Brother International S-7200B Basic Instruction Manual - English
Brother International S-7200B Manual
View all Brother International S-7200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International S-7200B manual content summary:
- Brother International S-7200B | Basic Instruction Manual - English - Page 1
S-7200B Basic Operation Manual SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. This basic operation manual describes basic operations including sewing machine - Brother International S-7200B | Basic Instruction Manual - English - Page 2
Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions and the explanations given in the instruction manual. With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as - Brother International S-7200B | Basic Instruction Manual - English - Page 3
indications and their meanings This instruction manual and the indications and symbols that are used on the machine itself are provided in order to ensure safe operation of this machine and to prevent accidents and example, the symbol at left means "you must make the ground connection".) S-7200B i - Brother International S-7200B | Basic Instruction Manual - English - Page 4
problems with correct operation. Installation Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine the oil out of the reach of children. ii S-7200B - Brother International S-7200B | Basic Instruction Manual - English - Page 5
reach of children. Use only the proper replacement parts as specified by Brother. Maintenance and inspection Maintenance and inspection of the sewing machine should only be carried out by a qualified technician. Ask your Brother dealer or a qualified electrician to carry out any maintenance and - Brother International S-7200B | Basic Instruction Manual - English - Page 6
labels The following warning labels appear on the sewing machine. Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are difficult to read, please contact your nearest Brother dealer. 1 2 3 Be sure to connect the ground. If - Brother International S-7200B | Basic Instruction Manual - English - Page 7
case 14 4-5. Threading the upper thread 15 4-6. Adjusting the stitch length 15 5. USING THE OPERATION PANEL (BASIC OPERATIONS 16 5-1. Names and functions 16 5-2. Sewing start and end backtack stitches............18 6. SEWING 19 6-1. Sewing 19 6-2. Backtacking 19 Document CD 21 S-7200B - Brother International S-7200B | Basic Instruction Manual - English - Page 8
INSTRUCTION MANUAL CD 9-3. Sewing condensed stitches This feature is ideal for use when sewing thin materials that can easily pucker when reverse stitches are sewn. Condensed stitches have a smaller sewing pitch and they help prevent fraying. Sewing direction with ease. 3720M 1 S-7200B 3721M - Brother International S-7200B | Basic Instruction Manual - English - Page 9
lever (5) Presser foot (7) Control box panel (9) Power switch (11) Reverse lever (13) Machine pulley (15) Cotton stand Safety devices (16) Thread take-up cover (2) Thread wiper (-4[][] Stitch length dial (14) Operation panel (Models with operation panel) 3630M (17) Finger guard S-7200B 2 - Brother International S-7200B | Basic Instruction Manual - English - Page 10
your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine weighs sewing machine. The sewing machine should be plugged directly into an AC wall outlet. Operation problems may result if extension cords are used. Carrying the machine The machine - Brother International S-7200B | Basic Instruction Manual - English - Page 11
and should be strong enough to hold the weight and with-stand the vibration of the sewing machine. Drill holes as indicated in the illustration below. Cotton stand hole Cord hole Head pcs] (4) Spring washers [3 pcs] (5) Washers [3 pcs] 2. Connecting rod (6) Connecting rod (7) Nut 2091M S-7200B 4 - Brother International S-7200B | Basic Instruction Manual - English - Page 12
(left) [2 pcs] (2) Head cushions (right) [2 pcs] (3) Oil pan 3632M 5. Rubber cushions (1) Rubber cushions [2 pcs] (2) Nails [4 pcs] 6. Knee lifter complying bar (3) Knee lifter complying bar 2094M 5 S-7200B - Brother International S-7200B | Basic Instruction Manual - English - Page 13
into the table hole. If the head rest (3) is not pushed in as far as it will go, the machine head will not be sufficiently stable when it is tilted back. 3633M 8. Operation panel (Models with operation panel) (1) securely clamped and so that the cotton stand (1) does not move. 3636M S-7200B 6 - Brother International S-7200B | Basic Instruction Manual - English - Page 14
knee lifter plate (1) to a position where it is easy to use. 3637M 1. Turn the machine pulley so that the feed dog is below the top of the needle plate. 2. Lower the presser foot (5) by adjustment is completed, securely tighten the nut (9). Within 16 mm 3639M 7 S-7200B - Brother International S-7200B | Basic Instruction Manual - English - Page 15
