Brother International XL-2230 Users Manual - English
Brother International XL-2230 Manual
View all Brother International XL-2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International XL-2230 manual content summary:
- Brother International XL-2230 | Users Manual - English - Page 1
Operation Manual - Brother International XL-2230 | Users Manual - English - Page 2
as threading needle, changing needle, threading bobbin, or changing presser foot, and the like. 15. Always unplug the machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. 16. This sewing machine - Brother International XL-2230 | Users Manual - English - Page 3
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY If this machine is fitted with a three-pin non-rewireable BS plug then replace the fuse only with an identical approved type, as originally fitted and to replace the fuse cover. If none the less the main plug is cut off be sure to remove the fuse and - Brother International XL-2230 | Users Manual - English - Page 4
UNPACKING INSTRUCTIONS Keep the carton and packing materials. You may have to take or send the machine to be repaired. If you do not pack it properly, or do not use the right packing material, the machine could be damaged. Please follow the diagram below to unpack the machine. IMPORTANT ● This - Brother International XL-2230 | Users Manual - English - Page 5
, the needle, or any other parts to make sure you fit them correctly. To repair or adjust the machine If the machine breaks down, or you need to adjust it, first follow the troubleshooting table in the Appendix of this operation manual to inspect and adjust the machine yourself. If the problem is - Brother International XL-2230 | Users Manual - English - Page 6
Patterns and Stitch Names ...16 Reverse Sewing Lever ...17 Using a Free-arm Style ...17 THREADING THE MACHINE 18 Winding the Bobbin ...18 Lower Threading ...20 Lower Threading (For One-touch lower threading 21 Upper Threading ...23 Using the Needle Threader (Models equipped with a needle threader - Brother International XL-2230 | Users Manual - English - Page 7
and Embroidering ...47 OPTIONAL ACCESSORIES 49 Using the Walking Foot ...49 Using the Quilting Foot ...50 Using the 1/4-Inch Quilting Foot ...51 6. APPENDIX ...53 MAINTENANCE ...54 Changing the Light Bulb ...54 Cleaning ...55 Troubleshooting ...57 Repacking the Machine ...60 INDEX ...61 6 - Brother International XL-2230 | Users Manual - English - Page 8
1 KNOWING YOUR SEWING MACHINE - Brother International XL-2230 | Users Manual - English - Page 9
KNOWING YOUR SEWING MACHINE THE MAIN PARTS 2 4 31 0 E 5 A 67 89 B D C 1 Bobbin winder (Page 18) This winds the thread onto the bobbin,which you use for the lower thread. 2 Spool pin (Page 18, 23) 3 Hole for vertical spool pin (Page 27) This holds a second spool of thread, if you want - Brother International XL-2230 | Users Manual - English - Page 10
designed these accessories to help you carry out most sewing tasks. 1 1. 2. 3. 4. 5. 6. 7. 8. 9. No. Part Name 1 Zipper foot (1 pc.) 2 Bobbin (3 pcs.) 3 Needle Pack (Regular Single Needle HAX130 (3 pcs.)) 4 Twin Needle (1 pc.) Part Code USA Others No. Part Name X59370-051 - Brother International XL-2230 | Users Manual - English - Page 11
be removed from the socket-outlet. ● When servicing the machine, or when removing covers or changing bulbs, the machine must be unplugged. (For U.S.A. only) ● This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in - Brother International XL-2230 | Users Manual - English - Page 12
bobbin cover, glass, etc.) 1 1 Foot controller CAUTION ● Do not allow pieces of cloth and dust to build up on the foot controller. Doing so could cause a fire or an electric shock. Note (For U.S.A. only) ● Foot Controller: Model N This foot controller can be used for Model XL-2121, XL-2125, XL-2230 - Brother International XL-2230 | Users Manual - English - Page 13
use a lot of force when loosening or tightening the needle clamp screw, otherwise certain parts of the sewing machine may be damaged. With the flat side of the needle toward the 5 back of the machine, put the needle in until it touches the needle stopper. 1 2 Remove the power supply plug from the - Brother International XL-2230 | Users Manual - English - Page 14
leave the power on and step on the controller, the machine will start and you may be injured. ● Always use the correct presser foot for the stitch pattern you have chosen. If you use the wrong presser foot, the needle may strike the presser foot and bend or break, and may cause injury. ● Only use - Brother International XL-2230 | Users Manual - English - Page 15
KNOWING YOUR SEWING MACHINE Flat-Bed Attachment The accessories are stored in a compartment inside the flat-bed attachment. 1 Slide the flat-bed attachment to the left to open it. 1 1 2 1 Flat-bed attachment 2 Storage compartment Note ● Put the accessories inside a bag, and then store the bag - Brother International XL-2230 | Users Manual - English - Page 16
