Brother International Entrepreneur PR-650 Users Manual - English - Page 202

BASIC SETTINGS AND HELP FEATURE Touch or 1 setting. The key appears as to select the desired when "ON" is selected, and it appears as when "OFF" is selected. ■ When using Tajima embroidery data (.dst) If "ON" is selected, touch and to 2 select the number of feed codes. The desired setting is displayed. • Each touch of the key turns the setting either on or off. Note ● This setting is not applied to the trimming of threads between characters in alphabet patterns. (Refer to "Trimming the threads between characters" on page 169.) Memo ● The number of jump codes cannot be specified for data other than Tajima embroidery data (.dst). • A value between 1 and 8 can be specified. For example, if 3 is specified, sequential 3 jump codes will be converted to the trim code. But sequential 2 jump codes will not be converted to the trim code, it will be sewed as the feed (jump) stitch. Note ● You need to set the jump number same as the number that was used when the particular Tajima data was created. If the jump number is not matched, either unexpected trim or no trimming at trim expected point will happen. 200