Brother International XL-2600 Users Manual - English
Brother International XL-2600 Manual
 |
View all Brother International XL-2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International XL-2600 manual content summary:
- Brother International XL-2600 | Users Manual - English - Page 1
1 KNOWING YOUR SEWING MACHINE 2 STRAIGHT AND ZIGZAG STITCHING 3 BUILT-IN STITCHES 4 SEWING BUTTONHOLES AND BUTTONS 5 USING ATTACHMENTS AND APPLICATIONS 6 APPENDIX Operation Manual - Brother International XL-2600 | Users Manual - English - Page 2
as threading needle, changing needle, threading bobbin, or changing presser foot, and the like. 15. Always unplug the machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. 16. This sewing machine - Brother International XL-2600 | Users Manual - English - Page 3
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY If this machine is fitted with a three-pin non-rewireable BS plug approved by ASTA to BS 1362, i.e. carrying the mark, rating as marked on plug. Always replace the fuse cover. Never use plugs with the fuse cover omitted. WARNING: DO NOT CONNECT - Brother International XL-2600 | Users Manual - English - Page 4
if you need to take or send this machine to be repaired. PLEASE READ THESE INSTRUCTIONS BEFORE YOU USE THE MACHINE. To use the machine safely 1. Make sure you watch the needle carefully while you are sewing. Do not touch the handwheel, thread take-up lever, needle, or other moving parts. 2. Turn off - Brother International XL-2600 | Users Manual - English - Page 5
PARTS ...5 ACCESSORIES ...6 Optional Accessories ...6 USING YOUR SEWING MACHINE 7 Connecting Plugs ...7 Main Power and Sewing Light Switch ...8 Foot Controller ...8 Checking the Needle ...8 Replacing the Needle ...8 Changing the Presser Foot ...9 Flat Bed Attachment ...10 Using a Free-arm Style - Brother International XL-2600 | Users Manual - English - Page 6
...38 Appliqués ...39 Monogramming and Embroidering ...39 OPTIONAL ACCESSORIES 41 Using the Walking Foot ...41 Using the Quilting Foot ...42 Using the 1/4-inch Quilting Foot ...43 6. APPENDIX ...44 MAINTENANCE ...44 Changing the Light Bulb ...44 Cleaning ...44 Troubleshooting ...46 INDEX ...49 4 - Brother International XL-2600 | Users Manual - English - Page 7
the spool of thread. 3 Thread guide (Page 16, 21) This is used when winding the thread onto the bobbin and then threading the machine. 4 Thread take-up lever (Page 21) 5 Hole for extra spool pin (Page 25) This holds a second spool of thread for sewing with the twin needle. 6 Stitch width dial (Page - Brother International XL-2600 | Users Manual - English - Page 8
YOUR SEWING MACHINE ACCESSORIES The following accessories are stored in the flat bed attachment. We have designed these accessories to help you be able to carry out most sewing tasks. 1. 2. 3. 4. 5. 6. 7. 8. 9. No. Part Name 1 Zipper foot (1 pc.) 2 Bobbin (3 pcs.) 3 Needle Pack - Brother International XL-2600 | Users Manual - English - Page 9
Plugs Connect the foot controller plug to the 1 machine. Connect the power supply plug to a wall 2 outlet. Note ● When leaving the machine unattended, the main switch of the machine should be switched off or the plug must be removed from the wall outlet. ● When servicing the machine, or when - Brother International XL-2600 | Users Manual - English - Page 10
Model XL-3500, XL-2600, XL-3510, XL-2610, XL-3520, XL-2620. 8 1 2 1 Parallel space 2 Level surface (bobbin cover, glass, etc.) Replacing the Needle CAUTION ● Turn the main power switch off before you change the needle. If you leave the main power on and step on the foot controller, the machine will - Brother International XL-2600 | Users Manual - English - Page 11
or tightening the needle clamp screw, otherwise certain parts of the sewing machine may be damaged. Changing the Presser Foot CAUTION With the flat side of the needle toward the 5 back of the machine, insert the needle until it touches the needle stopper. Next, tighten the needle clamp using the - Brother International XL-2600 | Users Manual - English - Page 12
for sewing tubular and hard-to-reach areas. To change your machine to the free-arm style, lift out the flat bed attachment. Slide the flat bed attachment to the left to 1 release it. CAUTION ● If the presser foot is not installed with the correct orientation, the needle may strike the presser foot - Brother International XL-2600 | Users Manual - English - Page 13
, turn the handwheel toward you (counterclockwise) to set the needle in the highest position. If the needle is in the down position when you turn the pattern selection dial, the needle, presser foot or fabric may be damaged. To choose a stitch, simply turn the pattern selection dial in either - Brother International XL-2600 | Users Manual - English - Page 14
