Brother International XR-9000 Users Manual - English

Brother International XR-9000 Manual

Get Brother International XR-9000 PDF manuals and user guides View all Brother International XR-9000 manuals
Add to My Manuals
Save this manual to your list of manuals

Brother International XR-9000 manual content summary:

  • Brother International XR-9000 | Users Manual - English - Page 1
    KNOWING YOUR SEWING MACHINE SEWING BASICS VARIOUS STITCHES APPENDIX Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs).
  • Brother International XR-9000 | Users Manual - English - Page 2
    and unplug the power cord. When transporting the sewing machine, be sure to carry it by its handle. Lifting the sewing machine by any other part may damage the machine or result in the machine falling, which could cause injuries. When lifting the sewing machine, be careful not to make any sudden or
  • Brother International XR-9000 | Users Manual - English - Page 3
    soaps or detergents to clean the case. Benzene, thinner, and scouring powders can damage the case and machine, and should never be used. • Always consult the operation manual when replacing or installing any assemblies, the presser feet, needle, or other parts to assure correct installation. 1
  • Brother International XR-9000 | Users Manual - English - Page 4
    first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother dealer. Use this machine only for its intended use as described in this manual. Use accessories recommended by
  • Brother International XR-9000 | Users Manual - English - Page 5
    CONTENTS 1. KNOWING YOUR SEWING MACHINE 5 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS 5 The main parts ...5 Needle and presser foot section ...6 Operation buttons ...6 Operation panel ...7 Flat bed attachment ...7 ACCESSORIES ...8 Optional accessories ...8 USING YOUR SEWING MACHINE 9 Power supply
  • Brother International XR-9000 | Users Manual - English - Page 6
    ...66 Deleting characters ...66 Sewing the character stitches ...67 ADJUSTING STITCHES (for models equipped with character stitches 68 4. APPENDIX ...70 MAINTENANCE ...70 Cleaning the machine surface ...70 Cleaning the bobbin case ...70 TROUBLESHOOTING ...72 ERROR MESSAGES ...75 Operation beep
  • Brother International XR-9000 | Users Manual - English - Page 7
    the feed dog position lever to lower the feed dogs. p Presser foot lever (page 17) Used to raise and lower the presser foot. q Foot controller (page 10) You can use this to control the sewing speed, and to start and stop sewing. r Handle Carry the sewing machine by its handle when transporting the
  • Brother International XR-9000 | Users Manual - English - Page 8
    bar thread guide. k Needle clamp screw Use the needle clamp screw to hold the needle in place. Operation buttons The operation buttons help you to easily perform various basic sewing machine operations. The operation buttons differ depending on the sewing machine model. a Presser foot lever Raise
  • Brother International XR-9000 | Users Manual - English - Page 9
    panel The operation panel, located on the front of the sewing machine, allows you to select a stitch and specify how the stitch will be sewn. 1 3 ABC a LCD (liquid crystal display) The number of the selected stitch (1), the presser foot to be used (2), the stitch length (mm) (3), and the stitch
  • Brother International XR-9000 | Users Manual - English - Page 10
    designed these accessories to help you be able to carry out most sewing tasks. Note (For U.S.A. only) ● Foot controller: Model T This foot controller can be used on this machine model XR-9000. ● The screw of the presser foot holder is available through your authorized dealer. (Part code: 132730-122
  • Brother International XR-9000 | Users Manual - English - Page 11
    on. Note ● If a power outage occurs while the sewing machine is being operated, turn off the sewing machine and unplug the power supply cord. When restarting the sewing machine, follow the necessary procedure to correctly operate the machine. (For U.S.A. only) ● This appliance has a polarized plug
  • Brother International XR-9000 | Users Manual - English - Page 12
    on the sewing machine. After turning on the sewing machine, release the "-" side of (stitch selection key). Note ● When the foot controller is plugged in, the start/stop button cannot be used to start sewing (only for models equipped with the start/stop button). X The needle stop position changes
  • Brother International XR-9000 | Users Manual - English - Page 13
    straight stitch (center needle position) is automatically selected when it is turned on. Turn off the sewing machine. a Turn off the sewing machine. a Hold down the "+" side of (stitch selection b key) on the left and turn on the sewing machine. After turning on the sewing machine, release the
  • Brother International XR-9000 | Users Manual - English - Page 14
    disk b Bobbin winder shaft c Bobbin CAUTION ● Only use bobbins (part code: SA156, SFB) that have been designed for this sewing machine. Using other bobbins may cause damage to the machine. ● We designed the bobbin that comes with this machine. If you use bobbins from other models, the machine will
  • Brother International XR-9000 | Users Manual - English - Page 15
