219 - Brother International Quattro 2 6700D | Users Manual - English - Page 213
the embroidering position. Install medium embroidery frame or larger. • For details on using thicker fabric such as quilting, refer to "Positioning the Pattern on Thick Fabric" (page 213). a Hoop the fabric in the embroidery frame, then attach the frame to the embroidery and machine. b Select - Brother International Quattro 2 6700D | Users Manual - English - Page 214
for the pattern, the pattern can be moved if it is necessary. g Press the "Start/Stop" embroidering. button to start * See "Sewing Embroidery Patterns" on page 219. → When embroidery is finished, the fabric displayed in the background disappears. Whether the fabric disappears or remains - Brother International Quattro 2 6700D | Users Manual - English - Page 215
is functional only when the fabric is scanned. It will not affect embroidering if it is turned on with normal embroidery. a Hoop the fabric in the embroidery frame, then attach the frame to the embroidery and machine. b Select the pattern, and then press . c Display page 8/8 of the Settings - Brother International Quattro 2 6700D | Users Manual - English - Page 216
scrap piece of the fabric to be used. b After selecting the pattern, press , and then press . → A window appears so that the area containing the embroidery positioning sticker can be selected. Note • Scanning cannot start from the center after an area has been selected. To scan from the center - Brother International Quattro 2 6700D | Users Manual - English - Page 217
following warning message appears, touch and reposition the embroidery positioning sticker so the pattern is within the embroidery field, and then press again. g Press the "Start/Stop" embroidering. button to begin * See "Sewing Embroidery Patterns" on page 219. Note • After the included - Brother International Quattro 2 6700D | Users Manual - English - Page 218
will move to the selected position on the pattern. Memo • To see the entire embroidering area, press . The embroidery frame moves and shows the embroidery area. 216 CAUTION • Make sure the needle is up when the embroidery frame is moving. If the needle is down, it could break and result in injury - Brother International Quattro 2 6700D | Users Manual - English - Page 219
be embroidered appears. b Press used in the preview. to select the frame * Frames displayed in light gray cannot be selected. * Press to enlarge the image of the pattern. * The pattern can be sewn as it appears in the following display. 5 Embroidery Memo • You can begin sewing from this - Brother International Quattro 2 6700D | Users Manual - English - Page 220
If you use threads other than those listed above, the embroidery may not sew out correctly. Bobbin case Standard bobbin case (green marking on the screw) is in the machine for sewing and embroidery. The bobbin case originally installed in the machine has a green marking on the screw. Do not adjust - Brother International Quattro 2 6700D | Users Manual - English - Page 221
below. SEWING AN EMBROIDERY PATTERN Sewing Embroidery Patterns Example: b a a Groove b Projection c Notch To remove the embroidery needle plate sewn. a Thread the color, pass machine with thread for the first the thread through the hole in embroidery foot "W", pull out some thread to give it - Brother International Quattro 2 6700D | Users Manual - English - Page 222
SEWING AN EMBROIDERY PATTERN b Lower the presser foot, then press the "Start/Stop" button to start embroidering. After 5-6 stitches, press the "Start/Stop" button again to stop the machine. c Trim the excess thread seam. If the end of the at the end of the seam is under the presser foot, - Brother International Quattro 2 6700D | Users Manual - English - Page 223
plan to use when attaching the appliqué in step g. a Outline of appliqué b Appliqué material Memo • The embroidery procedure is the same as the basic procedure explained on page 219. → The machine will sew around the outline of the appliqué pieces and will then stop. a Position of appliqué b Base - Brother International Quattro 2 6700D | Users Manual - English - Page 224
SEWING AN EMBROIDERY PATTERN f Apply a thin layer of adhesive to the back adhesive embroidering. then carry out Memo • Some glue may get onto the presser foot, needle, and needle plate at this time. Finish embroidering the appliqué pattern and then clean away the glue. • For best sewing - Brother International Quattro 2 6700D | Users Manual - English - Page 225
. → See "Printing the Background and Embroidery Position Sheet" on page 226. Step4 Hoop in the embroidery frame the fabric with the background image ironed on or printed, check the embroidering position, and then start embroidering. → See "Sewing Embroidery Patterns" on page 227. Note • Print - Brother International Quattro 2 6700D | Users Manual - English - Page 226
Press . Memo • Refer to the Quick Reference Guide for the detail of patterns which enable this function. a Press the key embroider. of the pattern you want to → Only the embroidery pattern (not the background image of the selected embroidery pattern) is displayed. → An image of the - Brother International Quattro 2 6700D | Users Manual - English - Page 227
on printing, refer to the operating instructions for your printer.) → Two files of the background image only and one file for aligning embroidery into position are copied (PDF format) onto the USB media. Memo • Do not remove the USB media from the machine until data output is finished. d Remove - Brother International Quattro 2 6700D | Users Manual - English - Page 228
. Memo • Do not disconnect the USB cable from the machine until data output is finished. d Copy the image data saved in "Removable Disk" into a different file before closing. Printing the Background and Embroidery Position Sheet a USB port for computer b USB cable connector → The "Removable - Brother International Quattro 2 6700D | Users Manual - English - Page 229
on transfer sheet is selected as the paper. For details, refer to the instructions for the printer being used. c Print the embroidery position sheet named E_1p.pdf) onto plain paper. (file Sewing Embroidery Patterns a Hoop in the embroidery frame the with the background image ironed fabric on - Brother International Quattro 2 6700D | Users Manual - English - Page 230
DESIGNS) d After checking that a pattern is selected, press . → The sewing screen appears. Note • Before embroidering, check that the embroidery position sheet is perfectly aligned with the background. e Align the embroidering position according to steps b through f of "Using the Built- In - Brother International Quattro 2 6700D | Users Manual - English - Page 231
not to bump the embroidery unit carriage or the presser foot when removing or attaching the embroidery frame. Otherwise, the pattern will not embroider correctly. If the Bobbin Runs Out of Thread When the bobbin begins to run out of thread during embroidering, the machine will stop and the - Brother International Quattro 2 6700D | Users Manual - English - Page 232
