Brother International SQ9050 Users Manual - English

Brother International SQ9050 Manual

Get Brother International SQ9050 PDF manuals and user guides View all Brother International SQ9050 manuals
Add to My Manuals
Save this manual to your list of manuals

Brother International SQ9050 manual content summary:

  • Brother International SQ9050 | Users Manual - English - Page 1
    KNOWING YOUR SEWING MACHINE SEWING BASICS VARIOUS STITCHES APPENDIX Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs).
  • Brother International SQ9050 | Users Manual - English - Page 2
    service center for examination, repair, electrical or mechanical adjustment. While the machine is stored or in use if you notice anything unusual, such as an odor, heat, discoloration or deformation, stop using the machine immediately and unplug the power cord. When transporting the sewing machine
  • Brother International SQ9050 | Users Manual - English - Page 3
    soaps or detergents to clean the case. Benzene, thinner, and scouring powders can damage the case and machine, and should never be used. • Always consult the operation manual when replacing or installing any assemblies, the presser feet, needle, or other parts to assure correct installation. 1
  • Brother International SQ9050 | Users Manual - English - Page 4
    first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother dealer. Use this machine only for its intended use as described in this manual. Use accessories recommended by
  • Brother International SQ9050 | Users Manual - English - Page 5
    YOUR SEWING MACHINE 9 Power supply precautions ...9 Turning on the machine ...9 Foot controller ...10 Sewing speed controller (for models equipped with the sewing speed controller 10 Changing the needle stop position ...10 Changing the initial needle position ...11 Cancelling the operation beep
  • Brother International SQ9050 | Users Manual - English - Page 6
    characters ...66 Sewing the character stitches ...67 ADJUSTING STITCHES (for models equipped with character stitches 68 4. APPENDIX ...70 MAINTENANCE ...70 Cleaning the machine surface ...70 Cleaning the bobbin case ...70 TROUBLESHOOTING ...72 ERROR MESSAGES ...75 Operation beep (for models
  • Brother International SQ9050 | Users Manual - English - Page 7
    differ depending on the sewing machine model. j Operation panel (page 7) This is used to select the stitch and specify the various settings. k Handwheel Used to manually raise and lower the needle. l Main power and sewing light switch (page 9) You can turn the main power and sewing light switch on
  • Brother International SQ9050 | Users Manual - English - Page 8
    bar thread guide. k Needle clamp screw Use the needle clamp screw to hold the needle in place. Operation buttons The operation buttons help you to easily perform various basic sewing machine operations. The operation buttons differ depending on the sewing machine model. a Presser foot lever Raise
  • Brother International SQ9050 | Users Manual - English - Page 9
    The operation panel, located on the front of the sewing machine, allows you to select a stitch and specify how the stitch will be sewn. 1 3 ABC a LCD (liquid crystal display) The number of the selected stitch (1), the presser foot to be used (2), the stitch length (mm) (3), and the stitch width
  • Brother International SQ9050 | Users Manual - English - Page 10
    . 75/11 1 needle 90/14 1 needle 100/16 1 needle 90/14 1 needle No. Part Name 1 Buttonhole foot "A" 2 Overcasting foot "G" 3 Monogramming foot "N" Part Code U.S.A. / Canada Others XC2691-033 XC3098-031 XD0810-031 4 Zipper foot "I" X59370-021 5 Zigzag foot "J" (on machine) 6 Blind stitch foot
  • Brother International SQ9050 | Users Manual - English - Page 11
    dealer for repairs before continuing use. ● Unplug the power cord if the machine is not to be used for a long period of time. Otherwise a fire may result. Turning on the machine Insert the plug into a wall outlet. a To turn off the machine, set the main power c switch to "{". X The sewing lamp
  • Brother International SQ9050 | Users Manual - English - Page 12
    the sewing machine. After turning on the sewing machine, release the "-" side of (stitch selection key). Note ● When the foot controller is plugged in, the start/stop button cannot be used to start sewing (only for models equipped with the start/stop button). X The needle stop position changes to
  • Brother International SQ9050 | Users Manual - English - Page 13