    the thread runs low it may tangle around the bobbin and cause the needle to break. Slide the sewing speed controller to the right h (to set the speed to fast) (for models equipped with the sewing speed controller). Memo ● When the sewing machine is started or the handwheel is turned after winding
  • Brother International XR-9000 | Users Manual - English - Page 16
    seat, the thread may become tangled in the bobbin or the needle may bend or break when the bobbin thread starts to run out. a Sewing speed controller Turn on the sewing machine. g Press the foot controller or press (start/ h stop button) (for models equipped with the start/stop button) to start
  • Brother International XR-9000 | Users Manual - English - Page 17
    breaking the needle and resulting in injury. 1 2 a Wound evenly b Wound poorly ● The bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the enclosed bobbin or bobbins of the same type (part code: SA156
  • Brother International XR-9000 | Users Manual - English - Page 18
    KNOWING YOUR SEWING MACHINE Replace the bobbin cover. Put the left tab in e place (see arrow a), and then press lightly on the right side (see arrow b) until the cover clicks into place. • If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may
  • Brother International XR-9000 | Users Manual - English - Page 19
    on the wheel points up, or press (needle position button) (for models equipped with the needle position button) once or twice to raise the needle. a Presser foot lever or a Mark b Needle position button • If the needle is not correctly raised, the sewing machine can not be threaded. Be sure to
  • Brother International XR-9000 | Users Manual - English - Page 20
    the presser foot lever and the thread take-up lever before you feed the upper thread. ● If you incorrectly feed the thread you may cause sewing problems. ■ Using the needle threader (for models equipped with the needle threader) CAUTION ● The needle threader can only be used with home sewing machine
  • Brother International XR-9000 | Users Manual - English - Page 21
    threader lever. d Pull out about 5 cm (2 inch) of thread through g the needle toward the back of the sewing machine. 1 X The end of the needle threader rotates toward you and the hook passes through the eye of the needle. Catch the thread on the hook as shown below. e a Hook b Thread While lightly
  • Brother International XR-9000 | Users Manual - English - Page 22
    YOUR SEWING MACHINE Drawing up the lower thread Lightly hold the end of the upper thread. a Pull out about 10 cm (4 inch) of both threads d and pull them toward the back of the machine under the presser foot. a Upper thread While holding the end of the upper thread, b raise the needle either
  • Brother International XR-9000 | Users Manual - English - Page 23
    follow the instructions below. CAUTION ● Only use home sewing machine needles. Use of any other needle may bend the needle or damage the machine. ● Never use bent needles. Bent needles can easily break, possibly resulting in injury. Needle types and their uses The sewing machine needle that should
  • Brother International XR-9000 | Users Manual - English - Page 24
    a bent needle. CAUTION ● Before replacing the needle, be sure to turn off the sewing machine, otherwise injuries may occur if the foot controller or the start/ stop button is accidentally pressed and the machine starts sewing. Lower the presser foot lever. c 1 a Flat surface a Presser foot lever
  • Brother International XR-9000 | Users Manual - English - Page 25
    • Do not apply strong force when loosening or tightening the needle clamp screw, otherwise certain parts of the sewing machine may be damaged. CAUTION ● Be sure to insert the needle until it touches the needle stopper and securely tighten the needle clamp screw with the screwdriver, otherwise the
  • Brother International XR-9000 | Users Manual - English - Page 26
    ) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. ● When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the machine may be damaged. ● When changing the sewing direction, be sure
  • Brother International XR-9000 | Users Manual - English - Page 27
    models equipped with (needle position button), raise the needle by pressing once or twice.) or a Mark b Needle position button If the sewing machine has been turned on, b turn it off. a Black button b Presser foot holder Place a different presser foot below the holder e so that the presser foot
  • Brother International XR-9000 | Users Manual - English - Page 28
    the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the screwdriver to remove the presser foot holder. ■ Removing the presser foot holder Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page
  • Brother International XR-9000 | Users Manual - English - Page 29
    are described below. Before operating the sewing machine, read the following precautions. 2 CAUTION ● While the machine is in operation, pay special attention to the needle location. In addition, keep your hands away from all moving parts such as the needle and handwheel, otherwise injuries may
  • Brother International XR-9000 | Users Manual - English - Page 30