YOUR SEWING MACHINE Patterns and Stitch Names Pattern 35 Stitches 25 Stitches Stitch Name Recommended Width (mm (inch)) Recommended Length (mm (inch)) Instruction Manual Page 4-STEP AUTOMATIC BUTTONHOLE STRAIGHT STITCH ZIGZAG STITCH BLIND HEM STITCH SHELL TUCK STITCH ELASTIC STITCH STRETCH - Brother International XL-2600 | Users Manual - English - Page 15
35 Stitches 25 Stitches Stitch Name Recommended Width (mm (inch)) Recommended Length (mm (inch)) Instruction Manual Page Fixed ELASTIC OVERLOCK STITCH 3-5 (1/8-3/16) 2.5 (3/32) Fixed 31 1 2.5 (3/32) Fixed FEATHER STITCH 3-5 (1/8-3/16) 2.5 (3/32) Fixed 32 2.5 (3/32) Fixed ARROWHEAD - Brother International XL-2600 | Users Manual - English - Page 16
the "0" setting, material is not fed. This is used when sewing a button. The "F" range is for making a satin stitch (close zigzag stitch), which is used for making buttonholes and decorative stitches. The position needed for making the satin stitch varies according to the material and thread being - Brother International XL-2600 | Users Manual - English - Page 17
far as possible and hold it in that position while you lightly push the foot controller. To sew forward, release the reverse sewing lever. The machine will then sew forward. ■ 25 Stitches Selecting a Stretch Stitch Setting the stitch length dial to " " changes the selected pattern to a stretch - Brother International XL-2600 | Users Manual - English - Page 18
SEWING MACHINE THREADING THE MACHINE Winding the Bobbin CAUTION ● Only use bobbins (part code: SA156, SFB (XA5539-151)) that have been designed for this sewing machine. Using other bobbins may cause damage to the machine. ● We designed the bobbin that comes with this machine. If you use bobbins - Brother International XL-2600 | Users Manual - English - Page 19
the end of the thread, gently 4 press the foot controller to wind the thread CAUTION around the bobbin a few times. Then stop the machine. ● Make sure you follow the instructions carefully. If you do not cut the excess thread completely before winding the bobbin, when the thread runs low it may - Brother International XL-2600 | Users Manual - English - Page 20
on using the quick-set bobbin, see page 19. CAUTION ● Not winding the bobbin properly may cause the thread tension to loosen, and may break the needle. Raise the needle to its highest position by 1 turning the handwheel toward you (counterclockwise) and raise the presser foot lever. Slide the - Brother International XL-2600 | Users Manual - English - Page 21
slit, as shown. Lower Threading (for models equipped with a quick-set bobbin) This feature is only available on certain models. 1 CAUTION ● Winding the bobbin improperly may cause the thread tension to loosen, breaking the needle and resulting in injury. Reattach the bobbin cover. Put the left - Brother International XL-2600 | Users Manual - English - Page 22
with this machine. CAUTION ● Make sure you set the bobbin so the thread unrolls in the right direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle. • You can begin sewing immediately without drawing up the bobbin thread. If you - Brother International XL-2600 | Users Manual - English - Page 23
pin 2 Thread guide (back) 3 Thread guide (front) 4 Thread take-up lever 5 Mark on the handwheel CAUTION ● Make sure you thread the machine properly. Otherwise, the thread could tangle and break the needle. IMPORTANT: 1 Raise the presser foot using the presser foot lever. 1 1 Presser foot lever Raise - Brother International XL-2600 | Users Manual - English - Page 24
upper thread can not be wrapped around the thread take-up lever. Make sure you raise the presser foot lever and the thread take-up lever before you feed the upper thread. ● If you incorrectly feed the thread you may cause sewing problems. 1 2 3 1 Needle holder 2 Needle threader lever 3 Guide 22 - Brother International XL-2600 | Users Manual - English - Page 25
the hook grabs it. While lightly holding the thread, turn the 5 needle threader lever toward the front of the machine (toward you). The hook will pull the thread through the needle. CAUTION ● The needle threader can only be used with home sewing machine needles size 75/11-100/16. Check the table - Brother International XL-2600 | Users Manual - English - Page 26
of the machine under the presser foot. 1 2 1 Upper thread 2 Lower thread • The bobbin cover should still be removed. Draw up the lower thread as described in the 2 previous steps 1 to 3. Replace the bobbin cover. 3 Sewing with a Twin Needle We have designed your machine so you can sew with this - Brother International XL-2600 | Users Manual - English - Page 27