EMBROIDERY PROCESS If the Thread Breaks During Sewing a Press the "Start/Stop" machine. button to stop the b If the upper thread is broken, redo the upper threading. If the bobbin where the thread broke. d Press the "Presser Foot lower the presser foot. Lifter" button to e Press → The - Brother International Quattro 2 6700D | Users Manual - English - Page 233
b Follow the instructions shown on the and remove the embroidery frame. screen → The following message will appear. → The embroidery frame moves, returning the needle to the pattern's beginning position. c Press the "Presser Foot Lifter" button to lower the presser foot and start sewing. 231 - Brother International Quattro 2 6700D | Users Manual - English - Page 234
PROCESS c Attach the embroidery frame and press . → The previous sewing screen displayed before the machine was turned off appears. Memo • If you want to start a new embroidery pat- tern, press so the pattern selection screen appears. d Continue embroidering. a a Stitch number when - Brother International Quattro 2 6700D | Users Manual - English - Page 235
machine may stop dur- ing sewing. This is not the sign of a malfunc- tion. Increase the thread tension slightly, and begin sewing again. b Press to weaken the upper thread Embroidery in the bobbin thread being visible from the right side of the fabric. Note • If the bobbin thread was - Brother International Quattro 2 6700D | Users Manual - English - Page 236
function, using the alternate bobbin case (with no color on the screw), turn the slotted screw (-) with a (small) screwdriver. c Press . Note • With "Embroidery Tension" on page 6/8 of the setting screen, the tension of the upper thread can be adjusted for embroidering. The selected setting will - Brother International Quattro 2 6700D | Users Manual - English - Page 237
thread at the end of sewing each color. This function is initially turned on. To turn this function off, press key and then . This function can be turned on or off during embroidering. * This setting returns to its default when the machine is turned off. a Press . ■ Bobbin Thread is Too Tight - Brother International Quattro 2 6700D | Users Manual - English - Page 238
MAKING EMBROIDERY ADJUSTMENTS Using the Thread Trimming Function (JUMP STITCH TRIM) b , press key and then . This function can be turned on or off during embroidering. * Your customized setting remains after turning the machine off and on. a Jump stitch Note • When this function is turned on, - Brother International Quattro 2 6700D | Users Manual - English - Page 239
Memo • SPM is the number of stitches sewn in one minute. • Decrease the sewing speed when embroidering on thin, thick, or heavy fabrics. • The sewing speed can be changed while embroidery is being sewn. • The maximum sewing speed setting does not change until a new setting is selected. The setting - Brother International Quattro 2 6700D | Users Manual - English - Page 240
, use to select from six embroidery thread brands pictured below. Changing the Embroidery Frame Display a Press . b Press . c In the "Embroidery Frame Display", use to change the embroidery frame display mode. * There are 14 choices. EMBROIDERY / POLYESTER THREAD# COUNTRY/COTTON THREAD - Brother International Quattro 2 6700D | Users Manual - English - Page 241
cm (12 inches × 8 inches) b Center mark c Quilt frame embroidering area 20 cm × 20 cm (8 inches × 8 inches) d Embroidery area for optional large embroidery frame 18 cm × 13 cm (7 inches × 5 inches) e Embroidering area for optional border embroidery frame 18 cm × 10 cm (7 inches × 4 inches) f Medium - Brother International Quattro 2 6700D | Users Manual - English - Page 242
PATTERN CAUTION • When you have revised the pattern, check the display of available embroidery frames and use an appropriate frame. If you use an embroidery frame not displayed as available for use, the presser foot may strike the frame and possibly cause injury. Moving the Pattern Use to move - Brother International Quattro 2 6700D | Users Manual - English - Page 243
THE PATTERN d Press . e Use to align the needle and the mark on the fabric, and begin embroidering the pattern. b Press . Changing the Size of the Pattern a Press . 5 Embroidery c Press . a b a Start position b This key is used for aligning linked characters (see page 245). → The - Brother International Quattro 2 6700D | Users Manual - English - Page 244
REVISING THE PATTERN * Press to stretch the pattern vertically. * Press to compact the pattern vertically. * Press to return the pattern to its original appearance. a Rotating the Pattern a Press . a Size of the pattern Memo • Some patterns or characters can be enlarged more than others - Brother International Quattro 2 6700D | Users Manual - English - Page 245
so it appears as to create a horizontal mirror image of the selected pattern. Press again to return the pattern to normal. a a Degree of rotation 5 Embroidery 0° Memo • You can rotate the pattern by rotating the mouse wheel. Rotate the mouse wheel away from you to rotate the pattern 10 degrees - Brother International Quattro 2 6700D | Users Manual - English - Page 246
REVISING THE PATTERN Changing the Density (Alphabet Character and Frame Patterns Only) The thread density for some alphabet character and frame patterns can be changed. A setting between 80% and 120% in 5% increments can be specified. a Press . b Change the density. * Press to make the - Brother International Quattro 2 6700D | Users Manual - English - Page 247
with each letter in a different color. If "MULTI COLOR" is set, the machine stops after each character is sewn so that the thread can be changed to a , and then sew the next character. Embroidery 5 Embroidering Linked Characters Follow the procedure described below to embroider linked characters in - Brother International Quattro 2 6700D | Users Manual - English - Page 248
and return the starting point to the center of the pattern, press . • Use to select a different starting point for embroidering. d Press . e Press . → The needle is positioned in the lower-left corner of the pattern. The embroidery frame moves so that the needle is positioned correctly. 246 - Brother International Quattro 2 6700D | Users Manual - English - Page 249
"Start/Stop" button. h After the characters are embroidered, cut the threads to a generous length, remove the embroidery frame, and then attach the embroidery frame again so that the remaining characters ("DEF") can be embroidered. 5 Embroidery → The needle is positioned in the lower-left - Brother International Quattro 2 6700D | Users Manual - English - Page 250
THE PATTERN n Press the "Start/Stop" button to begin embroidering the remaining character patterns. Uninterrupted Embroidering (Using a Single Color) A selected pattern can be stitched out in one color instead of multicolor. The machine will hesitate but not stop between color steps, and then - Brother International Quattro 2 6700D | Users Manual - English - Page 251
Data that can be Used • Only .pes,.pha,.phb,.phc, and .dst embroidery data files can be used with this machine. Using data other than that saved using our data design systems or sewing machines may cause the embroidery machine to malfunction. ■ Types of USB Devices/Media that can be Used Stitch - Brother International Quattro 2 6700D | Users Manual - English - Page 252
