Brother International XL-3500 Owner's Manual (Español) - Spanish
Brother International XL-3500 Manual
View all Brother International XL-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International XL-3500 manual content summary:
- Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 1
1 KNOWING YOUR SEWING MACHINE 2 STRAIGHT AND ZIGZAG STITCHING 3 BUILT-IN STITCHES 4 SEWING BUTTONHOLES AND BUTTONS 5 USING ATTACHMENTS AND APPLICATIONS 6 APPENDIX Operation Manual - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 2
as threading needle, changing needle, threading bobbin, or changing presser foot, and the like. 15. Always unplug the machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. 16. This sewing machine - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 3
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY If this machine is fitted with a three-pin non-rewireable BS plug approved by ASTA to BS 1362, i.e. carrying the mark, rating as marked on plug. Always replace the fuse cover. Never use plugs with the fuse cover omitted. WARNING: DO NOT CONNECT - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 4
drop or hit the machine. 4. Always consult this manual before you replace or fit presser feet, the needle, or any other parts to make sure you fit them correctly. To repair or adjust the machine If the machine breaks down or needs adjustment, first follow the troubleshooting table in the Appendix - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 5
YOUR SEWING MACHINE 5 THE MAIN PARTS ...5 ACCESSORIES ...6 Optional Accessories ...6 USING YOUR SEWING MACHINE 7 Connecting Plugs ...7 Main Power and Sewing Light Switch ...8 Foot Controller ...8 Checking the Needle ...8 Replacing the Needle ...8 Changing the Presser Foot ...9 Flat Bed Attachment - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 6
5. USING ATTACHMENTS AND APPLICATIONS 37 Zipper Insertion ...37 Gathering ...38 Darning ...38 Appliqués ...39 Monogramming and Embroidering ...39 OPTIONAL ACCESSORIES 41 Using the Walking Foot ...41 Using the Quilting Foot ...42 Using the 1/4-inch Quilting Foot ...43 6. APPENDIX ...44 - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 7
through the thread cutter to cut them. 9 Needle threader (Page 22) (This is only available on certain models.) 0 Quick-set bobbin (Page 19) (This is only available on certain models.) A Flat bed attachment with accessory compartment (Page 10) B Presser foot (Page 9) C Reverse sewing lever (Page - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 8
YOUR SEWING MACHINE ACCESSORIES The following accessories are stored in the flat bed attachment. We have designed these accessories to help you be able to carry out most sewing tasks. 1. 2. 3. 4. 5. 6. 7. 8. 9. No. Part Name 1 Zipper foot (1 pc.) 2 Bobbin (3 pcs.) 3 Needle Pack - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 9
Plugs Connect the foot controller plug to the 1 machine. Connect the power supply plug to a wall 2 outlet. Note ● When leaving the machine unattended, the main switch of the machine should be switched off or the plug must be removed from the wall outlet. ● When servicing the machine, or when - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 10
Model XL-3500, XL-2600, XL-3510, XL-2610, XL-3520, XL-2620. 8 1 2 1 Parallel space 2 Level surface (bobbin cover, glass, etc.) Replacing the Needle CAUTION ● Turn the main power switch off before you change the needle. If you leave the main power on and step on the foot controller, the machine will - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 11
or tightening the needle clamp screw, otherwise certain parts of the sewing machine may be damaged. Changing the Presser Foot CAUTION With the flat side of the needle toward the 5 back of the machine, insert the needle until it touches the needle stopper. Next, tighten the needle clamp using the - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 12
for sewing tubular and hard-to-reach areas. To change your machine to the free-arm style, lift out the flat bed attachment. Slide the flat bed attachment to the left to 1 release it. CAUTION ● If the presser foot is not installed with the correct orientation, the needle may strike the presser foot - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 13
dial to choose a pattern, turn the handwheel toward you (counterclockwise) to set the needle in the highest position. If the needle is in the down position when you turn the pattern selection dial, the needle, presser foot or fabric may be damaged. To choose a stitch, simply turn the pattern - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 14