    selected when the sewing machine is operation beep) When the sewing machine is purchased, it is set to 1 turned on. The machine can be set so that the beep each time a key is pressed. This setting can be straight stitch (center needle position) is changed so that the machine does not beep
  • Brother International SQ9050 | Users Manual - English - Page 14
    possible. a Pre-tension disk b Bobbin winder shaft c Bobbin CAUTION ● Only use bobbins (part code: SA156, SFB) that have been designed for this sewing machine. Using other bobbins may cause damage to the machine. ● We designed the bobbin that comes with this machine. If you use bobbins from other
  • Brother International SQ9050 | Users Manual - English - Page 15
    start/stop button) to wind the thread around the bobbin a few times. Then stop the machine. 1 Note ● If the sewing machine is to be operated using the foot controller, connect the foot controller before turning on the machine. ● When the foot controller is plugged in, the start/stop button cannot
  • Brother International SQ9050 | Users Manual - English - Page 16
    or the needle may bend or break when the bobbin thread starts to run out. a Sewing speed controller Turn on the sewing machine. g Press the foot controller or press (start/ h stop button) (for models equipped with the start/stop button) to start. Note ● If the sewing machine is to be operated using
  • Brother International SQ9050 | Users Manual - English - Page 17
    of the bobbin case, it may cause incorrect thread tension (page 31). CAUTION ● Make sure you turn the power off while threading the machine. If you accidentally step on the foot controller and the machine starts to sew, you could be injured. Raise the needle to its highest position by turning
  • Brother International SQ9050 | Users Manual - English - Page 18
    KNOWING YOUR SEWING MACHINE Replace the bobbin cover. Put the left tab in e place (see arrow a), and then press lightly on the right side (see arrow b) until the cover clicks into place. • If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may
  • Brother International SQ9050 | Users Manual - English - Page 19
    on the wheel points up, or press (needle position button) (for models equipped with the needle position button) once or twice to raise the needle. a Presser foot lever or a Mark b Needle position button • If the needle is not correctly raised, the sewing machine can not be threaded. Be sure to
  • Brother International SQ9050 | Users Manual - English - Page 20
    feed the upper thread. ● If you incorrectly feed the thread you may cause sewing problems. ■ Using the needle threader (for models equipped with the needle threader) CAUTION ● The needle threader can only be used with home sewing machine needles size 75/11100/16. Check the table on page 21 for the
  • Brother International SQ9050 | Users Manual - English - Page 21
    threader lever. d Pull out about 5 cm (2 inch) of thread through g the needle toward the back of the sewing machine. 1 X The end of the needle threader rotates toward you and the hook passes through the eye of the needle. Catch the thread on the hook as shown below. e a Hook b Thread While lightly
  • Brother International SQ9050 | Users Manual - English - Page 22
    . or a Mark b Needle position button Pull on the upper thread to draw up the lower c thread. a Upper thread b Lower thread a Upper thread b Lower thread ■ For models equipped with the quick-set bobbin You can begin sewing immediately without drawing up the bobbin thread. When sewing gathers or
  • Brother International SQ9050 | Users Manual - English - Page 23
    follow the instructions below. CAUTION ● Only use home sewing machine needles. Use of any other needle may bend the needle or damage the machine. ● Never use bent needles. Bent needles can easily break, possibly resulting in injury. Needle types and their uses The sewing machine needle that
  • Brother International SQ9050 | Users Manual - English - Page 24
    b Needle position button Turn off the sewing machine. b a Flat side b Needle type marking ■ Correct needle 1 a Flat surface ■ Incorrect needle If the distance between the needle and the flat surface is not even, the needle is bent. Do not use a bent needle. CAUTION ● Before replacing the needle
  • Brother International SQ9050 | Users Manual - English - Page 25
    • Do not apply strong force when loosening or tightening the needle clamp screw, otherwise certain parts of the sewing machine may be damaged. CAUTION ● Be sure to insert the needle until it touches the needle stopper and securely tighten the needle clamp screw with the screwdriver, otherwise the