data is stored in a folder in "Removable Disk", that embroidery data cannot be retrieved by the machine. • Even if the embroidery unit is not attached, the machine will recognize embroidery data. ■ Tajima (.dst) Embroidery Data • .dst data is displayed in the pattern list screen by file name - Brother International Quattro 2 6700D | Users Manual - English - Page 253
THE MEMORY FUNCTION Saving Embroidery Patterns in the Machine's Memory You can save embroidery patterns that you have customized and will use often; for example, your name, patterns that have been rotated or had the size changed, patterns that have had the sewing position changed, etc. A total - Brother International Quattro 2 6700D | Users Manual - English - Page 254
Saving Embroidery Patterns to USB Media When sending embroidery patterns from the machine to USB media, plug the USB media into the machine's USB the machine's USB port. • The USB media can be inserted or removed at any time. a Press when the pattern you want to save is in the sewing screen. - Brother International Quattro 2 6700D | Users Manual - English - Page 255
USB cable can be plugged into the USB ports 5 on the computer and embroidery machine whether or not they are turned on. Embroidery c Press * Press saving. . to return to the original screen without the computer (or USB hub), refer to the instruction manual for the corresponding equipment. 253 - Brother International Quattro 2 6700D | Users Manual - English - Page 256
FUNCTION c Press when the pattern you want to save is in the sewing screen. Retrieving Patterns from the Machine's Memory a Press . d Press * Press saving. . to return to the original screen without → The machine displays the patterns currently in the memory. b Press the retrieve. key - Brother International Quattro 2 6700D | Users Manual - English - Page 257
Embroidery patterns and a folder in a top folder are displayed. → The sewing screen is displayed. Recalling from USB Media You can recall a specific embroidery USB port on the machine (see page 252). c a Primary (top) USB port for media b USB media a Folder name b Embroidery patterns in USB media - Brother International Quattro 2 6700D | Users Manual - English - Page 258
pattern data to "Removable → Pattern data in "Removable Disk" is written to the machine. Note • While data is being written, do not discon- nect the USB cable. data within folders cannot be recalled. d Press . → The sewing screen is displayed. Recalling from the Computer a Plug the USB - Brother International Quattro 2 6700D | Users Manual - English - Page 259
e Press the recall. key of the pattern you want to * Press to return to the original screen. USING THE MEMORY FUNCTION f Press . 5 → The sewing screen is displayed. Embroidery 257 - Brother International Quattro 2 6700D | Users Manual - English - Page 260
EMBROIDERY APPLICATIONS EMBROIDERY APPLICATIONS Using a Frame Pattern to Make an Appliqué (1) b Embroider the same pattern onto the base fabric. from step a You can use framed patterns of the same size and shape to create an appliqué. Embroider one pattern with a straight stitch and one - Brother International Quattro 2 6700D | Users Manual - English - Page 261
a Frame Pattern to Make an Appliqué (2) This is a second method to make appliqué using embroidery patterns. You do not have to change the fabric in the embroidery frame using this method. Embroider one pattern with a straight stitch and one pattern with a satin stitch. a Select a straight stitch - Brother International Quattro 2 6700D | Users Manual - English - Page 262
pattern. • If you change the size or position of the patterns when selecting them, make a note of the size and location. a Appliqué material f Reattach the embroidery frame to the embroidery unit, and embroider the satin stitch pattern to create an appliqué. 260 - Brother International Quattro 2 6700D | Users Manual - English - Page 263
details on creating split embroidery patterns and for more detailed sewing instructions, refer to the operation manual included with PE-DESIGN Ver.7 or later. The following procedure describes how to read the split embroidery pattern shown below from USB media and embroider it. b Select section to - Brother International Quattro 2 6700D | Users Manual - English - Page 264
/Stop" the pattern section. button to embroider f When embroidering is finished, the following screen appears. Press . → A screen appears so that a section of the split embroidery pattern can be selected. g Repeat steps b through f to embroider the remaining sections of the pattern. 262 - Brother International Quattro 2 6700D | Users Manual - English - Page 265
Selecting Embroidery Patterns/Brother "Exclusives"/Greek Alphabet Patterns/Floral Alphabet Patterns/Utility Embroidery Patterns embroidery patterns 297 Sewing Combined Patterns 298 VARIOUS EMBROIDERING FUNCTIONS....299 Uninterrupted Embroidering (Using a Single Color) ....... 299 Basting Embroidery - Brother International Quattro 2 6700D | Users Manual - English - Page 266
This machine can perform the 11 functions listed below. ■ Print and Stitch (Combining Embroidery Patterns and Printed Designs) You can create beautiful three-dimensional embroidered designs by ironing a background onto fabric or printing it onto printable fabric, then sewing complementary embroidery - Brother International Quattro 2 6700D | Users Manual - English - Page 267
machine for embroidery according to the instructions on page 186, and press to display the screen below. , then a b c e d f g h j i k a Embroidery patterns b Brother . Embroidery Edit 6 Note • You can also sew Utility Stitches or Character/Decorative Stitches with the embroidery unit - Brother International Quattro 2 6700D | Users Manual - English - Page 268
SELECTING PATTERNS TO EDIT Selecting Embroidery Patterns/ Brother "Exclusives"/Greek Alphabet Patterns/Floral Alphabet Patterns/Utility Embroidery Patterns/Frame Patterns a Select the category of the pattern. Selecting Alphabet Character Patterns When you select character patterns from the - Brother International Quattro 2 6700D | Users Manual - English - Page 269
d Select the layout. (Example: ) When selecting an arc, use and to change the degree of the arc. * Press to make the arc flatter. → The embroidery edit screen will appear. g Proceed to "EDITING PATTERNS" page 268 to edit the pattern. on * Press to make the arc rounder. 6 Memo • When - Brother International Quattro 2 6700D | Users Manual - English - Page 270
EDITING PATTERNS EDITING PATTERNS d d a a b b c e c e a Shows the size of the entire combined pattern. b Shows the size of the pattern currently selected. c Shows the distance from the center of the frame. d Shows the color sequence and times of each step of the pattern currently selected. - Brother International Quattro 2 6700D | Users Manual - English - Page 271
to select a part of the 297 pattern to edit. j Sewing key Press this key to call up the sewing screen. 294 k Array key Press this key to change the to return the pattern to its original position.) Embroidery Edit 6 p Magnify key Press this key to magnify the pattern by 200% in the - Brother International Quattro 2 6700D | Users Manual - English - Page 272