SEWING MACHINE Patterns and Stitch Names Pattern 35 Stitches 25 Stitches Stitch Name Recommended Width (mm (inch)) Recommended Length (mm (inch)) Instruction Manual 16) TRIPLE STRETCH STITCH 0-5 (0-3/16) (Changes needle position) TRIPLE ZIGZAG STRETCH STITCH 3-5 (1/8-3/16) set to . 12 - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 15
Pattern 35 Stitches 25 Stitches Stitch Name Recommended Width (mm (inch)) Recommended Length (mm (inch)) Instruction Manual Page Fixed ELASTIC OVERLOCK STITCH 3-5 (1/8-3/16) 2.5 (3/32) Fixed 31 1 2.5 (3/32) Fixed FEATHER STITCH 3-5 (1/8-3/16) 2.5 (3/32) Fixed 32 2.5 (3/32) Fixed - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 16
SEWING MACHINE Instruction Manual settings on a scrap piece of fabric to observe the feeding of the material. 2 1 3 1 CAUTION ● If the stitches are bunched together, lengthen the stitch length and continue sewing. Do not continue sewing without lengthening the stitch length, otherwise the needle - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 17
possible and hold it in that position while you lightly push the foot controller. To sew forward, release the reverse sewing lever. The machine will then sew forward. ■ 25 Stitches Selecting a Stretch Stitch Setting the stitch length dial to " " changes the selected pattern to a stretch stitch - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 18
SEWING MACHINE THREADING THE MACHINE Winding the Bobbin CAUTION ● Only use bobbins (part code: SA156, SFB (XA5539-151)) that have been designed for this sewing machine. Using other bobbins may cause damage to the machine. ● We designed the bobbin that comes with this machine. If you use bobbins - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 19
the end of the thread, gently 4 press the foot controller to wind the thread CAUTION around the bobbin a few times. Then stop the machine. ● Make sure you follow the instructions carefully. If you do not cut the excess thread completely before winding the bobbin, when the thread runs low it may - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 20
KNOWING YOUR SEWING MACHINE Lower Threading • For more details on using the quick-set bobbin, see page 19. CAUTION ● Not winding the bobbin properly may cause the thread tension to loosen, and may break the needle. Raise the needle to its highest position by 1 turning the handwheel toward you ( - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 21
slit, as shown. Lower Threading (for models equipped with a quick-set bobbin) This feature is only available on certain models. 1 CAUTION ● Winding the bobbin improperly may cause the thread tension to loosen, breaking the needle and resulting in injury. Reattach the bobbin cover. Put the left - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 22
with this machine. CAUTION ● Make sure you set the bobbin so the thread unrolls in the right direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle. • You can begin sewing immediately without drawing up the bobbin thread. If you - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 23
pin 2 Thread guide (back) 3 Thread guide (front) 4 Thread take-up lever 5 Mark on the handwheel CAUTION ● Make sure you thread the machine properly. Otherwise, the thread could tangle and break the needle. IMPORTANT: 1 Raise the presser foot using the presser foot lever. 1 1 Presser foot lever Raise - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 24
upper thread can not be wrapped around the thread take-up lever. Make sure you raise the presser foot lever and the thread take-up lever before you feed the upper thread. ● If you incorrectly feed the thread you may cause sewing problems. 1 2 3 1 Needle holder 2 Needle threader lever 3 Guide 22 - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 25
the hook grabs it. While lightly holding the thread, turn the 5 needle threader lever toward the front of the machine (toward you). The hook will pull the thread through the needle. CAUTION ● The needle threader can only be used with home sewing machine needles size 75/11-100/16. Check the table - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 26
of the machine under the presser foot. 1 2 1 Upper thread 2 Lower thread • The bobbin cover should still be removed. Draw up the lower thread as described in the 2 previous steps 1 to 3. Replace the bobbin cover. 3 Sewing with a Twin Needle We have designed your machine so you can sew with this - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 27