machine should always be lubricated and the oil supply replenished before it is used for the first time, and also after long periods of non-use. Use only the lubricating oil (Nisseki Mitsubishi Sewing Lube 10N; VG10) specified by Brother. * If this type of lubricating oil is difficult to obtain - Brother International S-7200B | Basic Instruction Manual - English - Page 16
can result in severe injury. CAUTION Contact your Brother dealer or a qualified electrician for any electrical work problems with correct operation may also occur. 3-4-1. Opening the control box cover (1) Screw (2) Cover 3-4-2. Connecting the cords 3642M 1. Sewing machine cords 3643M 9 S-7200B - Brother International S-7200B | Basic Instruction Manual - English - Page 17
. All cords that come out from the control box should be secured to the cord holder (3) using the repeat cable tie (1), otherwise vibration from the sewing machine may cause the cords to become disconnected, which can cause problems with the operation of the control box. Cords 3645M S-7200B 10 - Brother International S-7200B | Basic Instruction Manual - English - Page 18
wire is the ground wire.) 2. Insert the plug into a properly-grounded AC power supply. NOTE: Do not use extension cords, otherwise machine operation problems may result. Green and yellow wire (ground wire) Ground symbol 2112M 4. Ground wire (1) Ground wire (2) Screw [With washer] (3) Screw Oil - Brother International S-7200B | Basic Instruction Manual - English - Page 19
touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. 2114M 1. Turning on the power out and the needle then rises above the needle plate and stops. 2117M S-7200B 12 - Brother International S-7200B | Basic Instruction Manual - English - Page 20
4. PREPARATION BEFORE SEWING 4. PREPARATION BEFORE SEWING 4-1. Installing the needle CAUTION Turn off the power switch before installing the needle. The machine may operate if the treadle is depressed by mistake, which could result in injury. Front 1. Turn the machine pulley to move the needle bar - Brother International S-7200B | Basic Instruction Manual - English - Page 21
machine. 3650M 1. Turn on the power switch. 2. Place the bobbin (1) onto the bobbin winder shaft (2). 3. Wind the thread several times around the bobbin (1) in the direction tension spring (2), and then pull it out from the thread guide (3). 4. Check that the bobbin turns clockwise when the thread - Brother International S-7200B | Basic Instruction Manual - English - Page 22
machine pulley and raise the thread take-up (1) before threading the upper thread. This will make threading easier and it will prevent the thread from coming out at the sewing be. (The numbers on the dial are for use as a guide. The length of the finished stitches may vary depending on the S-7200B - Brother International S-7200B | Basic Instruction Manual - English - Page 23
keys cannot be operated while sewing is in progress. Select the keys and set the number of stitches before starting sewing. • In the case of C and D stitch number displays is sewn continuously. After the sewing machine sews a full cycle of stitches set by A, B, C and D, the thread is - Brother International S-7200B | Basic Instruction Manual - English - Page 24
carried out after the set number of stitches have been sewn. 2152M (14) Half stitch key When the sewing machine is stopped, the needle bar can be moved up and down by pressing this key. 2153M (15) Lower thread counter to its initial value and to cancel warning conditions. 2156M 17 S-7200B - Brother International S-7200B | Basic Instruction Manual - English - Page 25
before sewing of the set number of start backtack stitches is complete, end backtacking will not be carried out. • If the indicator of the thread trimming lock key is illuminated, the sewing machine will stop in the needle up position without thread trimming being carried out. 2160M S-7200B 18 - Brother International S-7200B | Basic Instruction Manual - English - Page 26
sewing machine. If the machine is used without these devices attached, injury may result. Turn off the power switch at the following times. The machine to start sewing. 6-2. Backtacking 3668M 3669M When the actuator (1) or the reverse lever (2) is pressed during sewing, the feed direction will be - Brother International S-7200B | Basic Instruction Manual - English - Page 27
MEMO S-7200B 20 - Brother International S-7200B | Basic Instruction Manual - English - Page 28
are contained in PDF format. ・ Basic Operation Manual ・ Instruction Manual ・ Parts Book How to use the Document Windows® 2000 Service Pack 4, Windows® XP Service Pack 2 Microsoft® Internet Explorer 6 Service Pack 1 or brother.com/ © 2006 Brother Industries, Ltd. All Rights Reserved. S-7200B SA7307-001 E
S-7200B
SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER
WITH THREAD TRIMMER
Please read this manual before using the machine.
Please keep this manual within easy reach for quick reference.
This
basic
operation
manual
describes
basic
operations including sewing machine operations.
For cleaning, standard adjustments and more details,
please refer to the instruction manual contained in
the Document CD.
Basic Operation Manual