needle drop point pattern is not entirely maintained. Use the normal resizing mode depending on the results of trial embroidering. c Press . d Press mode ( to enter Stitch Recalculator ). Note • Be sure to sew trial embroidery using same fabric and threads as project in order to check the - Brother International Quattro 2 6700D | Users Manual - English - Page 273
dense. to make the pattern more dense. g Press . h Press . Note • Depending on the pattern, embroidering may not be possible at the appropriate thread density. Before sewing on your project, be sure to sew trial embroidery on a piece of scrap fabric that is the same as the fabric used in the - Brother International Quattro 2 6700D | Users Manual - English - Page 274
EDITING PATTERNS Deleting the Pattern b Check the displayed pattern. Press to delete the pattern from the screen. Displaying Patterns in the Screen Magnified by 200% → Use display in any direction. to scroll through the c To display the pattern back to the normal size (100%), press . a Press - Brother International Quattro 2 6700D | Users Manual - English - Page 275
Changing the Configuration of Alphabet Character Patterns a Press . EDITING PATTERNS Changing Alphabet Character Spacing a Press . b Press the key embroider. of the layout you want to * See page 267 for more information about layout types. → The display will show the selected layout. - Brother International Quattro 2 6700D | Users Manual - English - Page 276
narrowest character in the group. Note • It is not recommended to edit data and transfer to other or older version machines. Same features do not apply in other machines, so problems may occur. • Character spacing can be reduced only when characters are arranged normally on a straight line. 274 - Brother International Quattro 2 6700D | Users Manual - English - Page 277
, and then press to separate it. For this example, the pattern will be separated between "T" and "a". b Press . Note • A separated character pattern cannot be combined again. 6 Embroidery Edit → The key appears as . 275 - Brother International Quattro 2 6700D | Users Manual - English - Page 278
the Color of Each Alphabet Character in a Pattern a Press so you can assign a thread color to each character. e Press . b Change the thread a different color. to sew each character in * Press to change the colors in the - Brother International Quattro 2 6700D | Users Manual - English - Page 279
in the machine. a In the pattern editing screen, press . a → The thread color palette screen displays. b Press or to put the color you want to change at the top of the sewing order. a a Color palette → The selected color appears at the top of the sewing order. 6 Embroidery Edit a 64 - Brother International Quattro 2 6700D | Users Manual - English - Page 280
thread colors that you most often use. You can select thread colors from the machine's extensive list of thread colors from nine different thread brands. You can select data can be downloaded from our website " http:// solutions.brother.com ". a b a Custom thread table b Press to recall the custom - Brother International Quattro 2 6700D | Users Manual - English - Page 281
Use to select one of the thread e Press . brands in the machine. EDITING PATTERNS b a d Use to enter a color's 4-digit palette, press . * To delete all the specified color from the palette, press . Embroidery Edit Note • You can save the created custom thread table data. Refer to "Saving - Brother International Quattro 2 6700D | Users Manual - English - Page 282
table data file to USB media. Note • Custom thread table data can only be saved to USB media. You cannot save the data in the machine's memory or in the computer. • Custom thread table data is saved as ".pcp" data file. a Press and then press . b Press to display the thread list - Brother International Quattro 2 6700D | Users Manual - English - Page 283
port for media b USB media Note • Two USB media cannot be used with this machine at the same time. If two USB media are inserted, only the USB media inserted USB port for media b USB media b Press and then press . 6 Embroidery Edit → The "Saving" screen is displayed. When the data is saved, - Brother International Quattro 2 6700D | Users Manual - English - Page 284
custom thread table. a Press . → The "Saving" screen is displayed. When the data is loaded to the machine, the display returns to the original screen automatically. Note • Do not insert or remove USB media while "Saving" change or at the to put the color you want top of the sewing order. 282 - Brother International Quattro 2 6700D | Users Manual - English - Page 285
the screen with the touch pen. With the color shuffling function, the machine suggests new color schemes for the embroidery pattern that you have selected. After you select the desired effect from . Refer to "Creating a Custom Thread Table" on the operation manual of the machine for the detail. 283 - Brother International Quattro 2 6700D | Users Manual - English - Page 286
the number of thread changes for the pattern you selected. • If an error message appears in this step, refer to page 349. a a Press to review the previous schemes. Note • Maximum 10 pages of schemes can be reviewed. After 10 pages of schemes, the oldest page is deleted every time you press . 284 - Brother International Quattro 2 6700D | Users Manual - English - Page 287
* Press or to display the other color schemes. Designing Repeated Patterns ■ Sewing Repeated Patterns Using the border function, you can create stitches using repeated patterns. a Select a pattern, and then press . b Press . → The embroidery edit screen will appear. 6 Embroidery Edit 285 - Brother International Quattro 2 6700D | Users Manual - English - Page 288
EDITING PATTERNS c Select the direction will be repeated. in which the pattern d Use to repeat the pattern on top and to repeat the pattern at the bottom. * To delete the top pattern, press . * To delete the bottom pattern, press . a c e e Adjust the spacing of the repeated pattern. - Brother International Quattro 2 6700D | Users Manual - English - Page 289
pattern. See the following section on how to repeat one element of a repeated pattern. → The pattern direction indicator will change depending on the direction selected. 6 Embroidery Edit 287 - Brother International Quattro 2 6700D | Users Manual - English - Page 290
EDITING PATTERNS b Use and to select the cut line. d Press . e Use repeat. and to select the element to → The cut line will move. c Press . → The repeated pattern will be divided into separate elements. 288 - Brother International Quattro 2 6700D | Users Manual - English - Page 291
Press to automatically change the sewing order of colors in combined border embroidery patterns so that the same color can be continuously sewn. This allows you to continue sewing without repeatedly changing the upper thread or changing the sewing order manually. Memo • In combined stitch - Brother International Quattro 2 6700D | Users Manual - English - Page 292