to sew. ■ Correct Tension Correct tension is important as too much or too little tension will weaken your seams or cause puckers on your fabric. 2 ■ Twin Needle Threading You should thread each needle separately. Thread the left needle. 1 Follow the same instructions for threading a single needle - Brother International XL-2600 | Users Manual - English - Page 28
YOUR SEWING MACHINE FABRIC, THREAD, AND NEEDLE COMBINATIONS Fabric Type Medium weight fabrics Lightweight fabrics Heavyweight fabrics Stretch fabrics Broadcloth Taffeta Flannel, Gabardine Lawn, Batiste Georgette Challis, Satin Denim Corduroy Tweed Jersey Tricot For top stitching Thread Type - Brother International XL-2600 | Users Manual - English - Page 29
■ Starting Sewing Turn the pattern selection dial to choose the 1 stitch number you want. You also need to set the pattern selection dial to the Straight Stitch or Triple Stretch Stitch. Raise the needle to its highest position and lift 2 the presser foot lever. Pull the upper thread though the - Brother International XL-2600 | Users Manual - English - Page 30
using the needle as a pivot. To prepare the machine for the next seam, 4 pull about 10 cm (4 inch) of thread through the toes of the presser foot toward the back of the machine. ■ Top Stitching and Stretch Materials You can use a straight stitch for top stitching and sewing lightweight fabrics - Brother International XL-2600 | Users Manual - English - Page 31
(1/64-1/8) (1/8-3/16) The Shell Tuck Stitch can be used to sew a picot (lace-like) edge on lightweight fabric. Set the pattern selection dial to the Shell Tuck 1 Stitch. Adjust the thread tension so that it is tighter 2 than normal. Place the fabric under the presser foot so that 3 it will be sewn - Brother International XL-2600 | Users Manual - English - Page 32
together and it is very effective when sewing knitted fabrics. If you are using nylon thread, the stitch will not be visible. Put the edge of the two pieces of fabric 1 together and center them under the presser foot. Elastic Stitching Stitch Stitch Stitch Name Pattern Length Width [mm (inch - Brother International XL-2600 | Users Manual - English - Page 33
when beginning to sew. Use thicker than normal threads for sewing. After sewing, remove the basting and the 4 paper. Finish by tying knots on the reverse side at the beginning and the end of the seams. 1 3 1.5 mm 1 First needle drop Overedge Stitching Stitch Stitch Stitch Name Pattern Length - Brother International XL-2600 | Users Manual - English - Page 34
finish them in one operation. The Overlock Stitches are also useful for sewing stretch materials while the Arrowhead Stitch is ideal for sewing the edge of a blanket. Set the pattern selection dial to an overedge 1 stitch. Put the fabric under the presser foot so that 2 the seamline (or arrowhead - Brother International XL-2600 | Users Manual - English - Page 35
13/64) Fixed 3-5 2.5 (3/32) (1/8-13/64) Decorative Stitch Fixed 3-5 2.5 (3/32) (1/8-3/16) Decorative Hem Stitch Fixed 3-5 2.5 (3/32) (1/8-3/16) Decorative Stitch Fixed 3-5 2.5 (3/32) (1/8-3/16) These stitches can be used for decorative top stitching and for smocking. Set the pattern - Brother International XL-2600 | Users Manual - English - Page 36
center of the presser foot and match it up to the two lines on the presser foot. ■ Making a Buttonhole Step Step 1 (Front bar tack) Sewn section a Pattern 1. Set the pattern selection dial to 'a'. 2. Lower the presser foot and sew 5 to 6 stitches. 3. Stop the machine when the needle is at the - Brother International XL-2600 | Users Manual - English - Page 37
adjustment ensures both sides of the buttonhole are the same. 2 1 3 Adjusting Buttonholes If the stitching on the two sides of the buttonhole is not the same, you can make the following adjustments. Set the stitch length dial between "F" and 1.5 1 and sew the buttonhole on a scrap piece of fabric - Brother International XL-2600 | Users Manual - English - Page 38
between the 1 buttonholes and set the pattern selection dial to the Zigzag Stitch, and set the width you want. Remove the power supply plug from the 2 outlet. Change the foot to the button sewing foot. 3 Place the darning plate on the needle plate. 4 Remove the material from the machine. Cut 8 the - Brother International XL-2600 | Users Manual - English - Page 39
1 Stitch. Set the stitch length between 2 (1/16 inch) and 3 (1/8 inch). Set the stitch width at 2.5 (3/32 inch). CAUTION ● Make sure the needle does not hit the zipper during sewing. If the needle hits the zipper, the needle may break and you may be injured. Lower the presser foot lever and fix - Brother International XL-2600 | Users Manual - English - Page 40