to sew. ■ Correct Tension Correct tension is important as too much or too little tension will weaken your seams or cause puckers on your fabric. 2 ■ Twin Needle Threading You should thread each needle separately. Thread the left needle. 1 Follow the same instructions for threading a single needle - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 28
YOUR SEWING MACHINE FABRIC, THREAD, AND NEEDLE COMBINATIONS Fabric Type Medium weight fabrics Lightweight fabrics Heavyweight fabrics Stretch fabrics Broadcloth Taffeta Flannel, Gabardine Lawn, Batiste Georgette Challis, Satin Denim Corduroy Tweed Jersey Tricot For top stitching Thread Type - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 29
■ Starting Sewing Turn the pattern selection dial to choose the 1 stitch number you want. You also need to set the pattern selection dial to the Straight Stitch or Triple Stretch Stitch. Raise the needle to its highest position and lift 2 the presser foot lever. Pull the upper thread though the - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 30
dial to the Zigzag Stitch, and then start sewing. ■ Removing the Material from the Machine Stop the machine. 1 Raise the needle to its highest position and make sure that the thread take-up lever is also in its highest position. Lift the presser foot and pull the fabric out 2 gently to the - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 31
16) The Shell Tuck Stitch can be used to sew a picot (lace-like) edge on lightweight fabric. Set the pattern selection dial to the Shell Tuck 1 Stitch. Adjust the thread tension so that it is tighter 2 than normal. Place the fabric under the presser foot so that 3 it will be sewn along the bias - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 32
pieces of fabric together and it is very effective when sewing knitted fabrics. If you are using nylon thread, the stitch will not be visible. Put the edge of the two pieces of fabric 1 together and center them under the presser foot. Sew them together using the Elastic Stitch. 2 Make sure you keep - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 33
leaving a small space between them. Set the pattern selection dial to the Smocking 2 Stitch, Fagoting Stitch, or Decorative Stitch. Stitch along the edge, pulling both threads 3 slightly when beginning to sew. Use thicker than normal threads for sewing. After sewing, remove the basting and the - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 34
them in one operation. The Overlock Stitches are also useful for sewing stretch materials while the Arrowhead Stitch is ideal for sewing the edge of a blanket. Set the pattern selection dial to an overedge 1 stitch. Put the fabric under the presser foot so that 2 the seamline (or arrowhead point) is - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 35
3-5 2.5 (3/32) (1/8-3/16) Decorative Hem Stitch Fixed 3-5 2.5 (3/32) (1/8-3/16) Decorative Stitch Fixed 3-5 2.5 (3/32) (1/8-3/16) These stitches can be used for decorative top stitching and for smocking. Set the pattern selection dial to the Triangle Stitch, Leaf Stitch, etc. 3 33 - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 36
match it up to the two lines on the presser foot. ■ Making a Buttonhole Step Step 1 (Front bar tack) Sewn section a Pattern 1. Set the pattern selection dial to 'a'. 2. Lower the presser foot and sew 5 to 6 stitches. 3. Stop the machine when the needle is at the left side of the stitches and - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 37
Adjusting Buttonholes If the stitching on the two sides of the buttonhole is not the same, you can make the following adjustments. Set the stitch length dial between "F" and 1.5 1 and sew the buttonhole on a scrap piece of fabric to observe how the material is fed. 4 4 4 If the right side of the - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 38
the Zigzag Stitch, and set the width you want. Remove the power supply plug from the 2 outlet. Change the foot to the button sewing foot. 3 Place the darning plate on the needle plate. 4 Remove the material from the machine. Cut 8 the upper and lower threads and tie both threads at the back of the - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 39
zipper foot. Sew from the bottom of the zipper toward the 4 top on both sides. The needle should be positioned on the zipper side of the foot for best results. 1 2 3 To sew the opposite side of the zipper, first 5 turn the machine off and raise the presser foot lever. Release the zipper foot - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 40