  • Brother International SQ9050 | Users Manual - English - Page 26
    that can be sewn with the twin needle, refer to "STITCH SETTINGS" (page 35). CAUTION ● Use only twin needles that have been made for this machine (part code: 131096-121). Other needles could break, and damage the machine. ● Do not sew with bent needles. The needle could break and injure you. ● You
  • Brother International SQ9050 | Users Manual - English - Page 27
    REPLACING THE PRESSER FOOT CAUTION 1 ● Always turn off the power before you change the presser foot. If you leave the power on and step on the controller, the machine will start and you may be injured. ● Always use the correct presser foot for the stitch pattern you have chosen. If you use the
  • Brother International SQ9050 | Users Manual - English - Page 28
    the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the screwdriver to remove the presser foot holder. ■ Removing the presser foot holder Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page
  • Brother International SQ9050 | Users Manual - English - Page 29
    2 SEWING BASICS SEWING Basic sewing operations are described below. Before operating the sewing machine, read the following precautions. 2 CAUTION ● While the machine is in operation, pay special attention to the needle location. In addition, keep your hands away from all moving parts such as
  • Brother International SQ9050 | Users Manual - English - Page 30
    stitch. When the sewing machine is turned on, the straight stitch ( left needle position) is selected. ■ [Example] Selecting stitch (No. 04) Turn on the sewing machine. a Attach the presser foot indicated on the LCD. d a The presser foot to use • For details, refer to "Replacing the presser foot
  • Brother International SQ9050 | Users Manual - English - Page 31
    or twice.) 2 or a Mark b Needle position button Raise the presser foot lever. b a Presser foot lever Place the fabric under the presser foot, pass c the thread under the presser foot, and then pull out about 5 cm (2 inch) of thread toward the rear of the machine. a 5 cm (2 inch) While holding
  • Brother International SQ9050 | Users Manual - English - Page 32
    so that the needle will stay up when sewing is stopped. For details on setting the machine so that the needles stay up when sewing is stopped, refer to "Changing the needle stop position" (page 10). ■ Sewing reinforcement stitches When sewing stitches other than straight or zigzag stitches that are
  • Brother International SQ9050 | Users Manual - English - Page 33
    on your fabric. 1 Memo ● When you finish sewing, remove the bobbin cover and then make sure that the thread is shown as below. If the thread is not shown as below, the thread is not inserted through the tension-adjusting spring of the bobbin case correctly. Reinsert the thread correctly. For
  • Brother International SQ9050 | Users Manual - English - Page 34
    Sewing curves Stop sewing, and then slightly change the sewing direction to sew around the curve. When sewing along a curve while using a zigzag stitch, select a shorter stitch length in order to obtain a finer stitch. When the stitching reaches a corner, stop the a sewing machine. Leave the needle
  • Brother International SQ9050 | Users Manual - English - Page 35
    does not pass through the hook-andloop fastener, replace the needle with the needle for thick fabrics (page 21). a Edge of the hook-and-loop fastener • Once the trouble spot has been passed, the foot will return to its normal position. CAUTION ● If fabric more than 6 mm (15/64 inch) thick is
  • Brother International SQ9050 | Users Manual - English - Page 36
    stretch fabrics First, baste the pieces of fabric together, and then sew without stretching the fabric. a Basting Using a free-arm style Free-arm sewing is convenient for sewing tubular and hard-to-reach areas. To change your machine to the free-arm style, lift out the flat bed attachment. Slide
  • Brother International SQ9050 | Users Manual - English - Page 37
    50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual Auto Manual Left J 00 00 00 00 00 00 00 Basic stitching, sewing gathers
  • Brother International SQ9050 | Users Manual - English - Page 38
    stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual
  • Brother International SQ9050 | Users Manual - English - Page 39
    stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual
  • Brother International SQ9050 | Users Manual - English - Page 40
    Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Hand-look quilting Zigzag stitch (for quilting) Appliqué stitch (for quilting) Quilting stippling Decorative stitch Pattern No. Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual Auto
  • Brother International SQ9050 | Users Manual - English - Page 41
    stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual
  • Brother International SQ9050 | Users Manual - English - Page 42
    VARIOUS STITCHES Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application N 80 75 68 59 53 43
  • Brother International SQ9050 | Users Manual - English - Page 43
    stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual
  • Brother International SQ9050 | Users Manual - English - Page 44
    70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching OVERCASTING STITCHES You can use the overcasting stitches to join together seams and finish them in one operation. They are also useful for sewing stretch
  • Brother International SQ9050 | Users Manual - English - Page 45
    to "Starting to sew" (page 29). • For details on sewing reverse/reinforcement stitches, refer to "Sewing reinforcement stitches" (page 30). ■ Changing the needle position With the straight stitch (left needle position) and the triple stretch stitch, the needle position can be adjusted. Pressing
  • Brother International SQ9050 | Users Manual - English - Page 46
    VARIOUS STITCHES BLIND HEM STITCHING Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches mod Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching You can use the Blind Hem Stitch to
  • Brother International SQ9050 | Users Manual - English - Page 47
    When you change the needle drop point, raise the needle, and then change the stitch width. a a Wrong side of fabric b Right side of fabric • For details on changing the stitch width, refer to "Selecting a stitch" (page 28). Sew with the fold of the hem against the l presser foot guide. Remove
  • Brother International SQ9050 | Users Manual - English - Page 48
    stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching BUTTONHOLE SEWING Buttonholes can be sewn and buttons can be sewn on. Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual
  • Brother International SQ9050 | Users Manual - English - Page 49
    mm (3/8 inch) b 15 mm (9/16 inch) Attach buttonhole foot "A". c a Marks on fabric b Buttonhole sewing Pull out the button guide plate of buttonhole b foot "A", and then insert the button that will be put through the buttonhole. A Select a stitch. d Position the fabric with the front end of the
  • Brother International SQ9050 | Users Manual - English - Page 50
    use the seam ripper to cut open the buttonhole. 1 a Buttonhole lever b Bracket Gently hold the end of the upper thread in g your left hand, and then start sewing. X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. a Eyelet punch • When using the eyelet
  • Brother International SQ9050 | Users Manual - English - Page 51
    stitch width to the thickness of the d gimp thread. Lower the presser foot lever and the e buttonhole lever, and then start sewing. When sewing is finished, gently pull the gimp f thread to remove any slack. a Feed dog position lever (as seen from the rear of the machine) Use a handsewing needle
  • Brother International SQ9050 | Users Manual - English - Page 52
    closest to you. Then, slide the button so that the needle goes into the two holes toward the rear of the sewing machine, and then sew them in the same way. Select a stitch . (With models not provided e with stitch , select stitch .) Adjust the stitch width so that it is the same as f the distance
  • Brother International SQ9050 | Users Manual - English - Page 53
    the d top on both sides. The needle should be positioned on the zipper side of the foot for best results. 3 a Zipper foot b Right pin for sewing the left side of the zipper c Left pin for sewing the right side of the zipper Select stitch . a Lower the presser foot lever and fix either the b left
  • Brother International SQ9050 | Users Manual - English - Page 54
    the corresponding precautions when performing each of the following stitching operations. Stretch stitching Attach zigzag foot "J". b Attach zigzag foot "J". a Select stitch . c Select stitch . b Sew the fabric without stretching it. c Sew the elastic tape to the fabric while d stretching the