a series of patterns, use the point of this arrow for positioning the following designs to be sewn. Memo • When repeatedly sewing individual patterns, thread marks can be sewn around the perimeter of the pattern only. a Press . c Press sewn. b Press . to select the thread mark to be - Brother International Quattro 2 6700D | Users Manual - English - Page 293
repeated pattern, rehoop the embroidery frame and keep sewing for the next pattern. Memo • The optional border frame allows you to easily rehoop the fabric without removing the embroidery frame from the machine. EDITING PATTERNS c Press the "Start/Stop" embroidering. button to begin → When - Brother International Quattro 2 6700D | Users Manual - English - Page 294
the pattern. l Press the positioning keys to move the embroidery frame until the thread mark on the fabric is aligned on the starting point in the camera view window. a b h Touch . i Press the "Presser Foot lower the presser foot. Lifter" button to 292 c a Grid lines b Thread mark on - Brother International Quattro 2 6700D | Users Manual - English - Page 295
adjustment for the needle drop position moving the embroidery frame little by little. m If the pattern with the positioning keys. Note • When embroidering the repeated pattern, you cannot rotate the rotated in the camera view window, you cannot sew the pattern properly aligned even if the thread - Brother International Quattro 2 6700D | Users Manual - English - Page 296
EDITING PATTERNS After Editing a Press . * To combine the pattern with other patterns, select (see page 295). * See page 218 for more information about sewing patterns. Memo • If you want to return to the edit screen after pressing , press . 294 - Brother International Quattro 2 6700D | Users Manual - English - Page 297
COMBINING PATTERNS COMBINING PATTERNS Editing Combined Patterns Example: Combining alphabet characters with an embroidery pattern and editing b Use to view 2/7, then select . a Press pattern. to select an embroidery c Press . 6 Embroidery Edit 295 - Brother International Quattro 2 6700D | Users Manual - English - Page 298
COMBINING PATTERNS d Press . f Select and enter "Spring". * After selecting , press to change the character case, then enter the remaining characters. e Press to enter the alphabet characters. * Press to return to the previous screen. → The characters you enter will be displayed in the - Brother International Quattro 2 6700D | Users Manual - English - Page 299
j Press to characters. change the color of the * See page 277 for more information about changing the color. COMBINING PATTERNS ■ Selecting combined embroidery patterns If multiple patterns have been combined, use to select the pattern to be edited. If a USB mouse is connected, the pattern - Brother International Quattro 2 6700D | Users Manual - English - Page 300
order they were entered. In this example, the embroidery order will be as follows: → → After the flowers are embroidered, the [+] cursor will move to the "Spring" part of the pattern. b Embroider . Note • Follow the directions in "Sewing Embroidery Patterns" on page 219. 298 → When "Spring" is - Brother International Quattro 2 6700D | Users Manual - English - Page 301
multicolor steps to become shaded and the selected pattern will embroider in a single color, instead of changing the thread while embroidering. Press again to return to the pattern's original settings. Basting Embroidery Before embroidering, basting stitches can be sewn along the outline of the - Brother International Quattro 2 6700D | Users Manual - English - Page 302
the built-in patterns and patterns on embroidery cards. This is convenient for fabrics that cannot be embroidered or when you wish to attach an . → Basting is added to the beginning of the sewing order. f Press the "Start/Stop" embroidering. button to begin Note • Felt or denim fabrics - Brother International Quattro 2 6700D | Users Manual - English - Page 303
pattern as shown below. Memo • Three settings are available: 1 (narrow), 2 (normal) and 3 (wide). 6 Embroidery Edit a Embroidering area b Approx. 1 cm c Pattern size • The setting remains selected even if the machine is turned off. d Press screen. e Press to return to the previous . 301 - Brother International Quattro 2 6700D | Users Manual - English - Page 304
for creating the appliqué piece are added to the sewing order. Note • An appliqué piece cannot be created if the pattern is too large or too complicated or a combined pattern is separated. Even if the selected pattern fits within the embroidering area, the entire appliqué pattern may exceed the - Brother International Quattro 2 6700D | Users Manual - English - Page 305
VARIOUS EMBROIDERING FUNCTIONS h Hoop the appliqué fabric in the embroidery frame, attach the embroidery frame to the machine, and then start embroidering. i After the pattern is embroidered, thread the machine with the thread for the cutting line, and then sew the cutting line (APPLIQUE - Brother International Quattro 2 6700D | Users Manual - English - Page 306
EMBROIDERING FUNCTIONS n With the machine threaded using the thread for the outline from step l, sew onto the presser foot, needle, and needle plate at this time. Finish embroidering the appliqué pattern o After embroidering is finished, remove the stabilizer material from the embroidery frame. - Brother International Quattro 2 6700D | Users Manual - English - Page 307
fit the size of the VARIOUS EMBROIDERING FUNCTIONS g Use to select the frame pattern, and then press and . d Press and then press . → The frame pattern is deleted. e Press setting. to select the appliqué piece h Press . 6 Embroidery Edit f Press . i Continue with step g of - Brother International Quattro 2 6700D | Users Manual - English - Page 308
patterns combined with printed designs are built into this machine. Beautiful three-dimensional embroidered designs can be created by ironing a background onto fabric or printing it onto printable fabric, then sewing complementary embroidery on top of the background. For details on Print and - Brother International Quattro 2 6700D | Users Manual - English - Page 309
is not applied to the bobbin thread 312 CREATING BOBBIN WORK (SEWING 314 Positioning the Fabric and Sewing 314 ■ Finishing the thread ends 316 Bobbin Work Free Motion Sewing 317 CREATING BOBBIN WORK (EMBROIDERY 318 Selecting the Pattern 318 Start Embroidering 320 ADJUSTING THE THREAD TENSION - Brother International Quattro 2 6700D | Users Manual - English - Page 310
through the machine's needle. The decorative thread or ribbon will stitch out on the underneath side of fabric while sewing with the fabric wrong side facing up. 1. Utility stitches 2. Decorative stitches 3. Free motion sewing Bobbin work embroidery is sewn using the bobbin work patterns - Brother International Quattro 2 6700D | Users Manual - English - Page 311
Free motion echo quilting foot "E" No.5 or finer hand embroidery thread or decorative thread Flexible woven ribbon Embroidery: Embroidery foot "W" 7 (When embroidering: approx. 2mm (approx. 5/64 inch) recommended) How to Create Bobbin Work Fine embroidery ribbon (silk or silk - Brother International Quattro 2 6700D | Users Manual - English - Page 312
