Brother International Entrepreneur PR-650 Users Manual - English - Page 220

APPENDIX Touch (unlock key), and then press 6 the start/stop button to begin embroidering. Correct thread tension. From the wrong side 7 of the fabric, the bobbin thread should be about one third of the stitch width. Sewing a pattern aligned with a mark on the fabric By specifying the beginning of stitching and the end of stitching, the exact position of the pattern can be checked. For example, when sewing text along a line in the fabric pattern, the beginning of the stitching can be set in the lower-left corner so that the position can be checked, and then the beginning of stitching can be reset. Next, the beginning of stitching can be set in the lower-right corner to check the position. The straight line connecting the first point and the second point is the baseline for the text. If the baseline that the text follows leaves the fabric pattern, the embroidering position can be adjusted. Touch 1 screen. in the embroidering settings Note ● If adjustment is necessary, refer to instructions on page 67 or 112/113. Set the beginning of stitching in the lower2 left corner. X The frame moves so that the needle drop point aligns with the beginning of stitching. 218