  • Brother International SQ9050 | Users Manual - English - Page 55
    stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching The stitches that can be used for sewing appliqués, patchwork and quilts are described below. Pattern No. Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Stitch Name Application Auto Manual Auto Manual
  • Brother International SQ9050 | Users Manual - English - Page 56
    on the left side Align the left side of the presser foot with the edge of the fabric, and sew using stitch . 1 a 6.5 mm (1/4 inch) Memo ● To change the width of the seam allowance (the needle position), adjust the stitch width. For details, refer to "Changing the needle position" (page 43). 54
  • Brother International SQ9050 | Users Manual - English - Page 57
    " (page 26). Note ● When sewing with the walking foot, sew at a speed between slow and medium. 3 ■ Using the optional quilting guide Use the quilting guide to sew parallel stitches that are equally spaced. Hook the connecting fork of the walking foot c onto the needle clamp screw, lower the
  • Brother International SQ9050 | Users Manual - English - Page 58
    on quilting foot b Presser foot holder screw c Needle clamp screw Hold the quilting foot in place with your right c hand, and then tighten the presser foot holder screw using the screwdriver in your left hand. X The feed dogs are lowered. Turn on the sewing machine, and then select a e stitch. Use
  • Brother International SQ9050 | Users Manual - English - Page 59
    60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual Auto Manual Triple stretch stitch Attaching sleeves, sew- J 02
  • Brother International SQ9050 | Users Manual - English - Page 60
    hand, and then start sewing. a Do not reduce the gap. X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. Raise the presser foot lever, remove the g fabric, and cut the thread. Raise the buttonhole lever to its original h position. Memo ● If the fabric
  • Brother International SQ9050 | Users Manual - English - Page 61
    40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Various decorative stitches can be sewn with this sewing machine. Pattern No. Stitch Name Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual Auto Manual Fagoting stitch J 19
  • Brother International SQ9050 | Users Manual - English - Page 62
    stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Decorative stitch Pattern No. Application Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Auto Manual
  • Brother International SQ9050 | Users Manual - English - Page 63
    to fabric. Attach zigzag foot "J". a Select the straight stitch, and then adjust the b stitch length to 4.0 mm (3/16 inch) and loosen the thread tension. • For details, refer to "Selecting a stitch" (page 28) and "Adjusting thread tension" 3 (page 31). Sew parallel stitching at intervals of 1 cm
  • Brother International SQ9050 | Users Manual - English - Page 64
    made of thin fabrics. Fold the fabric along the bias. a Attach zigzag foot "J". b Select stitch , and then increase the thread c tension. • For details, refer to "Selecting a stitch" (page 28). Sew while making sure that the needle drops d slightly off the edge of the fabric. 1 Joining Decorative
  • Brother International SQ9050 | Users Manual - English - Page 65
    the sewing machine may be damaged. Manually pass the thread through the eye of the needle from the front to the back. For details, refer to "Upper threading" (page 17). Insert the wing needle. a • Use a 130/705H 100/16 wing needle. • For details on inserting a needle, refer to "Replacing the needle
  • Brother International SQ9050 | Users Manual - English - Page 66
    on the sewing machine. a Press the character stitch key and confirm that b the character stitch indicator lights up. a Stitch width adjustment key X The following display is shown on the LCD. N ABC ABC a Character stitch key b Character stitch indicator a Selected pattern No. b The position of
  • Brother International SQ9050 | Users Manual - English - Page 67
    of characters will be stored in memory even if you turn off the machine. Press (stitch selection keys) to select the b next character, "O" (No. 15). ■ Adding new characters after sewing After sewing a combination of characters, you N can add characters to the combination using the following
  • Brother International SQ9050 | Users Manual - English - Page 68