the balance wheel to the front (counterclockwise) to set the 2 needle in the highest position. If the needle is in the down position when you turn the pattern selection dial, the needle, presser foot or fabric may be damaged. ■ 11 stitches 1 1 1 Pattern selection dial 2 Chosen pattern number - Brother International XL-2230 | Users Manual - English - Page 17
KNOWING YOUR SEWING MACHINE Patterns and Stitch Names 11 stitches Pattern 1 2 3 4 5 Stitch Name FOUR-STEP AUTOMATIC BUTTONHOLE STRAIGHT STITCH (Center Needle Position) STRAIGHT STITCH (Center Needle Position) STRAIGHT STITCH (Left Needle Position) TRIPLE STRETCH STITCH 6 ELASTIC OVERLOCK - Brother International XL-2230 | Users Manual - English - Page 18
you lightly push the foot controller. To sew forward, release the Reverse Sewing Lever. The machine will then sew forward. 1 1 Reverse sewing lever Using a Free-arm Style Free-arm sewing is convenient for sewing tubular and hard-to-reach areas. To change your machine to the free-arm style, lift out - Brother International XL-2230 | Users Manual - English - Page 19
work properly. Only use the bobbin that comes with this machine or bobbins of the same type (part code: SA156, SFB (XA5539-151)). Actual size 11.5 mm (7/16 inch) This model Older model 1 2 1Bobbin-winding tension disc 2Bobbin-winder shaft Put the spool of thread on the spool pin and 1 pass - Brother International XL-2230 | Users Manual - English - Page 20
to start. 6 1 2 1 Wound evenly 2 Wound poorly After the machine stops automatically when 7 the bobbin is full, take your foot off the foot controller. Cut the thread, slide the bobbin-winder shaft 8 to the left and remove the bobbin. Note ● The needle bar does not move when you slide the - Brother International XL-2230 | Users Manual - English - Page 21
the needle and resulting in injury. 1 Cover 2 Slide button Put the bobbin in so the thread comes out in 3 the direction shown by the arrow. 1 2 1 Wound evenly 2 Wound poorly ● The bobbin was designed specifically for this sewing machine. If bobbins from older models are used, the machine will - Brother International XL-2230 | Users Manual - English - Page 22
needle 1 and resulting in injury. • Replace the cover so that the end of the thread comes out from the left side of the cover (as shown by the line in the diagram). 1 2 1 Wound evenly 2 Wound poorly ● The bobbin was designed specifically for this sewing machine. If bobbins from older models - Brother International XL-2230 | Users Manual - English - Page 23
YOUR SEWING MACHINE Slide the button and open the cover. 2 1 2 Replace the bobbin cover. Put the left tab in 4 place (see arrow 1), and then press lightly on the right side (see arrow 2) until the cover clicks into place. 2 1 Cover 2 Slide button Put the bobbin in, feed the end of the thread - Brother International XL-2230 | Users Manual - English - Page 24
foot using the presser Foot 1 Lever. 1 1 Presser foot lever Raise the needle to its highest position by 2 turning the balance wheel toward you (counterclockwise) so that the mark on the balance wheel points directly up. If the needle is not correctly raised, the sewing machine can not be threaded - Brother International XL-2230 | Users Manual - English - Page 25
KNOWING YOUR SEWING MACHINE Put the thread behind the guide above the 6 needle. Thread the needle from front to back leaving a 7 thread tail of about 5 cm (2 inches). 1 Using the Needle Threader (Models equipped with a needle threader) Turn the power switch to 'O'. Lower the presser foot lever. - Brother International XL-2230 | Users Manual - English - Page 26
hook grabs it. While lightly holding the thread, turn the 5 needle threader lever toward the front of the machine (toward you). The hook will pull the thread through the needle. CAUTION ● The needle threader can only be used 1 2 1 with home sewing machine needles size 75/11-100/16. Check the - Brother International XL-2230 | Users Manual - English - Page 27
KNOWING YOUR SEWING MACHINE Drawing up the lower thread While lightly holding the end of the upper 1 thread, slowly turn the balance wheel to the front (counterclockwise) once by hand to lower and then raise the needle. ■ One-touch lower threading This is only available on certain models. You - Brother International XL-2230 | Users Manual - English - Page 28
. We have designed your machine so you can sew Threading the Left Needle with this needle and two top threads. You can use 1 Follow the same instructions for threading a the same color or two different colors of thread for making decorative stitches. Sewing with twin single needle. See page 23 - Brother International XL-2230 | Users Manual - English - Page 29
KNOWING YOUR SEWING MACHINE Tension of the Thread The tension of the thread will affect the quality of your stitches. You may need to adjust it when you change fabric or thread. Correct tension Correct tension is important as too much or too little tension will weaken your seams or cause puckers - Brother International XL-2230 | Users Manual - English - Page 30