    needle position) is selected. ■ [Example] Selecting stitch (No. 04) Turn on the sewing machine. a Attach the presser foot indicated on the LCD. d a The presser foot to use • For details, refer to "Replacing the presser foot the stitch length or stitch width is reset back to the auto setting, the
  • Brother International XR-9000 | Users Manual - English - Page 31
    sew Raise the needle by turning the handwheel a toward you (counterclockwise) so that the mark on the wheel points up. (With models equipped with (needle position button), raise the needle by pressing once or twice.) 2 or a Mark b Needle position button Raise the presser foot lever. b a Presser
  • Brother International XR-9000 | Users Manual - English - Page 32
    BASICS Lower the presser foot lever. e Raise the presser foot lever. j Pull the fabric to the left side of the machine, k and then pass the threads through the thread cutter to cut them. a Presser foot lever On models equipped with a sewing speed f controller, slide the sewing speed controller
  • Brother International XR-9000 | Users Manual - English - Page 33
    puckers on your fabric. 1 Memo ● When you finish sewing, remove the bobbin cover and then make sure that the thread is shown as below the upper thread was incorrectly threaded, the upper thread may be too loose. In this case, refer to "Upper threading" (page 17) and rethread the upper thread. 1 5
  • Brother International XR-9000 | Users Manual - English - Page 34
    button) once (for models equipped with the needle position button). CAUTION ● When using the twin needle, be sure to raise the needle before changing the sewing direction. If the fabric is turned while the needle is lowered, the needle may bend or break. Raise the presser foot lever, and then turn
  • Brother International XR-9000 | Users Manual - English - Page 35
    button on the left side of the b foot. Keep the button held in and lower the presser foot. Sewing hook-and-loop fastener CAUTION ● Use only the ungummed hook-and-loop fastener which is for sewing. If the glue is attached to the needle or the bobbin hook race, it may cause malfunction. ● If
  • Brother International XR-9000 | Users Manual - English - Page 36
    stretch fabrics First, baste the pieces of fabric together, and then sew without stretching the fabric. a Basting Using a free-arm style Free-arm sewing is convenient for sewing tubular and hard-to-reach areas. To change your machine to the free-arm style, lift out the flat bed attachment. Slide
  • Brother International XR-9000 | Users Manual - English - Page 37
    attach zigzag foot "J", otherwise the needle may break or the 3 machine may be damaged. Utility stitches Straight Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse
  • Brother International XR-9000 | Users Manual - English - Page 38
    Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot , J 16 16 16 15 15 15 decorative stitching and 15 sewing overcasting on both pieces of fabrics, 5.0 (3/16) 2.5-7.0 (3/32
  • Brother International XR-9000 | Users Manual - English - Page 39
    Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)]
  • Brother International XR-9000 | Users Manual - English - Page 40
    Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot - motion quilting, satin 0.0-7.0 0.0-4.0 No Yes Rfc. stitching, button sewing (0-1/4) (0-3/16) J 47 47 47 41 41 - - Attaching
  • Brother International XR-9000 | Users Manual - English - Page 41
    Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)]
  • Brother International XR-9000 | Users Manual - English - Page 42
    VARIOUS STITCHES Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application N 80 75 68 59 53 43
  • Brother International XR-9000 | Users Manual - English - Page 43
    Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No. Application Stitch Width Stitch Length [mm (inch.)]
  • Brother International XR-9000 | Users Manual - English - Page 44
    Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot . Attach overcasting foot "G" or zigzag foot "J". a Sew with the edge of the fabric against the d presser foot guide. Select a
  • Brother International XR-9000 | Users Manual - English - Page 45
    are used for sewing plain seams. Three stitches are available for basic stitching. Straight Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement
  • Brother International XR-9000 | Users Manual - English - Page 46
    VARIOUS STITCHES BLIND HEM STITCHING Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches mod Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching You can use the Blind Hem Stitch to
  • Brother International XR-9000 | Users Manual - English - Page 47
    you change the needle drop point, raise the needle, and then change the stitch width. a a Wrong side of fabric b Right side of fabric • For details on changing the stitch width, refer to "Selecting a stitch" (page 28). Sew with the fold of the hem against the l presser foot guide. Remove the
  • Brother International XR-9000 | Users Manual - English - Page 48
    VARIOUS STITCHES Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching BUTTONHOLE SEWING Buttonholes can be sewn and buttons can
  • Brother International XR-9000 | Users Manual - English - Page 49
