Brother International Entrepreneur PR-650 Users Manual - English - Page 237

Pull the ends of the cap out from the center a to remove any slack. Adjust the brim so that it maintains a d rounded shape. Use the clips to secure the cap. b X This completes the positioning of the cap in the cap frame. Remove the cap frame from the mounting e jig. Press both right and left holders on the mounting jig with both thumbs, and then pull off the embroidery frame, as shown in the illustration. 1 Clips • Repeat steps a and b on the other side to remove any slack and secure the cap with the clips. Pull the brim holder up as far as possible. c Next, turn the brim holder over the cap brim, and then lower the brim holder. 1 Holder 7 1 Brim holder 2 Centerline of brim holder • Fully lower the brim holder so that the centerline on the brim holder is visible. Using the Optional Cap Frame 235