Brother International Entrepreneur PR-650 Users Manual - English - Page 228

APPENDIX Types of caps With the machine, we recommend that the following types of caps be embroidered. ■ Standard (Pro Style) ■ Golf Style 1 Face: Pro style 2 6 sections Otto International, Inc. cap model number (Example) Mesh backing on the back of front panels (soft or hard) Ease of framing (hooping) OTTO27-007 Constructed Unconstructed firm front soft crown Easy (Recommended) Fairly easy Backing 1 to 2 ply 2 to 3 ply ■ Low Profile (Low fitting) 1 Face: Not divided 2 5 sections Otto International, Inc. cap model number (Example) OTTO23-225 Mesh backing on the back of front panels (soft or hard) Constructed firm front Ease of framing (hooping) Fairly easy Backing 1 to 2 ply Memo ● Check if this area 1 is covered with mesh. 1 Face: Low fitting 2 6 sections Otto International, Inc. cap model number (Example) OTTO23-225 Mesh backing on the back of front panels (soft or hard) Constructed firm front Ease of framing (hooping) Very difficult (because the cap material is very hard.) Backing 1 to 2 ply OTTO18-203 Unconstructed soft crown Fairly easy 2 to 3 ply Note ● There is no centerline that can be used as a guide for placing the cap in the cap frame. Before framing the cap, use a charcoal pen to mark the centerline. 226