Brother International Entrepreneur PR-650 Users Manual - English - Page 106

OTHER BASIC PROCEDURES Easily changing the thread spools When replacing the thread spools, it is necessary to re-thread the upper thread. However, the thread spools can easily be changed when replacing a thread spool whose thread is correctly threaded through the machine. Pull out the old thread just after the needle 4 bar thread guide. Cut the thread between the thread spool and 1 the thread guide. Change the thread spool. 2 Continue pulling the thread until the knot is above the needle. Cut the knot. Use the automatic needle-threading 5 mechanism to thread the needle with the new thread. (Refer to page 59.) X This completes the changing of the thread spool. Note ● When pulling out the thread, do not pull the knot through the eye of the needle. If the knot is pulled through the eye of the needle, the needle may be damaged. Tie the end of the thread on the new spool 3 with the end of the thread remaining from the previous color. 104