    sewing, the pattern No. of the first character in the current combination is shown on the LCD. N Checking characters You can check the characters in a combination with following method. Press the "+" or "-" side of a adjustment key) repeatedly. (stitch Stitch length adjustment key b The position
  • Brother International SQ9050 | Users Manual - English - Page 69
    ) Attach monogramming foot "N". b • For details, refer to "Replacing the presser foot" (page 25). Start sewing. c X The stitch is sewn in the direction indicated by the arrow. Memo ● When sewing characters, the machine automatically sews reinforcement stitches for each character. ● While sewing, the
  • Brother International SQ9050 | Users Manual - English - Page 70
    the same conditions as the real sewing, and adjust the stitch pattern as shown below. Memo ● The character stitches "034" (No. 31 + No. 34+ No. 35) are used for making adjustments. Attach monogramming foot "N". a • For details, refer to "Replacing the presser foot" (page 25). Combine the character
  • Brother International SQ9050 | Users Manual - English - Page 71
    . f Memo ● You can sew when you are in the stitch adjustment mode. If the stitch pattern still comes out poorly, adjust the stitch again. Adjust the stitch until the stitch pattern comes out correctly. After you have finished adjusting the pattern, g press the utility stitch key once, and then
  • Brother International SQ9050 | Users Manual - English - Page 72
    it again with a dry cloth. CAUTION ● Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur. Cleaning the bobbin case Sewing performance will suffer if dust collects in the bobbin case; therefore, it should be cleaned periodically. CAUTION ● Make
  • Brother International SQ9050 | Users Manual - English - Page 73
    needle may break or sewing performance may suffer. For a new bobbin case (part code: XE7560-001), contact your nearest authorized service center. 4 ● Make sure that you fit the bobbin case properly, otherwise the needle may break. • Do not put oil on the bobbin case. Insert the bobbin case
  • Brother International SQ9050 | Users Manual - English - Page 74
    Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at [http://solutions.brother.com]. If the problem persists, contact your dealer or the nearest authorized service center. Symptom The sewing machine does not work. The needle breaks. The upper thread breaks. Possible cause
  • Brother International SQ9050 | Users Manual - English - Page 75
    foot. Contact your retailer or the nearest authorized service center. - The bobbin case is scratched, or has a burr on it. Replace the bobbin case. Contact your retailer or the nearest authorized service center. - You have not used a bobbin that has been designed for this machine. Incorrect
  • Brother International SQ9050 | Users Manual - English - Page 76
    . The bobbin case is scratched. You have not used bobbin that has been designed for this machine. You have not moved the needle holder to its highest position. You have not inserted the needle properly. The presser foot that you are using is not correct for the type of stitch. The thread tension is
  • Brother International SQ9050 | Users Manual - English - Page 77
    was pressed if the foot controller is not connected) while the buttonhole lever is raised. Lower the buttonhole lever before continuing the operation. 4 The reverse/reinforcement stitch button or needle Move the bobbin winder position button was pressed while the bobbin winder shaft to the left
  • Brother International SQ9050 | Users Manual - English - Page 78
    26 presser foot lever 6, 17 pre-tension disk 12 Q quick-set bobbin 6, 16 quilting 55 quilting foot 56 quilting guide 55 R reinforcement stitching 57 reverse/reinforcement stitch button 6 S scallop stitching 61 seam ripper 48 sewing machine needles 21 sewing speed controller 6 sewing the
  • Brother International SQ9050 | Users Manual - English - Page 79
    cutter 30 thread guide 17 thread tension 31 trial sewing 32 triple stretch stitch 43 troubleshooting 72 twin needle 24 U upper tension-control dial 31 upper threading 17 utility stitch indicator 7, 28 utility stitch key 7, 28 W walking foot 55 wing needle 63 Z zigzag stitch 32, 42, 53
  • Brother International SQ9050 | Users Manual - English - Page 80
    XE7680-3013 English 885-S39 Printed in China
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Please visit us at http://solutions.brother.com where you can get product support
and answers to frequently asked questions (FAQs).
KNOWING YOUR
SEWING MACHINE
SEWING BASICS
VARIOUS STITCHES
APPENDIX