"Echo Quilting Using the Free Motion Echo Quilting Foot "E"" on page 119 → "Attaching Embroidery Foot "W"" on page 187 c Thread the machine with the upper thread. For details on threading the machine, refer to "Upper Threading" on page 57. a Bobbin case e Use the cleaning brush included with the - Brother International Quattro 2 6700D | Users Manual - English - Page 313
, the thread may become tangled or the machine may be damaged. h Wind a bobbin decorative thread around the by hand. After winding the bobbin so it is filled as shown below (about 80%), cut the thread. For precautions on winding the bobbin for embroidering, refer to step b of "Selecting the - Brother International Quattro 2 6700D | Users Manual - English - Page 314
spring CAUTION • When winding the bobbin, make sure the thread is not frayed. Sewing with frayed thread may result in the thread catching on the tension spring of the bobbin case, the thread completely becoming tangled or damage to the machine. • Do not guide the bobbin thread through the groove in - Brother International Quattro 2 6700D | Users Manual - English - Page 315
foot toward the rear of the machine. Note • When installing the flat bed attachment or embroidery unit, do not allow it to pinch the thread. • When the bobbin to "CREATING BOBBIN WORK (SEWING)" on page 314. If embroidery patterns are to be used, refer to "CREATING BOBBIN WORK (EMBROIDERY)" on page - Brother International Quattro 2 6700D | Users Manual - English - Page 316
cause the needle to break, immediately stop sewing if this occurs. Turn off the machine and cut out the tangled thread with scissors. Then, clean the race and bobbin case as described in "Preparing the Bobbin Thread" on page 310. a Turn on the machine. b Select a stitch in the Utility and Decorative - Brother International Quattro 2 6700D | Users Manual - English - Page 317
foot. place the CREATING BOBBIN WORK (SEWING) Note • If the bobbin thread does not come up, hold the upper thread as shown below to pull up the bobbin bobbin thread, and then pass them under the presser foot toward the rear of the machine. a Punched hole b Upper thread over the presser foot - Brother International Quattro 2 6700D | Users Manual - English - Page 318
the needle and presser foot. s Leaving about 10 cm (approx. 4 inches) of thread at the ends, use scissors to cut the threads. a Wrong side of fabric b Bobbin thread Note • If it is difficult to place bobbin thread through the eye of a hand sewing needle, use a ribbon embroidery needle to pull - Brother International Quattro 2 6700D | Users Manual - English - Page 319
of your fabric. * For bobbin work free motion sewing use the instructions for "CREATING BOBBIN WORK (SEWING)" on page 314. * For information about using the free motion quilting foot "C", free motion open toe quilting foot "O", or free motion echo quilting foot "E" refer to "Free Motion Quilting - Brother International Quattro 2 6700D | Users Manual - English - Page 320
thread required for each pattern, refer to the Quick Reference Guide included with the machine. Be sure to use a bobbin wound with enough thread. If the bobbin runs out of thread while sewing, the embroidery cannot be completed. • Depending on the thread thickness, it may not be possible to wind - Brother International Quattro 2 6700D | Users Manual - English - Page 321
CREATING BOBBIN WORK (EMBROIDERY) CAUTION • When sewing bobbin work, be sure to select an embroidery pattern for bobbin work. If any other type of pattern is selected, the machine may be damaged. Note • Embroidery sewing speed defaults to 350 spm when a bobbin work embroidery pattern is selected. - Brother International Quattro 2 6700D | Users Manual - English - Page 322
CREATING BOBBIN WORK (EMBROIDERY) Start Embroidering a Hoop the fabric so the right side of the fabric is facing down with the stabilizer lying on the top. Use an embroidery frame that fits the size of the pattern and then attach the frame to the machine. These patterns are embroidered from - Brother International Quattro 2 6700D | Users Manual - English - Page 323
to unlock all keys and i Lower the presser foot. j While holding both the upper thread and the bobbin thread, sew a section of the pattern. CREATING BOBBIN WORK (EMBROIDERY) n Using a hand sewing ribbon embroidering needle such needle, pull as a the bobbin thread to the top (wrong side) of - Brother International Quattro 2 6700D | Users Manual - English - Page 324
plate, as shown below. If this occurs, gently press down the spring plate with a screwdriver so it is lower than the top surface of the bobbin case (gray), and then insert the bobbin case into the machine. If the desired stitching cannot be achieved after adjusting the upper thread tension, adjust - Brother International Quattro 2 6700D | Users Manual - English - Page 325
TROUBLESHOOTING TROUBLESHOOTING Several solutions for minor problems are described below. If the problem persists, contact your nearest authorized Brother dealer. ■ The thread was accidentally cut automatically and the bobbin thread is caught inside the machine a Cut the thread near the fabric - Brother International Quattro 2 6700D | Users Manual - English - Page 326
TROUBLESHOOTING 324 - Brother International Quattro 2 6700D | Users Manual - English - Page 327
8 Chapter MY CUSTOM STITCH DESIGNING A STITCH 326 ENTERING STITCH DATA 328 ■ Key Functions ...328 ■ Moving a Point ...331 ■ Moving Part or All of the Design 331 ■ Inserting New Points ...332 USING STORED CUSTOM STITCHES 334 Storing Custom Stitches in Your List 334 ■ If the Memory is Full ...334 - Brother International Quattro 2 6700D | Users Manual - English - Page 328
DESIGNING A STITCH DESIGNING A STITCH By using the MY CUSTOM STITCH function, you can register stitches you have created yourself. You can also sew designs combining MY CUSTOM STITCH creations with built-in characters (see page 170). Memo • Stitches that you create with MY CUSTOM STITCH can be a - Brother International Quattro 2 6700D | Users Manual - English - Page 329
DESIGNING A STITCH Examples of Custom Stitches Stitch 1 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 12 18 22 23 21 17 14 12 9 6 3 1 3 6 0 0 3 6 10 13 14 13 11 13 14 13 10 6 3 Stitch 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 12 41 43 40 41 38 35 32 30 32 35 41 45 47 44 0 0 4 7 11 13 14 13 10 6 3 0 0 4 - Brother International Quattro 2 6700D | Users Manual - English - Page 330
this key to delete a selected point. 330 f Return key Press this key to exit the entering stitch data screen. - g Test key Press this key to sew a test of the stitch. 330, 334 h MY CUSTOM STITCH Press this key to store the stitch being created. 334 memory key i Block move key Press - Brother International Quattro 2 6700D | Users Manual - English - Page 331
a Press and then . b Press . ENTERING STITCH DATA * Press created. to enlarge the image of the stitch being a b c Use to move to the coordinates of the first point on the grid sheet. * Press sheet. to change the direction of the grid a Currently selected point/Total number of points b - Brother International Quattro 2 6700D | Users Manual - English - Page 332