plate on the needle plate. Connect the power supply plug to the wall outlet. Set the pattern selection dial to the Straight 2 Stitch. Put the section you want to darn under the 3 presser foot together with fabric for reinforcement. Lower the presser foot. 4 Begin sewing by alternating between - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 41
Be careful that the needle does not hit a pin during sewing. The needle could break, and you may be injured. Set the pattern selection dial to inside hoop. Put the work under the needle and lower the 5 presser bar with the foot removed. Pull the lower thread up through the starting 6 position by - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 42
with your middle and third fingers and supporting the outside of the hoop with your little fingers. ■ Embroidering Stitch the outline of the design by moving the 1 embroidery hoop. CAUTION ● Keep fingers away from moving parts, especially needles. ■ Monogramming Sew by moving the hoop slowly along - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 43
are difficult to feed when sewing. The walking foot prevents these materials from crumpling, slipping or sticking between the presser foot and the material. Attach the forked section of the connecting 4 lever to the needle clamp, and fit the walking foot to the presser bar. 1 2 3 Note ● Only use - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 44
. Attach the quilting foot, making sure that part 4 A shown in the illustration is above the needle clamp screw. Then lower the presser foot lever and tighten the presser foot screw. • Make sure that the needle clamp screw is firmly tightened. A 1 2 Note ● When sewing with the walking foot, sew - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 45
1 Attach the 1/4-inch Quilting Foot. 3 Position the presser foot over the fabric and 4 sew as shown in the illustration below. ■ Achieving an Accurate Seam Allowance 1 2 1 Quilting design The length of the stitch depends on how 8 quickly you move the fabric and on the machine's sewing speed. Sew - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 46
electric shock or being injured. Switch the machine off and unplug it. 1 Raise the needle and the presser foot. 2 Loosen the presser foot screw and the needle 3 clamp screw to remove the presser foot holder and the needle. Replace the sewing light bulb. 3 1 2 3 1 Bulb 2 Loosen 3 Tighten 44 Grasp - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 47
apply oil to the bobbin case. CAUTION ● Never use a bobbin case that is scratched; otherwise the upper thread may become tangled, the needle may break, or sewing performance may suffer. For a new bobbin case (part code: XC8993-021), contact your nearest authorized service center. ● Make sure that - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 48
APPENDIX Troubleshooting If the machine stops working properly, check the following possible problems. If the problem is still there, contact your retailer or the nearest authorized service center. Symptom The sewing machine does not work. The needle breaks. The upper thread breaks. Possible - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 49
. Replace the needle plate. Contact your retailer or the nearest authorized service center. - The upper The area around the hole in the presser foot is scratched. Replace the presser foot. Contact your retailer or the nearest authorized service center. - thread breaks. The bobbin case is - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 50
. Attach the presser foot that is correct for the type of stitch that you want to sew. The stitch is not sewn correctly. The thread tension is incorrect. The thread is tangled. Adjust the tension of the upper thread. Remove the tangled thread. If the thread is tangled in the bobbin case, clean - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 51
with fabric and thread 26 replacing 8 Needle threader 22 O Overedge stitching 31 P Patchworking 31 Pattern selection dial 11 Patterns 12 Presser foot changing 9 Q Quick-set bobbin 19, 24 Quilting foot 42 R Race cleaning 44 Repacking instructions 2 Reverse sewing lever 15 S Satin - Brother International XL-3500 | Owner's Manual (Español) - Spanish - Page 52
ENGLISH 885-S25/S27 XC6771-021 Printed in China
6
5
4
3
2
1
Operation Manual
SEWING BUTTONHOLES
AND BUTTONS
BUILT-IN STITCHES
APPENDIX
USING ATTACHMENTS
AND APPLICATIONS
STRAIGHT AND
ZIGZAG STITCHING
KNOWING YOUR
SEWING MACHINE