Brother International SB8000 Users Manual - English
Brother International SB8000 Manual
View all Brother International SB8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International SB8000 manual content summary:
- Brother International SB8000 | Users Manual - English - Page 1
Bobbin work kit Operation Manual - Brother International SB8000 | Users Manual - English - Page 2
manual are for illustration purposes and may differ from the actual items. This is a kit used for sewing (utility stitches, decorative stitches or free-motion sewing). This kit cannot be used for machine embroidering. CONTENTS ABOUT BOBBIN WORK ...2 INCLUDED ACCESSORIES ...2 PREPARING FOR BOBBIN - Brother International SB8000 | Users Manual - English - Page 3
built-in decorative stitches) Free-motion sewing INCLUDED ACCESSORIES 1. 2. 3. 4. Bobbin case (gray) (XE8298-001) Bobbin cover with tabs (*See Note.) Screwdriver (small) (X55468-051) CD-ROM (Contains the Operation Manual and the Templates for freemotion sewing.) (USA/CANADA: XE9382-001, Other - Brother International SB8000 | Users Manual - English - Page 4
PREPARING FOR BOBBIN WORK Required Materials - Brother International SB8000 | Users Manual - English - Page 5
- Brother International SB8000 | Users Manual - English - Page 6
CAUTION • Be sure to use the bobbin case (gray) when creating bobbin work. Using any other bobbin case may result in the thread becoming tangled or damage to the machine. • Make sure that the bobbin case is correctly installed. If the bobbin case is incorrectly installed, the thread may become - Brother International SB8000 | Users Manual - English - Page 7
- Brother International SB8000 | Users Manual - English - Page 8
to the machine's Operation Manual. a Needle plate cover b Bobbin cover with tabs Note • Two bobbin covers may be included, depending on the country or region where this kit was purchased. Use the bobbin cover with the same shape as the bobbin cover included with your machine. The bobbin cover with - Brother International SB8000 | Users Manual - English - Page 9
the mark on the handwheel aligns with the center top of machine. c d Use the presser foot lever to raise the presser foot. With the wrong side facing up, place the fabric with stabilizer under the presser foot. → A loop of the bobbin thread comes up through the hole in the fabric. g Raise the - Brother International SB8000 | Users Manual - English - Page 10
, and then lower the presser foot lever. i j Turn on the machine. Select a stitch. Memo • machine's Operation Manual. Memo We recommend an upper thread tension that is higher than the standard setting. l Note • Before sewing, check that there is enough thread in the bobbin. o If your machine - Brother International SB8000 | Users Manual - English - Page 11
pull the end of the bobbin thread up to the wrong side of the fabric. a 10 cm (approx. 4 inches) Note • Do not sew reinforcement/reverse stitches or use machine damage. a Wrong side of fabric b Bobbin thread Note • If it is difficult to pull up the bobbin thread, use a ribbon embroidery needle - Brother International SB8000 | Users Manual - English - Page 12
sewing use the instructions for "CREATING BOBBIN WORK" beginning on page 8. • Use the quilting foot provided with your machine. If you do not have a quilting foot, contact your nearest authorized dealer to purchase. For details on using the quilting foot, refer to the Operation Manual provided - Brother International SB8000 | Users Manual - English - Page 13
Templates for Free-Motion Sewing Note • Bobbin work is sewn with the wrong side of the fabric facing up. For this 20 No.20.pdf a b a b a b a b * These templates have the arrows to show you the sewing direction. Trace the arrows with design when transferring the design to the stabilizer. 12 - Brother International SB8000 | Users Manual - English - Page 14
than the standard setting. Refer to the machine's Operation Manual for detailed instruction. Note • Turning the screw on the bobbin case (gray) may push up the spring plate, as shown below. If this occurs, gently press down the spring plate with a screwdriver so it is lower than the top surface - Brother International SB8000 | Users Manual - English - Page 15
TROUBLESHOOTING Several solutions for minor problems are described below. If the problem persists, contact your nearest authorized dealer. - Brother International SB8000 | Users Manual - English - Page 16
English 111-001
Bobbin work kit
Operation Manual