point that grid sheet until the stitch design is drawn on the screen as a continuous line. * Press * Press * Press to delete a selected point entered. to sew a test-run of the stitch. to return to the original screen. Memo • If you have entered points that are too close together, the fabric may - Brother International Quattro 2 6700D | Users Manual - English - Page 333
■ Moving a Point a Press or to move that you want to move. to the point * To move to the first point, press . * To move to the last point, press . * You can also move by using the touch pen. ENTERING STITCH DATA ■ Moving Part or All of the Design a Press or to move to the first point - Brother International Quattro 2 6700D | Users Manual - English - Page 334
ENTERING STITCH DATA c Press or to move the section. ■ Inserting New Points a Press or to move to a place on the design where you want to add a new point. * To move to the first point, press . * To move to the last point, press . * You can also move by using the touch pen. d Press . - Brother International Quattro 2 6700D | Users Manual - English - Page 335
→ A new point is entered and moves to it. c Use to move the point. ENTERING STITCH DATA MY CUSTOM STITCH 8 333 - Brother International Quattro 2 6700D | Users Manual - English - Page 336
be stored. Before storing a stitch, press run of the stitch. to sew a test- ■ If the Memory is Full If the following message appears a stored stitch pat- tern, see page 335. Note • Do not turn off the machine while the "Sav- ing" message is displayed, otherwise the stitch pattern data being saved - Brother International Quattro 2 6700D | Users Manual - English - Page 337
Retrieving Stored Stitches a Press . USING STORED CUSTOM STITCHES c Press . * To delete the stored stitch pattern, press . * To edit the stored stitch pattern, press . → A list of stored stitch patterns is displayed. b Select the stitch pattern. * Press to return to the previous screen - Brother International Quattro 2 6700D | Users Manual - English - Page 338
USING STORED CUSTOM STITCHES 336 - Brother International Quattro 2 6700D | Users Manual - English - Page 339
Bobbin Case Area 340 About the Maintenance Message 341 ADJUSTING THE SCREEN 342 Adjusting the Brightness of the Screen Display 342 Touch Panel is Malfunctioning 342 TROUBLESHOOTING 343 ERROR MESSAGES 348 ■ Alarm Sounds ...355 SPECIFICATIONS 356 UPGRADING YOUR MACHINE'S SOFTWARE 357 Upgrade - Brother International Quattro 2 6700D | Users Manual - English - Page 340
If dust or bits of dirt collect in the race or bobbin case, the machine will not run well, and the bobbin thread detection function may not operate. Keep the machine clean for best results. Press → → → → in this order to display a video example of cleaning the race (see page 46). Follow the - Brother International Quattro 2 6700D | Users Manual - English - Page 341
67). foot d Remove the flat bed attachment or the embroidery unit if bobbin case. • If lint or dust collects on the bobbin thread sensor, the sensor may not operate correctly. h Insert the bobbin case so that the S mark on the bobbin case aligns with the z mark on the machine. a a Bobbin - Brother International Quattro 2 6700D | Users Manual - English - Page 342
bobbin case. CAUTION • Never use a bobbin case that is scratched; otherwise, the upper thread may become tangled, the needle may break, or sewing performance may suffer. For a new bobbin remove the needle plate cover. b Use the screwdriver machine to unscrew included with the and remove the - Brother International Quattro 2 6700D | Users Manual - English - Page 343
d Use the screwdriver included with the machine to screw and attach the needle plate. CARE AND MAINTENANCE to take your machine to an authorized dealer or nearest authorized service center for a regular maintenance check. Although this message will disappear and the machine will continue to - Brother International Quattro 2 6700D | Users Manual - English - Page 344
you can adjust the brightness of the screen display. a Press . → The Sewing settings screen appears. b Press . → The General settings screen appears. c Display does not respond correctly when you touch a key (the machine does not perform the operation or performs a different operation), follow - Brother International Quattro 2 6700D | Users Manual - English - Page 345
during sewing. Press at any time to return to the original screen. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at " http://solutions.brother.com ". If the problem persists, contact your dealer or the nearest authorized service - Brother International Quattro 2 6700D | Users Manual - English - Page 346
TROUBLESHOOTING Problem Cause Solution Page Bobbin thread breaks Bobbin is set incorrectly. Reset the bobbin thread correctly. 54 There are scratches on the bobbin or it doesn't Replace the bobbin. 54 rotate properly. Thread is twisted. Use scissors, etc. to cut the twisted thread - - Brother International Quattro 2 6700D | Users Manual - English - Page 347
TROUBLESHOOTING Problem Fabric does not feed through the machine Fabric puckers High-pitched sound while sewing Character pattern does not turn out Cause Solution Page Feed dogs are set in the down position. 116 Press , and then turn the handwheel to - Brother International Quattro 2 6700D | Users Manual - English - Page 348
TROUBLESHOOTING Problem Embroidery pattern does not sew out correctly Loops appear on the surface of the fabric when embroidering Machine does not operate Embroidery unit does not operate Nothing happens, even if the LCD display is pressed Cause Solution Thread is twisted. Use scissors, etc., - Brother International Quattro 2 6700D | Users Manual - English - Page 349
these times, the machine will make a sound different from what is made during normal sewing. This is not the sign of a malfunction. • If the power is disconnected during sewing: Turn the main power to OFF and unplug the machine. If you restart the machine, follow the instructions for operating the - Brother International Quattro 2 6700D | Users Manual - English - Page 350
displayed when you try to sew with a stitch other than a middle needle position stitch while the single-hole needle plate is installed. This message is displayed when the needle plate is removed with the machine on or when the machine is turned on and embroidery or embroidery edit mode is selected - Brother International Quattro 2 6700D | Users Manual - English - Page 351
step m in "Edge Sewing" on page 154. If this message appeared during edge sewing, the edge of the fabric cannot be detected by the built-in camera. Press , raise the presser foot, raise the needle if . This message is displayed when an unusable embroidery card is inserted. 9 Appendix 349 - Brother International Quattro 2 6700D | Users Manual - English - Page 352
when the "Reverse/ Reinforcement Stitch" button is pushed while the embroidery unit is attached. This message is displayed when the foot controller is pressed while the embroidery unit is attached and machine is set up for embroidering. This message is displayed when the patterns you are editing - Brother International Quattro 2 6700D | Users Manual - English - Page 353
