Brother International Entrepreneur PR-650 Users Manual - English - Page 206
Changing the speaker, volume, Specifying thread sensor
View all Brother International Entrepreneur PR-650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
BASIC SETTINGS AND HELP FEATURE Changing the speaker volume The volume of operation sounds (which are produced when a key is touched in a screen or a button is pressed in the operation panel) and alarm sounds (which indicate that an error has occurred) can be changed. The speaker volume can be set to "OFF" or a setting between "1" and "5". When "OFF" is selected, no sound is produced from the speaker. When the embroidery machine is purchased, "5" is selected. The speaker setting can be specified from page 4/5 of the settings screen. Touch and to select the desired 1 speaker volume. Specifying thread sensor If thread sensor is set to "OFF", the machine does not stop until embroidering is finished, even if the thread breaks or there is no more thread in the bobbin. Set thread sensor to "ON", except when it is necessary to set it to "OFF". When the machine is purchased, "ON" is selected. The thread sensor can be specified from page 4/5 of the settings screen. Touch or 1 setting. to select the desired X Check that the desired speaker volume is selected with the operation sound produced when a key is touched. Note ● Normally, set thread sensor to "ON". When thread sensor is set to "OFF", the machine will not be able to detect if the upper thread has become tangled. Continuing to use the machine with tangled thread may cause damage. 204