Brother International Entrepreneur PR-650 Users Manual - English - Page 120

EMBROIDERING SETTINGS Touch 4 to select the appliqué setting. Memo ● Three steps are added to the sewing order: appliqué cutting line, position of pattern placement on the garment, and appliqué stitching. • To cancel the setting, touch . X The steps for creating the appliqué piece are added to the sewing order. Note ● When is touched, the pattern is moved to the center. After selecting the appliqué setting, move the pattern to the desired position. ● An appliqué piece cannot be created if the pattern is too large or too complicated or a combined pattern is separated. Even if the selected pattern fits within the embroidering area, the entire appliqué pattern may exceed the embroidering area when the outline is added. If an error message appears, select a different pattern or edit it. 1 2 3 1 Cutting line for appliqué 2 Position of pattern placement on garment 3 Appliqué stitching ● We recommend using thread for the cutting line "APPLIQUE MATERIAL" that is closest to the color of the fabric. Fuse or stick a piece of stabilizer to the back 6 of the felt or denim fabric to be used as the appliqué piece. Hoop the appliqué fabric in the embroidery 7 frame, attach the embroidery frame to the machine, and then start embroidering. After the cutting line "APPLIQUE 8 MATERIAL" is embroidered, stop the machine and remove the appliqué material from the embroidery frame. Carefully cut along the stitching. After 9 cutting, carefully remove all of the cutting line thread. Touch to continue to the 5 embroidering screen. 1 Cutting line for appliqué 118