-90/14 Thread synthetic For top-stitching mercerized 30 Silk 90/14-100/16 Memo ● For clear nylon thread, always use needle 90/14 - 100/16. ● You can also use the same thread for the bobbin thread and upper threading. CAUTION ● Make sure you follow the needle, thread, and fabric combinations - Brother International XL-2230 | Users Manual - English - Page 31
KNOWING YOUR SEWING MACHINE 30 - Brother International XL-2230 | Users Manual - English - Page 32
2 STRAIGHT AND ZIGZAG STITCHING - Brother International XL-2230 | Users Manual - English - Page 33
STRAIGHT AND ZIGZAG STITCHING Please Read Before Sewing CAUTION ● To avoid being injured, watch the needle carefully while you are using the machine. Keep your hands away from moving parts. ● Do not stretch or pull the fabric during sewing. If you do, the needle may be damaged and you may be - Brother International XL-2230 | Users Manual - English - Page 34
fabric out 2 gently to the left hand side. Cut both threads with the thread cutter on the 3 left hand side of the machine. 1 2 Lower the presser foot and start sewing in the 3 new direction. ■ Finishing Sewing You can use stitching to lock the threads at the end of the seam or where you need to - Brother International XL-2230 | Users Manual - English - Page 35
length, turn the buttonhole fine-adjusting screw with a large screwdriver in the - direction. ■ Zigzag (Satin) Stitch You can use the zigzag (satin) stitch for making decorative stitches. When sewing a zigzag (Satin) stitch, use a slightly looser upper-thread tension to produce more beautiful - Brother International XL-2230 | Users Manual - English - Page 36
3 BUILT-IN STITCHES - Brother International XL-2230 | Users Manual - English - Page 37
fabric under the area 1 you want to mend. Following the line of the tear, sew using the 2 Elastic Stitch. ■ Sewing Elastic Place the elastic on the fabric. 1 As you sew, stretch the elastic in front of and 2 behind the presser foot. When the fabric is unfolded you will have a 5 Blind hem - Brother International XL-2230 | Users Manual - English - Page 38
together and it is very effective when sewing knitted fabrics. If you are using nylon thread, the stitch will not be visible. Put the edge of the two pieces of fabric 1 together and center them under the presser foot. Sew them together using the Elastic stitch. 2 Make sure you keep the two fabric - Brother International XL-2230 | Users Manual - English - Page 39
BUILT-IN STITCHES 38 - Brother International XL-2230 | Users Manual - English - Page 40
4 SEWING BUTTONHOLES AND BUTTONS - Brother International XL-2230 | Users Manual - English - Page 41
) Sewn section a Pattern 1. Set the pattern selection dial to 'a'. 2. Lower the presser foot and sew 5 to 6 stitches. 3. Stop the machine when the needle is at the left side of the stitches and then raise the needle from the material. Step 2 b (Left side) 1. Turn the pattern selection dial to - Brother International XL-2230 | Users Manual - English - Page 42
and Cutting the Buttonhole To secure the stitching, turn the material 90 1 degrees counterclockwise and sew Straight Stitches to the end of the front bar tack of the buttonhole. Remove the material from the machine. We 2 recommend that you put pins across both ends of the buttonhole as protection - Brother International XL-2230 | Users Manual - English - Page 43
dial to the Zigzag Stitch for the width you want. Remove the power supply plug from the 2 outlet. Change the foot to the Button sewing foot. 3 Place the darning plate on the needle plate. 4 Remove the material from the machine. Cut 8 the upper and lower threads and tie both threads at the back of - Brother International XL-2230 | Users Manual - English - Page 44
5 USING ATTACHMENTS AND APPLICATIONS - Brother International XL-2230 | Users Manual - English - Page 45
Zipper Insertion Stitch Name Straight Stitch (Center Needle Position) Pattern Stitch Length [mm (inch.)] 2.5 (3/32) Foot Zipper Foot You can use the zipper foot to sew different types of zips, and can easily position it to the right or left side of the needle. When sewing the right - Brother International XL-2230 | Users Manual - English - Page 46
darning plate on the needle plate. Connect the power supply plug into the wall outlet. Set the Pattern Selection Dial to Straight 2 Stitch. 5 Put the section you want to darn under the 3 presser foot, together with a fabric for reinforcement. Lower the presser foot. 4 Begin sewing by alternating - Brother International XL-2230 | Users Manual - English - Page 47
a decoration. Baste the cut design to the fabric. 1 Carefully sew around the edge of the design 2 with a Zigzag Stitch. Cut away any fabric that is left outside the 3 stitching. Remove the basting, if necessary. 4 Memo ● Make reinforcing Straight Stitches at the beginning and the end of the zigzag - Brother International XL-2230 | Users Manual - English - Page 48