    is used for sewing buttonholes, are indicated below. 1 2 5 ■ If the button does not fit in the button guide plate Add together the diameter and thickness of the button, and then set the button guide plate to the calculated length. (The distance between the markings on the presser foot scale is 5 mm
  • Brother International XR-9000 | Users Manual - English - Page 50
    will not be sewn with the correct size. Raise the presser foot lever, remove the h fabric, and cut the thread. Raise upper thread in g your left hand, and then start sewing. X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. a Eyelet punch • When
  • Brother International XR-9000 | Users Manual - English - Page 51
    of the d gimp thread. Lower the presser foot lever and the e buttonhole lever, and then start sewing. When sewing is finished, gently pull the gimp f thread to remove any slack. a Feed dog position lever (as seen from the rear of the machine) Use a handsewing needle to pull the gimp g thread to
  • Brother International XR-9000 | Users Manual - English - Page 52
    the two holes closest to you. Then, slide the button so that the needle goes into the two holes toward the rear of the sewing machine, and then sew them in the same way. Select a stitch . (With models not provided e with stitch , select stitch .) Adjust the stitch width so that it is the same as
  • Brother International XR-9000 | Users Manual - English - Page 53
    [mm (inch.)] Stitch Name Application * Auto Auto Manual Manual Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Straight
  • Brother International XR-9000 | Users Manual - English - Page 54
    VARIOUS STITCHES SEWING STRETCH FABRICS AND ELASTIC TAPE Pattern Presser Foot 100 stitches mode 90 stitches mode 80 stitches mode 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stretch fabrics can
  • Brother International XR-9000 | Users Manual - English - Page 55
    QUILT STITCHING Pattern Presser Foot 100 stitches mode 90 stitches mode 80 stitches mode 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching The stitches that can be used for sewing appliqués, patchwork and
  • Brother International XR-9000 | Users Manual - English - Page 56
    ■ For a seam allowance on the right side Align the right side of the presser foot with the edge of the fabric, and sew using stitch . 1 CAUTION ● Be careful that the needle does not hit a pin during sewing, as the needle can break. You may also be injured. Patchwork (crazy quilt) stitching Fold the
  • Brother International XR-9000 | Users Manual - English - Page 57
    quilting guide Use the quilting guide to sew parallel stitches that are equally spaced. Hook the connecting fork of the walking foot c onto the needle clamp screw, lower the presser foot lever, and then use the presser foot holder screw to attach the walking foot to the presser bar. Insert
  • Brother International XR-9000 | Users Manual - English - Page 58
    of the machine) a Pin on quilting foot b Presser foot holder screw c Needle clamp screw Hold the quilting foot in place with your right c hand, and then tighten the presser foot holder screw using the screwdriver in your left hand. X The feed dogs are lowered. Turn on the sewing machine, and then
  • Brother International XR-9000 | Users Manual - English - Page 59
    , such as sleeve holes, inseams and pocket corners. Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Stitch Name Pattern No
  • Brother International XR-9000 | Users Manual - English - Page 60
    the d pocket faces toward you, and then lower the presser foot lever so that the needle drops 2 mm (1/16 inch) in front of the pocket start sewing. a Do not reduce the gap. X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. Raise the presser foot lever
  • Brother International XR-9000 | Users Manual - English - Page 61
    Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching Various decorative stitches can be sewn with this sewing machine. Pattern
  • Brother International XR-9000 | Users Manual - English - Page 62
    Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot or a sheet of water-soluble stabilizer. 3 1 Sew with the center of the presser foot f aligned along the center of the two pieces of
  • Brother International XR-9000 | Users Manual - English - Page 63
    . Attach monogramming foot "N". a Select stitch . b Stitch along the edge of the fabric, making c sure not to sew directly on the stitches. d a 1 cm (3/8 inch) • Do not sew reverse/reinforcement stitches or cut the thread. Pull the bobbin threads to create gathers. d Smooth the gathers by ironing
  • Brother International XR-9000 | Users Manual - English - Page 64
    side of fabric b 6.5 mm (1/4 inch) seam allowance c Straight stitch Select stitch , or . c Turn the fabric over so that the right side d faces up, and then sew over the seam with the center of the presser foot aligned with the seam. a Needle drop point 62 a Right side of fabric
  • Brother International XR-9000 | Users Manual - English - Page 65
    the sewing machine may be damaged. Manually pass the thread through the eye of the needle from the front to the back. For details, refer to "Upper threading" (page 17). Insert the wing needle. a • Use a 130/705H 100/16 wing needle. • For details on inserting a needle, refer to "Replacing the needle
  • Brother International XR-9000 | Users Manual - English - Page 66