needle position and sew the remainder of the pattern. ERROR MESSAGES This message is displayed when the "Start/Stop" button is pushed and the machine is in embroidery mode, but the embroidery unit is not attached. This message is displayed when replacing the embroidering bobbin thread. This message - Brother International Quattro 2 6700D | Users Manual - English - Page 354
/Stop" button is pushed to sew Utility stitches or Character/ Decorative stitches while the foot controller is connected. (This message does not appear when embroidering). This message is displayed when the "Start/ Stop" button is pushed while the machine is in embroidery edit mode and a pattern is - Brother International Quattro 2 6700D | Users Manual - English - Page 355
when the machine is retrieving a previously saved pattern while in embroidery edit mode. This message is displayed when, after selecting a pattern, , , or is pressed and the pattern is about to be deleted. This message is displayed when the bobbin is being wound, and the motor locks because - Brother International Quattro 2 6700D | Users Manual - English - Page 356
media. For a list of compatible USB media, visit " http:// solutions.brother.com ". This message is displayed when it seems that the upper thread is pressed (the presser foot is raised). This message is displayed when the file size exceeds the data capacity of the machine. Confirm the file size - Brother International Quattro 2 6700D | Users Manual - English - Page 357
Sounds If the operation was performed incorrectly, an alarm sounds to indicate that an error occurred. If the operation was performed correctly, the machine beeps to confirm the operation. Memo • To cancel the operation beep or to change the volume, press , display screen 3/8, and then change - Brother International Quattro 2 6700D | Users Manual - English - Page 358
Sewing Machine (Box 1 of 3) Item Dimensions of machine Dimensions of box Accessory Box (Box 2 of 3) Embroidery Unit (Box 3 of 3) Weight of machine Weight of box (for shipping) Sewing speed Needles Dimensions of box Weight of box (for shipping) Dimensions of embroidery unit Dimensions of machine - Brother International Quattro 2 6700D | Users Manual - English - Page 359
UPGRADING YOUR MACHINE'S SOFTWARE UPGRADING YOUR MACHINE'S SOFTWARE You can use USB media or a computer to upgrade software for your sewing machine. When an upgrade program is available on " http://solutions.brother.com ", please download the files following the instructions on the website and steps - Brother International Quattro 2 6700D | Users Manual - English - Page 360
the USB cable connector into the corresponding USB ports for the computer and for the machine. → "Removable Disk" will appear in "Computer (My computer)". d Copy the upgrade file to "Removable Disk". → The upgrade file is loaded. Note • If an error occurs, a red text error message will appear - Brother International Quattro 2 6700D | Users Manual - English - Page 361
Note • Quilting foot "C" is used when the straight stitch needle plate is attached to the machine. Refer to "Using Free motion Quilting Foot "C"" on page Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle General sewing, gather - Brother International Quattro 2 6700D | Users Manual - English - Page 362
STITCH SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle 2 steps elastic zigzag 3 steps elastic zigzag Overcasting stitch Overcasting (medium weight and stretch fabrics), tape and elastic - Brother International Quattro 2 6700D | Users Manual - English - Page 363
foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin NO Quilting appliqué zigzag stitch Quilting appliqué stitch Zigzag stitch for quilting and sewing on appliqué quilt pieces Quilting stitch for invisible appliqué or attaching binding 3.5 - Brother International Quattro 2 6700D | Users Manual - English - Page 364
Hemstitching Hemstitching Hemstitching Hemstitching Hemstitching Hemstitching Hemstitching Hemstitching Presser foot Applications Stitch width [mm (inch)] Auto. Manual Decorative stitching 4.0 (3/16) 0.0 - 7.0 (0 - 1/4) Decorative top stitching 4.0 (3/16) 0.0 - 7.0 (0 - 1/4) Decorative - Brother International Quattro 2 6700D | Users Manual - English - Page 365
STITCH SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Honeycomb stitch Heirloom, decorative hems 5.0 (3/64) 1.5 - 7.0 (1/16 - 1/4) Honeycomb stitch Heirloom, decorative hems 6.0 1.5 - 7.0 (15/64) (1/16 - 1/4) Hemstitching Heirloom, - Brother International Quattro 2 6700D | Users Manual - English - Page 366
STITCH SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle Round ended buttonhole Buttonholes with bar tack 5.0 (3/16) 3.0 - 5.0 (1/8 - 3/16) 0.4 (1/64) 0.2 - 1.0 (1/64 - 1/16) NO Round - Brother International Quattro 2 6700D | Users Manual - English - Page 367
Stitch name Presser foot Applications Button sewing Attaching buttons Eyelet Star eyelet For making eyelets, holes on belts, etc. For making star-shaped eyelets on holes. Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle 3.5 (1/8) 2.5 - 4.5 (3/32 - Brother International Quattro 2 6700D | Users Manual - English - Page 368
Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle Hand 4.0 (1/64 - 3/16) NO Zigzag stitch (Left) Start from left needle position, zigzag sew at right 3.50 (1/8) 2.50 - 5.00 (3/32 - 3/16) 1.6 0.3 - 4.0 (1/ - Brother International Quattro 2 6700D | Users Manual - English - Page 369
STITCH SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Patchwork double overlock stitch Smocking stitch Patchwork stitches, decorative stitching 5.00 (3/16) Smocking, decorative stitching 5.00 (3/16) 2.50 - 7.00 (3/32 - 1/4) 0.00 - 7.00 (0 - Brother International Quattro 2 6700D | Users Manual - English - Page 370
368 saving 177 178, 179 selecting 156 sewing 161 stitch selection screens 157 Cleaning LCD screen 338 machine casing 338 race 338 Color shuffling function 283 Combining Patterns character/decorative stitches 170 embroidery edit 295 Cord guide bobbin cover 103 Crazy quilt 103 , Custom - Brother International Quattro 2 6700D | Users Manual - English - Page 371
stitches 164 embroidery 199 embroidery edit 269 MY CUSTOM STITCH 328 utility stitches 30 , Knee lifter 13 83 L , LCD screen 13 28 cleaning 338 light 36 locking 86 Lower threading pulling up the bobbin thread 55 setting the bobbin 54 winding the bobbin 48 M Machine operation mode - Brother International Quattro 2 6700D | Users Manual - English - Page 372
Set key 329 Settings automatic reinforcement stitching 81 , automatic thread cutting 82 235 display language 41 embroidery settings 37 general settings 36 machine setting mode key 35, 237, 278 sewing settings 35 stitch length 79 stitch width 78 , thread tension 79 233 thread trimming 236 - Brother International Quattro 2 6700D | Users Manual - English - Page 373
- Brother International Quattro 2 6700D | Users Manual - English - Page 374
- Brother International Quattro 2 6700D | Users Manual - English - Page 375
- Brother International Quattro 2 6700D | Users Manual - English - Page 376
English 882-W04/W05 XF0228-001 Printed in Taiwan
Please visit us at
where you can get
product support and answers to frequently asked questions (FAQs).
Operation Manual
Embroidery and Sewing Machine
Product Code: 882-W04/W05