a pin during sewing, as the needle can break. You may also be injured. Monogramming and Embroidering Stitch Name Pattern Stitch Length [mm (inch.)] Stitch Width [mm Foot (inch.)] Other Zigzag Stitch 1.5 (1/16) 3.0 (1/8) Zigzag Stitch 2.0 (1/16) 5.0 (3/16) None Darning Plate Zigzag - Brother International XL-2230 | Users Manual - English - Page 49
and supporting the outside of the hoop with your little fingers. Fill in the design alternating from the outline 2 of the design to the inside and from the inside to the edge of the outline until the design is completely filled in. Keep the stitching close together. ■ Monogram Sew by moving - Brother International XL-2230 | Users Manual - English - Page 50
or sticking between the presser foot and material. 3 Note 5 ● Only use the walking foot for straight sewing (Center Needle Position) and zigzag stitching. Do not use other patterns. Switch the machine off. 1 Raise the needle and the presser foot. 2 1 Forked part of operation lever 2 Presser - Brother International XL-2230 | Users Manual - English - Page 51
start sewing, make sure you turn the balance wheel toward the front of the machine to check that the needle does not hit the presser foot. ● Be careful not to touch the needle, otherwise you may be injured. Stitch Name Straight Stitch (Center Needle Position) Straight Stitch (Center Needle Position - Brother International XL-2230 | Users Manual - English - Page 52
you start sewing, make sure you turn the balance wheel toward the front of the machine to check that the needle does not hit the presser foot. Put the darning plate on the needle plate. 5 Connect the power supply plug into the wall outlet. Using the 1/4-Inch Quilting Foot Stitch Name Pattern - Brother International XL-2230 | Users Manual - English - Page 53
USING ATTACHMENTS AND APPLICATIONS ■ Quickly stitch together a quilt. 1 2 1 Top of fabric. 2 Seam 3.2 millimetres (1/8 inch) 52 - Brother International XL-2230 | Users Manual - English - Page 54
6 APPENDIX - Brother International XL-2230 | Users Manual - English - Page 55
step on the foot controller, you may be injured. ● To avoid burns, let the light bulb cool down before you change it. Remove the power supply plug from the 1 outlet. Loosen the screw on the back of the sewing 2 head. Then remove the light cover from the machine. Put the light cover back on and - Brother International XL-2230 | Users Manual - English - Page 56
, you may get an electric shock or be injured. Switch the machine off and unplug it. 1 Raise the needle and the presser foot. 2 Loosen the presser-foot screw and the needle 3 clamp screw to remove the presser-foot holder and the needle. Grasp both sides of the needle plate cover, 4 and then slide it - Brother International XL-2230 | Users Manual - English - Page 57
Put the tabs on the needle plate cover into the 9 needle plate, and then slide the cover back on. CAUTION ● Never use a shuttle that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new shuttle (part code: XC3152-021), contact - Brother International XL-2230 | Users Manual - English - Page 58
the presser foot that is correct appropriate for the type of stitch that for the type of stitch that you want to - you want to sew. sew. The upper thread tension is too tight. Loosen the upper thread tension. page 28 The needle breaks. You are pulling the fabric too much. Lightly guide the - Brother International XL-2230 | Users Manual - English - Page 59
-foot holder properly. Choose a thread and needle that are appropriate for the type of fabric. Fit the presser-foot holder properly. The thread tension is incorrect. Adjust the tension of the upper thread. You have not used a bobbin that has been designed for this machine. Incorrect bobbins - Brother International XL-2230 | Users Manual - English - Page 60
under the needle plate or in the shuttle. Remove the needle plate cover and clean the plate and the shuttle. page 55 Dust has built up in the feed dogs or in the shuttle. Clean the shuttle. page 55 There is a highpitched noise while sewing. You have not threaded the upper thread properly. The - Brother International XL-2230 | Users Manual - English - Page 61
right Remove the darning plate. Choose a thread and needle that are appropriate for the type of fabric. Remove the tangle thread. If the thread is tangled in the shuttle, clean the shuttle. Replace the sewing light bulb. Reference - page 29 page 55 page 54 Repacking the Machine Keep the carton and - Brother International XL-2230 | Users Manual - English - Page 62
32, 44, 45 F T FABRIC/THREAD/NEEDLE COMBINATIONS 29 Thread Tension 28 Flat bed attachment with accessory compartment ...14, 17 Triple Stretch Stitch 32 Foot Controller 11 Troubleshooting 57 Foot Controller Jack 10 Twin Needle Sewing 27 Free-arm Style 17 U 6 G Upper Tension - Brother International XL-2230 | Users Manual - English - Page 63
ENGLISH XC5142-0212 Printed in China
Operation Manual
Operation Manual