plate on the needle plate. Connect the power supply plug to the wall outlet. Set the pattern selection dial to the Straight 2 Stitch. Put the section you want to darn under the 3 presser foot together with fabric for reinforcement. Lower the presser foot. 4 Begin sewing by alternating between - Brother International XL-2600 | Users Manual - English - Page 41
stitching. CAUTION ● Be careful that the needle does not hit a pin during sewing. The needle could break, and you may be injured. Set the pattern selection dial to Zigzag Stitch the work under the needle and lower the 5 presser bar with the foot removed. Pull the lower thread up through the - Brother International XL-2600 | Users Manual - English - Page 42
the design by moving the 1 embroidery hoop. CAUTION ● Keep fingers away from moving parts, especially needles. ■ Monogramming Sew by moving the hoop slowly along the 1 lettering at a constant speed. Secure with a few straight stitches at the end 2 of the last letter. Fill in the design alternating - Brother International XL-2600 | Users Manual - English - Page 43
stitches can not be sewn with the walking foot. Remove the power supply plug from the 1 outlet. Raise the needle and the presser foot. 2 Loosen the presser foot screw to remove the 3 presser foot holder. 1 Forked part of operation lever 2 Presser bar holder 5 3 Needle clamp Lower the presser - Brother International XL-2600 | Users Manual - English - Page 44
Stitch Any 2.5 Darning (3/32) Plate The Quilting Foot is useful for darning and free-motion machine quilting. Remove the power supply plug from the 1 outlet. Raise the needle and the presser foot. 2 Loosen the presser foot screw to remove the 3 presser foot holder. 1 Presser foot screw 2 Needle - Brother International XL-2600 | Users Manual - English - Page 45
1/4-inch Quilting Foot. 3 Position the presser foot over the fabric and 4 sew as shown in the illustration below. ■ Achieving an Accurate Seam Allowance 1 2 1 Quilting design The length of the stitch depends on how 8 quickly you move the fabric and on the machine's sewing speed. Sew while moving - Brother International XL-2600 | Users Manual - English - Page 46
electric shock or being injured. Switch the machine off and unplug it. 1 Raise the needle and the presser foot. 2 Loosen the presser foot screw and the needle 3 clamp screw to remove the presser foot holder and the needle. Replace the sewing light bulb. 3 1 2 3 1 Bulb 2 Loosen 3 Tighten 44 Grasp - Brother International XL-2600 | Users Manual - English - Page 47
1 Cleaning brush 2 Race • Do not apply oil to the bobbin case. CAUTION ● Never use a bobbin case that is scratched; otherwise the upper thread may become tangled, the needle may break, or sewing performance may suffer. For a new bobbin case (part code: XC8993-021), contact your nearest authorized - Brother International XL-2600 | Users Manual - English - Page 48
. Replace the needle plate. Contact your retailer or the nearest authorized service center. The area around the hole in the presser foot is scratched. Replace the presser foot. Contact your retailer or the nearest authorized service center. The bobbin case is scratched. Replace the bobbin case - Brother International XL-2600 | Users Manual - English - Page 49
. Replace the needle plate. Contact your retailer or the nearest authorized service center. - The upper The area around the hole in the presser foot is scratched. Replace the presser foot. Contact your retailer or the nearest authorized service center. - thread breaks. The bobbin case is - Brother International XL-2600 | Users Manual - English - Page 50
the presser foot that is correct for the type of stitch that you want to sew. The stitch is not sewn correctly. The thread tension is incorrect. The thread is tangled. Adjust the tension of the upper thread. Remove the tangled thread. If the thread is tangled in the bobbin case, clean the bobbin - Brother International XL-2600 | Users Manual - English - Page 51
with fabric and thread 26 replacing 8 Needle threader 22 O Overedge stitching 31 P Patchworking 31 Pattern selection dial 11 Patterns 12 Presser foot changing 9 Q Quick-set bobbin 19, 24 Quilting foot 42 R Race cleaning 44 Repacking instructions 2 Reverse sewing lever 15 S Satin - Brother International XL-2600 | Users Manual - English - Page 52
ENGLISH 885-S25/S27 XC6771-021 Printed in China
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
 |
 |
6
5
4
3
2
1
Operation Manual
SEWING BUTTONHOLES
AND BUTTONS
BUILT-IN STITCHES
APPENDIX
USING ATTACHMENTS
AND APPLICATIONS
STRAIGHT AND
ZIGZAG STITCHING
KNOWING YOUR
SEWING MACHINE