    SEWING CHARACTERS (for models the selected character. N Turn on the sewing machine. a Press the character stitch key and presser foot to use • For details, refer to "Replacing the presser foot" (page 25). If you would like to only sew this single f character, start sewing. If you would like to sew
  • Brother International XR-9000 | Users Manual - English - Page 67
    of characters will be stored in memory even if you turn off the machine. Press (stitch selection keys) to select the b next character, "O" (No. 15). ■ Adding new characters after sewing After sewing a combination of characters, you N can add characters to the combination using the following
  • Brother International XR-9000 | Users Manual - English - Page 68
    VARIOUS STITCHES ■ Making a new combination of characters after sewing Memo ● When you have finished sewing, the pattern No. of the first character in the current combination is shown on the LCD. N Checking characters You can check the characters in a combination
  • Brother International XR-9000 | Users Manual - English - Page 69
    characters" (page 64) Attach monogramming foot "N". b • For details, refer to "Replacing the presser foot" (page 25). Start sewing. c X The stitch is sewn in the direction indicated by the arrow. Memo ● When sewing characters, the machine automatically sews reinforcement stitches for each character
  • Brother International XR-9000 | Users Manual - English - Page 70
    the same conditions as the real sewing, and adjust the stitch pattern as shown below. Memo ● The character stitches "034" (No. 31 + No. 34+ No. 35) are used for making adjustments. Attach monogramming foot "N". a • For details, refer to "Replacing the presser foot" (page 25). Combine the character
  • Brother International XR-9000 | Users Manual - English - Page 71
    characters "034" again. f Memo ● You can sew when you are in the stitch adjustment mode. If the stitch pattern still comes out poorly, adjust the stitch again. Adjust the stitch until the
  • Brother International XR-9000 | Users Manual - English - Page 72
    in the bobbin case; therefore, it should be cleaned periodically. CAUTION ● Make sure you unplug the machine before you clean it. Otherwise, you may get an electric shock or be injured. Switch the machine off and unplug it. a Raise the needle and the presser foot. b Loosen the presser-foot screw and
  • Brother International XR-9000 | Users Manual - English - Page 73
    needle may break or sewing performance may suffer. For a new bobbin case (part code: XC3152-021), contact your nearest authorized service center. 4 ● Make sure that you fit the bobbin case properly, otherwise the needle may break. • Do not put oil on the bobbin case. Insert the bobbin case
  • Brother International XR-9000 | Users Manual - English - Page 74
    Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at [http://solutions.brother.com]. If the problem persists, contact your dealer or the nearest authorized service center. Symptom The sewing machine does not work. The needle breaks. The upper thread breaks. Possible cause
  • Brother International XR-9000 | Users Manual - English - Page 75
    the presser foot. Contact your retailer or the nearest authorized service center. - The bobbin case is scratched, or has a burr on it. Replace the bobbin case. Contact your retailer or the nearest authorized service center. - You have not used a bobbin that has been designed for this machine
  • Brother International XR-9000 | Users Manual - English - Page 76
    . Replace the bobbin case. Contact your retailer or the nearest authorized service center. page 17 - You have not used bobbin that has been designed for this machine. Incorrect bobbins will not work properly. Only use a bobbin that has been designed for this machine. page 12 The needle threader
  • Brother International XR-9000 | Users Manual - English - Page 77
    thread before continuing the operation. Note ● If error message "F1" through "F8" appears in the LCD while the sewing machine is being used, the machine may be malfunctioning. Contact your nearest authorized service center. Operation beep (for models equipped with the operation beep) Each time
  • Brother International XR-9000 | Users Manual - English - Page 78
    presser foot holder 6, 26 presser foot lever 6, 17 pre-tension disk 12 Q quick-set bobbin 6, 16 quilting 55 quilting foot 56 quilting guide 55 R reinforcement stitching 57 reverse/reinforcement stitch button 6 S scallop stitching 61 seam ripper 48 sewing machine needles 21 sewing speed
  • Brother International XR-9000 | Users Manual - English - Page 79
    34 thread cutter 30 thread guide 17 thread tension 31 trial sewing 32 triple stretch stitch 43 troubleshooting 72 twin needle 24 U upper tension-control dial 31 upper threading 17 utility stitch indicator 7, 28 utility stitch key 7, 28 W walking foot 55 wing needle 63 Z zigzag stitch
  • Brother International XR-9000 | Users Manual - English - Page 80
    English 885-S39 XE6187-001 Printed in China
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Please visit us at http://solutions.brother.com where you can get product support
and answers to frequently asked questions (FAQs).
KNOWING YOUR
SEWING MACHINE
SEWING BASICS
VARIOUS STITCHES
APPENDIX